Nur Text | Text mit Bildern

FHEM Forum

FHEM - Hausautomations-Systeme => Homematic => Thema gestartet von: eurofinder am 14 August 2019, 18:42:22

Titel: Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 14 August 2019, 18:42:22
Hallo,

Ich setzte HmIP-eTRV-2 als Thermostate ein. Diese sind per HMCCU eingebunden.
Jetzt habe ich versucht einen HmIP-eTRV-2 auf off zu schalten, indem im in FHEMWEB set Regler_Buero off ausgeführt habe. Der Befehl erscheint auch im Eventmonitor, aber der HmIP-eTRV-2 verbleibt bei seiner eingestellten Temperatur.

Führe ich in der Weboberfläche der CCU3 unter Status und Bedienung->Geräte für das Device den Befehl aus (im Controlfeld Aus wählen), dann wird der HmIP-eTRV-2 auf off gestellt - erscheint im Display.

Während unter FHEMWEB lediglich folgende Befehle im Eventmonitor erscheinen:
2019-08-14 18:35:36 HMCCUDEV Regler_Buero off
2019-08-14 18:35:36 HMCCUDEV Regler_Buero 1.ACTUAL_TEMPERATURE: 22.7

erhalte ich unter der Weboberfläche der CCU3 folgende Einträge:
2019-08-14 18:36:38 HMCCUDEV Regler_Buero 1.SET_POINT_MODE: 1
2019-08-14 18:36:38 HMCCUDEV Regler_Buero 1.SET_POINT_TEMPERATURE: off
2019-08-14 18:36:38 HMCCUDEV Regler_Buero control: 4.5
2019-08-14 18:36:38 HMCCUDEV Regler_Buero off
2019-08-14 18:36:38 HMCCUDEV Regler_Buero hmstate: off

Was mache ich falsch?

Hier mal Device:
Code Auswählen
Internals:
   DEF        000A18A9A654B1
   FUUID      5d41b066-f33f-c10b-390d-40c0c55eee431682
   IODev      d_ccu
   NAME       Regler_Buero
   NR         122
   STATE      Raumtemperatur: 22.8  °C<br/>Soll: 21.0 °C<br/>Fenster: <b>closed</b>
   TYPE       HMCCUDEV
   ccuaddr    000A18A9A654B1
   ccudevstate active
   ccuif      HmIP-RF
   ccuname    Regler_Buero
   ccutype    HmIP-eTRV-2
   channels   8
   firmware   2.2.8
   statevals  devstate
   Helper:
     DBLOG:
       1.ACTUAL_TEMPERATURE:
         logdb:
           TIME       1565800695.4021
           VALUE      22.8
   READINGS:
     2019-08-14 18:38:24   0.OPERATING_VOLTAGE 2.9
     2019-08-14 18:38:24   0.OPERATING_VOLTAGE_STATUS 0
     2019-08-14 18:38:24   1.ACTUAL_TEMPERATURE 22.8
     2019-08-14 18:38:24   1.ACTUAL_TEMPERATURE_STATUS 0
     2019-08-14 18:38:24   1.BOOST_MODE    0
     2019-08-14 18:38:24   1.SET_POINT_MODE 0
     2019-08-14 18:38:24   1.SET_POINT_TEMPERATURE 21.0
     2019-08-14 18:38:24   1.WINDOW_STATE  closed
     2019-08-14 18:38:24   control         21.0
     2019-08-14 18:38:24   hmstate         21.0
     2019-08-14 18:38:24   state           21.0
     2019-08-14 18:38:24   valve_position  100
     2019-08-14 18:38:24   valve_position_STATUS 0
   hmccu:
     devspec    000A18A9A654B1
     dp:
       0.CONFIG_PENDING:
         OVAL       0
         VAL        0
       0.DUTY_CYCLE:
         OVAL       0
         VAL        0
       0.INSTALL_TEST:
         OVAL       true
         VAL        true
       0.LOW_BAT:
         OVAL       0
         VAL        0
       0.OPERATING_VOLTAGE:
         OSVAL      2.9
         OVAL       2.9
         SVAL       2.9
         VAL        2.9
       0.OPERATING_VOLTAGE_STATUS:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       0.RSSI_DEVICE:
         OVAL       -50
         VAL        -49
       0.RSSI_PEER:
         OVAL       -50
         VAL        -49
       0.UNREACH:
         OVAL       0
         VAL        0
       0.UPDATE_PENDING:
         OVAL       false
         VAL        false
       1.ACTIVE_PROFILE:
         OVAL       1
         VAL        1
       1.ACTUAL_TEMPERATURE:
         OSVAL      22.8
         OVAL       22.8
         SVAL       22.8
         VAL        22.8
       1.ACTUAL_TEMPERATURE_STATUS:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       1.BOOST_MODE:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       1.BOOST_TIME:
         OVAL       0
         VAL        0
       1.FROST_PROTECTION:
         OVAL       0
         VAL        0
       1.LEVEL:
         OSVAL      100
         OVAL       1.0
         SVAL       100
         VAL        1.0
       1.LEVEL_STATUS:
         OSVAL      0
         OVAL       0
         SVAL       0
         VAL        0
       1.PARTY_MODE:
         OVAL       0
         VAL        0
       1.PARTY_SET_POINT_TEMPERATURE:
         OVAL       0.000000
         VAL        0.000000
       1.PARTY_TIME_END:
         OVAL       
         VAL       
       1.PARTY_TIME_START:
         OVAL       
         VAL       
       1.QUICK_VETO_TIME:
         OVAL       0
         VAL        0
       1.SET_POINT_MODE:
         OSVAL      1
         OVAL       1
         SVAL       0
         VAL        0
       1.SET_POINT_TEMPERATURE:
         OSVAL      21.5
         OVAL       21.5
         SVAL       21.0
         VAL        21.0
       1.SWITCH_POINT_OCCURED:
         OVAL       0
         VAL        0
       1.VALVE_ADAPTION:
         OVAL       false
         VAL        false
       1.VALVE_STATE:
         OVAL       4
         VAL        4
       1.WINDOW_STATE:
         OSVAL      closed
         OVAL       0
         SVAL       closed
         VAL        0
Attributes:
   DbLogInclude 1.ACTUAL_TEMPERATURE
   IODev      d_ccu
   alias      Büro
   ccureadingfilter ^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
   ccureadingname 1.LEVEL:valve_position
   ccuscaleval LEVEL:0:1:0:100
   controldatapoint 1.SET_POINT_TEMPERATURE
   event-on-change-reading .*
   eventMap   /datapoint 1.BOOST_MODE true:Boost/datapoint 1.CONTROL_MODE 0:Auto/datapoint 1.CONTROL_MODE 1:Manual/datapoint 1.CONTROL_MODE 2:Holiday/datapoint 1.SET_POINT_TEMPERATURE 4.5:off/datapoint 1.SET_POINT_TEMPERATURE 30.5:on/
   genericDeviceType thermostat
   group      Regler
   icon       hc_wht_regler
   room       EG,EG->Büro,Homematic
   stateFormat Raumtemperatur: 1.ACTUAL_TEMPERATURE  °C<br/>Soll: 1.SET_POINT_TEMPERATURE °C<br/>Fenster: <b>1.WINDOW_STATE</b>
   statedatapoint 1.SET_POINT_TEMPERATURE
   stripnumber 1
   substexcl  control
   substitute SET_POINT_TEMPERATURE!#0-4.5:off,#30.5-40:on;WINDOW_STATE!(0|false):closed,(1|true):open
   userReadings battery
   webCmd     control:Boost:Auto:Manual:Holiday:on:off
   widgetOverride control:slider,4.5,0.5,30.5,1

Würde mich über Hinweise/Hilfe freuen.

Gruß
eurofinder
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: zap am 14 August 2019, 20:24:44
Gibt es Logfile Einträge, wenn Du den Befehl ausführst?
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 14 August 2019, 22:24:22
@zap:
Keine Logeinträge bei Aufruf über FHEMWEB oder CCUR Weboberfläche.

Gruß
eurofinder
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: zap am 15 August 2019, 19:21:54
Dann setze mal das Attribut ccuflags auf trace und verbose auf mindestens 2. Dann sollten beim Schalten Logeinträge kommen.
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 15 August 2019, 20:27:38
@zap:

Hier mal ein Logeintrag, nachdem ich wieder versucht habe, den Regler per FHEMWEB auf off zu setzen:

Code Auswählen
2019.08.15 20:20:24 2: HMCCUDEV: SetMultipleDatapoints: dpt=001.HmIP-RF.000A18A9A654B1:1.SET_POINT_TEMPERATURE, value=4.5
2019.08.15 20:20:24 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=SET_POINT_TEMPERATURE, valid=1
2019.08.15 20:20:24 2: HMCCUDEV: HMCommand: URL=http://192.168.x.y:zzzz/tclrega.exe, cmd=(datapoints.Get("HmIP-RF.000A18A9A654B1:1.SET_POINT_TEMPERATURE")).State(4.5);

2019.08.15 20:20:26 2: HMCCUDEV: HMCommand: Response=<xml><exec>/tclrega.exe</exec><sessionId></sessionId><httpUserAgent>User-Agent: fhem</httpUserAgent></xml>, Value=
2019.08.15 20:20:26 2: HMCCUDEV: GetAttrSubstitute: subst = SET_POINT_TEMPERATURE!#0-4.5:off,#30.5-40:on;WINDOW_STATE!(0|false):closed,(1|true):open
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: Regler_Buero Objects = 000A18A9A654B1
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: Processing object 000A18A9A654B1
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=DUTY_CYCLE, key=0.DUTY_CYCLE, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=DUTY_CYCLE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=RSSI_PEER, key=0.RSSI_PEER, value=-49
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=RSSI_PEER, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=LOW_BAT, key=0.LOW_BAT, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=LOW_BAT, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=RSSI_DEVICE, key=0.RSSI_DEVICE, value=-51
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=RSSI_DEVICE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=OPERATING_VOLTAGE_STATUS, key=0.OPERATING_VOLTAGE_STATUS, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=OPERATING_VOLTAGE_STATUS, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=0.OPERATING_VOLTAGE_STATUS, orgvalue=0 value=0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=CONFIG_PENDING, key=0.CONFIG_PENDING, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=CONFIG_PENDING, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=UNREACH, key=0.UNREACH, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=UNREACH, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:0, dpt=OPERATING_VOLTAGE, key=0.OPERATING_VOLTAGE, value=2.9
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:0, chnnam=Regler_Buero:0 chnnum=0 dpt=OPERATING_VOLTAGE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=0.OPERATING_VOLTAGE, orgvalue=2.9 value=2.9 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: text=^0\.UNREACH!(1|true):unreachable;^[0-9]\.LOW_?BAT!(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.RSSI_DEVICE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SWITCH_POINT_OCCURED
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTUAL_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.DUTY_CYCLE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.QUICK_VETO_TIME
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTUAL_TEMPERATURE_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_TIME_START
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.LOW_BAT
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.WINDOW_STATE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.BOOST_TIME
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.FROST_PROTECTION
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.LEVEL
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_SET_POINT_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.UPDATE_PENDING
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.RSSI_PEER
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.INSTALL_TEST
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SET_POINT_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.VALVE_ADAPTION
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.LEVEL_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTIVE_PROFILE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.BOOST_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_TIME_END
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.OPERATING_VOLTAGE_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.CONFIG_PENDING
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.VALVE_STATE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SET_POINT_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: text=^0\.UNREACH!(1|true):unreachable;^[0-9]\.LOW_?BAT!(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: rule=^0\.UNREACH!(1|true):unreachable, dptexpr=^0\.UNREACH, subst=(1|true):unreachable
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.RSSI_DEVICE match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.SWITCH_POINT_OCCURED match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.UNREACH match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: rule=^[0-9]\.LOW_?BAT!(1|true):warn_battery, dptexpr=^[0-9]\.LOW_?BAT, subst=(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.RSSI_DEVICE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.SWITCH_POINT_OCCURED match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.UNREACH match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.OPERATING_VOLTAGE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.DUTY_CYCLE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.QUICK_VETO_TIME match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.PARTY_MODE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE_STATUS match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.PARTY_TIME_START match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.LOW_BAT match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetAttrSubstitute: subst = SET_POINT_TEMPERATURE!#0-4.5:off,#30.5-40:on;WINDOW_STATE!(0|false):closed,(1|true):open
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: Regler_Buero Objects = 000A18A9A654B1
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: Processing object 000A18A9A654B1
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=WINDOW_STATE, key=1.WINDOW_STATE, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=WINDOW_STATE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.WINDOW_STATE, orgvalue=0 value=closed peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=SET_POINT_TEMPERATURE, key=1.SET_POINT_TEMPERATURE, value=21.0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=SET_POINT_TEMPERATURE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.SET_POINT_TEMPERATURE, orgvalue=21.0 value=21.0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=VALVE_STATE, key=1.VALVE_STATE, value=4
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=VALVE_STATE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=BOOST_MODE, key=1.BOOST_MODE, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=BOOST_MODE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.BOOST_MODE, orgvalue=0 value=0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=ACTUAL_TEMPERATURE_STATUS, key=1.ACTUAL_TEMPERATURE_STATUS, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=ACTUAL_TEMPERATURE_STATUS, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.ACTUAL_TEMPERATURE_STATUS, orgvalue=0 value=0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=ACTUAL_TEMPERATURE, key=1.ACTUAL_TEMPERATURE, value=21.7
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=ACTUAL_TEMPERATURE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.ACTUAL_TEMPERATURE, orgvalue=21.7 value=21.7 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=ACTIVE_PROFILE, key=1.ACTIVE_PROFILE, value=1
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=ACTIVE_PROFILE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=BOOST_TIME, key=1.BOOST_TIME, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=BOOST_TIME, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=FROST_PROTECTION, key=1.FROST_PROTECTION, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=FROST_PROTECTION, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=SWITCH_POINT_OCCURED, key=1.SWITCH_POINT_OCCURED, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=SWITCH_POINT_OCCURED, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=PARTY_MODE, key=1.PARTY_MODE, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=PARTY_MODE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=QUICK_VETO_TIME, key=1.QUICK_VETO_TIME, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=QUICK_VETO_TIME, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV:     check result false
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=LEVEL_STATUS, key=1.LEVEL_STATUS, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=LEVEL_STATUS, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=valve_position_STATUS, orgvalue=0 value=0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=LEVEL, key=1.LEVEL, value=0.2
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=LEVEL, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=valve_position, orgvalue=0.2 value=20 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: dev=Regler_Buero, chnadd/object=000A18A9A654B1:1, dpt=SET_POINT_MODE, key=1.SET_POINT_MODE, value=0
2019.08.15 20:20:26 2: HMCCUDEV: FilterReading: chn=000A18A9A654B1:1, chnnam=Regler_Buero:1 chnnum=1 dpt=SET_POINT_MODE, rules=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV:     check rm=1 f=^ACTUAL_TEMPERATURE|^BOOST_MODE|^SET_POINT_MODE|^SET_POINT_TEMPERATURE|^LEVEL|^WINDOW_STATE|^OPERATING_VOLTAGE cn= c=
2019.08.15 20:20:26 2: HMCCUDEV: UpdateSingleDevice: device=Regler_Buero, readings=1.SET_POINT_MODE, orgvalue=0 value=0 peer=null
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: text=^0\.UNREACH!(1|true):unreachable;^[0-9]\.LOW_?BAT!(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.RSSI_DEVICE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SWITCH_POINT_OCCURED
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTUAL_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.OPERATING_VOLTAGE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.DUTY_CYCLE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.QUICK_VETO_TIME
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTUAL_TEMPERATURE_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_TIME_START
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.LOW_BAT
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.WINDOW_STATE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.BOOST_TIME
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.FROST_PROTECTION
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.LEVEL
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_SET_POINT_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.UPDATE_PENDING
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.RSSI_PEER
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.INSTALL_TEST
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SET_POINT_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.VALVE_ADAPTION
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.LEVEL_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.ACTIVE_PROFILE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.BOOST_MODE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.PARTY_TIME_END
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.OPERATING_VOLTAGE_STATUS
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=0.CONFIG_PENDING
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.VALVE_STATE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: var=1.SET_POINT_TEMPERATURE
2019.08.15 20:20:26 2: HMCCUDEV: HMCCU_SubstVariables: text=^0\.UNREACH!(1|true):unreachable;^[0-9]\.LOW_?BAT!(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: rule=^0\.UNREACH!(1|true):unreachable, dptexpr=^0\.UNREACH, subst=(1|true):unreachable
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.RSSI_DEVICE match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.SWITCH_POINT_OCCURED match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.UNREACH match ^0\.UNREACH
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: rule=^[0-9]\.LOW_?BAT!(1|true):warn_battery, dptexpr=^[0-9]\.LOW_?BAT, subst=(1|true):warn_battery
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.RSSI_DEVICE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.SWITCH_POINT_OCCURED match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.UNREACH match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.OPERATING_VOLTAGE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.DUTY_CYCLE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.QUICK_VETO_TIME match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.PARTY_MODE match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.ACTUAL_TEMPERATURE_STATUS match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 1.PARTY_TIME_START match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: GetHMState: Check 0.LOW_BAT match ^[0-9]\.LOW_?BAT
2019.08.15 20:20:26 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=ON_TIME, valid=0
2019.08.15 20:20:26 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=LEVEL, valid=1
2019.08.15 20:20:26 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=ON_TIME, valid=0
2019.08.15 20:20:26 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=LEVEL, valid=1
2019.08.15 20:20:28 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=ON_TIME, valid=0
2019.08.15 20:20:28 2: HMCCUDEV: IsValidDatapoint: devtype=HmIP-eTRV-2, chnno=1, dpt=LEVEL, valid=1

Ich erkenne da jedenfalls nichts.

Gruß
eurofinder
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: zap am 16 August 2019, 08:20:34
kannst du andere HmIP Geräte steuern?
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 16 August 2019, 20:47:13
@zap:
Ich kann zum Beispiel im FHEMWEB die Temperatur per Schieberegler einstellen oder per set-Befehl. Klappt auch an anderen Reglern.
Kein Regler kann ich per set-Befehl auf off setzen.

Gruß
eurofinder
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: zap am 17 August 2019, 08:11:38
Versuche mal folgendes:

Code Auswählen
set Regler_Buero datapoint 1.CONTROL_MODE 1 1.SET_POINT_TEMPERATURE 4.5


   
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 17 August 2019, 10:39:53
@zap:
Zitatset Regler_Buero datapoint 1.CONTROL_MODE 1 1.SET_POINT_TEMPERATURE 4.5

Regler fährt in Position off, aber ich erhalte folgende Meldung:
Zitatjquery.min.js line 2:
Error: Syntax error, unrecognized expression: tr.menuTree[data-nxt=-\>ASC,OG,OG]

Wie bekomme ich es jetzt aber hin, dass wenn ic hauf dem FHEMWEB-Frontend auf off klicke, der Befehl ausgeführt wird (ohne Fehlermeldung):-)

Gruß, danke für die Hilfe und schönes Wochenende
eurofinder
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: zap am 17 August 2019, 16:56:23
Das eventMap Attribut anpassen:

Code Auswählen
eventMap /datapoint 1.BOOST_MODE true:Boost/datapoint 1.CONTROL_MODE 0:Auto/datapoint 1.CONTROL_MODE 1:Manual/datapoint 1.CONTROL_MODE 2:Holiday/datapoint 1.CONTROL_MODE 1 1.SET_POINT_TEMPERATURE 4.5:off/datapoint 1.SET_POINT_TEMPERATURE 30.5:on/

Der andere Fehler kommt vom UI, da kann ich Dir nicht helfen. Du verwendest ziemlich viele Sonderzeichen in Deiner Device Definition, die nicht alle HTML kompatibel sind.
Titel: Antw:Wie HmIP-eTRV-2 im FHEMWEB auf off schalten?
Beitrag von: eurofinder am 19 August 2019, 08:27:47
@zap:
Danke, das scheint jetzt zu funktionieren:-)

Gruß
eurofinder
Nur Text | Text mit Bildern