FHEM Forum

Hallo,

ich versuche gerade Zwischenstecker von Obi anzulernen, bekomme auch Devices angelegt, kann diese dann aber nicht über FHEM schalten.

Ich vermute es liegt am Protokoll? Meine smartwares Zwischenstecker funktionieren einwandfrei (protocol V3). Kann mir jemand sagen, ob ich sie lieber verschenken soll, oder ob es Hoffnung gibt, sie in meinem Setup ans Laufen zu bringen?

Hier die Infos: Nach dem Anlernen des Zwischensteckers mit der Fernbedienung sind zwei neue Devices angelegt:

Device 1
Internals
CFGFN
DEF    FF1100FF 0100 1000
FUUID 5da44960-f33f-222b-81b8-8a04fea01afc34a6
IODev sduino1
LASTInputDev sduino1
MSGCNT 1
NAME IT_FF1100FF
NR 113
STATE off
TYPE IT
XMIT ff1100ff
XMITdimdown 00
XMITdimup 00
XMIToff 1000
XMITon 0100
sduino1_DMSG i5F0530
sduino1_MSGCNT 1
sduino1_Protocol_ID 55
sduino1_RAWMSG MS;P0=-599;P1=919;P3=-1083;P6=299;P7=-2325;D=67631063101010101063636363631063106363101063636363;CP=6;SP=7;R=37;O;
sduino1_RSSI -55.5
sduino1_TIME 2019-10-14 12:11:17
Readings
protocol SBC_FreeTec
state off

Device 2
Internals
CFGFN
DEF 1527x5a98b 0000 0000
FUUID 5da449c5-f33f-222b-8233-57f41bbb5832bff6
IODev sduino1
NAME IT_1527x5a98b
NR 121
STATE off
TYPE IT
XMIT ffdddfd0d1
XMITdimdown 00
XMITdimup 00
XMIToff 0000
XMITon 0000
Readings
protocol EV1527
state off

OK,

also in der FHEM-Referenz habe ich Folgendes beim Protokoll EV1527 gefunden:

ZitatNach dem Anlegen per autocreate muss noch der on/off- und optional der dimcode beim define (DEF) angepasst werden.

Nach dem Lesen einiger anderer Fragen zum gleichen Thema habe ich mittels

defmod IT_1527x5a98b IT 1527x5a98b 0001 0010 0100 1000

versucht diese Zeile der Referenz zu befolgen.

Die Def-Zeile meines Device 2 sieht jetzt so aus:

DEF 1527x5a98b 0001 0010 0100 1000

war vorher s.o.

DEF 1527x5a98b 0000 0000

Leider schaltet der Zwischenstecker immer noch nicht...

Zitatsduino1_RAWMSG MS;P0=-599;P1=919;P3=-1083;P6=299;P7=-2325;D=67631063101010101063636363631063106363101063636363;CP=6;SP=7;R=37;O;

Kannst Du bitte für alle vier Kanäle (ABCD) jeweils für on und off die RAWMSG posten?

Gruß Ralf

Ich habe hier den Logauszug für on und off per Handfernbedienung.

Und ja, auch ich kann hier das "Unknown code ..., help me!" sehen, habe aber keine Ahnung, wie das zu beheben ist.

Danke für Eure Hilfe.

2019.10.14 21:14:59 4: sduino1/msg READ: MU;P0=2909;P1=-7146;P2=430;P3=248;P4=-1083;P5=936;P6=-589;D=3456345656345656343456565634563434563434343434340124562456562456562424565656245624245624242424242401245624565624565624245656562456242456242424242424012456245656245656242456565624562424562424242424240124562456562456562424565656245624245624242424242;CP=2;R=33;
2019.10.14 21:14:59 4: sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2019.10.14 21:14:59 4: sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate
2019.10.14 21:14:59 4: sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A4C5BF length 24 dispatch(1/4) RSSI = -57.5
2019.10.14 21:14:59 4: SIGNALduino_unknown incomming msg: u27#A4C5BF
2019.10.14 21:14:59 4: SIGNALduino_unknown rawData: A4C5BF
2019.10.14 21:14:59 4: SIGNALduino_unknown Protocol: 27
2019.10.14 21:14:59 4: SIGNALduino_unknown converted to bits: 101001001100010110111111
2019.10.14 21:14:59 4: SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)
2019.10.14 21:14:59 4: Unknown, please report
2019.10.14 21:14:59 4: SIGNALduino_unknown incomming msg: u27#A4C5BF
2019.10.14 21:14:59 4: SIGNALduino_unknown rawData: A4C5BF
2019.10.14 21:14:59 4: SIGNALduino_unknown Protocol: 27
2019.10.14 21:14:59 4: SIGNALduino_unknown converted to bits: 101001001100010110111111
2019.10.14 21:14:59 4: SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)
2019.10.14 21:14:59 4: Unknown, please report
2019.10.14 21:14:59 3: sduino1: Unknown code u27#A4C5BF, help me!
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A4C5BF length 24 dispatch(2/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1 Dispatch: u27#A4C5BF, Dropped due to short time or equal msg
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A4C5BF length 24 dispatch(3/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1 Dispatch: u27#A4C5BF, Dropped due to short time or equal msg
2019.10.14 21:14:59 4: sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate
2019.10.14 21:14:59 4: sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(1/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(2/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1 Dispatch: U49#5B3A40, Dropped due to short time or equal msg
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(3/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1 Dispatch: U49#5B3A40, Dropped due to short time or equal msg
2019.10.14 21:14:59 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(4/4) RSSI = -57.5
2019.10.14 21:14:59 4: sduino1 Dispatch: U49#5B3A40, Dropped due to short time or equal msg
2019.10.14 21:15:01 4: sduino1/msg READ: MC;LL=-1109;LH=903;SL=-591;SH=399;D=2AA52AA52A8;C=500;L=42;R=33;
2019.10.14 21:15:01 4: sduino1: Found manchester Protocol id 52 clock 500 RSSI -57.5 -> Oregon Scientific PIR
2019.10.14 21:15:01 4: sduino1/msg READ: MC;LL=-1109;LH=903;SL=-591;SH=399;D=4AA52AA52A8;C=500;L=42;R=33;
2019.10.14 21:15:01 4: sduino1: Found manchester Protocol id 52 clock 500 RSSI -57.5 -> Oregon Scientific PIR
2019.10.14 21:15:01 4: sduino1/msg READ: MC;LL=-1109;LH=903;SL=-591;SH=399;D=4AA52AA52A8;C=500;L=42;R=33;
2019.10.14 21:15:01 4: sduino1: Found manchester Protocol id 52 clock 500 RSSI -57.5 -> Oregon Scientific PIR
2019.10.14 21:15:01 4: sduino1/msg READ: MC;LL=-1109;LH=903;SL=-591;SH=399;D=4AA52AA52A8;C=500;L=41;R=33;
2019.10.14 21:15:01 4: sduino1: Found manchester Protocol id 52 clock 500 RSSI -57.5 -> Oregon Scientific PIR

Da ist nichts dabei, das wie eine Nachricht von der Fernbedienung aussieht.
Die rawmsg müssten eigentlich mit MS anfangen, z.B.:
MS;P0=-599;P1=919;P3=-1083;P6=299;P7=-2325;D=67631063101010101063636363631063106363101063636363;CP=6;SP=7;R=37;O;

Und hier ein neuer Versuch, diesesmal mit "sduino1/msg READ: MS;..."

2019.10.14 22:09:39 4: sduino1/msg READ: MS;P1=322;P2=-2307;P3=-1059;P4=950;P5=-570;D=12134513454513454513134545451345131345131313131313;CP=1;SP=2;R=229;O;
2019.10.14 22:09:39 4: sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000
2019.10.14 22:09:39 4: sduino1: Decoded matched MS Protocol id 55 dmsg i5B3A40 length 24  RSSI = -87.5
2019.10.14 22:09:39 4: sduino1 IT: message "i5B3A40" (7)
2019.10.14 22:09:39 4: sduino1 IT: msgcode "" (0) bin = 010110110011101001000000
2019.10.14 22:09:39 4: sduino1 IT: 1527x5b3a4 not defined (Switch code: 0000)
2019.10.14 22:09:39 4: autocreate: received 1 event(s) for 'IT 1527x5b3a4 0000 0000' during the last 30 seconds
2019.10.14 22:09:39 4: autocreate: ignoring event for 'IT 1527x5b3a4 0000 0000': at least 2 needed
2019.10.14 22:09:41 4: sduino1/msg READ: MU;P0=-1069;P1=930;P2=-567;P3=441;P4=2964;P5=-7084;D=01230121230121230301212123012303012303030303030453012301212301212303012121230123030123030303030304530123012123012123030121212301230301230303030303;CP=3;R=228;
2019.10.14 22:09:41 4: sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2019.10.14 22:09:41 4: sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate
2019.10.14 22:09:41 4: sduino1: Decoded matched MU Protocol id 19 dmsg u19#B67480 length 24 dispatch(1/4) RSSI = -88
2019.10.14 22:09:41 4: SIGNALduino_unknown incomming msg: u19#B67480
2019.10.14 22:09:41 4: SIGNALduino_unknown rawData: B67480
2019.10.14 22:09:41 4: SIGNALduino_unknown Protocol: 19
2019.10.14 22:09:41 4: SIGNALduino_unknown converted to bits: 101101100111010010000000
2019.10.14 22:09:41 4: SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)
2019.10.14 22:09:41 4: Unknown, please report
2019.10.14 22:09:41 3: sduino1: Unknown code u19#B67480, help me!
2019.10.14 22:09:41 4: sduino1: Decoded matched MU Protocol id 19 dmsg u19#5B3A40 length 24 dispatch(2/4) RSSI = -88
2019.10.14 22:09:41 4: SIGNALduino_unknown incomming msg: u19#5B3A40
2019.10.14 22:09:41 4: SIGNALduino_unknown rawData: 5B3A40
2019.10.14 22:09:41 4: SIGNALduino_unknown Protocol: 19
2019.10.14 22:09:41 4: SIGNALduino_unknown converted to bits: 010110110011101001000000
2019.10.14 22:09:41 4: SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)
2019.10.14 22:09:41 4: Unknown, please report
2019.10.14 22:09:41 3: sduino1: Unknown code u19#5B3A40, help me!
2019.10.14 22:09:41 4: sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate
2019.10.14 22:09:41 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A4C5BF length 24 dispatch(1/4) RSSI = -88
2019.10.14 22:09:41 4: SIGNALduino_unknown incomming msg: u27#A4C5BF
2019.10.14 22:09:41 4: SIGNALduino_unknown rawData: A4C5BF
2019.10.14 22:09:41 4: SIGNALduino_unknown Protocol: 27
2019.10.14 22:09:41 4: SIGNALduino_unknown converted to bits: 101001001100010110111111
2019.10.14 22:09:41 4: SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)
2019.10.14 22:09:41 4: Unknown, please report
2019.10.14 22:09:41 3: sduino1: Unknown code u27#A4C5BF, help me!
2019.10.14 22:09:41 4: sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate
2019.10.14 22:09:41 4: sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate
2019.10.14 22:09:41 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(1/4) RSSI = -88
2019.10.14 22:09:41 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5B3A40 length 24 dispatch(2/4) RSSI = -88
2019.10.14 22:09:41 4: sduino1 Dispatch: U49#5B3A40, Dropped due to short time or equal msg
2019.10.14 22:09:43 4: sduino1/msg READ: MU;P0=-611;P1=375;P2=-1132;P3=893;P4=2936;P5=-7130;D=01230303030123030121212303030121230121212121245123012303030301230301212123030301212301212121212451230123030303012303012121230303012123012121212124512301230303030123030121212303030121230121212121;CP=1;R=223;
2019.10.14 22:09:43 4: sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2019.10.14 22:09:43 4: sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 19 dmsg u19#7B1C80 length 24 dispatch(1/4) RSSI = -90.5
2019.10.14 22:09:43 4: SIGNALduino_unknown incomming msg: u19#7B1C80
2019.10.14 22:09:43 4: SIGNALduino_unknown rawData: 7B1C80
2019.10.14 22:09:43 4: SIGNALduino_unknown Protocol: 19
2019.10.14 22:09:43 4: SIGNALduino_unknown converted to bits: 011110110001110010000000
2019.10.14 22:09:43 4: SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)
2019.10.14 22:09:43 4: Unknown, please report
2019.10.14 22:09:43 3: sduino1: Unknown code u19#7B1C80, help me!
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 19 dmsg u19#5EC720 length 24 dispatch(2/4) RSSI = -90.5
2019.10.14 22:09:43 4: SIGNALduino_unknown incomming msg: u19#5EC720
2019.10.14 22:09:43 4: SIGNALduino_unknown rawData: 5EC720
2019.10.14 22:09:43 4: SIGNALduino_unknown Protocol: 19
2019.10.14 22:09:43 4: SIGNALduino_unknown converted to bits: 010111101100011100100000
2019.10.14 22:09:43 4: SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)
2019.10.14 22:09:43 4: Unknown, please report
2019.10.14 22:09:43 3: sduino1: Unknown code u19#5EC720, help me!
2019.10.14 22:09:43 4: sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(1/4) RSSI = -90.5
2019.10.14 22:09:43 4: SIGNALduino_unknown incomming msg: u27#A138DF
2019.10.14 22:09:43 4: SIGNALduino_unknown rawData: A138DF
2019.10.14 22:09:43 4: SIGNALduino_unknown Protocol: 27
2019.10.14 22:09:43 4: SIGNALduino_unknown converted to bits: 101000010011100011011111
2019.10.14 22:09:43 4: SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)
2019.10.14 22:09:43 4: Unknown, please report
2019.10.14 22:09:43 3: sduino1: Unknown code u27#A138DF, help me!
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(2/4) RSSI = -90.5
2019.10.14 22:09:43 4: sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg
2019.10.14 22:09:43 4: sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate
2019.10.14 22:09:43 4: sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(1/4) RSSI = -90.5
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(2/4) RSSI = -90.5
2019.10.14 22:09:43 4: sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.14 22:09:43 4: sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(3/4) RSSI = -90.5
2019.10.14 22:09:43 4: sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg

Irgendwas passt da nicht so richtig.
Was für eine Firmware Version hat Dein sduino?

Wenn nicht bei allen Kanälen bei jedem Tastendruck mehrere MS-Nachrichten dabei sind, wird es etwas aufwändiger.

Obwohl dieses Jahr gekauft, scheint das schon etwas älter zu sein (März 2017) V3.3.1-dev
Ich habe hier im Forum Einiges zu dem Thema gefunden, wäre aber für einen Tipp, welche Version denn nun die "Richtige" wäre, sehr dankbar. Oder ist mit set sduino flash alles so, wie es für FHEM am Besten ist?

version V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29
versionProtocols 1.06
versionmodul v3.4.0

Ich habe eine ganz andere Frage: Denkst Du, dass das autocreate funktionieren würde (ohne weiteren manuellen Eingriff), wenn ich die richtige/aktuelle Firmware auf meinem sduino hätte?

Das aktuelle release ist z.Zt. die "R3.3.1-RC10", diese sollte eigentlich für Dich passen.
Es gibt auch noch die experimentiellen Spezial Versionen 3.3.1-exp und 3.3.1-experimental.

Wie ich schon mitbekommen habe, ist das Flashen beim radino nicht so einfach, er muss dazu in den flash Modus gebracht werden.

Zum flashen muss dann in fhem das Attribut hardware auf radino und das Attribut updateChannelFW auf testing.
Dann ein get sduino AvailableFirmware und dann beim set sduino flash die Firmware auswählen.

Ob mit der aktuellen Firmware das autocreate besser funktioniert, kann ich nicht abschätzen.
Damit das anlegen per Autocreate funktioniert, muss die Taste mehrmals hintereinander gedrückt ist.

ZitatRSSI = -88

Bei Deinem letzten Versuch hattest Du recht schlechte Empfangsbedingungen.
Der RSSI Wert sollte kleiner 80 sein

Gruß Ralf

Ich bin diese Woche beruflich unterwegs und melde mich am Freitag mit neuen Ergebnissen.

Danke und Gruß

Dieter

Und hier ein neues Log vom Einschalten (ON) per Fernbedienung:

<div class='fhemlog'>2019.10.19 16:12:05 4 : sduino1/msg READ: MU;P1=961;P3=401;P4=-1097;P6=-469;D=341634163434341634343416161634343416161634343430341234123474341234343412121234343412121234343434;CP=3;R=43;</div><div class='fhemlog'>2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:05 4 : sduino1: Decoded matched MU Protocol id 19 dmsg u19#511C70 length 24 dispatch(1/4) RSSI = -52.5</div>2019-10-19 16:12:05 SIGNALduino sduino1 DMSG u19#511C70
<div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown incomming msg: u19#511C70</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown rawData: 511C70</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown converted to bits: 010100010001110001110000</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)</div><div class='fhemlog'>2019.10.19 16:12:05 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown incomming msg: u19#511C70</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown rawData: 511C70</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown converted to bits: 010100010001110001110000</div><div class='fhemlog'>2019.10.19 16:12:05 4 : SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)</div><div class='fhemlog'>2019.10.19 16:12:05 4 : Unknown, please report</div>2019-10-19 16:12:05 SIGNALduino sduino1 UNKNOWNCODE u19#511C70
2019.10.19 16:12:05 3 : sduino1: Unknown code u19#511C70, help me!
2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate
2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 60 -> WS2000 matches, trying to demodulate
2019.10.19 16:12:05 4 : sduino1: Fingerprint for MU Protocol id 64 -> WH2 matches, trying to demodulate
<div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1/msg READ: MS;P0=-437;P3=-1194;P4=1056;P6=297;P7=-2319;D=67634063404063406340636340406363634063404063636363;CP=6;SP=7;R=37;</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MS Protocol id 55 dmsg i5A98B0 length 24  RSSI = -55.5</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 IT: message "i5A98B0" (7)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 IT: msgcode "" (0) bin = 010110101001100010110000</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 IT: message "i5A98B0" (7)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 IT: msgcode "" (0) bin = 010110101001100010110000</div>2019-10-19 16:12:06 SIGNALduino sduino1 UNKNOWNCODE i5A98B0
2019.10.19 16:12:06 3 : sduino1: Unknown code i5A98B0, help me!
<div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1/msg READ: MU;P0=-459;P1=429;P2=-1188;P3=1060;P4=2952;P5=-7100;P6=310;P7=-2308;D=01230303030301212121212301230121230301212121245123012303030303012121212123012301212303012121212451230123030303030121212121230123012123030121212124512301230303030301212121212301230121230301212121267623062303062303062623030306230626230626262626262676230623;CP=1;R=37;O;</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 26 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 26 dmsg u26#A4C5BF length 24 dispatch(1/4) RSSI = -55.5</div>2019-10-19 16:12:06 SIGNALduino sduino1 DMSG u26#A4C5BF
<div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown incomming msg: u26#A4C5BF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown rawData: A4C5BF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown Protocol: 26</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown converted to bits: 101001001100010110111111</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown sduino1 Protocol:26 | To help decode or debug, please add u26! (attr sduino1 development u26)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown incomming msg: u26#A4C5BF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown rawData: A4C5BF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown Protocol: 26</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown converted to bits: 101001001100010110111111</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown sduino1 Protocol:26 | To help decode or debug, please add u26! (attr sduino1 development u26)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : Unknown, please report</div>2019-10-19 16:12:06 SIGNALduino sduino1 UNKNOWNCODE u26#A4C5BF
<div class='fhemlog'>2019.10.19 16:12:06 3 : sduino1: Unknown code u26#A4C5BF, help me!</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A0FACF length 24 dispatch(1/4) RSSI = -55.5</div>2019-10-19 16:12:06 SIGNALduino sduino1 DMSG u27#A0FACF
<div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown incomming msg: u27#A0FACF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown rawData: A0FACF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown converted to bits: 101000001111101011001111</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown incomming msg: u27#A0FACF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown rawData: A0FACF</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown converted to bits: 101000001111101011001111</div><div class='fhemlog'>2019.10.19 16:12:06 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:06 4 : Unknown, please report</div>2019-10-19 16:12:06 SIGNALduino sduino1 UNKNOWNCODE u27#A0FACF
<div class='fhemlog'>2019.10.19 16:12:06 3 : sduino1: Unknown code u27#A0FACF, help me!</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A0FACF length 24 dispatch(2/4) RSSI = -55.5</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 Dispatch: u27#A0FACF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A0FACF length 24 dispatch(3/4) RSSI = -55.5</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1 Dispatch: u27#A0FACF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 29 -> HT12e matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 48 -> TFA Dostmann matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5F0530 length 24 dispatch(1/4) RSSI = -55.5</div>2019-10-19 16:12:06 SIGNALduino sduino1 DMSG U49#5F0530
2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5F0530 length 24 dispatch(2/4) RSSI = -55.5
2019.10.19 16:12:06 4 : sduino1 Dispatch: U49#5F0530, Dropped due to short time or equal msg
2019.10.19 16:12:06 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5F0530 length 24 dispatch(3/4) RSSI = -55.5
2019.10.19 16:12:06 4 : sduino1 Dispatch: U49#5F0530, Dropped due to short time or equal msg
2019.10.19 16:12:09 4 : sduino1/msg READ: MC;LL=-1094;LH=930;SL=-571;SH=393;D=4A52A929550;C=497;L=41;R=37;
2019.10.19 16:12:09 4 : sduino1: Found manchester Protocol id 52 clock 497 RSSI -55.5 -> Oregon Scientific PIR
2019.10.19 16:12:09 4 : sduino1/msg READ: MC;LL=-1094;LH=930;SL=-571;SH=393;D=4A52A929550;C=497;L=41;R=37;
2019.10.19 16:12:09 4 : sduino1: Found manchester Protocol id 52 clock 497 RSSI -55.5 -> Oregon Scientific PIR


Und hier ein neues Log vom Ausschalten (OFF) per Fernbedienung:

<div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1/msg READ: MU;P0=2915;P1=-7148;P2=426;P3=245;P4=-1135;P5=917;P6=-586;D=34563456565656345656343434565656343456343434343401245624565656562456562424245656562424562424242424012456245656565624565624242456565624245624242424240124562456565656245656242424565656242456242424242401245624565656562456562424245656562424562424242424;CP=2;R=47;</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(1/4) RSSI = -50.5</div>2019-10-19 16:12:46 SIGNALduino sduino1 DMSG u27#A138DF
<div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown incomming msg: u27#A138DF</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown rawData: A138DF</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown converted to bits: 101000010011100011011111</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:46 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown incomming msg: u27#A138DF</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown rawData: A138DF</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown converted to bits: 101000010011100011011111</div><div class='fhemlog'>2019.10.19 16:12:46 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:46 4 : Unknown, please report</div>2019-10-19 16:12:46 SIGNALduino sduino1 UNKNOWNCODE u27#A138DF
<div class='fhemlog'>2019.10.19 16:12:46 3 : sduino1: Unknown code u27#A138DF, help me!</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(2/4) RSSI = -50.5</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(3/4) RSSI = -50.5</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(4/4) RSSI = -50.5</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(1/4) RSSI = -50.5</div>2019-10-19 16:12:46 SIGNALduino sduino1 DMSG U49#5EC720
2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(2/4) RSSI = -50.5
2019.10.19 16:12:46 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(3/4) RSSI = -50.5
2019.10.19 16:12:46 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:46 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(4/4) RSSI = -50.5
2019.10.19 16:12:46 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:47 4 : sduino1/msg READ: MC;LL=-1152;LH=925;SL=-579;SH=419;D=494A55252A;C=512;L=40;R=45;
2019.10.19 16:12:47 4 : sduino1: Found manchester Protocol id 52 clock 512 RSSI -51.5 -> Oregon Scientific PIR
2019.10.19 16:12:47 4 : sduino1/msg READ: MC;LL=-1152;LH=925;SL=-579;SH=419;D=494A55252A;C=512;L=40;R=45;
2019.10.19 16:12:47 4 : sduino1: Found manchester Protocol id 52 clock 512 RSSI -51.5 -> Oregon Scientific PIR
2019.10.19 16:12:47 4 : sduino1/msg READ: MC;LL=-1139;LH=919;SL=-577;SH=419;D=4A524AA4AA;C=508;L=40;R=46;
2019.10.19 16:12:47 4 : sduino1: Found manchester Protocol id 52 clock 508 RSSI -51 -> Oregon Scientific PIR
2019.10.19 16:12:47 4 : sduino1/msg READ: MC;LL=-1139;LH=919;SL=-577;SH=419;D=4A524AA4AA;C=508;L=40;R=46;
2019.10.19 16:12:47 4 : sduino1: Found manchester Protocol id 52 clock 508 RSSI -51 -> Oregon Scientific PIR
<div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1/msg READ: MS;P2=-454;P3=275;P4=-2336;P5=-1218;P6=1051;D=34356235626262623562623535356262623535623535353535;CP=3;SP=4;R=46;</div><div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000</div><div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1: Decoded matched MS Protocol id 55 dmsg i5EC720 length 24  RSSI = -51</div><div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1 IT: message "i5EC720" (7)</div><div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1 IT: msgcode "" (0) bin = 010111101100011100100000</div><div class='fhemlog'>2019.10.19 16:12:47 4 : sduino1 IT: 1527x5ec72 not defined (Switch code: 0000)</div><div class='fhemlog'>2019.10.19 16:12:47 4 : autocreate: received 1 event(s) for 'IT 1527x5ec72 0000 0000' during the last 30 seconds</div><div class='fhemlog'>2019.10.19 16:12:47 4 : autocreate: ignoring event for 'IT 1527x5ec72 0000 0000': at least 2 needed</div>2019-10-19 16:12:47 Global global UNDEFINED IT_1527x5ec72 IT 1527x5ec72 0000 0000
2019.10.19 16:12:48 4 : sduino1/msg READ: MS;P0=290;P2=-470;P4=-2330;P5=-1214;P6=1043;D=04056205626262620562620505056262620505620505050505;CP=0;SP=4;R=46;
2019.10.19 16:12:48 4 : sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000
2019.10.19 16:12:48 4 : sduino1: Decoded matched MS Protocol id 55 dmsg i5EC720 length 24 RSSI = -51
2019.10.19 16:12:48 4 : sduino1 Dispatch: i5EC720, Dropped due to short time or equal msg
<div class='fhemlog'>2019.10.19 16:12:50 4 : sduino1/msg READ: MU;P0=388;P1=2919;P2=-7129;P4=-611;P5=-1115;P6=904;D=05050505051205640564646464056464050505646464050564050505050512056405646464640564640505056464640505640505050505120564056464646405646405050564646405056405050505051205640564646464056464050505646464050564050505050;CP=0;R=45;</div><div class='fhemlog'>2019.10.19 16:12:50 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:50 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:50 4 : sduino1: Decoded matched MU Protocol id 19 dmsg u19#5EC720 length 24 dispatch(1/4) RSSI = -51.5</div>2019-10-19 16:12:50 SIGNALduino sduino1 DMSG u19#5EC720
<div class='fhemlog'>2019.10.19 16:12:50 4 : SIGNALduino_unknown incomming msg: u19#5EC720</div><div class='fhemlog'>2019.10.19 16:12:50 4 : SIGNALduino_unknown rawData: 5EC720</div><div class='fhemlog'>2019.10.19 16:12:50 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.19 16:12:50 4 : SIGNALduino_unknown converted to bits: 010111101100011100100000</div><div class='fhemlog'>2019.10.19 16:12:50 4 : SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)</div><div class='fhemlog'>2019.10.19 16:12:50 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown incomming msg: u19#5EC720</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown rawData: 5EC720</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown converted to bits: 010111101100011100100000</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown sduino1 Protocol:19 | To help decode or debug, please add u19! (attr sduino1 development u19)</div><div class='fhemlog'>2019.10.19 16:12:51 4 : Unknown, please report</div>2019-10-19 16:12:51 SIGNALduino sduino1 UNKNOWNCODE u19#5EC720
<div class='fhemlog'>2019.10.19 16:12:51 3 : sduino1: Unknown code u19#5EC720, help me!</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(1/4) RSSI = -51.5</div>2019-10-19 16:12:51 SIGNALduino sduino1 DMSG u27#A138DF
<div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown incomming msg: u27#A138DF</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown rawData: A138DF</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown converted to bits: 101000010011100011011111</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:51 4 : Unknown, please report</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown incomming msg: u27#A138DF</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown rawData: A138DF</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown converted to bits: 101000010011100011011111</div><div class='fhemlog'>2019.10.19 16:12:51 4 : SIGNALduino_unknown sduino1 Protocol:27 | To help decode or debug, please add u27! (attr sduino1 development u27)</div><div class='fhemlog'>2019.10.19 16:12:51 4 : Unknown, please report</div>2019-10-19 16:12:51 SIGNALduino sduino1 UNKNOWNCODE u27#A138DF
<div class='fhemlog'>2019.10.19 16:12:51 3 : sduino1: Unknown code u27#A138DF, help me!</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(2/4) RSSI = -51.5</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DF length 24 dispatch(3/4) RSSI = -51.5</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1 Dispatch: u27#A138DF, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate</div><div class='fhemlog'>2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(1/4) RSSI = -51.5</div>2019-10-19 16:12:51 SIGNALduino sduino1 DMSG U49#5EC720
2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(2/4) RSSI = -51.5
2019.10.19 16:12:51 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(3/4) RSSI = -51.5
2019.10.19 16:12:51 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:51 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC720 length 24 dispatch(4/4) RSSI = -51.5
2019.10.19 16:12:51 4 : sduino1 Dispatch: U49#5EC720, Dropped due to short time or equal msg
2019.10.19 16:12:52 4 : sduino1/keepalive ok, retry = 0

Guten Abend @dip,

besitzt du deinen radino?
Wenn ja, dann lade dir mal bitte die https://github.com/elektron-bbs/RFFHEM/tree/dev-r34-radino-reset 00_SIGNALduino.pm herunter.
Führe ein shutdown restart aus und versuche mal auf dem normalen wege zu flashen.

Es handelt sich hier um eine Vorabversion welche bald übernommen werden wird um den radino zu flashen.
Somit solltest du diie Firmware aktuell erhalten. Danach wären noch einmal Nachrichten jeweils von on und off interessant.

LG Marco

EDIT: Dein Modell vom radino besitze ich und mit der o.g. Version klappt es zu flashen ;-)

Also nach einigem Hin und Her habe ich versucht den radino manuell zu flashen mit:

pi@raspberrypi-01:/opt/fhem/FHEM/firmware $ sudo avrdude -c arduino -b 57600 -P /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 -p m32u4 -vv -U flash:w:SIGNALduino_radinoCC1101_3321rc8.hex 2

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/root/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
         Using Programmer              : arduino
         Overriding Baud Rate          : 57600
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00

avrdude done.  Thank you.

Die LEDs am radino blinken gelb aber hinterher ist nix passiert (avrdude gibt ja auch einen Fehler). Die Version vom radino ist immer noch 331-dev

version V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29

Offenbar klappt mein Parameter -c arduino nicht ...

Hier noch der Logeintrag nach den Versuchen per Webinterface zu flashen. Das scheitert schon daran, das radino-Device zu finden:
pi@raspberrypi-01:/opt/fhem/log $ more SIGNALduino-Flash.log

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/opt/fhem/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
         Using Programmer              : avr109
         Overriding Baud Rate          : 57600
avrdude: ser_open(): can't open device "/dev/serial/by-id/usb-Unknown_radino_CC1101-if00": No such file or directory

avrdude done.  Thank you.

Hallo,
versuche bitte nach dem einspielen der Vorabversion deinen radino via FHEM zu flashen.

0) Attribute Hardware setzen
0.1) Attribut Development auf 1 setzen
1) get aviableFirmware
2) set flash ...

Mfg


Gesendet von iPhone mit Tapatalk Pro

OK, also hier noch einmal Schritt für Schritt:

Vor Schritt 1 ist die Version meines sduino-Device:
version V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29

1) Ich habe das neue Modul (https://github.com/elektron-bbs/RFFHEM/tree/dev-r34-radino-reset 00_SIGNALduino.pm) runtergeladen und als /opt/fhem/FHEM/00_SIGNALduino.pm installiert und die Datei-Benutzer gefixt, danach ein shutdown restart

alte Version vor Update:
# $Id: 00_SIGNALduino.pm 19857 2019-07-19 18:00:16Z Sidey $
#
# v34.0 (stable release 3.4)

neue Version nach Update:
# $Id: 00_SIGNALduino.pm 10488 2019-07-10 12:00:00Z v3.4.0 $
#
# v3.4.1 (Development release 3.4.x)

2) Ich habe die Attribute development, hardware, updateChannelFW  meines sduino Devices "sduino1" gesetzt:
Attributes
development 1
hardware radinoCC1101
updateChannelFW testing
verbose 5

3) Ich habe in der Webconsole eingegeben:
get sduino1 aviableFirmware

Im Log erschien:
2019.10.20 20:00:23 1 : sduino1: found availableFirmware for ESP_1M,ESP32,nano328,nanoCC1101,miniculCC1101,promini,radinoCC1101

Im Verzeichnis opt/fhem/FHEM/firmware befindet sich seitdem die Datei:

-rw-r--r-- 1 fhem dialout  77295 Oct 20 17:02 SIGNALduino_radinoCC1101_3321rc8.hex

4) Ich habe in der Webconsole eingegeben:
set sduino1 flash 3321rc8


Im Log erschien:
2019.10.20 20:09:28 4 : sduino1/keepalive ok, retry = 0
<div class='fhemlog'>2019.10.20 20:09:32 3 : sduino1: filename 3321rc8 provided, trying to flash</div><div class='fhemlog'>2019.10.20 20:09:32 5 : sduino1: avrdude found = 1</div><div class='fhemlog'>2019.10.20 20:09:32 5 : SIGNALduino sduino1: standard flashCommand is used to flash.</div><div class='fhemlog'>2019.10.20 20:09:32 3 : SIGNALduino sduino1/flash: forcing special reset for radinoCC1101 on /dev/serial/by-id/usb-Unknown_radino_CC1101-if00</div>2019-10-20 20:09:32 SIGNALduino sduino1 flash 3321rc8
2019-10-20 20:09:33 SIGNALduino sduino1 FIRMWARE UPDATE running
2019-10-20 20:09:33 SIGNALduino sduino1 FIRMWARE UPDATE with error
2019.10.20 20:09:33 3 : sduino1: ERROR: avrdude exited with error 256
2019.10.20 20:09:33 3 : Opening sduino1 device /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
2019.10.20 20:09:33 1 : sduino1: Can't open /dev/serial/by-id/usb-Unknown_radino_CC1101-if00: No such file or directory

Im Flash-Log /opt/fhem/log/SIGNALduino-Flash.log erschien:

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/opt/fhem/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
         Using Programmer              : avr109
         Overriding Baud Rate          : 57600
avrdude: ser_open(): can't open device "/dev/serial/by-id/usb-Unknown_radino_CC1101-if00": No such file or directory

avrdude done.  Thank you.



Und hier ist das list von meinem sduino1, um alle evtl. Fragen nach dem serial-Device meine rasperry gleich mit zu beantworten:

Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SIGNALduino_un:
   DEF        /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
   DMSG       W51#1840E5599A8
   DevState   initialized
   DeviceName /dev/serial/by-id/usb-Unknown_radino_CC1101-if00@57600
   FD         7
   FLASH_RESULT ERROR: avrdude exited with error
   FUUID      5cd594e9-f33f-222b-2250-fb21d0759ae97eff
   IDsNoDispatch 2,72.1,82
   ITClock    250
   LASTDMSG   W51#1840E5599A8
   LASTDMSGID 51
   MSGCNT     279
   NAME       sduino1
   NR         14
   PARTIAL   
   RAWMSG     MS;P1=421;P2=-7983;P3=-2106;P4=-4074;D=12131313141413131313141313131313131414141313141314131413141413131414131314141314131413;CP=1;SP=2;R=237;
   RSSI       -83.5
   STATE      opened
   TIME       1571595289
   TYPE       SIGNALduino
   sendworking 0
   unknownmessages 2019-10-20 18:23:00-MU;P0=-1299;P1=249;P2=-310;P3=-10800;P4=-2568;D=01210121210101212101012101212101012121012101012121012101012121012101210121012101210121012101210121012101210101212101210101212101314101210121210101212101012101212101012121012101012121012101012121012101210121012101210121012101210121012101210101212101210101;CP=1;R=248;O;#2019-10-20 18:51:21-MC;LL=-1304;LH=1265;SL=-650;SH=629;D=C9D46CF48;C=641;L=33;R=250;
   version    V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29
   versionProtocols 1.06
   versionmodul v3.4.1_dev_20.10
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|29|30|34|46|68|69|76|81|83|86|90|91|91.1|92|93|95)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79|96)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2019-10-20 20:16:46   ping            OK
     2019-10-20 17:20:25   raw             ccFactoryReset done
     2019-10-20 20:09:46   state           opened
     2019-10-20 20:09:46   version         V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29
   additionalSets:
     flash      3.3.1-exp,3.3.1-experimental,3.3.1-RC10,3.3.1-RC9,3.3.1-RC8,3.3.1-RC7
   getcmd:
   helper:
     avrdudecmd avrdude -c avr109 -b 57600 -P /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 -p atmega32u4 -vv -D -U flash:w:3321rc8 2>./log/SIGNALduino-Flash.log
     avrdudelogs flashing Arduino sduino1
hex file: 3321rc8
port: /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
command: avrdude -c avr109 -b 57600 -P /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 -p atmega32u4 -vv -D -U flash:w:3321rc8 2>[LOGFILE]

sduino1 closed
--- AVRDUDE ---------------------------------------------------------------------------------

avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/opt/fhem/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
         Using Programmer              : avr109
         Overriding Baud Rate          : 57600
avrdude: ser_open(): can't open device "/dev/serial/by-id/usb-Unknown_radino_CC1101-if00": No such file or directory

avrdude done.  Thank you.

--- AVRDUDE ---------------------------------------------------------------------------------

sduino1 reopen started

     stty_output
   keepalive:
     ok         1
     retry      0
   mcIdList:
     10
     11
     12
     18
     43
     47
     52
     57
     58
     96
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     1
     2
     3
     3.1
     4
     6
     7
     13
     13.2
     14
     15
     17
     23
     25
     33
     33.1
     33.2
     35
     41
     51
     55
     65
     72.1
     74.1
     87
     88
     90
     91.1
     93
   muIdList:
     5
     8
     9
     13.1
     16
     17.1
     19
     21
     22
     24
     26
     27
     28
     29
     30
     31
     32
     34
     36
     37
     38
     39
     40
     42
     44
     44.1
     45
     46
     48
     49
     50
     56
     59
     60
     61
     62
     63
     64
     66
     67
     69
     70
     71
     72
     73
     74
     75
     76
     77
     79
     80
     81
     82
     83
     84
     85
     86
     89
     91
     92
     94
     95
Attributes:
   development 1
   hardware   radinoCC1101
   updateChannelFW testing
   verbose    5


Nach Schritt 4 ist die Version meines sduino-Device (verständlicherweise):
version V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29

Dieser Fehler war der Grund, warum ich danach das Flashen per Console manuell versucht hatte...

Hallo,

Zitat von: dip am 20 Oktober 2019, 20:20:54

Code Auswählen Erweitern

get sduino1 aviableFirmware
Im Log erschien:

Code Auswählen Erweitern

2019.10.20 20:00:23 1 : sduino1: found availableFirmware for ESP_1M,ESP32,nano328,nanoCC1101,miniculCC1101,promini,radinoCC1101

RICHTIG !

Code Auswählen Erweitern

-rw-r--r-- 1 fhem dialout  77295 Oct 20 17:02 SIGNALduino_radinoCC1101_3321rc8.hex

4) Ich habe in der Webconsole eingegeben:

Code Auswählen Erweitern

set sduino1 flash 3321rc8

FALSCH

Nutzt du FHEM Web?

Du hast nur zur Auswahl
- set flash .... 3.3.1-exp
- set flash .... 3.3.1-experimental
...

Die 3.3.1-exp Version ist die letzte.

Wenn du via "klick" in der Oberfläche auf flash nach dem "aviableFirmware" den Flashvorgang machst, so siehst du die verfügbaren Versionen.
Dein Flashvorgang via Kommandozeile in FHEM ergibt die flasche Version. Dein Logfile sagt dir auch, die von dir angegebene Datei gibt es nicht.
Wenn du es schon nach via Datei direkt machen möchtest, so musst du den kompletten Path angeben und das File komplett.

MfG

OK, ich habe jetzt in der Webconsole, diesesmal per Klickinterface eigegeben:

set sduino1 flash 3.3.1-exp


Im Log erschien:
<div class='fhemlog'>2019.10.20 20:47:53 3 : SIGNALduino_Set flash 3.3.1-exp try to fetch github assets for tag 3.3.1-exp</div><div class='fhemlog'>2019.10.20 20:47:53 3 : SIGNALduino_Set flash 3.3.1-exp try to fetch release https://api.github.com/repos/RFD-FHEM/SIGNALDuino/releases/tags/3.3.1-exp</div>2019-10-20 20:47:53 SIGNALduino sduino1 flash 3.3.1-exp
2019.10.20 20:47:55 3 : url https://github-production-release-asset-2e65be.s3.amazonaws.com/27504581/9838b280-dd9c-11e9-812f-cd5f9371e3d8?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20191020%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20191020T184754Z&X-Amz-Expires=300&X-Amz-Signature=6b664e41845a52c72c0407792c2d4249454f51860afaf1dec1a2306e464dd311&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3DSIGNALDuino_radinocc11013.3.1-exp.hex&response-content-type=application%2Foctet-stream returned: 80142 bytes Data
2019.10.20 20:47:55 3 : sduino1: Downloaded SIGNALDuino_radinocc11013.3.1-exp.hex firmware from github-production-release-asset-2e65be.s3.amazonaws.com
2019.10.20 20:47:55 5 : sduino1: Header = HTTP/1.1 200 OK x-amz-id-2: 6BI4iVNlgbTpjaORaPG//gE2X+xzOT82MrzWBVrkPtUM1ZBr06QIBCWPnkYmZa/BUN5jbZhaN5Y= x-amz-request-id: 12F50068762DBA9C Date: Sun, 20 Oct 2019 18:47:56 GMT Last-Modified: Sun, 22 Sep 2019 22:53:46 GMT ETag: "a9c6fda8f62b78581dd5939648432768" Content-Disposition: attachment; filename=SIGNALDuino_radinocc11013.3.1-exp.hex Accept-Ranges: bytes Content-Type: application/octet-stream Content-Length: 80142 Server: AmazonS3 Connection: close
2019.10.20 20:47:55 3 : sduino1: filename FHEM/firmware/SIGNALDuino_radinocc11013.3.1-exp.hex provided, trying to flash
2019.10.20 20:47:55 5 : sduino1: avrdude found = 1
2019.10.20 20:47:55 5 : SIGNALduino sduino1: standard flashCommand is used to flash.
2019.10.20 20:47:55 3 : SIGNALduino sduino1/flash: forcing special reset for radinoCC1101 on /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
2019-10-20 20:47:56 SIGNALduino sduino1 FIRMWARE UPDATE running
2019-10-20 20:47:56 SIGNALduino sduino1 FIRMWARE UPDATE with error
2019.10.20 20:47:56 3 : sduino1: ERROR: avrdude exited with error 256
2019.10.20 20:47:56 3 : Opening sduino1 device /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
2019.10.20 20:47:56 1 : sduino1: Can't open /dev/serial/by-id/usb-Unknown_radino_CC1101-if00: No such file or directory

In SIGNALduino-Flash.log erschien:
avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/opt/fhem/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
         Using Programmer              : avr109
         Overriding Baud Rate          : 57600
avrdude: ser_open(): can't open device "/dev/serial/by-id/usb-Unknown_radino_CC1101-if00": No such file or directory

avrdude done.  Thank you.

Offenbar hat avrdude Probleme das Serial-Device /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 zu finden oder zu erkennen obwohl es da ist und von FHEM auch benutzt wird.

pi@raspberrypi-01:/dev/serial/by-id $ ls -al
lrwxrwxrwx 1 root root 13 Oct 20 20:48 usb-Unknown_radino_CC1101-if00 -> ../../ttyACM0

Zitat von: dip am 20 Oktober 2019, 20:58:42
Offenbar hat avrdude Probleme das Serial-Device /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 zu finden oder zu erkennen obwohl es da ist und von FHEM auch benutzt wird.

Code Auswählen Erweitern

pi@raspberrypi-01:/dev/serial/by-id $ ls -al
lrwxrwxrwx 1 root root 13 Oct 20 20:48 usb-Unknown_radino_CC1101-if00 -> ../../ttyACM0

Hab zwar kein Radino, schaut aber irgendwie komisch aus. Hilft ggf. diese Anleitung weiter http://wiki.in-circuit.de/index.php5?title=radino/radino32_software#Upload_binary_on_radino (http://wiki.in-circuit.de/index.php5?title=radino/radino32_software#Upload_binary_on_radino)? Durch Marcus weißt Du ja schon welches hex-File nötig ist.
Vielleicht hat sich was bei den letzten Flashversuchen "verhakt" ?? :o Beim Flash von der CLI aus darf m.E. Fhem nicht laufen (damit das Device frei im Zugriff ist für avrdude).

Ist ein Strohhalm, aber vielleicht den Versuch wert ;) Insbes. wegen

Zitat...pressing reset button twice ... correct serial port will be visible ...

Viele Grüße
rob

Ich schaue morgen nochmal drüber.
Es sollte klappen weil ich den selbigen Radino besitze.

Edit: wenn du den Befehl absetzt, wie blinkt der Radino genau?

Gesendet von iPad mit Tapatalk Pro

Also hier nocheinmal das Log nach dem set sduino1 flash 3.3.1-exp:

<div class='fhemlog'>2019.10.21 08:55:32 3 : SIGNALduino_Set flash 3.3.1-exp try to fetch github assets for tag 3.3.1-exp</div><div class='fhemlog'>2019.10.21 08:55:32 3 : SIGNALduino_Set flash 3.3.1-exp try to fetch release https://api.github.com/repos/RFD-FHEM/SIGNALDuino/releases/tags/3.3.1-exp</div>2019-10-21 08:55:32 SIGNALduino sduino1 flash 3.3.1-exp
2019.10.21 08:55:33 3 : url https://github-production-release-asset-2e65be.s3.amazonaws.com/27504581/9838b280-dd9c-11e9-812f-cd5f9371e3d8?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20191021%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20191021T065532Z&X-Amz-Expires=300&X-Amz-Signature=f7a0d6f0609ee726801bb0d30a30f88b2c5cf605532212eef2d914e93bc34b7b&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3DSIGNALDuino_radinocc11013.3.1-exp.hex&response-content-type=application%2Foctet-stream returned: 80142 bytes Data
2019.10.21 08:55:33 3 : sduino1: Downloaded SIGNALDuino_radinocc11013.3.1-exp.hex firmware from github-production-release-asset-2e65be.s3.amazonaws.com
2019.10.21 08:55:33 5 : sduino1: Header = HTTP/1.1 200 OK x-amz-id-2: kszY9FDJwv9N84/4b283v+bCUJu2hDWDqsH3Uh3ybHlR0reALRfsU65ude9PNKWfX3xqJy7Rlw0= x-amz-request-id: 55528E8EBBDC29F3 Date: Mon, 21 Oct 2019 06:55:34 GMT Last-Modified: Sun, 22 Sep 2019 22:53:46 GMT ETag: "a9c6fda8f62b78581dd5939648432768" Content-Disposition: attachment; filename=SIGNALDuino_radinocc11013.3.1-exp.hex Accept-Ranges: bytes Content-Type: application/octet-stream Content-Length: 80142 Server: AmazonS3 Connection: close
2019.10.21 08:55:33 3 : sduino1: filename FHEM/firmware/SIGNALDuino_radinocc11013.3.1-exp.hex provided, trying to flash
2019.10.21 08:55:33 5 : sduino1: avrdude found = 1
2019.10.21 08:55:33 5 : SIGNALduino sduino1: standard flashCommand is used to flash.
2019.10.21 08:55:33 3 : SIGNALduino sduino1/flash: forcing special reset for radinoCC1101 on /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
2019-10-21 08:55:34 SIGNALduino sduino1 FIRMWARE UPDATE running
2019-10-21 08:55:35 SIGNALduino sduino1 FIRMWARE UPDATE with error
2019.10.21 08:55:35 3 : sduino1: ERROR: avrdude exited with error 256
2019.10.21 08:55:35 3 : Opening sduino1 device /dev/serial/by-id/usb-Unknown_radino_CC1101-if00
2019.10.21 08:55:35 1 : sduino1: Can't open /dev/serial/by-id/usb-Unknown_radino_CC1101-if00: No such file or directory
<div class='fhemlog'>2019.10.21 08:55:46 3 : Setting sduino1 serial parameters to 57600,8,N,1</div><div class='fhemlog'>2019.10.21 08:55:46 1 : sduino1/define: /dev/serial/by-id/usb-Unknown_radino_CC1101-if00</div><div class='fhemlog'>2019.10.21 08:55:46 1 : sduino1/init: /dev/serial/by-id/usb-Unknown_radino_CC1101-if00</div><div class='fhemlog'>2019.10.21 08:55:46 1 : /dev/serial/by-id/usb-Unknown_radino_CC1101-if00 reappeared (sduino1)</div>2019-10-21 08:55:46 SIGNALduino sduino1 CONNECTED
2019.10.21 08:55:46 4 : sduino1/msg READ: Reading values fom eeprom
2019.10.21 08:55:46 5 : sduino1/noMsg Parse: Reading values fom eeprom
2019.10.21 08:55:46 4 : sduino1/msg READ: CCVersion=20
2019.10.21 08:55:46 5 : sduino1/noMsg Parse: CCVersion=20
2019.10.21 08:55:46 4 : sduino1/msg READ: CCPartnum=0
2019.10.21 08:55:46 5 : sduino1/noMsg Parse: CCPartnum=0
2019.10.21 08:55:46 4 : sduino1/msg READ: CC1101 found
2019.10.21 08:55:46 5 : sduino1/noMsg Parse: CC1101 found
2019.10.21 08:55:46 4 : sduino1/msg READ: Starting timerjob
2019.10.21 08:55:46 5 : sduino1/noMsg Parse: Starting timerjob
2019.10.21 08:55:47 4 : sduino1/msg READ: receiver enabled
2019.10.21 08:55:47 5 : sduino1/noMsg Parse: receiver enabled
2019.10.21 08:55:48 3 : sduino1/init: disable receiver (XQ)
2019.10.21 08:55:48 5 : sduino1 SW: XQ
<div class='fhemlog'>2019.10.21 08:55:48 3 : sduino1/init: get version, retry = 0</div><div class='fhemlog'>2019.10.21 08:55:48 5 : sduino1 SW: V</div><div class='fhemlog'>2019.10.21 08:55:48 4 : sduino1/msg READ: V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29</div><div class='fhemlog'>2019.10.21 08:55:48 5 : sduino1/noMsg Parse: V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29</div><div class='fhemlog'>2019.10.21 08:55:48 5 : sduino1/msg READ: regexp=V\s.*SIGNAL(duino|ESP).* cmd=version msg=V 3.3.1-dev SIGNALduino cc1101 (433Mhz )- compiled at Mar 10 2017 23:27:29</div>2019-10-21 08:55:48 SIGNALduino sduino1 opened
2019.10.21 08:55:48 2 : sduino1: initialized. v3.4.1_dev_20.10
2019.10.21 08:55:48 5 : sduino1 SW: XE
2019.10.21 08:55:49 3 : sduino1/init: enable receiver (XE)

und im Anhang wie gewünscht das zugehörige Blinken meines radino:

erst kurz gelb
dann länger grün blinken
dann kurz gelb
dann kurz gelb kurz rot

Hallo,
ich habe nun nochmal alles überflogen und einen Wissenden mit drüber schauen lassen.

Bitte nutze mal die Einbindung in FHEM mit der Schnittstelle (Bsp:    
/dev/ttyACM0@57600) und nicht via Serial.

Dann bitte erneut versuchen. Wenn die Schnittstelle via Serial definiert ist, klappt es noch nicht.

Nun bin ich guter Hoffnung :)

Mfg



Gesendet von iPhone mit Tapatalk Pro

Oder du lädst die Datei noch einmal herunter (https://github.com/elektron-bbs/RFFHEM/tree/dev-r34-radino-reset). Ich habe eben noch etwas ergänzt, so das das Flashen auch mit dieser Definition /dev/serial/by-id/usb-Unknown_radino_CC1101-if00@57600 funktionieren sollte.

Den Flashvorgang dann normal über die Weboberfläche ausführen.

Hallo elektron-bbs, hallo HomeAuto_User,

Eure Antworten kamen für mich leider zu spät. Zu diesem Zeitpunkt hatte ich meine Firmware mit meinem Versuchen manuell zu flashen bereits zerstört.  ;D

Aber das tote Stück Plastik hat meinen Ergeiz geweckt, sodass ich dann doch erfolgreich manuell geflasht habe. Die Anleitung bei in-circuit (http://wiki.in-circuit.de/index.php5?title=radino/radino32_software#Upload_binary_on_radino) ist unvollständig und gefährlich, da sie bei Verwendung der Arduino-IDE zur Zerstörung der Firmware führt. Soweit ich das verstanden habe, ist die Arduino-IDE zum flashen sowieso gänzlich ungeeignet und sollte daher in einer Flashanleitung wohl nichts zu suchen haben. In der eigentlichen Anleitung zu flashen auf dieser Seite ("How to upload a binary file ") fehlt dann leider der tatsächlich funktionierende Hinweis, wie man den radino in den Bootloader-Modus versetzt. Denn das erwähnte zweimal RST-Drücken klappt nicht. Auch nicht RST zusammen mit BSL und dann einzeln nacheinander wieder loslassen. Ich habe dieses Button-Drücken 2 Stunden lang versucht, in allen möglichen Abfolgen (mit Strom anfangen, ohne Strom anfangen, schnell, langsam ...), ohne Erfolg.

Einzig und allein (und zwar ohne jedes Drücken irgendwelcher Buttons) das Setzen auf 1200 baud setzt den radino reproduzierbar in den Bootloader-Modus. Also hier mein Rezept, welches für meinen radino und meinen rasperry pi funktioniert hat. Wichtig vor Beginn der Aktion ist, herauszubekommen, wie das radino Device unter /dev angebunden ist. Dazu habe ich unter /dev/serial/by-id/ bzw. unter /dev/serial/by-path/ mittels ls -al nachgesehen unter welchem tty**** mein radino eingebunden war (bei mir ttyACM0). Und natürlich sollte sich das hex-File (SIGNALDuino_radinocc11013.3.1-exp.hex) schon im Verzeichnis (bei mir) /opt/fhem/FHEM/firmware/ befinden. Und zu guter Letzt habe ich als Vorbereitung FHEM gestoppt, um das Device frei zu geben (sudo service fhem stop). Nach dem Flashen habe ich FHEM per (sudo service fhem start) wieder gestartet.

Schritt 1 radino in Bootloader versetzen (grüne LED faded danach an und aus)
stty -F /dev/ttyACM0 1200

Schritt 2 radino flashen (mit 3.3.1-exp) (wichtig!!! nach Schritt 1 nicht zu lange warten wichtig!!!)
avrdude -v -p atmega32u4 -c avr109 -P /dev/ttyACM0 -b57600 -D -U flash:w:/opt/fhem/FHEM/firmware/SIGNALDuino_radinocc11013.3.1-exp.hex:i 2

Zur Belohnung zeigt mein sduino dann unter "Readings"

version V 3.3.1-experimental SIGNALduino cc1101 (433 Mhz ) - compiled at Sep 22 2019 22:53:33

Meine Antwort zu Euren Beiträgen folgt im nächsten Post.

Hallo elektron-bbs, hallo HomeAuto_User,

nach der Installation des neuen Moduls und Neustarten von FHEM erhalte ich folgende Fehlermeldung:

Messages collected while initializing FHEM:
configfile: Cannot load module SIGNALduino
Please define sduino1 5cd594e9-f33f-222b-2250-fb21d0759ae97eff first
./log/fhem.save: Please define sduino1 first
Please define sduino1 first
Please define sduino1 first
Please define sduino1 first

Autosave deactivated

So wie es aussieht, scheint es keine gute Idee zu sein das Device per /dev/serial/by-id oder per /dev/serial/by-path einzubinden. Bei meinen manuellen Versuchen habe ich letztendlich auch /dev/tty**** verwendet.

@HomeAuto_User: Ja, Dein Tipp scheint hier die Lösung zu sein  :)

@elektron-bbs: Wenn es anderen weiter hilft und es Deine Zeit zuläßt, können wir gerne trotzdem weiter versuchen das zu lösen...

Danke für Eure Bemühungen und liebe Grüße

Weitere Neuigkeiten zu meinem eigentlichen Problem mit den Obisteckern folgen im nächsten Post

Nach dem Flashen meines sduino auf 3.3.1-exp habe ich meinen Obi-Zwischenstecker wieder mehrfach ein- und ausgeschaltet.

Ich habe jetzt 6 (!) Devices per autocreate angelegt bekommen. 4x IT_1527x***** und 2x IT_FF********
Keines dieser Devices funktioniert  :(

Hier ein Beispiel-Log für ON (Einschalten per Fernbedienung)
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1/RAW rmsg: Ms;���;���;�Ą;���;�͂;d�4R4TTTR4TR224TTR24R224R2;C2;S1;R43;O;m2;E;#;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1/msg READredu: MS;P1=-2348;P2=274;P3=-1092;P4=917;P5=-589;D=21234523454545452345452323234545452323452323234523;CP=2;SP=1;R=67;O;m2;E;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: Starting demodulation at Position 2</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching bits: 0 1 0 1 1 1 1 0 1 1 0 0 0 1 1 1 0 0 1 0 0 0 1 0</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MS Protocol id 55 dmsg i5EC722 length 24  RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: i5EC722, test ungleich: disabled</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: i5EC722, -40.5 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatch i5EC722</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 IT: message "i5EC722" (7)</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 IT: msgcode "" (0) bin = 010111101100011100100010</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 IT: EV1527 housecode = 1527x5ec72  onoffcode = 0010</div><div class='fhemlog'>2019.10.22 10:38:01 3 : sduino1 IT: IT_1527x5ec72 off->on</div>2019-10-22 10:38:01 IT IT_1527x5ec72 on
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1/RAW rmsg: Mu;���;���;���;�˄;���;�ς;��;�ț;D!#E#EEEE#EE###EEE##E###E#!#E#EEEE#EE###EEE##E###E#gEEEEEEEEEEEEgEEEEEEEEEEEEgEEEEEEEEEEEEg;C4;R43;O;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1/msg READredu: MU;P0=425;P1=-2348;P2=274;P3=-1099;P4=912;P5=-591;P6=2925;P7=-7112;D=21234523454545452345452323234545452323452323234523212345234545454523454523232345454523234523232345236703450345454545034545030303454545030345030303450367034503454545450345450303034545450303450303034503670345034545454503454503030345454503034503030345036703;CP=4;R=67;O;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:)((?:03|45){43,})) did not match</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 13.1 -> FLAMINGO FA22RF / FA21RF / LM-101LD not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 16 -> Dooya not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 234523454545452345452323234545452323452323234523 starts at position 2 and ends at 50</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 1. skip demodulation (length 24 is to long) at Pos 2 regex ((?:)((?:45|23){19,}))</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 234523454545452345452323234545452323452323234523 starts at position 52 and ends at 100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 2. skip demodulation (length 24 is to long) at Pos 52 regex ((?:)((?:45|23){19,}))</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 21 -> Einhell Garagedoor not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 22 -> HAMULiGHT not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 24 -> visivon remote not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 26 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:21)((?:03|45){24,})) did not match</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 0 and ends at 50</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: Starting demodulation (StartStr: 67 first found at 100 regex: (?:67)((?:03|45){24,}) Pos 100) length_min_max (24..24) length=24</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: u27#A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DD length 24 dispatch(1/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u27#A138DD, test ungleich: disabled</div>2019-10-22 10:38:01 SIGNALduino sduino1 DMSG u27#A138DD
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u27#A138DD, -40.5 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatch u27#A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown incomming msg: u27#A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown rawData: A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown converted to bits: 101000010011100011011101</div><div class='fhemlog'>2019.10.22 10:38:01 5 : SIGNALduino_unknown: sduino1 Protocol 127 found in AttrVal development!</div>2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 bitMsg: 101000010011100011011101
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 bitMsg_invert: 010111101100011100100010
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 bitCount: 24
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 hexMsg: A138DD
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 hexMsg_invert: 5EC722
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 hexCount_or_nibble: 6
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_27 lastInputDev: sduino1
<div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 50 and ends at 100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 2. try demodulation at Pos 50</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: u27#A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DD length 24 dispatch(2/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u27#A138DD, test gleich</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 Dispatch: u27#A138DD, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 100 and ends at 150</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 3. try demodulation at Pos 100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: u27#A138DD</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A138DD length 24 dispatch(3/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u27#A138DD, test gleich</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 Dispatch: u27#A138DD, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 28 -> IC Ledspot not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 30 -> diverse not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 31 -> Pollin ISOTRONIC not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 32 -> FreeTec PE-6946 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:4)((?:54|34){20,})) did not match</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 36 -> remote not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: for MU Protocol id 39, applying filterfunc SIGNALduino_compPattern</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 39 -> X10 Protocol not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 40 -> Romotec  not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 44 -> BresserTemeo not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 45 -> Revolt not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 46 -> SKXxxx, GF0x0x not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 0 and ends at 50</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: Starting demodulation (StartStr: 67 first found at 100 regex: (?:67)((?:45|03){22,}) Pos 100) length_min_max (22..28) length=24</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: U49#5EC722</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC722 length 24 dispatch(1/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: U49#5EC722, test ungleich: disabled</div>2019-10-22 10:38:01 SIGNALduino sduino1 DMSG U49#5EC722
<div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 50 and ends at 100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 2. try demodulation at Pos 50</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: U49#5EC722</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC722 length 24 dispatch(2/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: U49#5EC722, test gleich</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 Dispatch: U49#5EC722, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 034503454545450345450303034545450303450303034503 starts at position 100 and ends at 150</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 3. try demodulation at Pos 100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: U49#5EC722</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5EC722 length 24 dispatch(3/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: U49#5EC722, test gleich</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1 Dispatch: U49#5EC722, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 56 -> Celexon not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 59 -> AK-HD-4 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 62 -> Clarus_Switch not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: for MU Protocol id 63, applying filterfunc SIGNALduino_filterMC</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 111111111111111111111111 starts at position 0 and ends at 24</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: Starting demodulation ( regex: (?:)((?:1){24,}) Pos 0) length_min_max (24..) length=24</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: u63#FFFFFF</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 63 dmsg u63#FFFFFF length 24 dispatch(1/4) RSSI = -40.5</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u63#FFFFFF, test ungleich: disabled</div>2019-10-22 10:38:01 SIGNALduino sduino1 DMSG u63#FFFFFF
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u63#FFFFFF, -40.5 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatch u63#FFFFFF</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown incomming msg: u63#FFFFFF</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown rawData: FFFFFF</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown Protocol: 63</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown converted to bits: 111111111111111111111111</div><div class='fhemlog'>2019.10.22 10:38:01 5 : SIGNALduino_unknown: sduino1 Protocol 163 found in AttrVal development!</div>2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 bitMsg: 111111111111111111111111
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 bitMsg_invert: 000000000000000000000000
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 bitCount: 24
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 hexMsg: FFFFFF
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 hexMsg_invert: 000000
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 hexCount_or_nibble: 6
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_63 lastInputDev: sduino1
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 66 -> WS7035 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 69 -> Hoermann not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 72 -> Siro shutter not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 76 -> LED XM21 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 79 -> wireless doorbell not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 81 -> SA-434-1 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 82 -> Fernotron matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:)((?:03|45|21){100,})) did not match</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 83 -> RH787T not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 84 -> IAN 283582 / TV-4848 not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 86 -> BOSCH | CAME | Novy | Neff | Refsta Topdraft not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 91 -> Atlantic security not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 92 -> KRINNER Lumix not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 94 -> Atech not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1/RAW rmsg: Mu;���;�Ղ;���;�˄;d
#



#

###


##
###
;C2;RD6;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1/msg READredu: MU;P0=908;P1=-597;P2=417;P3=-1099;D=012301010101230101232323010101232301232323012;CP=2;R=214;</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:)((?:23|01){43,})) did not match</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 13.1 -> FLAMINGO FA22RF / FA21RF / LM-101LD not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 16 -> Dooya not found, aborting</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:38:01 5 : part is 01230101010123010123232301010123230123232301 starts at position 0 and ends at 44</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: Starting demodulation ( regex: (?:)((?:01|23){19,}) Pos 0) length_min_max (19..23) length=22</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatching hex: u19#BD8E44</div><div class='fhemlog'>2019.10.22 10:38:01 4 : sduino1: Decoded matched MU Protocol id 19 dmsg u19#BD8E44 length 24 dispatch(1/4) RSSI = -95</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u19#BD8E44, test ungleich: disabled</div>2019-10-22 10:38:01 SIGNALduino sduino1 DMSG u19#BD8E44
<div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1 Dispatch: u19#BD8E44, -95 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:38:01 5 : sduino1: dispatch u19#BD8E44</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown incomming msg: u19#BD8E44</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown rawData: BD8E44</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.22 10:38:01 4 : SIGNALduino_unknown converted to bits: 101111011000111001000100</div><div class='fhemlog'>2019.10.22 10:38:01 5 : SIGNALduino_unknown: sduino1 Protocol 119 found in AttrVal development!</div>2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 bitMsg: 101111011000111001000100
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 bitMsg_invert: 010000100111000110111011
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 bitCount: 24
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 hexMsg: BD8E44
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 hexMsg_invert: 4271BB
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 hexCount_or_nibble: 6
2019-10-22 10:38:01 SIGNALduino_un SIGNALduino_unknown_19 lastInputDev: sduino1
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 21 -> Einhell Garagedoor not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 22 -> HAMULiGHT not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 24 -> visivon remote not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 26 -> remote not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 27 -> remote not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 28 -> IC Ledspot not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 29 -> HT12e not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 30 -> diverse not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 31 -> Pollin ISOTRONIC not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 32 -> FreeTec PE-6946 not found, aborting
2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate
2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:0)((?:10|30){20,})) did not match
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 36 -> remote not found, aborting
2019.10.22 10:38:01 5 : sduino1: for MU Protocol id 39, applying filterfunc SIGNALduino_compPattern
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 39 -> X10 Protocol not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 40 -> Romotec not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 44 -> BresserTemeo not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 44.1 -> BresserTemeo not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 45 -> Revolt not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 46 -> SKXxxx, GF0x0x not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 49 -> QUIGG_GT-9000 not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 56 -> Celexon not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 59 -> AK-HD-4 not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 62 -> Clarus_Switch not found, aborting
2019.10.22 10:38:01 5 : sduino1: for MU Protocol id 63, applying filterfunc SIGNALduino_filterMC
2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:)((?:0){24,})) did not match
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 66 -> WS7035 not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 69 -> Hoermann not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 72 -> Siro shutter not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 76 -> LED XM21 not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 79 -> wireless doorbell not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 81 -> SA-434-1 not found, aborting
2019.10.22 10:38:01 4 : sduino1: Fingerprint for MU Protocol id 82 -> Fernotron matches, trying to demodulate
2019.10.22 10:38:01 5 : sduino1: 0. try, regex ((?:)((?:23|01){100,})) did not match
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 83 -> RH787T not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 84 -> IAN 283582 / TV-4848 not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 86 -> BOSCH | CAME | Novy | Neff | Refsta Topdraft not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 91 -> Atlantic security not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 92 -> KRINNER Lumix not found, aborting
2019.10.22 10:38:01 5 : sduino1: start pattern for MU Protocol id 94 -> Atech not found, aborting

Hier ein Beispiel-Log für OFF (Ausschalten per Fernbedienung)
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1/RAW rmsg: Ms;�Ճ;���;���;��;�ҁ;D!#############;C2;S1;R3B;m2;;#;</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1/msg READredu: MS;P0=981;P1=-2336;P2=299;P3=-1132;P4=-466;D=21230423040423042304232304042323230423040423230423;CP=2;SP=1;R=59;m2;</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Matched MS Protocol id 55 -> QUIGG_GT-1000</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: Starting demodulation at Position 2</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching bits: 0 1 0 1 1 0 1 0 1 0 0 1 1 0 0 0 1 0 1 1 0 0 1 0</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MS Protocol id 55 dmsg i5A98B2 length 24  RSSI = -44.5</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: i5A98B2, test ungleich: disabled</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: i5A98B2, -44.5 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatch i5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1 IT: message "i5A98B2" (7)</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1 IT: msgcode "" (0) bin = 010110101001100010110010</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 IT: EV1527 housecode = 1527x5a98b  onoffcode = 0010</div><div class='fhemlog'>2019.10.22 10:40:28 3 : sduino1 IT: IT_1527x5a98b on->on</div>2019-10-22 10:40:28 IT IT_1527x5a98b on
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1/RAW rmsg: Mu;�҂;���;�҄;���;��;���;D
#
#
#
!#
!!#
#
!#
$Q#
#
#
#
!#
!!#
#
!#
$Q#
#
#
#
!#
!!#
#
!#
$Q#
#
#
#
!#
!!#
#
!#
;C1;R3A;</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1/msg READredu: MU;P0=-594;P1=402;P2=-1106;P3=909;P4=2918;P5=-7136;D=01230301230123012123030121212301230301212301245123012303012301230121230301212123012303012123012451230123030123012301212303012121230123030121230124512301230301230123012123030121212301230301212301;CP=1;R=58;</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 0. try, regex ((?:)((?:12|30){43,})) did not match</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 13.1 -> FLAMINGO FA22RF / FA21RF / LM-101LD not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 16 -> Dooya not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 19 -> minify matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:40:28 5 : part is 12303012301230121230301212123012303012123012 starts at position 1 and ends at 45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: Starting demodulation ( regex: (?:)((?:30|12){19,}) Pos 0) length_min_max (19..23) length=22</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching hex: u19#6A62C8</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 19 dmsg u19#6A62C8 length 24 dispatch(1/4) RSSI = -45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u19#6A62C8, test ungleich: disabled</div>2019-10-22 10:40:28 SIGNALduino sduino1 DMSG u19#6A62C8
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u19#6A62C8, -45 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatch u19#6A62C8</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown incomming msg: u19#6A62C8</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown rawData: 6A62C8</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown converted to bits: 011010100110001011001000</div><div class='fhemlog'>2019.10.22 10:40:28 5 : SIGNALduino_unknown: sduino1 Protocol 119 found in AttrVal development!</div>2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitMsg: 011010100110001011001000
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitMsg_invert: 100101011001110100110111
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitCount: 24
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexMsg: 6A62C8
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexMsg_invert: 959D37
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexCount_or_nibble: 6
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 lastInputDev: sduino1
<div class='fhemlog'>2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 47 and ends at 95</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 2. skip demodulation (length 24 is to long) at Pos 47 regex ((?:)((?:30|12){19,}))</div><div class='fhemlog'>2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 97 and ends at 145</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 3. skip demodulation (length 24 is to long) at Pos 97 regex ((?:)((?:30|12){19,}))</div><div class='fhemlog'>2019.10.22 10:40:28 5 : part is 1230123030123012301212303012121230123030121230 starts at position 147 and ends at 193</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 4. try demodulation at Pos 147</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching hex: u19#5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 19 dmsg u19#5A98B2 length 24 dispatch(2/4) RSSI = -45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u19#5A98B2, test ungleich: disabled</div>2019-10-22 10:40:28 SIGNALduino sduino1 DMSG u19#5A98B2
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u19#5A98B2, -45 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatch u19#5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown incomming msg: u19#5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown rawData: 5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown Protocol: 19</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown converted to bits: 010110101001100010110010</div><div class='fhemlog'>2019.10.22 10:40:28 5 : SIGNALduino_unknown: sduino1 Protocol 119 found in AttrVal development!</div>2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitMsg: 010110101001100010110010
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitMsg_invert: 101001010110011101001101
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 bitCount: 24
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexMsg: 5A98B2
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexMsg_invert: A5674D
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 hexCount_or_nibble: 6
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_19 lastInputDev: sduino1
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 21 -> Einhell Garagedoor not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 22 -> HAMULiGHT not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 24 -> visivon remote not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 26 -> remote not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 27 -> remote matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 0 and ends at 50</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: Starting demodulation (StartStr: 45 first found at 45 regex: (?:45)((?:12|30){24,}) Pos 45) length_min_max (24..24) length=24</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching hex: u27#A5674D</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A5674D length 24 dispatch(1/4) RSSI = -45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u27#A5674D, test ungleich: disabled</div>2019-10-22 10:40:28 SIGNALduino sduino1 DMSG u27#A5674D
<div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u27#A5674D, -45 dB, dispatch</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatch u27#A5674D</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown incomming msg: u27#A5674D</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown rawData: A5674D</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown Protocol: 27</div><div class='fhemlog'>2019.10.22 10:40:28 4 : SIGNALduino_unknown converted to bits: 101001010110011101001101</div><div class='fhemlog'>2019.10.22 10:40:28 5 : SIGNALduino_unknown: sduino1 Protocol 127 found in AttrVal development!</div>2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 bitMsg: 101001010110011101001101
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 bitMsg_invert: 010110101001100010110010
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 bitCount: 24
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 hexMsg: A5674D
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 hexMsg_invert: 5A98B2
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 hexCount_or_nibble: 6
2019-10-22 10:40:28 SIGNALduino_un SIGNALduino_unknown_27 lastInputDev: sduino1
<div class='fhemlog'>2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 50 and ends at 100</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 2. try demodulation at Pos 50</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching hex: u27#A5674D</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 27 dmsg u27#A5674D length 24 dispatch(2/4) RSSI = -45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: u27#A5674D, test gleich</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1 Dispatch: u27#A5674D, Dropped due to short time or equal msg</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 28 -> IC Ledspot not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 30 -> diverse not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 31 -> Pollin ISOTRONIC not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 32 -> FreeTec PE-6946 not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 34 -> QUIGG | LIBRA matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: 0. try, regex ((?:3)((?:03|23){20,})) did not match</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 36 -> remote not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 38 -> NC-3911 not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: for MU Protocol id 39, applying filterfunc SIGNALduino_compPattern</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 39 -> X10 Protocol not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 40 -> Romotec  not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 42 -> wireless doorbell not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 44 -> BresserTemeo not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 45 -> Revolt not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 46 -> SKXxxx, GF0x0x not found, aborting</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 49 -> QUIGG_GT-9000 matches, trying to demodulate</div><div class='fhemlog'>2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 0 and ends at 50</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: Starting demodulation (StartStr: 45 first found at 45 regex: (?:45)((?:30|12){22,}) Pos 45) length_min_max (22..28) length=24</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1: dispatching hex: U49#5A98B2</div><div class='fhemlog'>2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5A98B2 length 24 dispatch(1/4) RSSI = -45</div><div class='fhemlog'>2019.10.22 10:40:28 5 : sduino1 Dispatch: U49#5A98B2, test ungleich: disabled</div>2019-10-22 10:40:28 SIGNALduino sduino1 DMSG U49#5A98B2
2019.10.22 10:40:28 5 : part is 123012303012301230121230301212123012303012123012 starts at position 50 and ends at 100
2019.10.22 10:40:28 5 : sduino1: 2. try demodulation at Pos 50
2019.10.22 10:40:28 5 : sduino1: dispatching hex: U49#5A98B2
2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5A98B2 length 24 dispatch(2/4) RSSI = -45
2019.10.22 10:40:28 5 : sduino1 Dispatch: U49#5A98B2, test gleich
2019.10.22 10:40:28 4 : sduino1 Dispatch: U49#5A98B2, Dropped due to short time or equal msg
2019.10.22 10:40:28 5 : part is 1230123030123012301212303012121230123030121230 starts at position 100 and ends at 148
2019.10.22 10:40:28 5 : sduino1: 3. try demodulation at Pos 100
2019.10.22 10:40:28 5 : sduino1: dispatching hex: U49#5A98B2
2019.10.22 10:40:28 4 : sduino1: Decoded matched MU Protocol id 49 dmsg U49#5A98B2 length 24 dispatch(3/4) RSSI = -45
2019.10.22 10:40:28 5 : sduino1 Dispatch: U49#5A98B2, test gleich
2019.10.22 10:40:28 4 : sduino1 Dispatch: U49#5A98B2, Dropped due to short time or equal msg
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 56 -> Celexon not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 59 -> AK-HD-4 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 62 -> Clarus_Switch not found, aborting
2019.10.22 10:40:28 5 : sduino1: for MU Protocol id 63, applying filterfunc SIGNALduino_filterMC
2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 63 -> Warema matches, trying to demodulate
2019.10.22 10:40:28 5 : sduino1: 0. try, regex ((?:)((?:1){24,})) did not match
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 66 -> WS7035 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 69 -> Hoermann not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 72 -> Siro shutter not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 76 -> LED XM21 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 79 -> wireless doorbell not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 81 -> SA-434-1 not found, aborting
2019.10.22 10:40:28 4 : sduino1: Fingerprint for MU Protocol id 82 -> Fernotron matches, trying to demodulate
2019.10.22 10:40:28 5 : sduino1: 0. try, regex ((?:)((?:12|30){100,})) did not match
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 83 -> RH787T not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 84 -> IAN 283582 / TV-4848 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 85 -> TFA 30.3222.02 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 86 -> BOSCH | CAME | Novy | Neff | Refsta Topdraft not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 89 -> TFA 30.3221.02 not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 91 -> Atlantic security not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 92 -> KRINNER Lumix not found, aborting
2019.10.22 10:40:28 5 : sduino1: start pattern for MU Protocol id 94 -> Atech not found, aborting

Hi,
mit der Firmwareanpassung sind wir ja schon ein Stück gekommen.

Die Dosen werden wir auch noch ,,knacken" :)

Kannst du bitte das gleich mal strukturiert loggen.

- 2x Taste 1 off hintereinander
- 2x Taste 1 on hintereinander
...

Bitte das Logfile markieren mit Startzeitpunkt und wo du die Tasten gewechselt hast.

Frage, kannst du die Fernbedienung aufschrauben? Uns würden mal Bilder von der Platine interessieren.

Das Log + Bilder kannst du als Files jeweils hinterlegen hier oder in Github https://github.com/RFD-FHEM/RFFHEM/issues/667

Mfg


Gesendet von iPhone mit Tapatalk Pro

Hallo HomeAuto_User,

anbei das gewünschte Log und die Bilder vom Board der Fernbedienung. Ich habe auch das Board vom Stecker beigefügt.

Ist alles auch bei GitHub.

Danke Euch für die Unterstützung

Ich wurde gebeten, die weitere Entwicklung auf GitHub (https://github.com/RFD-FHEM/RFFHEM/issues/667) zu kommentieren.

Daher wird hier bis auf Weiteres erst einmal Ruhe herrschen, bis es ein Ergebnis zu kommentieren gibt.

Ich denke, dass sind gute Neuigkeiten, weil sich die Spezialisten dafür interessieren, die Dinger mit FHEM ans Laufen zu bringen.

Für alle, die sich hierher 'verlaufen' haben:

Folgender Beitrag behandelt die gleichen Zwischenstecker und beinhaltet auch schon eine manuelle Lösung:

https://forum.fhem.de/index.php/topic,94781.0.html