Hallo Wzut,
beim anlegen eines neuen Kontaktes kommt dieser Hinweis. Kontakt ist danach auch nicht sichtbar.
2020.03.08 11:47:26.611 3: CULMAX0, source device 0a97c6 has no name !
2020.03.08 11:47:26.612 5: CULMAX0, IODev CUL_1, len 23, msgcnt 02, msgflag 04, msgType PairPing, src 0a97c6, dst 123456, group 0, payload 14040F4B455130343734373433, rssi -62
2020.03.08 11:47:26.612 4: CULMAX0, PairPing (dst 123456, pairmode 1), firmware 20, type ShutterContact, testresult 15, serial KEQ0474743
2020.03.08 11:47:26.612 3: CULMAX0, Re-Pairing device MAX_0a97c6 of type ShutterContact with serial KEQ0474743
2020.03.08 11:47:26.613 5: CULMAX0: dispatch MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 11:47:26.613 5: MAX_Parse, MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 11:47:26.613 1: MAX_Parse, ohne Namen msg: MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 11:47:26.614 1: ERROR: empty name in readingsBeginUpdate
2020.03.08 11:47:26.614 1: stacktrace:
2020.03.08 11:47:26.614 1: main::readingsBeginUpdate called by ./FHEM/14_CUL_MAX.pm (816)
2020.03.08 11:47:26.614 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.615 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.615 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.615 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.615 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.616 1: readingsUpdate(,firmware,1.4) missed to call readingsBeginUpdate first.
2020.03.08 11:47:26.616 1: stacktrace:
2020.03.08 11:47:26.616 1: main::readingsBulkUpdate called by ./FHEM/14_CUL_MAX.pm (817)
2020.03.08 11:47:26.616 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.617 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.617 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.617 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.617 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.618 1: readingsUpdate(,testresult,15) missed to call readingsBeginUpdate first.
2020.03.08 11:47:26.618 1: stacktrace:
2020.03.08 11:47:26.618 1: main::readingsBulkUpdate called by ./FHEM/14_CUL_MAX.pm (818)
2020.03.08 11:47:26.618 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.619 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.619 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.619 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.619 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.620 1: readingsUpdate(,PairedTo,123456) missed to call readingsBeginUpdate first.
2020.03.08 11:47:26.620 1: stacktrace:
2020.03.08 11:47:26.620 1: main::readingsBulkUpdate called by ./FHEM/14_CUL_MAX.pm (819)
2020.03.08 11:47:26.620 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.620 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.621 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.621 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.621 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.621 1: readingsUpdate(,SerialNr,KEQ0474743) missed to call readingsBeginUpdate first.
2020.03.08 11:47:26.622 1: stacktrace:
2020.03.08 11:47:26.622 1: main::readingsBulkUpdate called by ./FHEM/14_CUL_MAX.pm (820)
2020.03.08 11:47:26.622 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.622 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.622 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.622 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.623 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.623 1: ERROR: empty name in readingsBeginUpdate
2020.03.08 11:47:26.623 1: stacktrace:
2020.03.08 11:47:26.624 1: main::readingsBeginUpdate called by fhem.pl (4935)
2020.03.08 11:47:26.624 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 11:47:26.624 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 11:47:26.624 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.624 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.625 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.625 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.625 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.625 1: readingsUpdate(,msgcnt,1) missed to call readingsBeginUpdate first.
2020.03.08 11:47:26.625 1: stacktrace:
2020.03.08 11:47:26.626 1: main::readingsBulkUpdate called by fhem.pl (4936)
2020.03.08 11:47:26.626 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 11:47:26.626 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 11:47:26.626 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 11:47:26.626 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 11:47:26.627 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 11:47:26.627 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 11:47:26.627 1: main::CallFn called by fhem.pl (756)
2020.03.08 11:47:26.627 4: CULMAX0, send -> cmd:PairPong, msgcnt:01, flags:00, Cmd2id:01, src:MAX_123456 , dst:MAX_0a97c6 , gid:00 , payload:00 , cul:none
2020.03.08 11:47:26.627 5: CULMAX0, send packet: 0b0100011234560a97c60000
2020.03.08 11:47:29.242 5: CULMAX0, Send Queue 13 packets in queue
2020.03.08 11:47:29.249 5: CULMAX0, Send Queue CUL_1 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 3234, CUL_1 CMD_LAST_H: 5
2020.03.08 11:47:29.251 4: CULMAX0, Send Queue packet send : Zs0b0100011234560a97c60000 to MAX_0a97c6 with CUL_1
2020.03.08 11:47:29.743 5: CULMAX0, Send Queue 13 packets in queue
2020.03.08 11:47:30.244 5: CULMAX0, Send Queue 13 packets in queue
2020.03.08 11:47:30.328 3: CULMAX0, source device 0a97c6 has no name !
2020.03.08 11:47:30.328 5: CULMAX0, IODev CUL_1, len 12, msgcnt 01, msgflag 02, msgType Ack, src 0a97c6, dst 123456, group 0, payload 0112, rssi -62.5
2020.03.08 11:47:30.329 5: CULMAX0, ACK from MAX_0a97c6 for cmd PairPong , packet will be removed soon
2020.03.08 11:47:30.329 5: CULMAX0, delete packet Index 12 in SendQueue direct !
2020.03.08 11:47:30.330 5: CULMAX0: dispatch MAX,1,Ack,0a97c6,0112
2020.03.08 11:47:30.330 5: MAX_Parse, MAX,1,Ack,0a97c6,0112
2020.03.08 11:47:30.330 1: MAX_Parse, ohne Namen msg: MAX,1,Ack,0a97c6,0112
Ich habe die beiden Dateien aus diesen Eintrag (https://forum.fhem.de/index.php/topic,106258.0.html) genommen. Muss die 00_CUL.pm auch noch angepaßt werden.
pejonp
aus irgend einem Grund hat bei dir autocrate nicht gegriffen , leg dir den FK von Hand an
defmod MAX_0a97c6 MAX ShutterContact 0a97c600_CUL muss nur erneuert werden wenn man mehr als einen CUL benutzt
Edit : dein Log zeigt leider micht den Anfang :
ZitatSend Queue 13 packets in queue
D.h. da ist viel früher schon was schief gelaufen , die Frage ist halt was.
Hi Wzut,
hier mal das komplette Log vom Start bis zum anlernen.
Der CUL ist ein CUBE mit 3x CC1101.
CUL_1
Internals:
CMDS BbCFiAZNEkGMKLUYRTVWXefhltxz*
CUL_1_MSGCNT 165
CUL_1_TIME 2020-03-08 15:07:03
Clients :CUL_MAX:HMS:CUL_IR:STACKABLE_CC:TSSTACKED:STACKABLE:
DEF 192.168.4.107:2323 3034
DeviceName 192.168.4.107:2323
FD 30
FHTID 3034
FUUID 5c693f0b-f33f-6fdc-006b-451ee5f7aebe0104
NAME CUL_1
NR 180
NR_CMD_LAST_H 8
PARTIAL
RAWMSG **zE771FF5F20450115152000FA31140000002001FF8C
RSSI -58.5
STACKED CUL_1_SCC
STATE Initialized
TYPE CUL
VERSION V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
initString X21
Zr
Za123456
Zw111111
MatchList:
1:CUL_MAX ^Z........................
8:HMS ^810e04....(1|5|9).a001
D:CUL_IR ^I............
H:STACKABLE_CC ^\*
M:TSSTACKED ^\*
N:STACKABLE ^\*
READINGS:
2020-03-08 15:06:27 ccconf freq:868.300MHz bWidth:101KHz rAmpl:33dB sens:8dB
2020-03-08 15:06:45 cmds B b C F i A Z N E k G M K L U Y R T V W X e f h l t x z *
2020-03-08 15:06:49 credit10ms 3600
2020-03-08 15:06:51 fhtbuf AE
2020-03-08 15:07:03 state Initialized
2020-03-08 15:06:56 uptime 17 21:50:56
2020-03-08 15:06:32 version V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
XMIT_TIME:
1583675489.7894
1583675496.41866
1583675519.80809
1583675549.74902
1583675556.25953
1583675562.77654
1583675569.28691
1583675574.22402
Attributes:
model SCC
rfmode MAX
room TRX
verbose 2
CUL_MAX
Internals:
CULMAX0_MSGCNT 3
CULMAX0_TIME 2020-03-08 14:53:03
CUL_1_MSGCNT 12
CUL_1_RAWMSG Z0BA306300737141234560010
CUL_1_RSSI -70.5
CUL_1_TIME 2020-03-08 15:02:55
DEF 123456
FUUID 5c693f0e-f33f-6fdc-dc16-654df097c8004ac2
FVERSION 14_CUL_MAX.pm:?/2020-03-07 UNSTABLE
IODev CUL_1
LASTInputDev CUL_1
MSGCNT 15
NAME CULMAX0
NR 230
STATE Defined
TYPE CUL_MAX
addr 123456
cnt 0
pairmode 0
retryCount 0
sq 0
{"method":"getPowerStatus","params":[],"id":1,"version":"1.0"}_VERSION 154
READINGS:
2020-03-07 07:36:48 packetsLost 22
sendQueue:
Attributes:
IODev CUL_1
fakeSCaddr 222222
fakeWTaddr 111111
room CUL_MAX
verbose 5
pejonp
ok, wie vermutet autocreate hat den nicht angelegt :
2020.03.08 14:52:29.731 4: autocreate: received 1 event(s) for 'MAX ShutterContact 0a97c6' during the last 60 seconds
2020.03.08 14:52:29.731 4: autocreate: ignoring event for 'MAX ShutterContact 0a97c6': at least 2 needed
muss ich mal wieder bei mir Geräte löschen und schauen ob sie fehlerfrei angelgt werden.
dann fällt mir noch auf :
2020.03.08 14:51:49.042 4: CULMAX0, packet from ourselves or a other CUL [123456 / 0], - ignoring !
da läuft noch ein andere CUL mit unvollständigen Parametern im rfmode MAX , das solltest du ändern und wenn dein CUL_1 das bevorzugte Device für CULMAX0 ist gib dem CUL_1 gleich das attribut maxid 123456 mit (ist jetzt noch nicht zwingend aber dann bist schon gerüstet für die Zukunft)
Wenn die drei CC1101 in einem Cube verbaut sind gehe ich mal nicht davon aus das du da keine IOgrp machen möchtest.
Hast denn jetzt mal deinen FK von Hand angelegt ?
Hallo Wzut,
ich habe mal versucht das Device von Hand anzulegen, geht leider nicht.
2020.03.08 16:44:08.267 4: CUL_Parse: CUL_1 Z170904000A97C61234560014040F4B4551303437343734331A -61
2020.03.08 16:44:08.268 5: CUL_1: dispatch Z170904000A97C61234560014040F4B455130343734373433
2020.03.08 16:44:08.270 5: CULMAX0, IODev CUL_1, len 23, msgcnt 09, msgflag 04, msgType PairPing, src 0a97c6, dst 123456, group 0, payload 14040F4B455130343734373433, rssi -61
2020.03.08 16:44:08.270 4: CULMAX0, PairPing (dst 123456, pairmode 0), firmware 20, type ShutterContact, testresult 15, serial KEQ0474743
2020.03.08 16:44:08.271 3: CULMAX0, Re-Pairing device MAX_0a97c6 of type ShutterContact with serial KEQ0474743
2020.03.08 16:44:08.271 5: CULMAX0: dispatch MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 16:44:08.271 5: MAX_Parse, MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 16:44:08.272 3: MAX_PARSE, got message define for undefined device 0a97c6 type ShutterContact , autocreate is enabled
2020.03.08 16:44:08.318 4: autocreate: received 1 event(s) for 'MAX ShutterContact 0a97c6' during the last 60 seconds
2020.03.08 16:44:08.318 4: autocreate: ignoring event for 'MAX ShutterContact 0a97c6': at least 2 needed
2020.03.08 16:44:08.320 1: ERROR: empty name in readingsBeginUpdate
2020.03.08 16:44:08.320 1: stacktrace:
2020.03.08 16:44:08.320 1: main::readingsBeginUpdate called by fhem.pl (4935)
2020.03.08 16:44:08.321 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 16:44:08.321 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 16:44:08.321 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 16:44:08.321 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 16:44:08.321 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 16:44:08.322 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 16:44:08.322 1: main::CallFn called by fhem.pl (756)
2020.03.08 16:44:08.322 1: PERL WARNING: Use of uninitialized value $name in concatenation (.) or string at fhem.pl line 4790.
2020.03.08 16:44:08.322 1: readingsUpdate(,msgcnt,1) missed to call readingsBeginUpdate first.
2020.03.08 16:44:08.322 1: stacktrace:
2020.03.08 16:44:08.323 1: main::readingsBulkUpdate called by fhem.pl (4936)
2020.03.08 16:44:08.323 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 16:44:08.323 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 16:44:08.323 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 16:44:08.323 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 16:44:08.324 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 16:44:08.324 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 16:44:08.324 1: main::CallFn called by fhem.pl (756)
2020.03.08 16:44:08.324 1: PERL WARNING: Use of uninitialized value $d in hash element at fhem.pl line 4543.
2020.03.08 16:44:08.324 4: CULMAX0, send -> cmd:PairPong, msgcnt:01, flags:00, Cmd2id:01, src:MAX_123456 , dst:MAX_0a97c6 , gid:00 , payload:00 , cul:none
2020.03.08 16:44:08.325 5: CULMAX0, send packet: 0b0100011234560a97c60000
2020.03.08 16:44:08.325 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 16:44:08.325 5: SW: X
2020.03.08 16:44:08.327 5: CUL/RAW (ReadAnswer): 21 3600
2020.03.08 16:44:08.333 5: CULMAX0, Send Queue CUL_1 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 3600, CUL_1 CMD_LAST_H: 3
2020.03.08 16:44:08.333 5: CUL_1 sending Zs0b0100011234560a97c60000
2020.03.08 16:44:08.333 5: SW: Zs0b0100011234560a97c60000
2020.03.08 16:44:08.335 4: CULMAX0, Send Queue packet send : Zs0b0100011234560a97c60000 to MAX_0a97c6 with CUL_1
2020.03.08 16:44:09.012 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 16:44:09.513 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 16:44:09.610 5: CUL/RAW: /Z0C0102020A97C6123456000112F9
2020.03.08 16:44:09.611 4: CUL_Parse: CUL_1 Z0C0102020A97C6123456000112F9 -77.5
2020.03.08 16:44:09.612 5: CUL_1: dispatch Z0C0102020A97C6123456000112
2020.03.08 16:44:09.615 3: CULMAX0, source device 0a97c6 has no name !
2020.03.08 16:44:09.616 5: CULMAX0, IODev CUL_1, len 12, msgcnt 01, msgflag 02, msgType Ack, src 0a97c6, dst 123456, group 0, payload 0112, rssi -77.5
2020.03.08 16:44:09.616 1: PERL WARNING: Use of uninitialized value in abs at ./FHEM/14_CUL_MAX.pm line 628.
2020.03.08 16:44:09.617 5: CULMAX0, ACK from MAX_0a97c6 for cmd PairPong , packet will be removed soon
2020.03.08 16:44:09.617 5: CULMAX0, delete packet Index 0 in SendQueue direct !
2020.03.08 16:44:09.618 1: PERL WARNING: Use of uninitialized value in string eq at ./FHEM/14_CUL_MAX.pm line 699.
2020.03.08 16:44:09.618 5: CULMAX0: dispatch MAX,1,Ack,0a97c6,0112
2020.03.08 16:44:09.619 5: MAX_Parse, MAX,1,Ack,0a97c6,0112
2020.03.08 16:44:09.619 1: MAX_Parse, ohne Namen msg: MAX,1,Ack,0a97c6,0112
2020.03.08 16:44:10.015 5: CULMAX0, Send Queue 0 packets in queue
2020.03.08 16:44:12.831 5: CUL/RAW: /**z017B37F101410F0C02250225
**z017B37F10181080F020010032502F2
2020.03.08 16:44:12.833 4: CUL_Parse: CUL_1 **z017B37F101410F0C02250225
2020.03.08 16:44:12.834 5: CUL_1: dispatch **z017B37F101410F0C02250225
2020.03.08 16:44:12.836 4: CUL_Parse: CUL_1 **z017B37F10181080F020010032502F2
2020.03.08 16:44:12.837 5: CUL_1: dispatch **z017B37F10181080F020010032502F2
2020.03.08 16:44:13.078 5: CUL/RAW: /**z017B37F10181080F020010032502F2
2020.03.08 16:44:13.079 4: CUL_Parse: CUL_1 **z017B37F10181080F020010032502F2
2020.03.08 16:44:13.079 5: CUL_1: dispatch **z017B37F10181080F020010032502F2
2020.03.08 16:44:43.341 5: CUL/RAW: /V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
!!!!!!!!!!!!!!! hier wird versucht das Device anzulegen.
2020.03.08 16:44:43.341 4: CUL_Parse: CUL_1 V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
2020.03.08 16:44:55.760 1: PERL WARNING: Use of uninitialized value in string ne at ./FHEM/10_MAX.pm line 138.
2020.03.08 16:44:55.761 1: PERL WARNING: Use of uninitialized value in concatenation (.) or string at ./FHEM/10_MAX.pm line 140.
2020.03.08 16:44:55.761 2: MAX_Define, a Device with addr 0a97c6 is already defined ()
2020.03.08 16:44:55.761 1: define MAX_0a97c6 MAX ShutterContact 0a97c6: MAX_Define, a Device with addr 0a97c6 is already defined ()
2020.03.08 16:45:00.035 2: Ladetzustand: 96.0
Habe wieder die alten Dateien genommen, damit wird das Device angelegt.
pejonp
ja so mitten drin geht das nicht weil schon Teile vorhanden sind, aber halt ohne Namen.
Direkt nach einem FHEM Neustart solltest du den FK aber anlegen können.
okay nach einem Neustart konnte das Device von Hand angelegt werden. Bei autocreate kommt ein Fehler.
2020.03.08 17:20:11.409 4: CUL_Parse: CUL_1 Z170D04000A97C61234560014040F4B455130343734373433F2 -81
2020.03.08 17:20:11.410 5: CUL_1: dispatch Z170D04000A97C61234560014040F4B455130343734373433
2020.03.08 17:20:11.412 5: CULMAX0, IODev CUL_1, len 23, msgcnt 0D, msgflag 04, msgType PairPing, src 0a97c6, dst 123456, group 0, payload 14040F4B455130343734373433, rssi -81
2020.03.08 17:20:11.412 4: CULMAX0, PairPing (dst 123456, pairmode 1), firmware 20, type ShutterContact, testresult 15, serial KEQ0474743
2020.03.08 17:20:11.413 3: CULMAX0, Re-Pairing device MAX_0a97c6 of type ShutterContact with serial KEQ0474743
2020.03.08 17:20:11.413 5: CULMAX0: dispatch MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 17:20:11.414 5: MAX_Parse, MAX,1,define,0a97c6,ShutterContact,KEQ0474743,0
2020.03.08 17:20:11.414 3: MAX_PARSE, got message define for undefined device 0a97c6 type ShutterContact , autocreate is enabled
2020.03.08 17:20:11.463 4: autocreate: received 1 event(s) for 'MAX ShutterContact 0a97c6' during the last 60 seconds
2020.03.08 17:20:11.463 4: autocreate: ignoring event for 'MAX ShutterContact 0a97c6': at least 2 needed
2020.03.08 17:20:11.465 1: ERROR: empty name in readingsBeginUpdate
2020.03.08 17:20:11.465 1: stacktrace:
2020.03.08 17:20:11.465 1: main::readingsBeginUpdate called by fhem.pl (4935)
2020.03.08 17:20:11.466 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 17:20:11.466 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 17:20:11.466 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 17:20:11.466 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 17:20:11.466 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 17:20:11.467 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 17:20:11.467 1: main::CallFn called by fhem.pl (756)
2020.03.08 17:20:11.467 1: PERL WARNING: Use of uninitialized value $name in concatenation (.) or string at fhem.pl line 4790.
2020.03.08 17:20:11.467 1: readingsUpdate(,msgcnt,1) missed to call readingsBeginUpdate first.
2020.03.08 17:20:11.467 1: stacktrace:
2020.03.08 17:20:11.468 1: main::readingsBulkUpdate called by fhem.pl (4936)
2020.03.08 17:20:11.468 1: main::readingsSingleUpdate called by ./FHEM/14_CUL_MAX.pm (889)
2020.03.08 17:20:11.468 1: main::CUL_MAX_Send called by ./FHEM/14_CUL_MAX.pm (826)
2020.03.08 17:20:11.468 1: main::CUL_MAX_Parse called by fhem.pl (3967)
2020.03.08 17:20:11.468 1: main::Dispatch called by ./FHEM/00_CUL.pm (954)
2020.03.08 17:20:11.469 1: main::CUL_Parse called by ./FHEM/00_CUL.pm (832)
2020.03.08 17:20:11.469 1: main::CUL_Read called by fhem.pl (3771)
2020.03.08 17:20:11.469 1: main::CallFn called by fhem.pl (756)
2020.03.08 17:20:11.469 1: PERL WARNING: Use of uninitialized value $d in hash element at fhem.pl line 4543.
2020.03.08 17:20:11.470 4: CULMAX0, send -> cmd:PairPong, msgcnt:01, flags:00, Cmd2id:01, src:MAX_123456 , dst:MAX_0a97c6 , gid:00 , payload:00 , cul:none
2020.03.08 17:20:11.470 5: CULMAX0, send packet: 0b0100011234560a97c60000
2020.03.08 17:20:11.470 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 17:20:11.471 5: SW: X
2020.03.08 17:20:11.472 5: CUL/RAW (ReadAnswer): 21 2924
2020.03.08 17:20:11.478 5: CULMAX0, Send Queue CUL_1 -> needPreamble: 1, necessaryCredit: 110, credit10ms: 2924, CUL_1 CMD_LAST_H: 3
2020.03.08 17:20:11.478 5: CUL_1 sending Zs0b0100011234560a97c60000
2020.03.08 17:20:11.478 5: SW: Zs0b0100011234560a97c60000
2020.03.08 17:20:11.480 4: CULMAX0, Send Queue packet send : Zs0b0100011234560a97c60000 to MAX_0a97c6 with CUL_1
2020.03.08 17:20:11.971 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 17:20:12.473 5: CULMAX0, Send Queue 1 packet in queue
2020.03.08 17:20:12.647 5: CUL/RAW: /Z0C0102020A97C612345600011204
2020.03.08 17:20:12.649 4: CUL_Parse: CUL_1 Z0C0102020A97C612345600011204 -72
2020.03.08 17:20:12.650 5: CUL_1: dispatch Z0C0102020A97C6123456000112
2020.03.08 17:20:12.652 3: CULMAX0, source device 0a97c6 has no name !
2020.03.08 17:20:12.652 5: CULMAX0, IODev CUL_1, len 12, msgcnt 01, msgflag 02, msgType Ack, src 0a97c6, dst 123456, group 0, payload 0112, rssi -72
2020.03.08 17:20:12.652 1: PERL WARNING: Use of uninitialized value in abs at ./FHEM/14_CUL_MAX.pm line 628.
2020.03.08 17:20:12.653 5: CULMAX0, ACK from MAX_0a97c6 for cmd PairPong , packet will be removed soon
2020.03.08 17:20:12.653 5: CULMAX0, delete packet Index 0 in SendQueue direct !
2020.03.08 17:20:12.653 1: PERL WARNING: Use of uninitialized value in string eq at ./FHEM/14_CUL_MAX.pm line 699.
2020.03.08 17:20:12.654 5: CULMAX0: dispatch MAX,1,Ack,0a97c6,0112
2020.03.08 17:20:12.654 5: MAX_Parse, MAX,1,Ack,0a97c6,0112
2020.03.08 17:20:12.654 1: MAX_Parse, ohne Namen msg: MAX,1,Ack,0a97c6,0112
2020.03.08 17:20:12.974 5: CULMAX0, Send Queue 0 packets in queue
2020.03.08 17:20:14.381 5: CUL/RAW: /**z017B37F10141060C0225022C
**z017B37F10141060C0225022C
**z017B37F101810B0F020010032502F1
2020.03.08 17:20:14.382 4: CUL_Parse: CUL_1 **z017B37F10141060C0225022C
2020.03.08 17:20:14.386 5: CUL_1: dispatch **z017B37F10141060C0225022C
2020.03.08 17:20:14.388 4: CUL_Parse: CUL_1 **z017B37F10141060C0225022C
2020.03.08 17:20:14.389 5: CUL_1: dispatch **z017B37F10141060C0225022C
2020.03.08 17:20:14.391 4: CUL_Parse: CUL_1 **z017B37F101810B0F020010032502F1
2020.03.08 17:20:14.392 5: CUL_1: dispatch **z017B37F101810B0F020010032502F1
2020.03.08 17:20:23.747 1: PERL WARNING: Use of uninitialized value in numeric gt (>) at ./FHEM/10_MAX.pm line 814.
2020.03.08 17:20:23.758 1: PERL WARNING: Use of uninitialized value in int at ./FHEM/10_MAX.pm line 888.
2020.03.08 17:20:23.768 1: PERL WARNING: Use of uninitialized value in numeric gt (>) at ./FHEM/10_MAX.pm line 846.
2020.03.08 17:20:23.920 1: PERL WARNING: Use of uninitialized value in numeric gt (>) at ./FHEM/10_MAX.pm line 831.
2020.03.08 17:20:44.612 5: CUL/RAW: /V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
2020.03.08 17:20:44.612 4: CUL_Parse: CUL_1 V 1.26.05 a-culfw Build: private build (unknown) CUBEx4_87 (F-Band: 868MHz)
2020.03.08 17:20:47.331 5: CUL/RAW: /*A1437845E24A759000000851C0F00000400000925010B
pejonp
ich bin da z.Z. auch am testen : schuld ist offensichtlich der pairmode am CULMAX Device.
Also den erst einmal nicht setzen !
Autocreate brauch zwei Nachrichten innerhalb von 60 Sekunden und die bekommt es nicht wenn pairmode aktiv ist.
Ich muß mir da jetzt was einfallen lassen da das bisher nie ein Problem war.
ok, gefunden : das mit den 2 mal innerhalb von 60 Sekunden habe ich vor einiger Zeit selbst in der 10_MAX hinterlegt.
Habe es nun wieder entfernt und 10_MAX und 14_CUL_MAX im Beta Thread getauscht
@Wzut
ok, funktioniert mit deinen Dateien.
pejonp