FHEM Forum

Moin zusammen,

beim "lösen" der Verbindung (associate) zwischen HT und FK bekomme ich im HT Device immer die error Nachricht als Reading "Invalid command/argument 81190009". Ich wähle den zu entfernenden peer aus der DropDown Liste aus. Der FK bleibt somit weiterhin in der peer Liste des HT stehen und ob er nun wirklich raus ist oder nicht, keine Ahnung...

Hat jemand dieses Problem auch beobachtet?

Danke und Gruß
Arne

Da brauch ein paar Infos mehr , am besten die beiden Partner und das CM Device auf verbose 5 stellen, den Befehl ausführen und dann den entsprechenden Log Abschnitt hier posten. Geht es nur in eine Richtung schief oder lässt sich die Gegenseite lösen ?

Habe jetzt ein wenig rumgespielt. HT, FK und cm device auf verbose 5 gesetzt. Dabei ist mir aufgefallen, dass alle associates und deassociates in der sendqueue "hängen" bleiben. Und das bei unterschiedlichen FK und HT Kombinationen. Immer verbunden mit "Fenster auf, ein wenig gewartet", "Fenster zu, ein wenig gewartet" und das mehrfach. Die Queue wird nicht geleert bzw. versendet. Trotzdem reagiert der HT auf ein geöffnetes Fenster (Symbol im Display erscheint). Der Auszug aus dem Log (hier associate) wiederholt sich ständig. Was auffällt ist der angeblich vorhandene zweite CUL. Habe ich nicht...

2020.09.15 14:51:34 5: cm, Send Queue 2 packets in queue
2020.09.15 14:51:34 4: cm, Send Queue packet for ShutterContact MAX_Wohnzimmertuer_FK exists
2020.09.15 14:51:34 5: cm, IODev CULMAX, len 11, msgcnt BA, msgflag 00, msgType Ack, src 123456, dst 1a64db, group 0, payload 00, rssi -74
2020.09.15 14:51:34 4: cm, packet from ourselves or a other CUL [123456 / 0], - ignoring !
2020.09.15 14:51:34 5: cm, IODev CULMAX, len 11, msgcnt BA, msgflag 06, msgType ShutterContactState, src 1a64db, dst 123456, group 0, payload 12, rssi -50
2020.09.15 14:51:34 5: cm: dispatch MAX,1,ShutterContactState,1a64db,12
2020.09.15 14:51:34 5: MAX_Parse, MAX,1,ShutterContactState,1a64db,12
2020.09.15 14:51:34 5: MAX_Wohnzimmertuer_FK, bat 0, rferror 0, isopen 1, unkbits 0
2020.09.15 14:51:37 5: cm, Send Queue 2 packets in queue
2020.09.15 14:51:37 4: cm, Send Queue packet for ShutterContact MAX_Wohnzimmertuer_FK exists
2020.09.15 14:51:40 5: cm, Send Queue 2 packets in queue
2020.09.15 14:51:40 4: cm, Send Queue packet for ShutterContact MAX_Wohnzimmertuer_FK exists
2020.09.15 14:51:43 5: cm, Send Queue 2 packets in queue
2020.09.15 14:51:43 4: cm, Send Queue packet for ShutterContact MAX_Wohnzimmertuer_FK exists
2020.09.15 14:51:43 5: cm, IODev CULMAX, len 11, msgcnt BB, msgflag 00, msgType Ack, src 123456, dst 1a64db, group 0, payload 00, rssi -74
2020.09.15 14:51:43 4: cm, packet from ourselves or a other CUL [123456 / 0], - ignoring !
2020.09.15 14:51:43 5: cm, IODev CULMAX, len 11, msgcnt BB, msgflag 06, msgType ShutterContactState, src 1a64db, dst 123456, group 0, payload 10, rssi -59.5
2020.09.15 14:51:43 5: cm: dispatch MAX,1,ShutterContactState,1a64db,10
2020.09.15 14:51:43 5: MAX_Parse, MAX,1,ShutterContactState,1a64db,10
2020.09.15 14:51:43 5: MAX_Wohnzimmertuer_FK, bat 0, rferror 0, isopen 0, unkbits 0
2020.09.15 14:51:46 5: cm, Send Queue 2 packets in queue
2020.09.15 14:51:46 4: cm, Send Queue packet for ShutterContact MAX_Wohnzimmertuer_FK exists

ok,
a. nur mit Fenster auf/zu weckst du den FK nicht ! Das ist so ein Mythos der sich hartnäckig hält aber halt nicht der Wahrheit entspricht.
Aufwecken zum pairing bzw unpairing geht nur mit dem config Knopf ! Erst dann werden die wartenden Telegramme in der Sendqueue abgerabeitet, sieht man dann auch wieder im Log. Dein HT reagiert auf den nicht gepeerten FK weil dieser Brodcast Nachrichten verschickt, auch das kannst du du in den Readings des FK sehen wenn du das Attribut debug setzt. ( Reading sendTo_ )

b. ich sehe da keinen zweiten CUL lediglich
packet from ourselves or a other CUL [123456 / 0], - ignoring !
wobei bei dir vermutlich ourselves zutrifft falls dein cm Device mit der MAX Id 123456 läuft.

Danke, das war es.

Ich hänge mich mal an diesen Thread, weil er mein erster und halbwegs zielführender Google-Treffer war. Meine Situation:

• CUL auf Adresse 123456
• WT ist noch mit einem der durch Baustaub zerstörten MAXe gepairt - das kostet mutmaßlich Batterie

Ich erhalte für das Wandthermostat (eg_wohnz_wt1) ein
2020-10-25_06:35:30 eg_wohnz_wt1 peerList: Broadcast,MAX_150e15,eg_wohnz_t1,eg_wohnz_t2,eg_wohnz_t3
2020-10-25_06:35:30 eg_wohnz_wt1 peerIDs: 000000,150e15,15f8ad,16015e,160171

Daraufhin habe ich mir zunächst wieder den MAX_150e15 definiert - das Gerät hatte ich wahrscheinlich schon gelöscht.
Wenn ich jetzt
set eg_wohnz_wt1 deassociate MAX_150e15
aufrufe, erhalte ich im Logfile auf verbose 5:


2020-10-25_08:10:00 eg_wohnz_wt1 lastcmd: set_deassociate MAX_150e15
2020-10-25_08:10:03 eg_wohnz_wt1 error: Invalid command/argument  8119012A


und für die CUL:


2020.10.25 08:10:00 4: eg_wohnz_wt1, Setting deassociate, Destination 150e15, destType 1 [HeatingThermostat]
2020.10.25 08:10:01 4: cm, send -> cmd:RemoveLinkPartner, msgcnt:52, flags:00, Cmd2id:21, src:MAX_123456 , dst:eg_wohnz_wt1 , gid:00 , payload:150e1501 , cul:none
2020.10.25 08:10:01 5: cm, send packet: 0e520021123456156f9900150e1501
2020.10.25 08:10:01 5: cm, Send Queue 1 packet in queue
2020.10.25 08:10:01 5: cm, Send Queue CUL_0 -> needPreamble: 1, necessaryCredit: 112, credit10ms: 900, CUL_0 CMD_LAST_H: 10
2020.10.25 08:10:01 4: cm, Send Queue packet send : Zs0e520021123456156f9900150e1501 to eg_wohnz_wt1 with CUL_0
2020.10.25 08:10:02 5: cm, Send Queue 1 packet in queue
2020.10.25 08:10:03 5: cm, IODev CUL_0, len 14, msgcnt 52, msgflag 02, msgType Ack, src 156f99, dst 123456, group 0, payload 8119012A, rssi -73.5
2020.10.25 08:10:03 4: cm, NACK from eg_wohnz_wt1 for cmd RemoveLinkPartner !
2020.10.25 08:10:03 5: cm: dispatch MAX,1,Ack,156f99,8119012A
2020.10.25 08:10:03 5: MAX_Parse, MAX,1,Ack,156f99,8119012A
2020.10.25 08:10:03 1: MAX_Parse, device eg_wohnz_wt1 answered with: Invalid command/argument 8119012A
2020.10.25 08:10:03 5: cm, Send Queue 1 packet in queue
2020.10.25 08:10:03 4: cm, Send Queue NACK from eg_wohnz_wt1 for RemoveLinkPartner, removing from queue
2020.10.25 08:10:03 5: cm, Send Queue is now empty


Ich weiß, dass es ggf. Mecker gibt, aber meine CUL läuft auf:

V 1.66_nocredits CUL868


Ich hoffe, dass das irrelevant ist.

Leider endet dein Log Abschnitt bevor das deassoc ausgeführt wird und das NACK vom WT kommt.

Sorry! Ich habe - um den Thread nicht vollzumüllen - die (hoffentlich) vollständige Antwort eines erneuten Versuchs in meinen obigen Beitrag reineditiert.

OK, da kommt ein NACK vom WT zurück. Es gibt noch eine ähnliche Meldung hier im Forum zum Thema deasso fakeShutterContact.
Da frage ich mich jetzt, hat das überhaupt jemals richtig funktioniert oder habe ich da was verschlimmbessert.
Bleibt wohl nur ein Test mit einem orginal Cube um zu sehen was der in so einem Fall dem Gerät schickt und wie dessen Antwort dann ausschaut.

Für dich bleibt dann bis dahin nur die Möglichkeit das WT einem Werksreset zu unterziehen (drei Finger Griff oder set factoryReset) und danach neu pairen und alle Parameter neu setzen. Sollte mit saveConfig und restore schnell gehen. Die beiden Readings peerList & peerId dann löschen und sich neu aufbauen lassen.

Moin!
Ich hänge mich mal hier dran, wenn es erlaubt ist.

Ich habe dasselbe Problem, Ich habe einen  WT und einen HT, die mal zusammengearbeitet haben. Nun soll der HT standalone arbeiten, also habe ich versucht, die Geräte per 'deassociate' zu trennen.
Die erste Frage : Das muss man doch beidseitig machen, oder? Alles andere scheint mir sonst unlogisch.....
Vom WT kommt auch ein ACK, vom HT ein NACK, im WT steht aber danach das WT noch in der peerList, außerdem hat das WT einen rferror. Verbose 5 auf meinem CUL_MAX zeigt mir auch an dass die Adresse des HT weiterhin in den Sendepaketen des WT drinsteht, der antwortet aber trotz des NACK nicht mehr.

Das 'Poblem' ist, dass da ein Zimmer komplett läuft mit WT, HT und zwei FK, der extra HT (im Zimmer davor) sollte nur vorübergehend mit dem WT gesteuert werden, da da ein Heizungsventil defekt war und die Heizung im Raum nur warm wurde, wenn die Heizung davor auch aufgedreht war. Außerdem ist das Zimmer vermietet und ich möchte da nicht so drin rumbasteln müssen, wenn es auch per FHEM geht. Ich hab jetzt einen factory reset des überzähligen HT gemacht, aber eigentlich habe ich keine Lust, das ganze Zimmer neu anzulernen, wenn es einen anderen Weg gibt :-)
Irgendwie muss das doch gehen? Vielleicht setzte ich mal ein zweites FHEM mit NanoCUL auf, wo ich die alten MAX-Module reindengele? Gibt es die noch irgendwo?
MfG
Volker

Sicher das Peering muss auf beiden Seiten gelöst werden. Das ganze Thema Peering /Unpeering gefällt mir in den Modulen noch nicht, insbesondere das Geschüttel bei den FKs.
Wenn ich ab 10 Dezember dann endlich Renter bin kann ich mir das Thema nochmal in Ruhe vornehmen, d.h. alles via ELV Software und original CUBE FW machen und mitschneiden.
Bis dahin bleibt dann wohl nur der Weg via Werksreset, wobei das mittels saveConfig und restoreDevice schnell erledigt ist.   

Danke für die Bestätigung!
Und von meiner Seite keinen Stress, es funktioniert ja so, wie es soll.
Eine Frage hätte ich da noch : Wenn ich jetzt beim WT saveconfig - factory reset - restoredevice mache, stimmen dann auch die pairings mit dem anderen HT und den FKs wieder? Oder muss ich die neu verknüpfen? Ich werde da aus dem hier diesbezüglich nicht so ganz schlau :

https://forum.fhem.de/index.php?topic=106258.0

was genau macht restoreDevice? stellt das ein in FHEM gelöschtes Device mit den vorher per saveconfig gesicherten Daten wieder her? Oder überträgt es eine vorhandene Konfigruation an das Device, also sowas wie BoostDuration,Weekplan etc.? Sind da dann auch die device pairings dabei? Oder beides?

Danke auf alle Fälle, dass Du da weiterentwickelst, mein ganzes Haus ist hier verMAXd :-)

mach einfach mal ein set <name> saveConfig und schau dir die Ausgabe dann mit Hilfe von get <name> show_savedConfig <name> an
alles was mit setreading beginnt wird bei restoreReadings ausgeführt, also lediglich in FHEM
Die Zeilen die mit set xxx beginnen werden so auch an das Device übertragen bei restoreDevice.
In all diesen Zeilen wirst du kein set <name> associate finden, d.h. die werden nicht ausgeführt.

Das probiere ich am WE mal :-)
Schade, ich hatte ja wider besseren Wissens gehofft, dass ich das hinkriege, ohne an die Hardware zu müssen..... :-)

Hi,

ich habe das gleiche Problem.
2 HT gepairt. Diese wollte ich nun "aufbrechen". DAbei ist mein FHEM abgestürzt:
Can't use string ("Heizung_WZ") as a HASH ref while "strict refs" in use at fhem.pl line 4992.
Nun ist eins beim anderen draußen.
Aber nicht beide. Was kann ich tun. Was sollte ich wo tun.
Ich steige nicht mehr durch und es lief halt seit der Einrichtung vor Jahren problemlos so dass ich nun alles vergessen habe :)

siehe Antwort #8

Was den FHEM Absturz betrifft : da war ein Tippfehler in 10_MAX.pm ($sname statt $shash) , den habe ich eben ausgebessert.
Die Version gibt es morgen ab 8:00 Uhr via update

Zitat von: Wzut am 03 Dezember 2020, 19:03:39
Was den FHEM Absturz betrifft : da war ein Tippfehler in 10_MAX.pm ($sname statt $shash) , den habe ich eben ausgebessert.
Die Version gibt es morgen ab 8:00 Uhr via update

HILFE: Habe gerade geupdated.
Nun vermisse ich alle :)
Kannst du schnell helfen? Was brauchst du:

2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validTemperature redefined at ./FHEM/10_MAX.pm line 117, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseTemperature redefined at ./FHEM/10_MAX.pm line 120, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWindowOpenDuration redefined at ./FHEM/10_MAX.pm line 121, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validMeasurementOffset redefined at ./FHEM/10_MAX.pm line 122, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validBoostDuration redefined at ./FHEM/10_MAX.pm line 123, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validValveposition redefined at ./FHEM/10_MAX.pm line 124, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWeekProfile redefined at ./FHEM/10_MAX.pm line 125, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validGroupid redefined at ./FHEM/10_MAX.pm line 126, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validDecalcification redefined at ./FHEM/10_MAX.pm line 128, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Initialize redefined at ./FHEM/10_MAX.pm line 133, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Define redefined at ./FHEM/10_MAX.pm line 156, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Timer redefined at ./FHEM/10_MAX.pm line 248, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Attr redefined at ./FHEM/10_MAX.pm line 315, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Undef redefined at ./FHEM/10_MAX.pm line 366, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_TypeToTypeId redefined at ./FHEM/10_MAX.pm line 372, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_CheckIODev redefined at ./FHEM/10_MAX.pm line 380, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_SerializeTemperature redefined at ./FHEM/10_MAX.pm line 391, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Validate redefined at ./FHEM/10_MAX.pm line 402, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ReadingsVal redefined at ./FHEM/10_MAX.pm line 410, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseWeekProfile redefined at ./FHEM/10_MAX.pm line 445, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_WakeUp redefined at ./FHEM/10_MAX.pm line 541, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Get redefined at ./FHEM/10_MAX.pm line 547, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Set redefined at ./FHEM/10_MAX.pm line 577, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Save redefined at ./FHEM/10_MAX.pm line 1285, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_saveConfig redefined at ./FHEM/10_MAX.pm line 1303, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAXX_Restore redefined at ./FHEM/10_MAX.pm line 1402, <$fh> line 1677.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseDateTime redefined at ./FHEM/10_MAX.pm line 1441, <$fh> line 1677.
2020.12.04 10:51:23 1: reload: Error:Modul 10_MAX deactivated:
syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1677.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

2020.12.04 10:51:23 0: syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1677.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1677.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1677.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validTemperature redefined at ./FHEM/10_MAX.pm line 117, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseTemperature redefined at ./FHEM/10_MAX.pm line 120, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWindowOpenDuration redefined at ./FHEM/10_MAX.pm line 121, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validMeasurementOffset redefined at ./FHEM/10_MAX.pm line 122, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validBoostDuration redefined at ./FHEM/10_MAX.pm line 123, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validValveposition redefined at ./FHEM/10_MAX.pm line 124, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWeekProfile redefined at ./FHEM/10_MAX.pm line 125, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validGroupid redefined at ./FHEM/10_MAX.pm line 126, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validDecalcification redefined at ./FHEM/10_MAX.pm line 128, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Initialize redefined at ./FHEM/10_MAX.pm line 133, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Define redefined at ./FHEM/10_MAX.pm line 156, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Timer redefined at ./FHEM/10_MAX.pm line 248, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Attr redefined at ./FHEM/10_MAX.pm line 315, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Undef redefined at ./FHEM/10_MAX.pm line 366, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_TypeToTypeId redefined at ./FHEM/10_MAX.pm line 372, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_CheckIODev redefined at ./FHEM/10_MAX.pm line 380, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_SerializeTemperature redefined at ./FHEM/10_MAX.pm line 391, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Validate redefined at ./FHEM/10_MAX.pm line 402, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ReadingsVal redefined at ./FHEM/10_MAX.pm line 410, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseWeekProfile redefined at ./FHEM/10_MAX.pm line 445, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_WakeUp redefined at ./FHEM/10_MAX.pm line 541, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Get redefined at ./FHEM/10_MAX.pm line 547, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Set redefined at ./FHEM/10_MAX.pm line 577, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Save redefined at ./FHEM/10_MAX.pm line 1285, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_saveConfig redefined at ./FHEM/10_MAX.pm line 1303, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAXX_Restore redefined at ./FHEM/10_MAX.pm line 1402, <$fh> line 1689.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseDateTime redefined at ./FHEM/10_MAX.pm line 1441, <$fh> line 1689.
2020.12.04 10:51:23 1: reload: Error:Modul 10_MAX deactivated:
syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1689.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

2020.12.04 10:51:23 0: syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1689.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1689.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1689.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validTemperature redefined at ./FHEM/10_MAX.pm line 117, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseTemperature redefined at ./FHEM/10_MAX.pm line 120, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWindowOpenDuration redefined at ./FHEM/10_MAX.pm line 121, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validMeasurementOffset redefined at ./FHEM/10_MAX.pm line 122, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validBoostDuration redefined at ./FHEM/10_MAX.pm line 123, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validValveposition redefined at ./FHEM/10_MAX.pm line 124, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validWeekProfile redefined at ./FHEM/10_MAX.pm line 125, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validGroupid redefined at ./FHEM/10_MAX.pm line 126, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_validDecalcification redefined at ./FHEM/10_MAX.pm line 128, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Initialize redefined at ./FHEM/10_MAX.pm line 133, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Define redefined at ./FHEM/10_MAX.pm line 156, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Timer redefined at ./FHEM/10_MAX.pm line 248, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Attr redefined at ./FHEM/10_MAX.pm line 315, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Undef redefined at ./FHEM/10_MAX.pm line 366, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_TypeToTypeId redefined at ./FHEM/10_MAX.pm line 372, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_CheckIODev redefined at ./FHEM/10_MAX.pm line 380, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_SerializeTemperature redefined at ./FHEM/10_MAX.pm line 391, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Validate redefined at ./FHEM/10_MAX.pm line 402, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ReadingsVal redefined at ./FHEM/10_MAX.pm line 410, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseWeekProfile redefined at ./FHEM/10_MAX.pm line 445, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_WakeUp redefined at ./FHEM/10_MAX.pm line 541, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Get redefined at ./FHEM/10_MAX.pm line 547, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Set redefined at ./FHEM/10_MAX.pm line 577, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_Save redefined at ./FHEM/10_MAX.pm line 1285, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_saveConfig redefined at ./FHEM/10_MAX.pm line 1303, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAXX_Restore redefined at ./FHEM/10_MAX.pm line 1402, <$fh> line 1704.
2020.12.04 10:51:23 1: PERL WARNING: Subroutine MAX_ParseDateTime redefined at ./FHEM/10_MAX.pm line 1441, <$fh> line 1704.
2020.12.04 10:51:23 1: reload: Error:Modul 10_MAX deactivated:
syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1704.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

2020.12.04 10:51:23 0: syntax error at ./FHEM/10_MAX.pm line 1964, near ")
      &&"
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1964, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1965, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1967, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1970, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1971, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1972, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1973, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1974, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1975, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1976, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1980, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1982, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1983, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1985, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1987, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1988, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1992, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1993, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1994, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 1999, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2001, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2003, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2005, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2007, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2008, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2010, <$fh> line 1704.
Global symbol "$sname" requires explicit package name at ./FHEM/10_MAX.pm line 2012, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2013, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2015, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2018, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2020, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2021, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2022, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2023, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2024, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2025, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2026, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2027, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2028, <$fh> line 1704.
Global symbol "$shash" requires explicit package name at ./FHEM/10_MAX.pm line 2030, <$fh> line 1704.
syntax error at ./FHEM/10_MAX.pm line 2031, near "}"
./FHEM/10_MAX.pm has too many errors.

Cannot load module MAX
Please define Heizung_WZ 5c49df82-f33f-a3b0-b900-0ab048702ad10ff8 first
Cannot load module MAX
Please define Heizung_Tim 5c49df82-f33f-a3b0-8d16-2fcda6252663f06b first
Cannot load module MAX
Please define Heizung_Mats 5c49df82-f33f-a3b0-f2e6-ba77cc91b3d21823 first
Cannot load module MAX
Please define Heizung_BZ 5c49df85-f33f-a3b0-1040-f0a2047176a7bea9 first
Cannot load module MAX
Please define Heizung_Flur 5c49df85-f33f-a3b0-80b9-4bda8e33f815030a first
Cannot load module MAX

Das Modul zeigt Fehler an einer Stelle wo ich gar nichts geändert habe, verstehe ich jetzt nicht so richtig was da passiert ist.
Ich habe jetzt eine neue Version hochgeladen, d.h. entweder wieder ab morgen 8:00 Uhr
oder direkt aus dem svn holen
oder die alte benutzen
oder die aktuelle Beta -> https://forum.fhem.de/index.php/topic,115018.0.html

Ich habe gerade meinen backup eingespielt.

Muss ich bei der beta irgendwas besonderes beachten?
WEnn nicht würde ich dahin wehcseln - warum nicht :)

eigentlich nein, wenn du aber 14_CUL_MAX benutzt würde ich beide tauschen.