Hallo Zusammen,
seit ca. 3-4 Wochen funktioniert meine Gruppensteuerung über Alexa nicht mehr, also in Alexa habe ich 2 Gruppen:
Gruppe(n)
Schlafzimmer Rollos (2 Rollos)
Wohnzimmer Rollos (2 Rollos)
Sprachbefehl : Alexa, Wohnzimmer Rollos auf 95%.
Antwort: Wohnzimmer Rollos unterstützt das nicht.
es ging aber vor 2-3 Wochen und das über 1 bis 2 Jahre
Habe jetzt gemerkt wenn ich genericDeviceType von "Blind" auf "light" ändere und die Rollos in Alexa neu einbinde und die Gruppe erstelle zB. Schlafzimmer Rollos
funktioniert mein Sprachbefehl wieder.
Anbei ein List von zB Wohnzimmer Rollos Links:
Internals:
.eventMapCmd up:noArg down:noArg
DEF c7abb922 11
FUUID 5c574501-f33f-6e03-fd79-5a9db9cfaa66df0c
IODev ZWAVE1
LASTInputDev ZWAVE1
MSGCNT 2
NAME SZ_Rollo_Links
NR 61
STATE 99
TYPE ZWave
ZWAVE1_MSGCNT 2
ZWAVE1_RAWMSG 0004000b06310504220000
ZWAVE1_TIME 2020-11-19 16:14:16
ZWaveSubDevice no
homeId c7abb922
isWakeUp
nodeIdHex 0b
.attraggr:
.attrminint:
.vclasses:
ASSOCIATION 2
CONFIGURATION 1
MANUFACTURER_PROPRIETARY 1
MANUFACTURER_SPECIFIC 1
METER 2
MULTI_CHANNEL_ASSOCIATION 2
POWERLEVEL 1
PROTECTION 2
SCENE_ACTIVATION 1
SENSOR_MULTILEVEL 2
SWITCH_BINARY 1
SWITCH_MULTILEVEL 3
VERSION 1
READINGS:
2019-02-09 22:07:46 assocGroup_1 Max 16 Nodes ZWAVE1
2019-02-09 22:07:46 assocGroup_2 Max 16 Nodes
2019-02-09 22:07:46 assocGroup_3 Max 1 Nodes ZWAVE1
2019-02-09 22:07:46 assocGroups 3
2019-02-09 22:07:50 configEnergyReports 10
2019-02-09 22:07:50 configInRollerBlindModeOrVenetianBlind17 10
2019-02-09 22:07:50 configInVenetianBlindModeTheParameter12 150
2019-02-09 22:07:55 configManagingLamellasInResponseTo35 SetLamellasToTheirExtreme1
2019-02-09 22:07:55 configMotorOperationDetection 10
2019-02-09 22:07:55 configMotorOperationTime 240
2019-02-09 22:07:55 configPeriodicPowerOrEnergyReports 3600
2019-02-09 22:07:56 configPowerReports 10
2019-02-09 22:08:01 configReportsType BlindPositionReportsSentToThe1
2019-02-09 22:08:01 configResponseToFloodingAlarm NoReaction
2019-02-09 22:08:01 configResponseToGeneralAlarm CloseBlind
2019-02-09 22:08:01 configResponseToSmokeCOOrCO2Alarm OpenBlind
2019-02-09 22:08:01 configResponseToTemperatureAlarm OpenBlind
2019-02-09 22:08:02 configRollerShutterOperatingModes 1RollerBlindModeWithPositioning
2019-02-09 22:08:02 configScenesAssociationsActivation AssociationsActivation
2019-02-09 22:08:02 configSelfMeasurement SelfMeasurementInactive
2019-02-09 22:08:02 configSetLamellasBackToPrevious13 1LamellasReturnToPreviouslySet1
2019-02-09 22:08:02 configSwitchType MomentarySwitches
2020-11-19 15:51:43 energy 2.14 kWh
2019-02-09 22:08:02 mcaGroups 2
2019-02-09 22:08:05 mca_1 Max 7 Nodes ZWAVE1
2019-02-09 22:08:05 mca_2 Max 7
2017-09-06 18:51:39 model FIBARO System FGRM222 Roller Shutter Controller 2
2017-09-06 18:51:39 modelConfig fibaro/fgrm222.xml
2017-09-06 18:51:39 modelId 010f-0302-1000
2020-11-19 15:14:17 position 99
2020-11-19 16:14:16 power 0.0 W
2017-09-25 14:47:42 reportedState dim 20
2020-11-19 16:14:16 statEnergy Hour: 0.00 Day: 0.01 Month: 0.04 Year: 0.55
2020-11-19 15:59:56 statEnergyLast Hour: 0.00 Day: 0.00 Month: 0.05 Year: 0.50 (since: 2019-02-26 )
2020-11-19 16:14:16 statPowerDay Min: 0.0 Avg: 0.1 Max: 152.9
2020-11-18 23:59:56 statPowerDayLast Min: 0.0 Avg: 0.1 Max: 154.8
2020-11-19 16:14:16 statPowerMonth Min: 0.0 Avg: 0.1 Max: 155.2
2020-10-31 23:59:56 statPowerMonthLast Min: 0.0 Avg: 0.1 Max: 158.7
2020-11-19 16:14:16 statPowerYear Min: 0.0 Avg: 0.1 Max: 160.0
2019-12-31 23:59:56 statPowerYearLast Min: 0.0 Avg: 0.1 Max: 158.0 (since: 2019-02-25_20:36:29 )
2020-11-19 15:14:12 state dim 99
2019-02-07 02:26:56 status up
2020-11-19 15:14:13 timeToAck 0.534
2020-11-19 15:14:13 transmit OK
helper:
_98_statistics Statistik
Attributes:
IODev ZWAVE1
alexaName Schlafzimmer Rollo Links
alexaRoom Schlafzimmer
alle_Rollos alle_Rollos
classes MULTI_CHANNEL_ASSOCIATION MANUFACTURER_SPECIFIC VERSION CONFIGURATION ASSOCIATION POWERLEVEL METER SWITCH_MULTILEVEL SENSOR_MULTILEVEL SWITCH_BINARY MANUFACTURER_PROPRIETARY PROTECTION MARK METER SENSOR_MULTILEVEL MANUFACTURER_PROPRIETARY SCENE_ACTIVATION SWITCH_MULTILEVEL SWITCH_BINARY
devStateIcon up:fts_shutter_10@green down:fts_shutter_100@white s/[0-9]|1\d.*:fts_shutter_90 s/[0-9]|2\d.*:fts_shutter_80 s/[0-9]|3\d.*:fts_shutter_70 s/[0-9]|4\d.*:fts_shutter_60 s/[0-9]|5\d.*:fts_shutter_50 s/[0-9]|6\d.*:fts_shutter_40 s/[0-9]|7\d.*:fts_shutter_30 s/[0-9]|8\d.*:fts_shutter_20 s/[0-9]|9\d.*:fts_shutter_10 s/[0-9]|99\d.*:fts_shutter_10
eventMap on:up off:down
fp_Grundriss 574,1294,1,Rollo Links
genericDeviceType blind
group Rollo
homebridgeMapping clear CurrentPosition=position,minValue=0,maxValue=99 TargetPosition=dim::position,minValue=0,maxValue=99,minStep=1
icon fts_shutter_10
room Homekit,Wohnung,ZWave,alexa
stateFormat position
userattr SZ_Rollos SZ_Rollos_map alle_Rollos alle_Rollos_map structexclude
vclasses ASSOCIATION:2 CONFIGURATION:1 MANUFACTURER_PROPRIETARY:1 MANUFACTURER_SPECIFIC:1 METER:2 MULTI_CHANNEL_ASSOCIATION:2 POWERLEVEL:1 PROTECTION:2 SCENE_ACTIVATION:1 SENSOR_MULTILEVEL:2 SWITCH_BINARY:1 SWITCH_MULTILEVEL:3 VERSION:1
webCmd dim:up:down:dim 20:dim 40:dim 60:dim 80
so würde es nicht funktionieren nur als
genericDeviceType light
Hat jemand eine Idee, könnte es auch so lassen aber das Zeigt mir Alexa in der app Lampe Statt Rolloaden als icon an.
Danke
Hi,
also konnte das Problem nicht lösen aber umgehen.
Komischerweise will Alexa die Rollos als Alexa App. Gruppe nicht mehr auf zb: 70% stellen.
Habe jetzt Wohnzimmer und Schlafzimmer als Structur erstellt
zB: Wohnzimmer Rollos
Internals:
.cachedHelp Unknown argument ?, choose one of associationAdd associationDel blink configByte configDefault configEnergyReports configForcedRollerShutterCalibration configInRollerBlindModeOrVenetianBlind17 configInVenetianBlindModeTheParameter12 configLocalProtection configLong configManagingLamellasInResponseTo35 configMotorOperationDetection configMotorOperationTime configPeriodicPowerOrEnergyReports configPowerReports configRFProtectionRadioProtection configReportsType configResponseToFloodingAlarm configResponseToGeneralAlarm configResponseToSmokeCOOrCO2Alarm configResponseToTemperatureAlarm configRollerShutterOperatingModes configScenesAssociationsActivation configSelfMeasurement configSetLamellasBackToPrevious13 configSwitchType configWord dim dimUpDown dimUpDownIncDecWithDuration dimUpDownWithDuration dimWithDuration intervals mcaAdd mcaDel meterReset neighborUpdate off-for-timer off-till off-till-overnight off on-for-timer on-till on-till-overnight on positionBlinds positionSlat powerlevel powerlevelTest protectionBytes protectionOff protectionOn protectionSeq returnRouteAdd returnRouteDel sceneActivate stop sucRouteAdd sucRouteDel toggle saveStructState restoreStructState
.eventMapCmd up down
ATTR WZ_Rollos
CHANGEDCNT 794
DEF WZ_Rollos WZ_Rollo_Links WZ_Rollo_Rechts
FUUID 5c6acf86-f33f-6e03-172f-ce4fbebe0ae61385
NAME WZ_Rollos
NR 146
NTFY_ORDER 50-WZ_Rollos
STATE dim 85
TYPE structure
.asyncQueue:
.attraggr:
.attrminint:
.memberHash:
WZ_Rollo_Links dim 85
WZ_Rollo_Rechts dim 85
.memberList:
WZ_Rollo_Links
WZ_Rollo_Rechts
READINGS:
2020-11-23 12 LastDevice WZ_Rollo_Rechts
2020-11-23 12 LastDevice_Abs WZ_Rollo_Rechts
2020-11-23 12 state dim 85
Attributes:
alexaName Wohnzimmer Rollos
alexaRoom Wohnzimmer
devStateIcon up down s/[0-9]|1\d.* s/[0-9]|2\d.* s/[0-9]|3\d.* s/[0-9]|4\d.* s/[0-9]|5\d.* s/[0-9]|6\d.* s/[0-9]|7\d.* s/[0-9]|8\d.* s/[0-9]|9\d.* s/[0-9]|99\d.*
eventMap on off
genericDeviceType light
group Rollo
homebridgeMapping clear CurrentPosition=position,minValue=0,maxValue=99 TargetPosition=dim
icon fts_shutter_10
room Wohnung,alexa
webCmd dim 20 40 60 80
und dort genericType = LIGHT
jetzt stellt Alexa beide Rollos wieder auf die Gewünschte Position :
Alexa Wohnzimmer Rollos auf 80%
Antwort: ok
Sollte jemand wissen warum die Gruppe Wohnzimmer oder Schlafzimmer -Rollos selbst sich über Alexa app. Gruppen nicht Steuern lässt bitte bescheid geben.
(Vorher ging es auch problemlos über die Alexa app. Gruppen )
Danke