Kann mir jemand erklären warum ValvePosition im Log ankommt, desired-temp aber nicht
DEF 4ED3CB04
FUUID 5c4570df-f33f-0af0-15ac-86a708cb2e6ed14b
NAME DG.Kz.HZ.Thermostat_Clima
NOTIFYDEV global
NR 362
NTFY_ORDER 50-DG.Kz.HZ.Thermostat_Clima
STATE T: 13.7 desired: 14.0 valve: 100
TYPE CUL_HM
chanNo 04
device DG.Kz.HZ.Thermostat
Helper:
DBLOG:
ValvePosition:
MyDBlog:
TIME 1607601781.00845
VALUE 100
READINGS:
2020-12-10 13:00:31 CommandAccepted yes
2019-12-09 11:05:02 R-boostPeriod 5 min
2019-12-09 11:05:02 R-boostPos 80 %
2019-12-09 11:05:02 R-btnNoBckLight off
2019-12-09 11:05:02 R-dayTemp 21 C
2019-12-09 11:05:02 R-daylightSaveTime on
2019-12-09 11:05:02 R-decalcTime 11:00
2019-12-09 11:05:02 R-decalcWeekday Sat
2019-12-09 11:05:02 R-modePrioManu all
2019-12-09 11:05:02 R-modePrioParty all
2019-12-09 11:05:02 R-nightTemp 17 C
2019-12-09 11:05:02 R-noMinMax4Manu off
2019-12-09 11:05:02 R-regAdaptive on
2019-12-09 11:05:02 R-reguExtI 18
2019-12-09 11:05:02 R-reguExtP 33
2019-12-09 11:05:02 R-reguExtPstart 45
2019-12-09 11:05:02 R-reguIntI 16
2019-12-09 11:05:02 R-reguIntP 31
2020-11-25 09:31:30 R-reguIntPstart 33
2019-12-09 11:05:02 R-showInfo time
2019-12-09 11:05:02 R-showWeekday off
2019-04-23 21:45:32 R-sign off
2019-12-09 11:05:02 R-tempMax 30.5 C
2019-12-09 11:05:02 R-tempMin 4.5 C
2019-12-09 11:05:02 R-tempOffset 0.0K
2019-12-09 11:05:02 R-valveErrPos 15 %
2019-12-09 11:05:02 R-valveMaxPos 100 %
2019-12-09 11:05:02 R-valveOffsetRt 0 %
2019-12-09 11:05:02 R-winOpnBoost off
2019-12-09 11:05:02 R-winOpnDetFall 1.4 K
2019-12-09 11:05:02 R-winOpnMode off
2019-12-09 11:05:02 R-winOpnPeriod 15 min
2019-12-09 11:05:02 R-winOpnTempI 12 C
2020-12-10 11:32:09 R_0_tempListSat 24:00 13.0
2020-12-10 11:32:09 R_1_tempListSun 24:00 13.0
2020-12-10 11:32:09 R_2_tempListMon 24:00 13.0
2020-12-10 11:32:09 R_3_tempListTue 24:00 13.0
2020-12-10 11:32:09 R_4_tempListWed 24:00 13.0
2020-12-10 11:32:09 R_5_tempListThu 24:00 13.0
2020-12-10 11:32:09 R_6_tempListFri 24:00 13.0
2020-12-10 11:32:09 R_tempList_State verified
2020-12-10 13:05:17 ValvePosition 100
2020-12-10 13:05:17 boostTime -
2020-12-10 11:32:12 cfgState ok
2020-12-10 13:05:17 controlMode manual
2020-12-10 13:05:17 desired-temp 14.0
2020-12-10 13:05:17 measured-temp 13.7
2020-12-10 13:05:17 partyEnd -
2020-12-10 13:05:17 partyStart -
2020-12-10 13:05:17 partyTemp -
2020-12-10 13:00:31 recentStateType ack
2020-12-10 13:05:17 state T: 13.7 desired: 14.0 valve: 100
2020-08-26 08:59:00 trigLast fhem:81
helper:
peerFriend peerRTteam2
peerIDsRaw ,00000000
peerOpt p:thermostat
regLst 1,7
cmds:
TmplKey :no:1607584481.1265
TmplTs 1607584481.1265
cmdKey 1:0:0::DG.Kz.HZ.Thermostat:0095:04:
cmdLst:
burstXmit noArg
clear [(readings|trigger|register|oldRegs|rssi|msgEvents|{msgErrors}|attack|all)]
controlManu (on|off|5.0..30.0;0.5)
controlMode (auto|manual|boost|day|night)
controlParty -temp- -startDate- -startTime- -endDate- -endTime-
desired-temp (on|off|5.0..30.0;0.5)
getConfig noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6) [-peerChn-]
inhibit [(on|{off})]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerSmart -peerOpt-
regBulk -list-.-peerChn- -addr1:data1- -addr2:data2-...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
sign [(on|{off})]
sysTime noArg
tempListFri [(prep|{exec})] -HH:MM- -temp- [...]
tempListMon [(prep|{exec})] -HH:MM- -temp- [...]
tempListSat [(prep|{exec})] -HH:MM- -temp- [...]
tempListSun [(prep|{exec})] -HH:MM- -temp- [...]
tempListThu [(prep|{exec})] -HH:MM- -temp- [...]
tempListTmpl [({verify}|restore)] [[-file-:]-templateName-]
tempListTue [(prep|{exec})] -HH:MM- -temp- [...]
tempListWed [(prep|{exec})] -HH:MM- -temp- [...]
tempTmplSet -tempTmpl-
tplDel -tplDel-
tplSet_0 -tplChan-
lst:
condition slider,0,1,255
peer
peerOpt DG.Bad.HZ.Thermostat_ClimaTeam,DG.Ga.HZ.Thermostat_ClimaTeam,DG.Sz.HZ.Thermostat_ClimaTeam
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 1
det 1
raw 0
tpl 0
regCollect:
role:
chn 1
shRegR:
07 00
shadowReg:
tmpl:
Attributes:
DbLogExclude .*
DbLogInclude ValvePosition,desired-temp
event-min-interval 900
event-on-change-reading ValvePosition:1,desired-temp:0.5
model HM-CC-RT-DN
peerIDs 00000000,
lass doch mal die Schwelle weg
event-on-change-reading ValvePosition:1,desired-temp:0.5
Wozu ist die hier überhaupt sinnvoll? ist der minimal Schritt nicht sowieso 1 bzw. 0.5?
Zitat von: Otto123 am 10 Dezember 2020, 13:48:34
lass doch mal die Schwelle weg
Hatte ich auch schon versucht, leider kein Unterschied
poste mal bitte noch ein list deines dblog Gerätes.
Danke, das war der entscheidende Hinweis.
Ich habe ja nur bestimmte Werte im define des DBLog.