Nur Text | Text mit Bildern

FHEM Forum

FHEM - Hausautomations-Systeme => Sonstige Systeme => Thema gestartet von: MaVaderXY am 11 Januar 2021, 09:25:14

Titel: Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 11 Januar 2021, 09:25:14
Hallo zusammen,

ich habe im FHEM meinen Signalduino eingebunden und diesen auch auf die neueste FIrmware aktualisiert, sowie auch das FHEM.
Jetzt möchte ich hiermit gerne meine Yooda Funkrolladen steuern. Diese haben nur Handfernbedienungen. Leider wird im Eventmonitor wenn ich nicht nach Whitlist 16 filtere viel aus der Nachbarschaft angezeigt, aber nicht meine Fernbedienungen... :-(

Kann es sein, dass es dann mit meinen Rolläden nicht funktioniert? Hate gelesen das Dooya = Yooda sein soll, aber das Dooya Modul zeigt halt nichts an.

Oder gibt es noch gezielte Sachen auf die ich achten muss? Würde mich freuen wenn ich das irgendwie hinbekomme.

VG
Marcel
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 11 Januar 2021, 21:42:10
Hi Marcel,

Was für einen Signalduino setzt Du denn ein?
Am besten mal ein List von deinem Signalduino Device aus FHEM posten.

Dann solltest Du mal den Signalduino in FHEM temporär auf Verbose 4 stellen und auf deiner FB Tasten drücken.
Dadurch werden vermutlich ein paar Sachen vom Signalduino in das FHEM Logfile geschrieben, welches Du hier posten solltest.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 12 Januar 2021, 08:41:41
Hi Sidey,

erstmal Danke, für deine Antwort.
Auf Verbose 4 habe ich den Signalduino schon gesetzt, aber es werden leider keinerleit Tastendrücke erkannt :-(

Hier mal die Details meine Signalduino, hoffe das du das meintest mit List:

Code Auswählen

CFGFN
Clients
:IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:SIGNALduino_un:
DEF
/dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
DMSG
W44x#272BE064D8D41F9A22
DevState
initialized
DeviceName
/dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
FD
21
FUUID
5ffc5229-f33f-ac42-6956-7fab90c3d53f38d2
IDsNoDispatch
2,72.1,82
ITClock
250
LASTDMSG
W44x#272BE064D8D41F9A22
LASTDMSGID
44.1
MSGCNT
10194
NAME
marcelsduino
NR
280
NR_CMD_LAST_H
3
PARTIAL
RAWMSG
MU;P0=-132;P1=-1934;P2=1973;P3=3916;P4=-5840;P5=-3885;P6=-8224;P7=92;D=1213421212521212525252121252125212525252525212121212121252521212521212525212525212121252521252125212121212125252525252521212525212521212125212121252670;CP=2;R=242;
RSSI
-81
STATE
opened
TIME
1610437079
TYPE
SIGNALduino
cc1101_available
1
sendworking
0
unknownmessages
2021-01-12 08:38:11-MU;P0=-3966;P1=589;P2=-2118;D=01012121012101212121010121012121212121212121210;CP=1;R=239;#2021-01-12 08:38:22-MU;P0=23720;P1=-9090;P2=533;P3=-4098;P4=-2068;P5=-912;D=012324242324242424232324232424242424242424242424232423242324242424232423242421232424232424242423232423242424242424242424242423242324232424242425;CP=2;R=241;#2021-01-12 08:38:23-MU;P0=-3116;P1=538;P2=-2060;P3=-4125;P4=-8991;D=01213121214131212131212121213131213121212121212121212121213121312131212121213121312121413121213121212121313121312121212121212121212121312131213121212121312131212141312121312121212131312131212121212121212121212131213121312121212131213121214131212131212121;CP=1;R=243;O;#2021-01-12 08:38:23-MU;P0=-2053;P1=556;P2=-4604;P3=-9002;P4=132;P5=-1488;D=012121012101010101010101010101012101210121010101012101210101312101012101010101212101210101010101010101010101210121012101010101210121010131245;CP=1;R=244;#2021-01-12 08:38:41-MU;P0=248;P1=-2148;P2=642;P3=-4184;P4=-220;D=012121212123212121212121212121232123212124;CP=2;R=240;#2021-01-12 08:38:41-MU;P0=-224;P1=607;P2=-4177;P3=-2157;P4=-2948;D=01213131213121313131212131213131313131313131312131313131313131313121312131314;CP=1;R=242;#2021-01-12 08:38:51-MU;P0=275;P1=-269;P2=160;P3=-584;P4=636;P5=-207;P6=-4908;P7=-1076;D=012341234141034103030303030303030303454503454503034503034103450627;CP=0;R=240;#2021-01-12 08:38:52-MU;P0=-1312;P1=619;P2=-976;P3=277;P4=-569;P5=-241;D=0121234343434153434153415341534151534153434343435;CP=3;R=241;#2021-01-12 08:38:52-MU;P0=-222;P1=268;P2=-602;P3=643;P4=-4012;P5=404;P6=-2648;D=0121212121230301230301212301212301230141256;CP=1;R=234;#2021-01-12 08:38:52-MU;P0=658;P1=-916;P3=270;P4=-588;P5=-208;P7=-156;D=0101343434340534340534053405340505340534343434343434343434050534050534340534340734053;CP=3;R=241;#2021-01-12 08:38:52-MU;P0=-217;P1=627;P2=-924;P3=286;P4=-577;P5=-328;P6=-6304;D=0123434343415343410341034103410103410343434343434343434341010341010343410343410341036;CP=3;R=242;#2021-01-12 08:38:52-MU;P0=136;P1=260;P2=-588;P3=623;P4=-285;P5=-221;P7=-5836;D=12341234123512353412341212121212121212121235351235351212351212351235170;CP=1;R=241;#2021-01-12 08:38:52-MU;P0=-220;P1=-3656;P2=248;P3=-591;P4=664;P6=-352;P7=512;D=23402323402340234023404023402323232323232323232346702340402323402323402340217;CP=2;R=242;#2021-01-12 08:38:52-MU;P0=-2066;P1=529;P2=-4100;P3=-944;P4=868;P5=-256;D=0101210101010121210121010101010101013451;CP=1;R=242;#2021-01-12 08:38:52-MU;P0=1268;P1=-448;P2=531;P3=-4095;P4=-2079;P5=-9004;P6=-807;P7=934;D=232423242424242324232424252324242676767601;CP=2;R=243;#2021-01-12 08:38:52-MU;P0=246;P1=-599;P2=566;P3=-362;P4=164;P5=376;P6=-254;P7=1468;D=01012341235301262326012601760126010123010;CP=0;R=242;#2021-01-12 08:38:52-MU;P0=591;P1=-255;P2=214;P3=-611;P5=963;P6=-2058;P7=-4102;D=01232151232151235606060606060607060706070606060607060703530;CP=0;R=238;#2021-01-12 08:38:52-MU;P0=92;P1=-329;P2=202;P3=-646;P4=1072;P5=656;P7=-208;D=1234323215323232323512351512351572323210723235;CP=2;R=249;#2021-01-12 08:38:53-MU;P0=180;P1=-880;P2=555;P3=-2047;P4=-4133;P5=-8989;D=01232323232323232323232423242324232323232423242323252423232423232323242423242323232323232323232323242324232423232323242324232325242323242323232324242324232323232323232323232324232423242323232324232423232524232324232323232424232423232323232323232323232423;CP=2;R=239;O;#2021-01-12 08:38:59-MU;P0=-360;P1=1985;P2=-3873;P3=-1923;P4=-10384;D=0121212121313131313131212131312131312121312121313131212131213121313131313121212121212131312121312131313121313131214;CP=1;R=244;#2021-01-12 08:39:11-MU;P0=-928;P1=597;P2=-2142;P3=-4470;D=012121212121213121212121212121212131213121213;CP=1;R=240;#2021-01-12 08:39:22-MU;P0=18132;P1=-8632;P2=531;P3=-4089;P4=-2150;D=012324242324242424232324232424242424242424242424232423242324242424232423242421;CP=2;R=241;#2021-01-12 08:39:22-MU;P0=-176;P1=552;P2=-3894;P3=-2065;P5=112;P6=-780;P7=-8990;D=0121312131313131313131313131312561312131213131313121312131317121313121313131312121312131313131313131313131312131213121313131312131213131712131312;CP=1;R=243;#2021-01-12 08:39:23-MU;P0=-4050;P1=551;P3=-2057;P4=-8980;P5=-1240;D=0101310131313131313131313131310131013101313131310131013131410131310131313131010131013131313131313131313131013101315;CP=1;R=242;#2021-01-12 08:39:23-MU;P0=-2670;P1=546;P2=-2054;P3=-4092;P4=-9000;D=01212121213121312121413121213121212121313121312121212121212121212121312131213121212121312131212141312121312121212131312131212121212121212121212131213121312121212131213121210;CP=1;R=243;
version
V 3.5.0-dev+20201207 SIGNALduino cc1101 (chip CC1101) - compiled at Dec 18 2020 22:34:07
versionProtocols
1.21
versionmodul
v3.4.4
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 12 Januar 2021, 19:03:30
Hi,

Ein List sieht so aus:

Code Auswählen


Internals:
   CFGFN      /opt/fhem/cfg/fhem_1_iodevs.cfg
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:SIGNALduino_un:
   DEF        fhem-pi:45020
   DMSG       W50#FF56052CFF86
   DevState   initialized
   DeviceName fhem-pi:45020@57600
   FD         37
   FUUID      5c4cb3ce-f33f-f610-278a-a59c44ade69befe4
   ITClock    250
   LASTDMSG   W50#FF56052CFF86
   LASTDMSGID 50
   MSGCNT     12666
   NAME       sduino
   NR         95
   NR_CMD_LAST_H 2
   PARTIAL   
   RAWMSG     MU;P0=-2964;P1=525;P2=-964;P3=1367;P4=-12468;D=01212121212123212321232121232323232323212321232321232121232321212121212121212123232323212123412121212121212123212321232121232323232323212321232321232121232321212121212121212123232323212123;CP=1;
   STATE      opened
   TIME       1610474249.46694
   TYPE       SIGNALduino
   sendworking 0
   unknownmessages
   version    V 3.4.0 SIGNALduino  - compiled at Jul 16 2020 20:52:03
   versionProtocols 1.21
   versionmodul v3.4.4
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|20|26|29|30|34|46|68|69|76|81|83|86|90|91|91.1|92|93|95|97|99|104)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79|96|98)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     29:SD_GT   ^P49#[A-Fa-f0-9]+
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2020-06-02 22:51:52   config          MS=1;MU=1;MC=1;Mred=1
     2019-12-24 01:37:48   freeram         1053
     2020-12-25 16:03:22   ping            OK
     2021-01-10 08:47:56   state           opened
     2020-08-01 22:54:51   uptime          6 01:34:37
     2020-05-10 11:03:25   version         V 3.3.1 SIGNALduino  - compiled at Dec  3 2019 19:41:05
   XMIT_TIME:
     1610466079.14044
     1610466081.1526
   additionalSets:
   keepalive:
     ok         0
     retry      0
   mcIdList:
     10
     11
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     2
     3
     4
     17
   muIdList:
     5
     8
     17.1
     50
     76
Attributes:
   flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
   hardware   nano328
   longids    0
   rawmsgEvent 0
   room       system
   verbose    3
   whitelist_IDs 0,0.1,0.2,0.3,0.4,2,3,4,5,8,10,11,17,17.1,50,76


Du hast nur die internal gesendet.
Zumindest aus denen geht hervor, dass etwas empfangen wurde.
Ein Logfile würde hier aber sicher Aufschluss geben, ebenso das List vom signalduino. :)

Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 12 Januar 2021, 21:39:43
Ahhhh okay :)

Hier die List von meinem signalduino
Code Auswählen


Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:SIGNALduino_un:
   DEF        /dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
   DMSG       W44x#132BE06CECD41F931C
   DevState   initialized
   DeviceName /dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
   FD         21
   FUUID      5ffc5229-f33f-ac42-6956-7fab90c3d53f38d2
   ITClock    250
   LASTDMSG   W44x#132BE06CECD41F931C
   LASTDMSGID 44.1
   MSGCNT     869
   NAME       marcelsduino
   NR         59
   NR_CMD_LAST_H 8
   PARTIAL   
   RAWMSG     MU;P0=1970;P1=-1940;P2=3912;P3=-5848;P4=-3889;P5=-19800;D=010123010101040101040401010401040104040404040101010101010404010404010104040401040401010404010401040101010101040404040404010104010104040101010404040105;CP=0;R=242;
   RSSI       -81
   STATE      opened
   TIME       1610456099
   TYPE       SIGNALduino
   cc1101_available 1
   sendworking 0
   version    V 3.5.0-dev+20201207 SIGNALduino cc1101 (chip CC1101) - compiled at Dec 18 2020 22:34:07
   versionProtocols 1.21
   versionmodul v3.4.4
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|20|26|29|30|34|46|68|69|76|81|83|86|90|91|91.1|92|93|95|97|99|104)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79|96|98)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     29:SD_GT   ^P49#[A-Fa-f0-9]+
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2021-01-12 12:34:47   cc1101_config   Freq: 433.920 MHz, Bandwidth: 325 KHz, rAmpl: 42 dB, sens: 8 dB, DataRate: 5603.79 Baud
     2021-01-12 12:34:47   cc1101_config_ext Modulation: ASK/OOK, Syncmod: No preamble/sync
     2021-01-12 12:29:28   cc1101_patable  C3E = 00 84 00 00 00 00 00 00 => 5_dBm
     2021-01-12 12:31:49   ping            OK
     2021-01-12 12:29:26   state           opened
   XMIT_TIME:
     1610451222
     1610451254
     1610451371
     1610451381
     1610451493
     1610451499
     1610451518
     1610451672
   additionalSets:
   keepalive:
     ok         1
     retry      0
   mcIdList:
   msIdList:
   muIdList:
     16
Attributes:
   cc1101_frequency 433.92
   verbose    4
   whitelist_IDs 16



Danke dir für deine Hilfe :)
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 15 Januar 2021, 10:22:10
Hallo nochmal zusammen,

ich hatte noch eine Frage - da mir am signalduino im eventlog beim drücken meiner FB leider gar nichts angezeigt wird, kann es sein, dass die FB Rolling Codes verwendet, oder müsste dennoch zumindest irgendwas angezeigt werden?
Andere Geräte aus der Nachbarschaft werden angezeigt, hatte auch kürzlich einen Braodlink zum ausprobieren, dieser hat die Codes der FB gelesen aber keine Aktion ausgeführt. Daraufhin wurde im Signalduino Somy angelegt - was ja heißt das er liest...

Wie ist eure Einschätzung hier, habe ich verloren?  ;D :( :(
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 15 Januar 2021, 20:08:09
Zitat von: MaVaderXY am 15 Januar 2021, 10:22:10

ich hatte noch eine Frage - da mir am signalduino im eventlog beim drücken meiner FB leider gar nichts angezeigt wird, kann es sein, dass die FB Rolling Codes verwendet, oder müsste dennoch zumindest irgendwas angezeigt werden?

Der Signalduino erzeugt keine Events von erzeugten Signalen. Wenn Du das benötigst, musst Du es explizit einschalten.

Ohne die Angefragten Beistellleistungrn wird dir aber niemand helfen können, da einfach zu wenig Daten bekannt sind.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 15 Januar 2021, 20:44:54
Zitat von: Sidey am 15 Januar 2021, 20:08:09
Der Signalduino erzeugt keine Events von erzeugten Signalen. Wenn Du das benötigst, musst Du es explizit einschalten.

Ohne die Angefragten Beistellleistungrn wird dir aber niemand helfen können, da einfach zu wenig Daten bekannt sind.

Grüße Sidey

Kannst du mir sagen was genau du meinst?
Die List hatte ich ja gepostet, oder ist das immer noch falsch?

Bin noch recht neu und kenn mich nicht so mega gut aus, ihr kriegt alles was ihr braucht  :o

Habe ich das auch richtig verstanden, das das drucken auf der Fernbedienung nicht angezeigt wird? Wie stelle ich das denn explizit ein?
Sorry für die Vielen fragen, kenn mich leider noch zu wenig aus :-(
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 15 Januar 2021, 23:02:49
Zitat von: MaVaderXY am 15 Januar 2021, 20:44:54
Kannst du mir sagen was genau du meinst?

Klar, kann ich. Ich habe bereits zwei mal nach einem Logfile gefragt:

Zitat von: Sidey am 11 Januar 2021, 21:42:10
Dann solltest Du mal den Signalduino in FHEM temporär auf Verbose 4 stellen und auf deiner FB Tasten drücken.
Dadurch werden vermutlich ein paar Sachen vom Signalduino in das FHEM Logfile geschrieben, welches Du hier posten solltest.

und

Zitat von: Sidey am 12 Januar 2021, 19:03:30
Ein Logfile würde hier aber sicher Aufschluss geben, ebenso das List vom signalduino. :)


Zitat von: MaVaderXY am 15 Januar 2021, 20:44:54
Habe ich das auch richtig verstanden, das das drucken auf der Fernbedienung nicht angezeigt wird? Wie stelle ich das denn explizit ein?

Das ist nicht ganz richtig. Für die empfangenen Daten wird kein Ereignis erzeugt und diese kannst Du nicht im Ereignismonitor sehen.
Die Daten werdern allerdings ab Verbose 4 in das FHEM Logfile geschrieben und sind dort auch zu sehen.

Events könnten über das Attribut
Code Auswählen
rawmsgEvent eingeschaltet werden, das ersetzt allerdings nicht die Notwendigkeit des Logfiles für eine weitere Unterstützung.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 16 Januar 2021, 12:21:44
Ahhh sorry, mein Fehler - ich bin davon ausgegangen das im eventmonitor das Gleiche geloogt wird wie im LogFile.

Hier mein Logfile von eben 12.06 Uhr bis 12.09 Uhr - hier habe ich mehrmals die Ferbedienung betätigt, auch mal länger den knopf gedrückt und festgehalten.

Code Auswählen

2021.01.16 12:05:08 4: marcelsduino: Read, msg READredu: MU;P0=-21752;P1=1965;P2=-1923;P3=3904;P4=-5860;P5=-3893;D=012123412121212121212151212151515121515151515121212121212121212121515121515151515151512151512121212;CP=1;R=234;
2021.01.16 12:05:08 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 44.1 -> BresserTemeo matches, trying to demodulate
2021.01.16 12:05:09 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 12:05:14 4: marcelsduino: Read, msg READredu: MU;P0=260;P1=1004;P2=-974;P3=551;P4=-8016;P5=-1793;P6=-4116;D=12121212343536363535363635353535363536350;CP=3;R=221;
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 42 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:05:14 4: marcelsduino: Read, msg READredu: MU;P0=568;P1=-1838;P2=-4149;P3=-352;D=0101020102010201020101020201020102010103;CP=0;R=221;
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 12:05:14 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 12:05:44 4: marcelsduino: Read, msg: MC;LL=-1009;LH=957;SL=-494;SH=473;D=00575D9;C=488;L=28;R=215;
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50554
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50555
2021.01.16 12:06:02 5: GET /fhem?room=all HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Upgrade-Insecure-Requests: 1
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
Referer: http://192.168.178.146:8083/fhem
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50555 GET /fhem?room=all; BUFLEN:0
2021.01.16 12:06:02 4: Dooya_Set: Called
2021.01.16 12:06:02 4: Dooya_InternalSet call send Rollo_Master Dooya Rollo_Master
2021.01.16 12:06:02 4: WEB: /fhem?room=all / RL:7218 / text/html; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 5: GET /fhem/pgm2/svg.js HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive

User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
If-None-Match: "1610225570"
2021.01.16 12:06:02 4: WEB_192.168.178.53_50555 GET /fhem/pgm2/svg.js; BUFLEN:0
2021.01.16 12:06:02 4: WEB_192.168.178.53_50555 => 304 Not Modified
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_AURIOL_150&logdev=FileLog_AURIOL_150&gplotfile=SVG_AURIOL_150&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0

Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50555 POST /fhem/SVG_showLog?dev=SVG_AURIOL_150&logdev=FileLog_AURIOL_150&gplotfile=SVG_AURIOL_150&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50557
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_Auriol_IAN_110&logdev=FileLog_Auriol_IAN_110&gplotfile=SVG_Auriol_IAN_110&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0

Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50554 POST /fhem/SVG_showLog?dev=SVG_Auriol_IAN_110&logdev=FileLog_Auriol_IAN_110&gplotfile=SVG_Auriol_IAN_110&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: plotcommand: get FileLog_AURIOL_150 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_AURIOL_150 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_AURIOL_150 get: Input file ./log/AURIOL_150-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_BresserTemeo_1&logdev=FileLog_BresserTemeo_1&gplotfile=SVG_BresserTemeo_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0

Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: FileLog_AURIOL_150 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_AURIOL_150 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 4: WEB_192.168.178.53_50557 POST /fhem/SVG_showLog?dev=SVG_BresserTemeo_1&logdev=FileLog_BresserTemeo_1&gplotfile=SVG_BresserTemeo_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: Cmd: >{ "AURIOL_150-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "AURIOL_150 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 5: plotcommand: get FileLog_Auriol_IAN_110 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_Auriol_IAN_110 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_Auriol_IAN_110 get: Input file ./log/Auriol_IAN_110-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50558
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50559
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_Prologue_144&logdev=FileLog_Prologue_144&gplotfile=SVG_Prologue_144&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0

Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50558 POST /fhem/SVG_showLog?dev=SVG_Prologue_144&logdev=FileLog_Prologue_144&gplotfile=SVG_Prologue_144&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_AURIOL_150&logdev=FileLog_AURIOL_150&gplotfile=SVG_AURIOL_150&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2825 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 5: plotcommand: get FileLog_BresserTemeo_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 4: FileLog_Auriol_IAN_110 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_Auriol_IAN_110 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 5: Cmd: >get FileLog_BresserTemeo_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 5: Cmd: >{ "Auriol_IAN_110-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "Auriol_IAN_110 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: FileLog_BresserTemeo_1 get: Input file ./log/BresserTemeo_1-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_GT_WT_02_156&logdev=FileLog_GT_WT_02_156&gplotfile=SVG_GT_WT_02_156&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50559 POST /fhem/SVG_showLog?dev=SVG_GT_WT_02_156&logdev=FileLog_GT_WT_02_156&gplotfile=SVG_GT_WT_02_156&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_Auriol_IAN_110&logdev=FileLog_Auriol_IAN_110&gplotfile=SVG_Auriol_IAN_110&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 5: plotcommand: get FileLog_Prologue_144 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50560
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_PFR_130_44&logdev=FileLog_PFR_130_44&gplotfile=SVG_PFR_130_44&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50560 POST /fhem/SVG_showLog?dev=SVG_PFR_130_44&logdev=FileLog_PFR_130_44&gplotfile=SVG_PFR_130_44&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: Cmd: >get FileLog_Prologue_144 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_Prologue_144 get: Input file ./log/Prologue_144-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 5: plotcommand: get FileLog_GT_WT_02_156 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_GT_WT_02_156 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50561
2021.01.16 12:06:02 4: FileLog_GT_WT_02_156 get: Input file ./log/GT_WT_02_156-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS37_TH_1&logdev=FileLog_SD_WS37_TH_1&gplotfile=SVG_SD_WS37_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50561 POST /fhem/SVG_showLog?dev=SVG_SD_WS37_TH_1&logdev=FileLog_SD_WS37_TH_1&gplotfile=SVG_SD_WS37_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 4: FileLog_BresserTemeo_1 get: line 1, regexp:temperature, col:3, output lines:150
2021.01.16 12:06:02 4: FileLog_Prologue_144 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_Prologue_144 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_BresserTemeo_1 get: line 2, regexp:humidity, col:3, output lines:130
2021.01.16 12:06:02 5: Cmd: >{ "Prologue_144-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "BresserTemeo_1-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "Prologue_144 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 5: Cmd: >{ "BresserTemeo_1 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50562
2021.01.16 12:06:02 4: FileLog_GT_WT_02_156 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 5: GET /fhem?XHR=1&inform=type=status;filter=room=all;since=1610795161;fmt=JSON&fw_id=502&timestamp=1610795162753 HTTP/1.1
Host: 192.168.178.146:8083
Connection: Upgrade
Pragma: no-cache
Cache-Control: no-cache
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Upgrade: websocket
Origin: http://192.168.178.146:8083
Sec-WebSocket-Version: 13
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
Sec-WebSocket-Key: lbrjOHmLQJ8/HCeiBoKdKQ==
Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits
2021.01.16 12:06:02 4: FileLog_GT_WT_02_156 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 5: Cmd: >{ "GT_WT_02_156-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "GT_WT_02_156 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 5: plotcommand: get FileLog_PFR_130_44 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_PFR_130_44 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_PFR_130_44 get: Input file ./log/PFR_130_44-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_Prologue_144&logdev=FileLog_Prologue_144&gplotfile=SVG_Prologue_144&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2825 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50563
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_2&logdev=FileLog_SD_WS_58_TH_2&gplotfile=SVG_SD_WS_58_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: FileLog_PFR_130_44 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_PFR_130_44 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 4: WEB_192.168.178.53_50563 POST /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_2&logdev=FileLog_SD_WS_58_TH_2&gplotfile=SVG_SD_WS_58_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: Cmd: >{ "PFR_130_44-2021.log" }<
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_GT_WT_02_156&logdev=FileLog_GT_WT_02_156&gplotfile=SVG_GT_WT_02_156&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2827 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 5: Cmd: >{ "PFR_130_44 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_BresserTemeo_1&logdev=FileLog_BresserTemeo_1&gplotfile=SVG_BresserTemeo_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:3716 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 5: plotcommand: get FileLog_SD_WS37_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_SD_WS37_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_SD_WS37_TH_1 get: Input file ./log/SD_WS37_TH_1-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50564
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_1&logdev=FileLog_SD_WS_89_TH_1&gplotfile=SVG_SD_WS_89_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_PFR_130_44&logdev=FileLog_PFR_130_44&gplotfile=SVG_PFR_130_44&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2824 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 4: FileLog_SD_WS37_TH_1 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 5: plotcommand: get FileLog_SD_WS_58_TH_2 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 4: FileLog_SD_WS37_TH_1 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 5: Cmd: >get FileLog_SD_WS_58_TH_2 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_SD_WS_58_TH_2 get: Input file ./log/SD_WS_58_TH_2-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: WEB_192.168.178.53_50564 POST /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_1&logdev=FileLog_SD_WS_89_TH_1&gplotfile=SVG_SD_WS_89_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS37_TH_1-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS37_TH_1 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: FileLog_SD_WS_58_TH_2 get: line 1, regexp:temperature, col:3, output lines:19
2021.01.16 12:06:02 4: FileLog_SD_WS_58_TH_2 get: line 2, regexp:humidity, col:3, output lines:17
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_58_TH_2-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_58_TH_2 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50565
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_2&logdev=FileLog_SD_WS_89_TH_2&gplotfile=SVG_SD_WS_89_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS37_TH_1&logdev=FileLog_SD_WS37_TH_1&gplotfile=SVG_SD_WS37_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2827 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 4: WEB_192.168.178.53_50565 POST /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_2&logdev=FileLog_SD_WS_89_TH_2&gplotfile=SVG_SD_WS_89_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_2&logdev=FileLog_SD_WS_58_TH_2&gplotfile=SVG_SD_WS_58_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:3057 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50566
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_TCM97..._15&logdev=FileLog_TCM97..._15&gplotfile=SVG_TCM97..._15&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: WEB_192.168.178.53_50566 POST /fhem/SVG_showLog?dev=SVG_TCM97..._15&logdev=FileLog_TCM97..._15&gplotfile=SVG_TCM97..._15&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:02 5: plotcommand: get FileLog_SD_WS_89_TH_2 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: plotcommand: get FileLog_SD_WS_89_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:02 5: Cmd: >get FileLog_SD_WS_89_TH_2 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 5: Cmd: >get FileLog_SD_WS_89_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_2 get: Input file ./log/SD_WS_89_TH_2-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: Connection accepted from WEB_192.168.178.53_50567
2021.01.16 12:06:02 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_51_TH_1&logdev=FileLog_SD_WS_51_TH_1&gplotfile=SVG_SD_WS_51_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_1 get: Input file ./log/SD_WS_89_TH_1-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_2 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_2 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_1 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:02 4: FileLog_SD_WS_89_TH_1 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_89_TH_2-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_89_TH_1-2021.log" }<
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_89_TH_2 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 5: Cmd: >{ "SD_WS_89_TH_1 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:02 4: WEB_192.168.178.53_50567 POST /fhem/SVG_showLog?dev=SVG_SD_WS_51_TH_1&logdev=FileLog_SD_WS_51_TH_1&gplotfile=SVG_SD_WS_51_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_2&logdev=FileLog_SD_WS_89_TH_2&gplotfile=SVG_SD_WS_89_TH_2&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 5: plotcommand: get FileLog_TCM97..._15 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 4: Connection accepted from WEB_192.168.178.53_50568
2021.01.16 12:06:03 5: Cmd: >get FileLog_TCM97..._15 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_89_TH_1&logdev=FileLog_SD_WS_89_TH_1&gplotfile=SVG_SD_WS_89_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 4: Connection accepted from WEB_192.168.178.53_50569
2021.01.16 12:06:03 4: FileLog_TCM97..._15 get: Input file ./log/TCM97..._15-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_3&logdev=FileLog_SD_WS_84_TH_3&gplotfile=SVG_SD_WS_84_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:03 4: WEB_192.168.178.53_50568 POST /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_3&logdev=FileLog_SD_WS_84_TH_3&gplotfile=SVG_SD_WS_84_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:03 4: FileLog_TCM97..._15 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:03 4: FileLog_TCM97..._15 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:03 5: Cmd: >{ "TCM97..._15-2021.log" }<
2021.01.16 12:06:03 5: Cmd: >{ "TCM97..._15 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 5: POST /fhem/SVG_showLog?dev=SVG_Prologue_148&logdev=FileLog_Prologue_148&gplotfile=SVG_Prologue_148&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:03 4: WEB_192.168.178.53_50569 POST /fhem/SVG_showLog?dev=SVG_Prologue_148&logdev=FileLog_Prologue_148&gplotfile=SVG_Prologue_148&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_TCM97..._15&logdev=FileLog_TCM97..._15&gplotfile=SVG_TCM97..._15&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2824 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 5: plotcommand: get FileLog_SD_WS_51_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 4: Connection accepted from WEB_192.168.178.53_50570
2021.01.16 12:06:03 5: Cmd: >get FileLog_SD_WS_51_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_1&logdev=FileLog_SD_WS_84_TH_1&gplotfile=SVG_SD_WS_84_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:03 4: FileLog_SD_WS_51_TH_1 get: Input file ./log/SD_WS_51_TH_1-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 4: WEB_192.168.178.53_50570 POST /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_1&logdev=FileLog_SD_WS_84_TH_1&gplotfile=SVG_SD_WS_84_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:03 5: plotcommand: get FileLog_SD_WS_84_TH_3 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 5: Cmd: >get FileLog_SD_WS_84_TH_3 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_3 get: Input file ./log/SD_WS_84_TH_3-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 4: FileLog_SD_WS_51_TH_1 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:03 4: FileLog_SD_WS_51_TH_1 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_51_TH_1-2021.log" }<
2021.01.16 12:06:03 5: plotcommand: get FileLog_SD_WS_84_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_51_TH_1 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 5: Cmd: >get FileLog_SD_WS_84_TH_1 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_3 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_3 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_1 get: Input file ./log/SD_WS_84_TH_1-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 5: plotcommand: get FileLog_Prologue_148 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 5: Cmd: >get FileLog_Prologue_148 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 4: Connection accepted from WEB_192.168.178.53_50571
2021.01.16 12:06:03 5: POST /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_3&logdev=FileLog_SD_WS_58_TH_3&gplotfile=SVG_SD_WS_58_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 0
Accept: text/plain, */*; q=0.01
cache-control: no-cache
X-Requested-With: XMLHttpRequest
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Origin: http://192.168.178.146:8083
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:03 4: FileLog_Prologue_148 get: Input file ./log/Prologue_148-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 4: WEB_192.168.178.53_50571 POST /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_3&logdev=FileLog_SD_WS_58_TH_3&gplotfile=SVG_SD_WS_58_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502; BUFLEN:0
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_1 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:03 4: FileLog_SD_WS_84_TH_1 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_84_TH_1-2021.log" }<
2021.01.16 12:06:03 4: FileLog_Prologue_148 get: line 1, regexp:temperature, col:3, output lines:0
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_84_TH_3-2021.log" }<
2021.01.16 12:06:03 4: FileLog_Prologue_148 get: line 2, regexp:humidity, col:3, output lines:0
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_84_TH_1 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_84_TH_3 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 5: Cmd: >{ "Prologue_148-2021.log" }<
2021.01.16 12:06:03 5: Cmd: >{ "Prologue_148 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_3&logdev=FileLog_SD_WS_84_TH_3&gplotfile=SVG_SD_WS_84_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_51_TH_1&logdev=FileLog_SD_WS_51_TH_1&gplotfile=SVG_SD_WS_51_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_84_TH_1&logdev=FileLog_SD_WS_84_TH_1&gplotfile=SVG_SD_WS_84_TH_1&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2828 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_Prologue_148&logdev=FileLog_Prologue_148&gplotfile=SVG_Prologue_148&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:2824 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:03 5: plotcommand: get FileLog_SD_WS_58_TH_3 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59  4:temperature:10: 4:humidity:50:
2021.01.16 12:06:03 5: Cmd: >get FileLog_SD_WS_58_TH_3 CURRENT INT 2021-01-16_00:00:00 2021-01-16_23:59:59 4:temperature:10: 4:humidity:50:<
2021.01.16 12:06:03 4: FileLog_SD_WS_58_TH_3 get: Input file ./log/SD_WS_58_TH_3-2021.log, from:2021-01-16_00:00:00  to:2021-01-16_23:59:59
2021.01.16 12:06:03 4: FileLog_SD_WS_58_TH_3 get: line 1, regexp:temperature, col:3, output lines:13
2021.01.16 12:06:03 4: FileLog_SD_WS_58_TH_3 get: line 2, regexp:humidity, col:3, output lines:12
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_58_TH_3-2021.log" }<
2021.01.16 12:06:03 5: Cmd: >{ "SD_WS_58_TH_3 Min $data{min1}, Max $data{max1}, Last $data{currval1}" }<
2021.01.16 12:06:03 4: WEB: /fhem/SVG_showLog?dev=SVG_SD_WS_58_TH_3&logdev=FileLog_SD_WS_58_TH_3&gplotfile=SVG_SD_WS_58_TH_3&logfile=CURRENT&pos=&fwcsrf=csrf_152578095482938&fw_id=502 / RL:3025 / image/svg+xml / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:06 4: Connection accepted from WEB_192.168.178.53_50578
2021.01.16 12:06:06 5: GET /fhem?detail=marcelsduino HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Upgrade-Insecure-Requests: 1
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
Referer: http://192.168.178.146:8083/fhem?room=all
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:06 4: WEB_192.168.178.53_50578 GET /fhem?detail=marcelsduino; BUFLEN:0
2021.01.16 12:06:07 4: WEB: /fhem?detail=marcelsduino / RL:5625 / text/html; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:07 4: Connection accepted from WEB_192.168.178.53_50579
2021.01.16 12:06:07 5: GET /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:07 4: WEB_192.168.178.53_50578 GET /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938; BUFLEN:0
2021.01.16 12:06:07 5: Cmd: >{ReadingsVal("marcelsduino","cc1101_bWidth","")}<
2021.01.16 12:06:07 4: WEB: /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 / RL:21 / text/plain; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:07 5: GET /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:07 4: WEB_192.168.178.53_50579 GET /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938; BUFLEN:0
2021.01.16 12:06:07 5: Cmd: >{AttrVal("marcelsduino","room","")}<
2021.01.16 12:06:07 4: WEB: /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 / RL:21 / text/plain; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:07 4: Connection accepted from WEB_192.168.178.53_50580
2021.01.16 12:06:07 5: GET /fhem?XHR=1&inform=type=status;filter=marcelsduino;since=1610795165;fmt=JSON&fw_id=518&timestamp=1610795167169 HTTP/1.1
Host: 192.168.178.146:8083
Connection: Upgrade
Pragma: no-cache
Cache-Control: no-cache
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Upgrade: websocket
Origin: http://192.168.178.146:8083
Sec-WebSocket-Version: 13
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
Sec-WebSocket-Key: 4HdBzt+tAvTn9+W9IGEH+Q==
Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits
2021.01.16 12:06:08 4: marcelsduino: Read, msg READredu: MU;P0=-824;P1=1961;P2=-3667;P3=-1953;D=0121313131313131313131312121312121212121212131212;CP=1;R=234;
2021.01.16 12:06:09 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 12:06:11 5: POST /fhem HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Content-Length: 161
Cache-Control: max-age=0
Upgrade-Insecure-Requests: 1
Origin: http://192.168.178.146:8083
Content-Type: application/x-www-form-urlencoded
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:11 4: WEB_192.168.178.53_50579 POST /fhem&detail=marcelsduino&dev.setmarcelsduino=marcelsduino&fwcsrf=csrf_152578095482938&cmd.setmarcelsduino=set&arg.setmarcelsduino=cc1101_bWidth&val.setmarcelsduino=58; BUFLEN:0
2021.01.16 12:06:11 5: Cmd: >set marcelsduino cc1101_bWidth 58<
2021.01.16 12:06:11 3: marcelsduino: Set_bWidth, Request register 10
2021.01.16 12:06:11 5: Starting notify loop for marcelsduino, 1 event(s), first is cc1101_bWidth 58
2021.01.16 12:06:11 5: createNotifyHash
2021.01.16 12:06:11 5: End notify loop for marcelsduino
2021.01.16 12:06:11 5: GET /fhem?detail=marcelsduino&fw_id= HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
Cache-Control: max-age=0
Upgrade-Insecure-Requests: 1
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:11 4: WEB_192.168.178.53_50579 GET /fhem?detail=marcelsduino&fw_id=; BUFLEN:0
2021.01.16 12:06:11 4: WEB: /fhem?detail=marcelsduino&fw_id= / RL:5625 / text/html; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:11 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:11 4: marcelsduino: SendFromQueue, called
2021.01.16 12:06:11 4: marcelsduino: Read, msg: C10 = E7
2021.01.16 12:06:11 3: marcelsduino: Set_bWidth, bWidth: Setting MDMCFG4 (10) to f7 = 58 KHz
2021.01.16 12:06:11 5: GET /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino&fw_id=
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:11 4: WEB_192.168.178.53_50578 GET /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938; BUFLEN:0
2021.01.16 12:06:11 5: Cmd: >{AttrVal("marcelsduino","room","")}<
2021.01.16 12:06:11 4: WEB: /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22room%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 / RL:21 / text/plain; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:11 5: GET /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino&fw_id=
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
2021.01.16 12:06:11 4: WEB_192.168.178.53_50579 GET /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938; BUFLEN:0
2021.01.16 12:06:11 5: Cmd: >{ReadingsVal("marcelsduino","cc1101_bWidth","")}<
2021.01.16 12:06:11 4: WEB: /fhem?cmd=%7BReadingsVal(%22marcelsduino%22%2C%22cc1101_bWidth%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 / RL:21 / text/plain; charset=UTF-8 / Content-Encoding: gzip
/ Cache-Control: no-cache, no-store, must-revalidate

2021.01.16 12:06:11 4: Connection accepted from WEB_192.168.178.53_50582
2021.01.16 12:06:11 5: GET /fhem?XHR=1&inform=type=status;filter=marcelsduino;since=1610795170;fmt=JSON&fw_id=519&timestamp=1610795171957 HTTP/1.1
Host: 192.168.178.146:8083
Connection: Upgrade
Pragma: no-cache
Cache-Control: no-cache
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Upgrade: websocket
Origin: http://192.168.178.146:8083
Sec-WebSocket-Version: 13
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
Sec-WebSocket-Key: MBAKZ2ZYPjE0zhT04vZMfw==
Sec-WebSocket-Extensions: permessage-deflate; client_max_window_bits
2021.01.16 12:06:12 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:12 4: marcelsduino: SendFromQueue, called
2021.01.16 12:06:12 4: marcelsduino: Read, msg: W12F7
2021.01.16 12:06:12 4: marcelsduino: Read, msg: W2356
2021.01.16 12:06:12 4: marcelsduino: Read, msg: W0547
2021.01.16 12:06:12 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:12 4: marcelsduino: SendFromQueue, called
2021.01.16 12:06:12 4: marcelsduino: Read, msg: cmdStrobeReg 36 chipStatus 01 delay1 00
2021.01.16 12:06:12 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:12 4: marcelsduino: SendFromQueue, called
2021.01.16 12:06:12 4: marcelsduino: Read, msg: cmdStrobeReg 34 chipStatus 00 delay1 01
2021.01.16 12:06:13 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:13 4: marcelsduino: SendFromQueue, called
2021.01.16 12:06:13 4: marcelsduino: Read, msg: C0Dn11=10B071F7C43023B900070018146C070091
2021.01.16 12:06:13 5: Starting notify loop for marcelsduino, 2 event(s), first is cc1101_config: Freq: 433.920 MHz, Bandwidth: 58 KHz, rAmpl: 42 dB, sens: 8 dB, DataRate: 5603.79 Baud
2021.01.16 12:06:13 5: createNotifyHash
2021.01.16 12:06:13 5: End notify loop for marcelsduino
2021.01.16 12:06:13 4: marcelsduino: HandleWriteQueue, called
2021.01.16 12:06:13 4: marcelsduino: HandleWriteQueue, nothing to send, stopping timer
2021.01.16 12:06:27 4: marcelsduino: Read, msg READredu: MU;P0=-1294;P1=562;P2=-1883;P3=-4133;P4=112;P5=-368;P6=-2468;D=012131213121312121045131213121212131212131216;CP=1;R=223;
2021.01.16 12:06:27 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:06:27 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 79 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:06:27 4: marcelsduino: Read, msg READredu: MU;P0=-1955;P1=547;P2=-4116;D=0101012121012101210101210101012101210121010;CP=1;R=233;
2021.01.16 12:06:27 4: marcelsduino: Read, msg READredu: MU;P0=-1860;P1=552;P2=-4131;P4=-886;P5=114;P6=-2944;D=121210145610121010121010101210121454121012101210101012101210;CP=1;R=221;
2021.01.16 12:06:27 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:06:39 4: marcelsduino: Read, msg READredu: MU;P0=-1272;P1=536;P2=-1888;P3=-4120;P4=-200;D=0121212121212121312121312131312121212131212131212121212121214;CP=1;R=209;
2021.01.16 12:06:39 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 12:06:39 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 12:06:39 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 12:07:08 4: marcelsduino: Read, msg READredu: MU;P0=-512;P1=1964;P2=-1848;P3=-3904;D=01212121212121213121213131312131313131312121212121212121212;CP=1;R=231;
2021.01.16 12:07:09 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 12:07:48 4: marcelsduino: Read, msg READredu: MU;P0=-907;P1=536;P2=-4083;P3=-1995;P4=-16016;P5=983;P6=-7920;P7=92;D=01213121313131313131313121313121312121313131312131312131313131313131214505050501613121213121212131213131313131313107012131313;CP=1;R=224;
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 42 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 81 -> SA-434-1 matches, trying to demodulate
2021.01.16 12:07:48 4: marcelsduino: Read, msg READredu: MU;P0=-1908;P1=555;P3=-4103;P4=-8768;D=010131013131010101013101013101010101010101314;CP=1;R=217;
2021.01.16 12:07:49 4: marcelsduino: Read, msg READredu: MU;P0=-1842;P1=535;P2=-4124;D=012121012101010101010101012101012101212101010;CP=1;R=220;
2021.01.16 12:07:59 4: Closing inactive connection WEB_192.168.178.53_50579
2021.01.16 12:07:59 4: Closing inactive connection WEB_192.168.178.53_50578
2021.01.16 12:08:08 4: marcelsduino: Read, msg READredu: MU;P0=-17932;P1=1958;P2=-1957;P3=-3901;P4=3912;P5=-5844;P6=-27124;D=0121345121212121212121312121313131213131313131212121212121212121213131213131313131313121313121212131212121212131313131313131313131212131313131212131316;CP=1;R=234;
2021.01.16 12:08:08 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 44.1 -> BresserTemeo matches, trying to demodulate
2021.01.16 12:08:08 4: marcelsduino: Parse_MU, Decoded matched MU protocol id 44.1 dmsg W44x#013BE006FEC41FF9E6 length 72 dispatch(1/4) RSSI = -85
2021.01.16 12:08:08 4: marcelsduino: SD_WS_Parse protocol 44x, rawData 013BE006FEC41FF9E6
2021.01.16 12:08:08 4: marcelsduino: SD_WS_Parse BresserTemeo Humidity > 79  Flag
2021.01.16 12:08:08 4: marcelsduino: SD_WS_Parse BresserTemeo new bin 1000000010011101111100000000001101111111011000100000111111111100111100110
2021.01.16 12:08:08 4: marcelsduino: SD_WS_Parse model=BresserTemeo, temp=-0.3, hum=80, channel=1, id=5F, bat=ok
2021.01.16 12:08:08 4: marcelsduino: BresserTemeo_1 old temp -0.3, age 240, new temp -0.3, diff temp 0.0
2021.01.16 12:08:08 4: marcelsduino: BresserTemeo_1 max difference temperature 5.0 K
2021.01.16 12:08:08 4: marcelsduino: BresserTemeo_1 old hum 80, age 240, new hum 80, diff hum 0.0
2021.01.16 12:08:08 4: marcelsduino: BresserTemeo_1 max difference humidity 6 %
2021.01.16 12:08:08 4: marcelsduino: SD_WS_Parse BresserTemeo_1 (013BE006FEC41FF9E6)
2021.01.16 12:08:08 5: Starting notify loop for BresserTemeo_1, 3 event(s), first is T: -0.3 H: 80
2021.01.16 12:08:08 5: End notify loop for BresserTemeo_1
2021.01.16 12:08:09 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 12:08:52 4: marcelsduino: Read, msg READredu: MU;P0=-4099;P1=547;P2=-1903;P3=-16052;P4=1013;P5=-976;P6=-8012;P7=-196;D=0121212101210121212101212101213454545451612101017;CP=1;R=218;
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 42 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 12:08:52 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 81 -> SA-434-1 matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Read, msg READredu: MU;P0=-716;P1=530;P2=-4125;P3=-1977;D=01213131213131312131213121312131213131313;CP=1;R=225;
2021.01.16 12:08:53 4: marcelsduino: Read, msg READredu: MU;P0=-932;P1=538;P2=-4117;P3=-1896;P4=-16020;P5=1021;P6=-8032;D=0121313131213121313131213131213145050505016131210;CP=1;R=224;
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 42 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:08:53 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 81 -> SA-434-1 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Read, msg READredu: MU;P0=-17436;P1=204;P2=-1077;P3=977;P4=535;P5=-7928;P6=-1895;P7=-4129;D=0123232324546474746474747464746464646464646464746464746474746464642;CP=4;R=224;
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Read, msg READredu: MU;P0=-945;P1=542;P2=-4062;P3=-1925;P4=-16048;P5=992;P7=-7920;D=012131312131313131313131214505050501713121213121;CP=1;R=221;
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 42 -> wireless doorbell matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 81 -> SA-434-1 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Read, msg READredu: MU;P0=-2836;P1=540;P2=-4117;P3=-1886;P4=-648;D=01213121313131313131313121313121312121313131312131312131314;CP=1;R=221;
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 12:08:57 4: marcelsduino: Read, msg READredu: MU;P0=-1032;P1=526;P2=-2075;P3=-4117;P4=-16176;P5=970;P7=-8020;D=01213121213121313121212121312121312121212121212131450505050171213131213131312131212121212121212131212131213131212121212;CP=1;R=225;
2021.01.16 12:08:57 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 12:08:58 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 12:08:58 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 12:08:58 4: marcelsduino: Read, msg READredu: MU;P0=-1136;P1=535;P2=-4124;P3=-1892;D=01213131313131313131213131213121213131310;CP=1;R=221;
2021.01.16 12:08:58 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 12:09:09 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 12:09:39 4: Connection accepted from WEB_192.168.178.53_50949
2021.01.16 12:09:39 5: GET /fhem?cmd=%7BAttrVal(%22marcelsduino%22%2C%22rawmsgEvent%22%2C%22%22)%7D&XHR=1&fwcsrf=csrf_152578095482938 HTTP/1.1
Host: 192.168.178.146:8083
Connection: keep-alive
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/87.0.4280.141 Safari/537.36
Accept: */*
Referer: http://192.168.178.146:8083/fhem?detail=marcelsduino&fw_id=
Accept-Encoding: gzip, deflate
Accept-Language: de-DE,de;q=0.9,en-US;q=0.8,en;q=0.7
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 16 Januar 2021, 14:42:16
Zitat von: MaVaderXY am 16 Januar 2021, 12:21:44
Hier mein Logfile von eben 12.06 Uhr bis 12.09 Uhr - hier habe ich mehrmals die Ferbedienung betätigt, auch mal länger den knopf gedrückt und festgehalten.

Code Auswählen

2021.01.16 12:06:11 3: marcelsduino: Set_bWidth, bWidth: Setting MDMCFG4 (10) to f7 = 58 KHz


In dem Logfile sind noch ziemlich viele Aufrufe über das Webinterface von verschiedensten dingen enthalten.
Das macht es leider ein wenig unübersichtllich.
Gibt es einen Grund, weshalb die die Bandbreite auf 58 KHz limitiert hast? Wenn nein, dann solltest Du auf den Standardwert (325 KHz) zurücksetzen.

Danach gerne noch mal ein Logfile Verbose 4, wenn es geht ohne dabei Fhemweb aufzurufen.
Deinen Basic auth key sollte hier auch niemanden was angehen. Das kannst Du umgehen, indem Du das
Code Auswählen
attr global verbose 3 setzt.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 16 Januar 2021, 23:05:22
Zitat von: Sidey am 16 Januar 2021, 14:42:16
Gibt es einen Grund, weshalb die die Bandbreite auf 58 KHz limitiert hast? Wenn nein, dann solltest Du auf den Standardwert (325 KHz) zurücksetzen.

Bei mir stand es Standardmäßig auf 58 - habe etwas damit rumgespielt, dachte das es evtl. daran liegt.
Jetzt aber auf 325 umgestellt für das folgende Logfile. Danke auch für den Tip mit dem Basic Auth. Key!

Code Auswählen
2021.01.16 22:53:10 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 22:53:12 4: marcelsduino: Read, msg READredu: MU;P0=-9076;P1=639;P2=-1925;P3=-3991;P5=92;P6=-796;D=1213121312121212131213561212101312121312131312121212;CP=1;R=235;
2021.01.16 22:53:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 22:53:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 22:53:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 22:53:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 91 -> Atlantic security matches, trying to demodulate
2021.01.16 22:53:12 4: marcelsduino: Read, msg READredu: MU;P0=-1112;P1=631;P2=-2046;P3=-4118;P4=-2824;D=012121212121212121213131313131313121213121312121212131214;CP=1;R=234;
2021.01.16 22:53:13 4: marcelsduino: Read, msg READredu: MU;P0=112;P1=-4547;P2=292;P3=-1125;P4=1876;P5=5924;P6=-2519;P7=3337;D=1234343434343434343434151464343434343437643437676764343434343437343034376764;CP=4;R=241;
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 28 -> IC Ledspot matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 71 -> PEARL matches, trying to demodulate
2021.01.16 22:53:13 4: marcelsduino: Read, msg: MC;LL=-2510;LH=3353;SL=-1128;SH=1887;D=7F750;C=1479;L=17;R=237;
2021.01.16 22:53:58 4: marcelsduino: Read, msg READredu: MU;P0=132;P1=-200;P2=4712;P3=-9122;P4=539;P5=-4106;P6=-2113;P7=-6556;D=012345464645464646464545464546464646454545454545454646454646464646464546454646434546464546464646454546454646464645454545454545464645464646464646454645464647;CP=4;R=242;
2021.01.16 22:53:59 4: marcelsduino: Read, msg READredu: MU;P0=-2070;P1=527;P2=-4115;P3=-8988;P4=-1492;D=012101012101010101212101210101010121212121212121010121010101010101210121010131210101214;CP=1;R=235;
2021.01.16 22:53:59 4: marcelsduino: Read, msg READredu: MU;P0=-504;P1=545;P2=-2097;P3=-4095;P4=-7532;D=0121212131312131212121213131313131313121213121212121212131213121214;CP=1;R=242;
2021.01.16 22:53:59 4: marcelsduino: Read, msg READredu: MU;P0=-272;P1=543;P2=-4096;P3=-2068;P4=-8984;P5=-20108;D=012131312131313131212131213131313121212121212121313121313131313131213121313141213131213131313121213121313131312121212121212131312131313131313121312131314121313121313131312121312131313131212121212121213131213131313131312131213131415;CP=1;R=236;
2021.01.16 22:54:08 4: marcelsduino: Read, msg READredu: MU;P0=-1938;P1=-15340;P2=1979;P3=-5160;P4=132;P6=3680;P7=-3881;D=234067272727202027272720202727272027272727272020202020202720202027202720202027272020202727202020272020202020272727272727202727272027272720202727272021;CP=2;R=240;
2021.01.16 22:54:08 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 44 -> BresserTemeo matches, trying to demodulate
2021.01.16 22:54:08 4: marcelsduino: Parse_MU, Decoded matched MU protocol id 44 dmsg W44#E73BE04518C41FBB9C length 72 dispatch(1/4) RSSI = -82
2021.01.16 22:54:08 4: marcelsduino: SD_WS_Parse protocol 44, rawData E73BE04518C41FBB9C
2021.01.16 22:54:08 4: marcelsduino: SD_WS_Parse BresserTemeo Humidity <= 79  Flag
2021.01.16 22:54:08 4: marcelsduino: SD_WS_Parse BresserTemeo new bin 0111001110011101111100000010001010001100011000100000111111011101110011100
2021.01.16 22:54:08 4: marcelsduino: SD_WS_Parse model=BresserTemeo, temp=-2.2, hum=73, channel=1, id=5F, bat=ok
2021.01.16 22:54:10 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 22:54:13 4: marcelsduino: Read, msg: MC;LL=-2505;LH=3345;SL=-1054;SH=1885;D=7F757F35;C=1464;L=32;R=228;
2021.01.16 22:54:13 4: marcelsduino: Parse_MC, Found manchester protocol id 18 clock 1464 RSSI -88 -> Oregon Scientific v1
2021.01.16 22:54:13 4: marcelsduino: OSV1, input data: 10000000100010101000000011001010
2021.01.16 22:54:13 4: marcelsduino: OSV1, protocol id 18 translated to RFXSensor format
2021.01.16 22:54:13 4: marcelsduino: OSV1, converted to hex: 500A4D1001101500001A00
2021.01.16 22:54:13 4: marcelsduino: Read, msg: MC;LL=-2502;LH=3352;SL=-1044;SH=1892;D=7F757F35;C=1464;L=32;R=229;
2021.01.16 22:54:13 4: marcelsduino: Parse_MC, Found manchester protocol id 18 clock 1464 RSSI -87.5 -> Oregon Scientific v1
2021.01.16 22:54:13 4: marcelsduino: OSV1, input data: 10000000100010101000000011001010
2021.01.16 22:54:13 4: marcelsduino: OSV1, protocol id 18 translated to RFXSensor format
2021.01.16 22:54:13 4: marcelsduino: OSV1, converted to hex: 500A4D1001101500001A00
2021.01.16 22:54:13 4: marcelsduino: Dispatch, 500A4D1001101500001A00, Dropped due to short time or equal msg
2021.01.16 22:54:28 4: marcelsduino: Read, msg READredu: MU;P0=988;P1=-9020;P2=528;P3=-4105;P4=-2085;P5=-772;D=0123242423242424242323242324242424232323232323232424232424242424242324232424212324242324242424232325;CP=2;R=244;
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 92 -> KRINNER Lumix matches, trying to demodulate
2021.01.16 22:54:28 4: marcelsduino: Read, msg READredu: MU;P0=-1204;P1=533;P2=-4095;P3=-2051;P4=92;P5=-720;P6=-8984;D=0121313131312121212121212131312131313131045131213121313161213131213131313121213121313131310;CP=1;R=238;
2021.01.16 22:54:28 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:54:29 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 22:54:29 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 22:54:29 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 91 -> Atlantic security matches, trying to demodulate
2021.01.16 22:54:29 4: marcelsduino: Read, msg READredu: MU;P0=-2972;P1=530;P2=-4115;P3=-2066;P4=-8995;D=01212121212121313121313131313131213121313141213131213131313121213121313131312121212121212131312131313131313121312131314121313121313131312121312131313131212121212121213131213131313131312131213131412131312131313131212131213131313121212121212121313121313131;CP=1;R=241;O;
2021.01.16 22:54:30 4: marcelsduino: Read, msg READredu: MU;P0=-2063;P1=542;P2=-4102;P3=-9002;P4=-13404;P5=32001;D=010101210121010131210101210101010121210121010101012121212121212101012101010101010121012101013145;CP=1;R=240;
2021.01.16 22:54:42 4: marcelsduino: Read, msg READredu: MU;P0=-200;P1=677;P2=-2040;P3=-4131;D=0121212121213131313131313121213121312121212131213121;CP=1;R=231;
2021.01.16 22:54:42 4: marcelsduino: Read, msg READredu: MU;P0=-136;P1=204;P2=630;P3=-4110;P4=-2079;P5=-624;D=0102324242324232324242424242424242423232323232323242423242325;CP=2;R=234;
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Read, msg READredu: MU;P0=-1096;P1=603;P2=-2034;P4=112;P5=-336;P6=-4121;D=0121212124512121212161616161616161212161210;CP=1;R=237;
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 22:54:42 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Read, msg READredu: MU;P0=-2109;P1=626;P2=-4110;P3=156;P4=-324;D=010101012123412341212121210101210121010101012101210101;CP=1;R=234;
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 79 -> wireless doorbell matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Read, msg READredu: MU;P0=4600;P1=-1046;P2=1888;P3=-4560;P4=5916;P5=-2508;P6=3347;P7=-18332;D=0121212121212121212121234325212121212121216521656565212121212121212165656527;CP=2;R=227;
2021.01.16 22:54:43 4: marcelsduino: Read, msg READredu: MU;P0=-2512;P1=3349;P2=-15132;P3=668;P4=-1052;P5=1875;P6=-4572;P7=5908;D=3454545454545454567650545454545454541054101010545454545454545410101052;CP=5;R=226;
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 9 -> weather matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.16 22:54:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 71 -> PEARL matches, trying to demodulate
2021.01.16 22:54:59 4: marcelsduino: Read, msg READredu: MU;P0=1912;P1=-9066;P2=531;P3=-6772;P4=-1928;P5=-4114;P6=32001;D=012324252424242425252425242424242525252525252524242524242424242425242524242125242425242424242525242524242424252525252525252424252424242424242524252424212524242524246;CP=2;R=243;
2021.01.16 22:54:59 4: marcelsduino: Read, msg READredu: MU;P0=2436;P1=532;P2=-4112;P3=-2077;P4=-8980;P5=-1112;P6=412;D=12131213131313121212121212121313121313131313131213121313141213131213131313121213121313131312121212121212131312131315630;CP=1;R=239;
2021.01.16 22:54:59 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:55:08 4: marcelsduino: Read, msg READredu: MU;P0=3524;P1=-1925;P2=1988;P4=-3884;P5=-480;P6=5432;D=0121042424242121242424212124242421242424242421212121256;CP=2;R=97;
2021.01.16 22:55:08 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 44 -> BresserTemeo matches, trying to demodulate
2021.01.16 22:55:10 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 22:55:12 4: marcelsduino: Read, msg READredu: MU;P0=1436;P1=-4103;P2=637;P3=-2110;P4=-976;P5=112;D=012323212321212323232323232454232321212123;CP=2;R=234;
2021.01.16 22:55:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:55:12 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 22:55:12 4: marcelsduino: Read, msg READredu: MU;P0=-2065;P1=617;P2=-4123;P3=-9084;P4=-2968;D=0121212101012121010101010121012101013121010121014;CP=1;R=237;
2021.01.16 22:55:13 4: marcelsduino: Read, msg READredu: MU;P0=2600;P1=-1048;P2=1869;P3=-4576;P4=5908;P5=-2515;P6=3348;P7=-14748;D=0121212121212121212121234325212121212121216521656565212121212121212165656527;CP=2;R=231;
2021.01.16 22:55:13 4: marcelsduino: Read, msg READredu: MU;P0=-10900;P1=-5338;P2=-1050;P3=1883;P4=-4076;P5=5920;P6=-2498;P7=3357;D=23232323232323232345136323232323232327632767676323232323232323276767630;CP=3;R=232;
2021.01.16 22:55:29 4: marcelsduino: Read, msg READredu: MU;P0=2336;P1=-9025;P2=521;P3=-4117;P4=-2070;D=01232424232424242423232423242424242323232323232324242324242424242423242324242123242423242424242323242324242424232323232323232424232424242424242324232424212324242324242424232324232424242423232323232323242423242424242424232423242421232424232424242423232423;CP=2;R=243;O;
2021.01.16 22:55:29 4: marcelsduino: Read, msg READredu: MU;P0=527;P1=-2064;P2=-4110;P3=-2876;P4=92;P5=-6024;P6=-8998;D=01010101020202020202020101020101010101010201020101034502010102010101010202010201010101020202020202020101020101010101010201020101060201010201010101020201020101010102020202020202010102010101010101020102010106020101020101010102020102010101010202020202020201;CP=0;R=243;O;
2021.01.16 22:55:42 4: marcelsduino: Read, msg READredu: MU;P0=-92;P1=618;P2=-4143;P3=-2071;P4=-9004;P5=-3036;D=012121212121212131312121313131313121312131314121313121315;CP=1;R=233;
2021.01.16 22:55:42 4: marcelsduino: Read, msg READredu: MU;P0=-848;P1=616;P2=-2112;P3=-4140;P4=-5612;P5=248;D=012121212121212131313131313131212131312121212121312131212145;CP=1;R=236;
2021.01.16 22:55:42 4: marcelsduino: Read, msg READredu: MU;P0=244;P1=-2756;P2=615;P3=-4122;P4=-1939;D=01232424232423232424242424242424242323232323232324242323242424;CP=2;R=232;
2021.01.16 22:55:43 4: marcelsduino: Read, msg READredu: MU;P0=-2071;P1=632;P2=-4086;P3=-9024;P4=-896;D=012101012101212101010101010101010121212121212121010121210101010101210121010131210101210121214;CP=1;R=227;
2021.01.16 22:55:43 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.16 22:55:43 4: marcelsduino: Read, msg READredu: MU;P0=-1052;P1=1888;P2=-4572;P3=5920;P4=-2512;P5=3345;P6=-13204;D=0101010101010101010123214101010101010105410545454101010101010101054545416;CP=1;R=225;
2021.01.16 22:55:43 4: marcelsduino: Read, msg READredu: MU;P0=5924;P1=-4566;P2=3350;P3=-16856;P4=-2512;P5=-1044;P6=1881;D=5656565656565656565610164656565656565652465242424656565656565656524242463;CP=6;R=221;
2021.01.16 22:55:59 4: marcelsduino: Read, msg READredu: MU;P0=-296;P1=320;P2=-156;P3=525;P4=-9007;P5=-4106;P6=-2070;D=01234353636353636363635353635363636363535353535353536363536363636363635363536363435363635363636363535363536363636353535353535353636353636363636363536353636343536363536363636353536353636363635353535353535363635363636363636353635363634353636353636363635353;CP=3;R=240;O;
2021.01.16 22:55:59 4: marcelsduino: Read, msg READredu: MU;P0=-2071;P1=515;P2=-4118;P3=-9003;D=01210101010121212121212121010121010101010101210121010131210101210101010121210121010101012121212121212101012101010101010121012101013121010121010101012121012101010101212121212121210101210101010101012101210101312101012101010101212101210101010121212121212121;CP=1;R=240;O;


Habe in den 2 Minuten mehrmlas die FB betätigt, auch mal die Knöpfe festgehalten.

Hoffe du findest was, bin dir mega dankbar für deine Hilfe!

Grüße & noch ein schönes Wochenende!

MaVader
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 16 Januar 2021, 23:31:51
Da wird einiges emfpangen.

Schwer einzuordnen was von deiner Fernbedienung kommt und was anderweitig empfangen wird.


Hier z.B Daten, die öfters in etwa so auftauchen. Leider muss es in der Übertragung eine Störung gegeben haben aber grundsätzlich findet sich dieses Muster öfters wieder.

Code Auswählen
2021.01.16 22:55:29 4: marcelsduino: Read, msg READredu: MU;P0=527;P1=-2064;P2=-4110;P3=-2876;P4=92;P5=-6024;P6=-8998;D=01010101020202020202020101020101010101010201020101034502010102010101010202010201010101020202020202020101020101010101010201020101060201010201010101020201020101010102020202020202010102010101010101020102010106020101020101010102020102010101010202020202020201;CP=0;R=243;O;


Um das Signal deiner FB genauer zuordnen zu können, müsstest Du in definierten Regelmäßigen Abständen (Beispielsweise alle 10 Sekunden) den gleichen Knopf an der FB drücken.
Dies Regelmäßigen Abstände solltest Du im Log finden können, wenn etwas empfangen wird. Gut wäre, wenn Du noch die Millisekunden mitloggen würdest:
Code Auswählen
attr global mseclog 1

Wichtig ist halt, dass Du den Zeitraum kennst zu dem im Logfile etwas zu finden sein sollte.
Dann sollten wir feststellen können ob der SIGNALduino die Fernbedienung empfängt.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 17 Januar 2021, 00:07:25
Ja empfangen wird viel, das stimmt...

hab jetzt ab 23.56 Uhr alle 10 Sek 1x kurz gedrückt - ab 23.57 Uhr alle 10 Sek für 5 Sek den Knopf gehalten.

Code Auswählen
2021.01.16 23:56:11.239 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 23:56:12.578 4: marcelsduino: Read, msg READredu: MU;P0=-248;P1=112;P2=647;P3=-4094;P5=-2057;D=010232525232523232525252525252525252323232323232320;CP=2;R=230;
2021.01.16 23:56:12.595 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 23:56:12.596 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 23:56:12.597 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 23:56:12.769 4: marcelsduino: Read, msg READredu: MU;P0=-620;P1=610;P2=-2050;P3=-4052;P5=92;D=012121212121313135013131313121213121312121212131213121212;CP=1;R=232;
2021.01.16 23:56:12.777 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 34 -> QUIGG | LIBRA | Mandolyn | Pollin ISOTRONIC matches, trying to demodulate
2021.01.16 23:56:12.784 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 23:56:12.789 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 79 -> wireless doorbell matches, trying to demodulate
2021.01.16 23:56:12.790 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 23:56:12.793 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 91 -> Atlantic security matches, trying to demodulate
2021.01.16 23:56:12.865 4: marcelsduino: Read, msg READredu: MU;P0=-180;P3=146;P4=635;P5=-4107;P7=-2048;D=4547474547454530474747474747474747454545454545454747454;CP=4;R=235;
2021.01.16 23:56:13.551 4: marcelsduino: Read, msg: MC;LL=-2517;LH=3336;SL=-1068;SH=1871;D=7F157F65;C=1465;L=32;R=242;
2021.01.16 23:56:13.554 4: marcelsduino: Parse_MC, Found manchester protocol id 18 clock 1465 RSSI -81 -> Oregon Scientific v1
2021.01.16 23:56:13.555 4: marcelsduino: OSV1, input data: 10000000111010101000000010011010
2021.01.16 23:56:13.555 4: marcelsduino: OSV1, protocol id 18 translated to RFXSensor format
2021.01.16 23:56:13.556 4: marcelsduino: OSV1, converted to hex: 500A4D1001701500002000
2021.01.16 23:56:13.792 4: marcelsduino: Read, msg READredu: MU;P0=-4572;P1=5924;P2=1872;P3=-2512;P4=-1059;P5=3346;P6=-14444;D=01023242424242424542423535353242424242424532454235326;CP=2;R=242;
2021.01.16 23:56:29.153 4: marcelsduino: Read, msg READredu: MU;P0=8980;P1=-9032;P2=534;P3=-4129;P4=-2051;D=01232424232424242423232423242424242323232323232324242423232424242423242324242123242423242424242323242324242424232323232323232424242323242424242324232424212324242324242424232324232424242423232323232323242424232324242424232423242421232424232424242423232423;CP=2;R=244;O;
2021.01.16 23:56:29.610 4: marcelsduino: Read, msg READredu: MU;P0=523;P1=-2066;P2=-4109;P3=-8991;D=01010101020202020202020101010202010101010201020101030201010201010101020201020101010102020202020202010101020201010101020102010103020101020101010102020102010101010202020202020201010102020101010102010201010302010102010101010202010201010101020202020202020101;CP=0;R=243;O;
2021.01.16 23:56:43.540 4: marcelsduino: Read, msg: MC;LL=-2462;LH=3368;SL=-1034;SH=1903;D=FC55FD94;C=1461;L=30;R=241;
2021.01.16 23:56:43.544 4: marcelsduino: Parse_MC, Found manchester protocol id 18 clock 1461 RSSI -81.5 -> Oregon Scientific v1
2021.01.16 23:56:43.796 4: marcelsduino: Read, msg: MC;LL=-2519;LH=3342;SL=-1041;SH=1885;D=7F157F65;C=1464;L=32;R=243;
2021.01.16 23:56:43.799 4: marcelsduino: Parse_MC, Found manchester protocol id 18 clock 1464 RSSI -80.5 -> Oregon Scientific v1
2021.01.16 23:56:43.800 4: marcelsduino: OSV1, input data: 10000000111010101000000010011010
2021.01.16 23:56:43.800 4: marcelsduino: OSV1, protocol id 18 translated to RFXSensor format
2021.01.16 23:56:43.801 4: marcelsduino: OSV1, converted to hex: 500A4D1001701500002000
2021.01.16 23:56:58.875 4: marcelsduino: Read, msg READredu: MU;P0=-468;P1=537;P2=-2057;P3=-7712;P4=136;P5=-1128;P6=-3877;D=0121213451612121612121212161612161212121216;CP=1;R=240;
2021.01.16 23:56:59.162 4: marcelsduino: Read, msg READredu: MU;P0=-756;P1=539;P2=-4093;P3=-1892;D=01213131213131313121213121313131312121213;CP=1;R=240;
2021.01.16 23:56:59.290 4: marcelsduino: Read, msg READredu: MU;P0=-554;P1=521;P2=-2065;P3=-3511;P4=-8988;P5=112;D=0121312121413121213121212121313121312121212135013;CP=1;R=241;
2021.01.16 23:56:59.299 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 30 -> diverse matches, trying to demodulate
2021.01.16 23:56:59.310 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 23:56:59.315 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 79 -> wireless doorbell matches, trying to demodulate
2021.01.16 23:56:59.316 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 23:56:59.320 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 91 -> Atlantic security matches, trying to demodulate
2021.01.16 23:56:59.323 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 104 -> TR60C-1 matches, trying to demodulate
2021.01.16 23:56:59.680 4: marcelsduino: Read, msg READredu: MU;P0=-1600;P1=551;P2=-2064;P3=-4100;P4=-8988;P5=-18656;P6=312;P7=-444;D=01212131212121213131213121212121313131313131312121213131212121213121312121413121213121212121313121312121212131313131313131212121313121212121312131212141567;CP=1;R=241;
2021.01.16 23:56:59.700 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.16 23:56:59.704 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.16 23:56:59.706 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.16 23:56:59.707 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.16 23:56:59.709 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.16 23:57:11.251 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.16 23:57:29.152 4: marcelsduino: Read, msg READredu: MU;P0=-4127;P1=532;P2=-2069;P3=-9018;D=01212101212121210101210121212121010101010101012121210101212121210121012121310121210121212121010121012121212101010101010101212121010121212121012101212131012121012121212101012101212121210101010101010121212101012121212101210121213101212101212121210101210121;CP=1;R=242;O;
2021.01.16 23:57:29.620 4: marcelsduino: Read, msg READredu: MU;P0=-2064;P1=528;P2=-4081;P3=-8993;D=01010121212121212121010101212101010101210121010131210101210101010121210121010101012121212121212101010121210101010121012101013121010121010101012121012101010101212121212121210101012121010101012101210101312101012101010101212101210101010121212121212121010101;CP=1;R=240;O;
2021.01.16 23:57:59.152 4: marcelsduino: Read, msg READredu: MU;P0=15644;P1=-9037;P2=522;P3=-4122;P4=-2069;D=01232424232424242423232423242424242323232323232324242423232424242423242324242123242423242424242323242324242424232323232323232424242323242424242324232424212324242324242424232324232424242423232323232323242424232324242424232423242421232424232424242423232423;CP=2;R=243;O;
2021.01.16 23:57:59.611 4: marcelsduino: Read, msg READredu: MU;P0=525;P1=-2073;P2=-4098;P3=-8983;D=01010101020202020202020101010202010101010201020101030201010201010101020201020101010102020202020202010101020201010101020102010103020101020101010102020102010101010202020202020201010102020101010102010201010302010102010101010202010201010101020202020202020101;CP=0;R=243;O;

Für den Fall, dass die FB dabei ist, was kann man dann machen?
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 17 Januar 2021, 12:44:40
Leider habe ich dem Log keine Einträge im 10 Sekundentakt gesehen.

Das kann mit deiner Drück Frequenz zusammen hängen oder aber deine Fernbedienung Sendet überhaupt nicht auf 433.92 MHz.

Ich nehme an, die Fernbedienung und der Signalduino waren bei deinem Test im gleichen Raum


Vielleicht kannst Du durch öffnen der Fernbedienung oder in sonstigen Unterlagen dazu etwas zur Frequenz finden.

Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 17 Januar 2021, 22:36:27
Hab es mir schon fast gedacht.
Ich habe die ein Kanal Bedienung genommen. Hier jetzt noch mal ein Log mit der 15 Kanal Bedienung, dazu im Anhang die Bedienungsanleitung meiner FB - hier steht auch die Frequenz von 433.92.
Das öffnen ist bei den Dingern leider sehr schwierig, bis nicht möglich, außer ich zerstöre sie.

Die FB lag beim drücken direkt neben dem signalduino.

Bei dem folgenden Log habe ich auch wieder ca. alle 10 Sek. gedrückt. in der ersten Minute 22.25 Uhr kurz gedrückt, in der 2. Minute 22.26 Uhr 5 Sekunden lang gedrückt.

Was meinst du mit der Drückfrequenz?

Müsste der Signalduino trotzdem was erkennen, auch wenn es Rolling Codes sind?

Code Auswählen
2021.01.17 22:25:01.012 4: marcelsduino: Read, msg READredu: MU;P0=-296;P1=531;P2=-2051;P3=-4102;P4=-656;D=0121312121212131312131212121213131313131313131313131312121214;CP=1;R=238;
2021.01.17 22:25:01.016 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:25:01.024 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.17 22:25:01.030 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:25:01.032 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:25:01.034 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:25:01.035 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:25:01.037 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:25:01.123 4: marcelsduino: Read, msg READredu: MU;P0=-204;P1=526;P2=-4066;P3=-2054;D=012131312131313131212131213131313121212121212121212;CP=1;R=242;
2021.01.17 22:25:26.956 4: marcelsduino: Read, msg READredu: MU;P0=-208;P1=582;P2=-4084;P3=-2062;P4=-9038;D=01213131213131312121312131313131312121212121212121212121313131313121312131314121313121313131212131213131313131212121212121212121212131313131312131213131412131312131313121213121313131313121212121212121212121213131313131213121313141213131213131312121312131;CP=1;R=254;O;
2021.01.17 22:25:27.440 4: marcelsduino: Read, msg READredu: MU;P0=-2073;P1=582;P2=-4137;P3=-9006;D=01010101212121212121212121212101010101012101210101312101012101010121210121010101010121212121212121212121210101010101210121010131210101210101012121012101010101012121212121212121212121010101010121012101013121010121010101212101210101010101212121212121212121;CP=1;R=254;O;
2021.01.17 22:25:29.063 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.17 22:25:30.443 4: marcelsduino: Read, msg READredu: MU;P0=-976;P1=535;P2=-1959;P3=-4106;D=0121312121212131313131313131313131313121212121312;CP=1;R=242;
2021.01.17 22:25:30.668 4: marcelsduino: Read, msg READredu: MU;P0=-4090;P1=581;P2=-2076;P3=-8992;P4=-3000;D=0121012121310121210121212121010121012121212101014;CP=1;R=242;
2021.01.17 22:25:31.019 4: marcelsduino: Read, msg READredu: MU;P0=-2068;P1=538;P2=-4121;P3=-3124;P4=126;P5=-844;P6=-8980;P7=-1248;D=010101010121212121212121212121345121010101010401012101016121010121010101012121012101010101212121212121212121212121010101017;CP=1;R=234;
2021.01.17 22:25:31.024 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:25:36.867 4: marcelsduino: Read, msg READredu: MU;P0=298;P1=654;P2=-191;P5=-928;P6=144;P7=-550;D=5676707071207071207120712071207121207020;CP=0;R=234;
2021.01.17 22:25:36.896 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:25:36.900 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:25:36.903 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:25:36.904 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:25:36.906 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:25:37.682 4: marcelsduino: Read, msg READredu: MU;P0=-313;P1=555;P2=285;P3=-567;P5=112;P6=-144;D=01023102310231010232320562323232323232320;CP=2;R=230;
2021.01.17 22:25:37.697 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.17 22:25:37.710 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:25:37.714 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:25:37.716 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:25:37.717 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:25:37.719 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:25:56.839 4: marcelsduino: Read, msg READredu: MU;P0=-316;P1=587;P2=-4097;P3=-1972;D=01212131213131313131212121212121212121213;CP=1;R=253;
2021.01.17 22:25:56.966 4: marcelsduino: Read, msg READredu: MU;P0=-1230;P1=587;P2=-4136;P3=-2052;P4=-9004;D=012131213131412131312131313121213121313131313121210;CP=1;R=1;
2021.01.17 22:25:56.969 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:25:57.187 4: marcelsduino: Read, msg READredu: MU;P0=-2792;P1=587;P2=-4103;P3=-2096;P4=-8428;P5=7576;D=01212121212121212131313131312131213131412131312131313121213121313131313121212135212121212121313131313121312131314;CP=1;R=250;
2021.01.17 22:25:57.325 4: marcelsduino: Read, msg READredu: MU;P0=-1300;P1=581;P2=-3940;P3=102;P4=-308;P5=-2096;P7=-536;D=0121212121212121212341212151515151512151237151512;CP=1;R=1;
2021.01.17 22:25:57.342 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:25:57.347 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 79 -> wireless doorbell matches, trying to demodulate
2021.01.17 22:25:57.348 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:25:57.351 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 91 -> Atlantic security matches, trying to demodulate
2021.01.17 22:25:57.416 4: marcelsduino: Read, msg READredu: MU;P0=-316;P1=92;P2=-2024;P3=585;P6=-3898;P7=776;D=01232363232363232323676323632323232323636363636363636;CP=3;R=0;
2021.01.17 22:26:00.320 4: marcelsduino: Read, msg READredu: MU;P0=-2021;P1=-8656;P2=92;P3=-228;P4=537;P5=-4090;P7=-416;D=12345404045472040404045454045404040404545454545454545454545454040404045404540;CP=4;R=237;
2021.01.17 22:26:00.329 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 29 -> HT12e matches, trying to demodulate
2021.01.17 22:26:00.331 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 30 -> diverse matches, trying to demodulate
2021.01.17 22:26:00.343 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:00.346 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:00.349 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:00.350 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:00.353 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:00.359 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 104 -> TR60C-1 matches, trying to demodulate
2021.01.17 22:26:00.399 4: marcelsduino: Read, msg READredu: MU;P0=-304;P1=557;P2=-2054;P3=-8972;P4=-4087;P5=-456;P6=92;P7=-1248;D=01213141212141212121214141214121212121414141567;CP=1;R=238;
2021.01.17 22:26:00.404 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:00.418 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:00.420 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:00.422 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:00.423 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:00.424 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:00.426 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 92 -> KRINNER Lumix matches, trying to demodulate
2021.01.17 22:26:00.698 4: marcelsduino: Read, msg READredu: MU;P0=-1500;P1=531;P2=-4101;P3=688;P4=-2067;P5=-9026;P6=-748;D=01212123212121212141414141214121414151214141214141414121214121414141412121212121212121212121214141414121412141415121414121414141412121412141414141212121212121216;CP=1;R=238;
2021.01.17 22:26:00.700 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:00.707 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.17 22:26:00.710 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:00.712 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:00.713 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:00.714 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:00.715 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:00.718 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 92 -> KRINNER Lumix matches, trying to demodulate
2021.01.17 22:26:09.913 4: marcelsduino: Read, msg READredu: MU;P0=-504;P1=1973;P2=-3883;P3=-1926;P4=160;P5=-1274;D=0121212121313131313104513131312121213121213121315;CP=1;R=244;
2021.01.17 22:26:09.929 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 50 -> Opus_XT300 matches, trying to demodulate
2021.01.17 22:26:09.933 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 64 -> WH2 matches, trying to demodulate
2021.01.17 22:26:09.935 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 71 -> PEARL matches, trying to demodulate
2021.01.17 22:26:09.942 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 98 -> GEA-028DB matches, trying to demodulate
2021.01.17 22:26:26.952 4: marcelsduino: Read, msg READredu: MU;P0=-136;P1=92;P2=-878;P3=180;P4=574;P5=-4108;P6=-2060;P7=-9023;D=01232454646454646464545464546464646464545454545454545454545464646464645464546464745464645464646454546454646464646454545454545454545454546464646464546454646474546464546464645454645464646464645454545454545454545454646464646454645464647454646454646464545464;CP=4;R=250;O;
2021.01.17 22:26:27.436 4: marcelsduino: Read, msg READredu: MU;P0=-4092;P1=590;P2=-2066;P3=-8987;D=01212121212101010101010101010101012121212121012101212131012121012121210101210121212121210101010101010101010101212121212101210121213101212101212121010121012121212121010101010101010101010121212121210121012121310121210121212101012101212121212101010101010101;CP=1;R=254;O;
2021.01.17 22:26:29.066 4: marcelsduino: KeepAlive, ok, retry = 0
2021.01.17 22:26:30.472 4: marcelsduino: Read, msg READredu: MU;P0=-392;P1=538;P2=-2123;P3=-3868;P4=-9060;D=01213121212121313131313131313131313131212121213121312121413;CP=1;R=237;
2021.01.17 22:26:30.711 4: marcelsduino: Read, msg READredu: MU;P0=-1436;P1=538;P2=-2058;P3=-4111;P4=-260;P5=32001;D=012131212121213131313131313131313131312121212145;CP=1;R=239;
2021.01.17 22:26:30.730 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:30.733 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:30.734 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:30.851 4: marcelsduino: Read, msg READredu: MU;P0=-172;P1=160;P2=-9120;P3=528;P4=-3902;P5=-2062;D=0123435353435353535343435343535353534343434343434;CP=3;R=242;
2021.01.17 22:26:30.978 4: marcelsduino: Read, msg READredu: MU;P0=-300;P1=543;P2=-4105;P3=-2055;P4=-1264;D=0121313131312121312131313131212121212121214;CP=1;R=242;
2021.01.17 22:26:30.982 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:31.074 4: marcelsduino: Read, msg READredu: MU;P0=-2638;P1=534;P2=-4117;P3=-2045;P4=-9004;D=01212121213131313121312131314121313121313131312121310;CP=1;R=242;
2021.01.17 22:26:33.982 4: marcelsduino: Read, msg READredu: MU;P0=-666;P1=390;P2=-260;P3=245;P5=578;P6=-492;P7=164;D=012305230523052523030303030361030303030707072;CP=3;R=241;
2021.01.17 22:26:34.019 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:34.024 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:34.026 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:34.028 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:34.031 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:34.445 4: marcelsduino: Read, msg READredu: MU;P0=323;P1=-297;P2=-649;P3=554;P4=200;P5=-388;P7=-160;D=0102314231314242420202020202020202020532024242423142314237;CP=0;R=241;
2021.01.17 22:26:34.447 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:34.453 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 40 -> Romotec  matches, trying to demodulate
2021.01.17 22:26:34.463 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 54 -> TFA 30.3233.01 matches, trying to demodulate
2021.01.17 22:26:34.464 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:34.466 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 70 -> FHT80TF matches, trying to demodulate
2021.01.17 22:26:34.467 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 73 -> FHT80 matches, trying to demodulate
2021.01.17 22:26:34.468 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 74 -> FS20 matches, trying to demodulate
2021.01.17 22:26:34.472 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:56.560 4: marcelsduino: Read, msg READredu: MU;P0=-120;P1=583;P2=-4101;P3=-1983;P4=-1424;P5=92;P6=-2568;D=012131312131313121213121313131313121456121212121212121213;CP=1;R=255;
2021.01.17 22:26:56.565 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:57.151 4: marcelsduino: Read, msg READredu: MU;P0=-2056;P1=586;P2=96;P3=-304;P4=-4086;P5=-1088;D=010102310141410141010101010141414141414141414141410101015;CP=1;R=254;
2021.01.17 22:26:57.155 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 8 -> TX3 Protocol matches, trying to demodulate
2021.01.17 22:26:57.171 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 61 -> FS10 matches, trying to demodulate
2021.01.17 22:26:57.177 4: marcelsduino: Parse_MU, Fingerprint for MU protocol id 80 -> EM1000WZ matches, trying to demodulate
2021.01.17 22:26:57.482 4: marcelsduino: Read, msg READredu: MU;P0=-5336;P1=580;P2=-2059;P3=-6896;P4=448;P6=-4107;P7=-8992;D=12121342161212161212121616121612121212121616161616161616161616121212121216121612121710;CP=1;R=252;
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Sidey am 17 Januar 2021, 23:14:57
Zitat von: MaVaderXY am 17 Januar 2021, 22:36:27
Frequenz von 433.92.
Ja steht zumindest in der Anleitung. +- 100 Khz :) Wollen wir mal hoffen, dass Sie das Produkt nicht geändert haben.


Zitat von: MaVaderXY am 17 Januar 2021, 22:36:27
Bei dem folgenden Log habe ich auch wieder ca. alle 10 Sek. gedrückt. in der ersten Minute 22.25 Uhr kurz gedrückt, in der 2. Minute 22.26 Uhr 5 Sekunden lang gedrückt.

Was meinst du mit der Drückfrequenz?

Müsste der Signalduino trotzdem was erkennen, auch wenn es Rolling Codes sind?

Ich kann ja nicht erraten, wann Du gedrückt hat. Im 10 Sekunden Takt ist halt leider im Log nichts zu sehen, eher im 20 Sekundentakt, ob das deine Fernbedienung ist kann ich nicht sagen.
Für einen Temperatursensor sendet das eigentlich zu oft, aber es sieht sehr ähnlich einem solchen Signal aus. Kannst ja mal schauen ob Du ähnliche Daten auch im 20 Sekunden Takt empfängst, wenn Du die FB nicht betätigst.
Rolling Codes spielen keine Rolle. Wir arbeiten aktuell nur daran, ein empfangenes Signal zu finden. Was das bedeutet ist noch nicht relevant.

Schau dir noch mal deine signalduino Einstellungen an.
Ich habe auch das Gefühl, deine Konfiguration entspricht nicht mehr dem List.

Was gibt ein

Code Auswählen
get marcelsduino config zurück?


Das sind die Muster die so im 20 Sekunden Takt kommen. Es sind auch noch ein paar andere Signale dabei aber die kommen eher 1x die Minute.
Code Auswählen

2021.01.17 22:25:30.668 4: marcelsduino: Read, msg READredu: MU;P0=-4090;P1=581;P2=-2076;P3=-8992;P4=-3000;D=0121012121310121210121212121010121012121212101014;CP=1;R=242;
2021.01.17 22:25:57.187 4: marcelsduino: Read, msg READredu: MU;P0=-2792;P1=587;P2=-4103;P3=-2096;P4=-8428;P5=7576;D=01212121212121212131313131312131213131412131312131313121213121313131313121212135212121212121313131313121312131314;CP=1;R=250;


2021.01.17 22:26:09.913 4: marcelsduino: Read, msg READredu: MU;P0=-504;P1=1973;P2=-3883;P3=-1926;P4=160;P5=-1274;D=0121212121313131313104513131312121213121213121315;CP=1;R=244;
2021.01.17 22:26:27.436 4: marcelsduino: Read, msg READredu: MU;P0=-4092;P1=590;P2=-2066;P3=-8987;D=01212121212101010101010101010101012121212121012101212131012121012121210101210121212121210101010101010101010101212121212101210121213101212101212121010121012121212121010101010101010101010121212121210121012121310121210121212101012101212121212101010101010101;CP=1;R=254;O;
2021.01.17 22:26:56.560 4: marcelsduino: Read, msg READredu: MU;P0=-120;P1=583;P2=-4101;P3=-1983;P4=-1424;P5=92;P6=-2568;D=012131312131313121213121313131313121456121212121212121213;CP=1;R=255;
2021.01.17 22:26:57.482 4: marcelsduino: Read, msg READredu: MU;P0=-5336;P1=580;P2=-2059;P3=-6896;P4=448;P6=-4107;P7=-8992;D=12121342161212161212121616121612121212121616161616161616161616121212121216121612121710;CP=1;R=252;

[/quote]


Ich habe irgendwie das Gefühl, dass durch Einstellungen am Empfänger der Sender empfangen werden könnte.
Da vielleicht mal mit der Frequenz in der 100 Khz Toleranz etwas experimentieren.


Grüße Sidey
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: MaVaderXY am 21 Januar 2021, 12:14:28
Zitat von: Sidey am 17 Januar 2021, 23:14:57
Ja steht zumindest in der Anleitung. +- 100 Khz :) Wollen wir mal hoffen, dass Sie das Produkt nicht geändert haben.

Zitat
Ich kann ja nicht erraten, wann Du gedrückt hat. Im 10 Sekunden Takt ist halt leider im Log nichts zu sehen, eher im 20 Sekundentakt, ob das deine Fernbedienung ist kann ich nicht sagen.
Für einen Temperatursensor sendet das eigentlich zu oft, aber es sieht sehr ähnlich einem solchen Signal aus. Kannst ja mal schauen ob Du ähnliche Daten auch im 20 Sekunden Takt empfängst, wenn Du die FB nicht betätigst.
Rolling Codes spielen keine Rolle. Wir arbeiten aktuell nur daran, ein empfangenes Signal zu finden. Was das bedeutet ist noch nicht relevant.

Hier mal ein kurzer Auszug aus meinem Event Monitor - es wird die ganze Zeit etwas aufgezeichnet, an der FB habe ich in der Zeit jedoch nichts gemacht.

Code Auswählen
2021-01-21 12:07:03.815 SIGNALduino marcelsduino RAWMSG MU;P0=112;P1=-4082;P2=548;P3=-2069;P4=-8997;D=01232321232323232121232123232323232323232323212123232121232323232123212323242123232123232323212123212323232323232323232321212323212123232323212321232324212323212323232321212321232323232323232323232121232321212323232321232123232421232321232323232121232123;CP=2;R=239;O;
2021-01-21 12:07:05.135 SIGNALduino marcelsduino RAWMSG MU;P0=547;P1=-2054;P2=-4085;P3=-8992;D=01010201010101010102020101020201010101020102010103020101020101010102020102010101010101010101010202010102020101010102010201010302010102010101010202010201010101010101010101020201010202010101010201020101030201010201010101020201020101010101010101010102020101;CP=0;R=234;O;
2021-01-21 12:07:14.633 SIGNALduino marcelsduino RAWMSG MU;P0=4028;P1=-1929;P2=1966;P3=-3892;P4=-728;D=012103232323212123212321212321232123232323232121212121232123212323232321212123232123212323212324;CP=2;R=244;
2021-01-21 12:07:18.638 SIGNALduino marcelsduino RAWMSG MU;P0=-1076;P1=-404;P2=594;P3=-4257;P4=-2096;P5=-3160;P7=-533;D=232424232423232424242424242424242424242424242323242324242424242423242324242523252724272027242724272527242720272027202724212024;CP=2;R=235;
2021-01-21 12:07:18.730 SIGNALduino marcelsduino RAWMSG MU;P0=640;P1=-2109;P2=1073;P4=-4112;P5=-1508;P6=-944;P7=-588;D=0121212121212121210104010105010101052106070601210401010;CP=0;R=234;
2021-01-21 12:07:18.793 SIGNALduino marcelsduino RAWMSG MU;P0=621;P1=-4105;P2=-2206;P3=156;D=01020201020102320202020202020202020202020202020102;CP=0;R=238;
2021-01-21 12:07:19.220 SIGNALduino marcelsduino RAWMSG MU;P0=-2069;P1=634;P2=-4127;P3=-9063;D=0101210101010101012101210101312101012101212101010101010101010101010101010121210121010101010101210121010131210101210121210101010101010101010101010101012121012101010101010121012101013121010121012121010101010101010101010101010101212101210;CP=1;R=238;
2021-01-21 12:07:23.108 SIGNALduino marcelsduino RAWMSG MU;P0=-112;P1=592;P2=-2054;P3=-4095;P4=-8996;D=01212121313121312121212121212121212121312131213131212121213121312121413121213121212131312131212121212121212121212131213121313121212121312131212141312121312121213131213121212121212121212121213121312131312121212131213121214131212131212121313121312121212121;CP=1;R=250;O;
2021-01-21 12:07:23.568 SIGNALduino marcelsduino RAWMSG MU;P0=-2052;P1=589;P2=-4142;P3=-9022;P4=156;D=01012101010121012101212101010101210121010131210101210101012104010121010101010101010101010121012101212101010101210121010131210101210101012121012101010101010101010101012101210121210101010121012101013121010121010101212101210101010101010101010101210121012121;CP=1;R=250;O;
2021-01-21 12:07:33.803 SIGNALduino marcelsduino RAWMSG MU;P0=2880;P1=-13896;P2=543;P3=-2058;P4=-4113;P5=-8994;D=01232324232323232424232423232323232323232323242423242323232323232423242323252423232423232323242423242323232323232323232324242324232323232323242324232325242323242323232324242324232323232323232323232424232423232323232324232423232524232324232323232424232423;CP=2;R=239;O;
2021-01-21 12:07:33.865 SIGNALduino marcelsduino RAWMSG MU;P0=535;P1=-2119;P2=-4096;P3=-8500;D=010101010102020102010101010101020102010103;CP=0;R=241;
2021-01-21 12:07:34.272 SIGNALduino marcelsduino RAWMSG MU;P0=-452;P1=542;P2=-4099;P3=-2088;P4=-8999;P5=-15704;D=012131312131313131212131213131313131313131313121213121313131313131213121313141213131213131313121213121313131313131313131312121312131313131313121312131314121313121313131312121312131313131313131313131212131213131313131312131213131415;CP=1;R=241;
2021-01-21 12:07:48.536 SIGNALduino marcelsduino RAWMSG MU;P0=-2082;P1=-344;P2=2008;P3=-112;P4=9152;P5=-9202;P6=621;P7=-4143;D=234567606067606767606060606060606060606060606060676760676060606060606760676060656760606760676760606060606060606061;CP=6;R=236;
2021-01-21 12:07:48.972 SIGNALduino marcelsduino RAWMSG MU;P0=-2067;P1=637;P2=-4131;P3=-9005;D=01010101010121210121010101010101210121010131210101210121210101010101010101010101010101012121012101010101010121012101013121010121012121010101010101010101010101010101212101210101010101012101210101312101012101212101010101010101010101010101010121210121010101;CP=1;R=239;O;
2021-01-21 12:07:49.126 SIGNALduino marcelsduino RAWMSG MU;P0=-2136;P1=615;P2=-6392;P3=-4113;P4=-9056;D=012101310131010141310101310131310101010101010101010101010101013131013101010101010131013101012;CP=1;R=235;
2021-01-21 12:07:49.282 SIGNALduino marcelsduino RAWMSG MU;P0=-2097;P1=629;P2=-4163;P4=-9068;P5=-17676;P6=92;D=01210101210121210101010101010101010101010101012121012101010101010121012101014156;CP=1;R=213;
2021-01-21 12:07:52.792 SIGNALduino marcelsduino RAWMSG MU;P0=1892;P1=-8164;P2=595;P3=-4106;P4=-2107;D=012324242324242423232423242424242424242424242423242324232324242424232423242421;CP=2;R=251;
2021-01-21 12:07:53.231 SIGNALduino marcelsduino RAWMSG MU;P0=-1516;P1=591;P2=-4107;P3=-2052;P4=-9009;D=01213131213131312121312131313131313131313131312131213121213131313121312131314121313121313131212131213131313131313131313131213121312121313131312131213131412131312131313121213121313131313131313131313121312131212131313131213121313141213131213131312121312131;CP=1;R=250;O;
2021-01-21 12:07:53.592 SIGNALduino marcelsduino RAWMSG MU;P0=-2060;P1=583;P2=-4145;P3=-9013;P4=-23268;P5=156;P6=-652;D=010101210101010101012101210121210101010121012101013121010121010101212101210101010101010101010101210121012121010101012101210101312101012101010121210121010101010101010101010121012101212101010101210121010131456;CP=1;R=250;
2021-01-21 12:08:03.387 SIGNALduino marcelsduino RAWMSG MU;P0=-726;P1=112;P2=-190;P3=220;P4=-328;P5=543;P6=-2055;P7=-4124;D=01234545256575656565656565656565657575657565656565650;CP=5;R=239;
2021-01-21 12:08:03.482 SIGNALduino marcelsduino RAWMSG MU;P0=-699;P1=1096;P2=144;P3=-92;P4=546;P5=-2075;P7=-4117;D=010202345474545454547474547454545454545454545454;CP=4;R=239;
2021-01-21 12:08:03.803 SIGNALduino marcelsduino RAWMSG MU;P0=-4105;P1=595;P2=-2108;P3=-3136;P4=812;P5=-824;P6=1268;P7=108;D=010121012121212121210121012121345454563751;CP=1;R=242;
2021-01-21 12:08:03.898 SIGNALduino marcelsduino RAWMSG MU;P0=-664;P1=543;P2=-320;P3=-180;P4=-2071;P5=-4107;P6=896;D=01213141514141414141414141414151514151414141410606;CP=1;R=239;
2021-01-21 12:08:04.010 SIGNALduino marcelsduino RAWMSG MU;P0=-336;P1=537;P2=-2290;P3=-4115;P4=806;P5=-894;P6=228;D=012131212121213131213121212121212121212121245456;CP=1;R=239;
2021-01-21 12:08:04.122 SIGNALduino marcelsduino RAWMSG MU;P0=298;P1=-323;P2=541;P3=-2068;P4=-8996;P5=-4111;P6=-1024;D=01212123232425232325232323232525232523260;CP=2;R=229;
2021-01-21 12:08:14.630 SIGNALduino marcelsduino RAWMSG MU;P0=1983;P1=-1939;P3=-3832;P4=3904;P6=288;P7=-552;D=0103430303030101030103010103010301030303030301010101010301030103030303010101030301030103030103670103;CP=0;R=244;
2021-01-21 12:08:18.508 SIGNALduino marcelsduino RAWMSG MU;P0=1488;P1=-9202;P2=611;P3=-4112;P4=-2090;P5=-260;P6=92;P7=-616;D=01232424232423256324242424242424242424242424242423232423242424242424232423242421232424232423232424242424242424242427;CP=2;R=238;
2021-01-21 12:08:18.565 SIGNALduino marcelsduino RAWMSG MU;P0=614;P2=-422;P3=-2297;P4=-4139;P5=-1065;P6=-7476;P7=-3124;D=020304040304030303030303040304030305060503050205020503050207020503;CP=0;R=237;
2021-01-21 12:08:18.659 SIGNALduino marcelsduino RAWMSG MU;P0=1070;P1=-1334;P2=-2108;P3=594;P5=-536;P6=-276;P7=-3428;D=010102313532363136313631363136313631363136313631363136373;CP=3;R=236;
2021-01-21 12:08:18.883 SIGNALduino marcelsduino RAWMSG MU;P0=-4157;P1=612;P2=-2142;P3=-9044;D=012101212131012121012101012121212121212121212121212121210101210121212121212101210121213101212101212;CP=1;R=236;
2021-01-21 12:08:19.231 SIGNALduino marcelsduino RAWMSG MU;P0=-2085;P1=607;P2=-4146;P3=-9108;P4=-17072;D=012101010101010101010101010101010121210121010101010101210121010131210101210121210101010101010101010101010101012121012101010101010121012101013121010121012121010101010101010101010101010101212101210101010101012101210101314;CP=1;R=239;
2021-01-21 12:08:23.105 SIGNALduino marcelsduino RAWMSG MU;P0=-1044;P1=595;P2=-756;P3=-4090;P4=-2039;P5=-8996;D=01213141413141414131314131414141414141414141414131413141313141414141314131414151314141314141413131413141414141414141414141413141314131314141414131413141415131414131414141313141314141414141414141414141314131413131414141413141314141513141413141414131314131;CP=1;R=252;O;
2021-01-21 12:08:23.607 SIGNALduino marcelsduino RAWMSG MU;P0=-2057;P1=578;P2=-4100;P3=-9017;D=01010101010101010101012101210121210101010121012101013121010121010101212101210101010101010101010101210121012121010101012101210101312101012101010121210121010101010101010101010121012101212101010101210121010131210101210101012121012101010101010101010101012101;CP=1;R=250;O;

ZitatSchau dir noch mal deine signalduino Einstellungen an.
Ich habe auch das Gefühl, deine Konfiguration entspricht nicht mehr dem List.

Hier noch mal die aktuelle List, ich habe eigentlich nichts geändert außer etwas mit der Frequenz gespielt.

Code Auswählen
Internals:
   Clients    :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:SIGNALduino_un:
   DEF        /dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
   DMSG       W44#E52BE0B11AD41F4F94
   DevState   initialized
   DeviceName /dev/serial/by-id/usb-SHK_SIGNALduino_433-if00-port0@57600
   FD         21
   FUUID      5ffc5229-f33f-ac42-6956-7fab90c3d53f38d2
   IDsNoDispatch 2,72.1,82
   ITClock    250
   LASTDMSG   W44#E52BE0B11AD41F4F94
   LASTDMSGID 44
   MSGCNT     29683
   NAME       marcelsduino
   NR         59
   NR_CMD_LAST_H 3
   PARTIAL   
   RAWMSG     MU;P0=2592;P1=-1932;P2=1968;P3=-3889;P4=3900;P5=-21256;D=012343232323212123212321212321232123232323232121212121232123232121212321212123232123212323212321232121212121232323232321232121232323232321212321232125;CP=2;R=246;
   RSSI       -79
   STATE      opened
   TIME       1611227416
   TYPE       SIGNALduino
   cc1101_available 1
   sendworking 0
   version    V 3.5.0-dev+20201207 SIGNALduino cc1101 (chip CC1101) - compiled at Dec 18 2020 22:34:07
   versionProtocols 1.21
   versionmodul v3.4.4
   DoubleMsgIDs:
   MatchList:
     10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
     11:SD_WS09 ^P9#F[A-Fa-f0-9]+
     12:SD_WS   ^W\d+x{0,1}#.*
     13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
     14:Dooya   ^P16#[A-Fa-f0-9]+
     15:SOMFY   ^Ys[0-9A-F]+
     16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
     17:SD_UT   ^P(?:14|20|26|29|30|34|46|68|69|76|81|83|86|90|91|91.1|92|93|95|97|99|104)#.*
     18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
     19:CUL_WS  ^K[A-Fa-f0-9]{5,}
     1:IT       ^i......
     20:Revolt  ^r[A-Fa-f0-9]{22}
     21:FS10    ^P61#[A-F0-9]+
     22:Siro    ^P72#[A-Fa-f0-9]+
     23:FHT     ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
     24:FS20    ^81..(04|0c)..0101a001
     25:CUL_EM  ^E0.................
     26:Fernotron ^P82#.*
     27:SD_BELL ^P(?:15|32|41|42|57|79|96|98)#.*
     28:SD_Keeloq ^P(?:87|88)#.*
     29:SD_GT   ^P49#[A-Fa-f0-9]+
     2:CUL_TCM97001 ^s[A-Fa-f0-9]+
     3:SD_RSL   ^P1#[A-Fa-f0-9]{8}
     4:OREGON   ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
     5:CUL_TX   ^TX..........
     6:SD_AS    ^P2#[A-Fa-f0-9]{7,8}
     7:Hideki   ^P12#75[A-F0-9]+
     9:CUL_FHTTK ^T[A-F0-9]{8}
     X:SIGNALduino_un ^[u]\d+#.*
   QUEUE:
   READINGS:
     2021-01-21 11:44:18   cc1101_config   Freq: 433.921 MHz, Bandwidth: 325 KHz, rAmpl: 42 dB, sens: 8 dB, DataRate: 5603.79 Baud
     2021-01-21 11:44:18   cc1101_config_ext Modulation: ASK/OOK, Syncmod: No preamble/sync
     2021-01-14 09:17:23   cc1101_patable  C3E = 00 84 00 00 00 00 00 00 => 5_dBm
     2021-01-21 12:06:24   config          MS=0;MU=1;MC=1;Mred=1
     2021-01-21 11:44:08   ping            OK
     2021-01-14 09:17:22   state           opened
   XMIT_TIME:
     1610919515
     1610919517
     1610919519
   additionalSets:
   keepalive:
     ok         1
     retry      0
   mcIdList:
     10
     11
     12
     18
     43
     47
     52
     57
     58
     96
   msIdList:
     0
     0.1
     0.2
     0.3
     0.4
     0.5
     1
     3
     3.1
     4
     6
     7
     13
     13.2
     14
     15
     17
     20
     23
     25
     33
     33.1
     33.2
     35
     41
     49
     51
     53
     54.1
     55
     65
     68
     74.1
     87
     88
     90
     91.1
     93
   muIdList:
     8
     9
     13.1
     16
     17.1
     19
     21
     22
     24
     26
     27
     28
     29
     30
     31
     32
     34
     36
     37
     38
     39
     40
     42
     44
     44.1
     45
     46
     48
     49.1
     49.2
     50
     54
     56
     59
     60
     61
     62
     64
     66
     67
     69
     70
     71
     72
     73
     74
     76
     79
     80
     81
     83
     84
     85
     86
     89
     91
     92
     94
     95
     97
     98
     99
     104
     105
Attributes:
   cc1101_frequency 433.921
   rawmsgEvent 1
   verbose    4

Was gibt ein
Zitat
Code Auswählen
get marcelsduino config zurück?

Folgendes gibt der Befehl aus: config: MS=0;MU=1;MC=1;Mred=1


Das ist doch irgendwie komisch das die FB nicht erkannt werden :-(
Titel: Antw:Signalduino und Yooda - Need Help
Beitrag von: Ralf9 am 21 Januar 2021, 12:32:37
ZitatBandwidth: 325 KHz
vielleicht bringts was wenn Du die Bandwidth auf ca 500 erhöhst, es gibt cc1101 Module die haben eine ungenaue Frequenz (z.B. von neuftech)

Gruß Ralf

Nur Text | Text mit Bildern