Hallo,
brauche mal wieder Eure Hilfe. Meine CCU startet nicht. Hier das List!
Internals:
CCUNum 1
Clients :HMCCUDEV:HMCCUCHN:HMCCURPC:HMCCURPCPROC:
DEF 192.168.4.8
FUUID 5cfa4569-f33f-2440-6ffe-ca612b90af7a3625
NAME HMIPCCU
NOTIFYDEV global,TYPE=(HMCCU|HMCCUDEV|HMCCUCHN)
NR 52
NTFY_ORDER 50-HMIPCCU
RPCState error
STATE error/Error
TYPE HMCCU
ccuaddr BidCoS-RF
ccuchannels 129
ccudevices 10
ccuif BidCos-RF
ccuinterfaces BidCos-RF,HmIP-RF,VirtualDevices,CUxD
ccuip 192.168.4.8
ccuname HM-RCV-50 BidCoS-RF
ccustate active
ccutype CCU2/3
host 192.168.4.8
prot http
version 4.3.025
READINGS:
2021-01-11 12:46:53 count_channels 129
2021-01-11 12:46:53 count_devices 10
2021-01-11 12:46:53 count_groups 0
2021-01-11 12:46:53 count_interfaces 4
2021-01-11 12:46:53 count_programs 4
2021-01-11 13:19:02 rpcstate error
2021-01-11 13:25:41 state Error
hmccu:
defInterface BidCos-RF
defPort 2001
evtime 0
evtimeout 0
rpccount 0
rpcports 2001,2010
updatetime 0
dann folgen jede Menge Adressen und dann
Attributes:
ccuflags procrpc
cmdIcon on:general_an off:general_aus
event-on-update-reading .*
eventMap /rpcserver on:on/rpcserver off:off/
room Homematic
rpcinterfaces BidCos-RF,HmIP-RF
rpcinterval 5
rpcport 2001,2010
rpcqueue /tmp
rpcserver on
stateFormat rpcstate/state
Meine Definition:
define HMIPCCU HMCCU 192.168.x.x
setuuid HMIPCCU 5cfa4569-f33f-2440-6ffe-ca612b90af7a3625
attr HMIPCCU ccudef-hmstatevals 1
attr HMIPCCU ccuflags procrpc
attr HMIPCCU cmdIcon on:general_an off:general_aus
attr HMIPCCU event-on-update-reading .*
attr HMIPCCU eventMap /rpcserver on:on/rpcserver off:off/
attr HMIPCCU room Homematic
attr HMIPCCU rpcinterfaces BidCos-RF,HmIP-RF
attr HMIPCCU rpcinterval 5
attr HMIPCCU rpcport 2001,2010
attr HMIPCCU rpcqueue /tmp
attr HMIPCCU rpcserver on
attr HMIPCCU stateFormat rpcstate/state
Arbeite mit windows
Gruss
Lothar
Was für eine CCU?
Ist diese "da"?
Funzt die CCU oder nur die FHEM-Connecktion nicht?
CCU2
Konnektion OK!
D.h. die CCU2 funktioniert komplett, Du hast "nur" die Konnecktion verlohren?
Und was steht im FHEM Logfile bezüglich ccu?
Und bist Du Dir mit den Ports sicher?
Jetzt startet der rpcserver. Danke für die Hilfe!
.. was war der Fehler?
und Btw: Warum machst Du 3 Threads wegen CCU gleichzeitig auf?
Ich war der Fehler, hatte nicht richtig initialisiert.