Hallo ich bin am Ende meines Lateins und hoffe Ihr könnt mir weiterhelfen.
Ich habe ein Fibaro FGBS-001 schon seit längerer Zeit in Betrieb. Er funktionierte auch super gut. Alle Tempersensor die ich per TP, TD und Gnd angeschlossen habe funktionierten und wurde auch angezeigt.
Nun musste ich aufgrund eines neuen Sticks das Device neu alernen. Also Factory Reset und inclusion.
Dieses habe ich mehrfach ausgeführt jedoch wurden die Device Childs nicht angelegt. Somit keine Temperaturen mehr:
Internals:
DEF fb9e5178 30
FUUID 5ffdef22-f33f-9943-f232-d1d7ddc4289013c8
IODev ZWDongle_1
LASTInputDev ZWDongle_1
MSGCNT 2
NAME ZWave_SENSOR_BINARY_30
NR 268
STATE associationAdd 3 1
TYPE ZWave
ZWDongle_1_MSGCNT 2
ZWDongle_1_RAWMSG 0049841e0d0420013060858e7270867aef2b
ZWDongle_1_TIME 2021-01-12 20:21:57
ZWaveSubDevice no
cmdsPending 0
homeId fb9e5178
isWakeUp
lastMsgSent 1610479183.515
nodeIdHex 1e
READINGS:
2021-01-12 20:21:57 CMD ZW_APPLICATION_UPDATE
2021-01-12 20:10:40 associatedWith ZWave_SENSOR_BINARY_30.01,ZWave_SENSOR_BINARY_30.02,ZWave_SENSOR_MULTILEVEL_30.03
2021-01-12 19:49:22 mcCapability_01 SENSOR_BINARY SENSOR_ALARM
2021-01-12 19:49:22 mcCapability_02 SENSOR_BINARY SENSOR_ALARM
2021-01-12 19:49:21 mcEndpoints total 2, identical
2021-01-12 20:19:43 model FIBARO System FGBS001 Universal Binary Sensor
2021-01-12 20:19:43 modelConfig fibaro/fgbs001.xml
2021-01-12 20:19:43 modelId 010f-0501-1002
2021-01-12 20:19:43 state associationAdd 3 1
2021-01-12 20:19:43 timeToAck 0.042
2021-01-12 20:19:43 transmit OK
Attributes:
IODev ZWDongle_1
classes SENSOR_BINARY MULTI_CHANNEL ASSOCIATION MULTI_CHANNEL_ASSOCIATION MANUFACTURER_SPECIFIC CONFIGURATION VERSION FIRMWARE_UPDATE_MD MARK SCENE_ACTIVATION
room ZWave
vclasses ASSOCIATION:2 CONFIGURATION:1 FIRMWARE_UPDATE_MD:1 MULTI_CHANNEL:2 MULTI_CHANNEL_ASSOCIATION:2 SCENE_ACTIVATION:1 VERSION:1
Auch ein Get Model scheint ok:
modelConfig:fibaro/fgbs001.xml
model:FIBARO System FGBS001 Universal Binary Sensor
modelId:010f-0501-1002
Was mir fehlt (jedoch beim vorherigen Stick (der übrigens für alle anderen Sensoren einwandfrei funktionierte) sind
wie unten die DeviceChilds 3.. aufwärts. Im Augenblick werden nur DeviceChilds 1,2 angezeigt.
Mache ich da was falsch? Was kann ich noch tun?
setuuid ZWave_SENSOR_BINARY_46.01 5d3c7aa8-f33f-b8ba-5840-a3a8c9debe568291
attr ZWave_SENSOR_BINARY_46.01 DbLogExclude .*
attr ZWave_SENSOR_BINARY_46.01 IODev ZWDongle_1
attr ZWave_SENSOR_BINARY_46.01 classes SENSOR_BINARY SENSOR_ALARM UNKNOWN_02
attr ZWave_SENSOR_BINARY_46.01 group Grp-Schalter
attr ZWave_SENSOR_BINARY_46.01 room 3.0_UG_HeizungsKeller
define ZWave_SENSOR_BINARY_46.02 ZWave d6b4118c 11778
setuuid ZWave_SENSOR_BINARY_46.02 5d3c7aa8-f33f-b8ba-7168-fea933ef9cd5b4cd
attr ZWave_SENSOR_BINARY_46.02 DbLogExclude .*
attr ZWave_SENSOR_BINARY_46.02 IODev ZWDongle_1
attr ZWave_SENSOR_BINARY_46.02 classes SENSOR_BINARY SENSOR_ALARM
attr ZWave_SENSOR_BINARY_46.02 group Grp-Schalter
attr ZWave_SENSOR_BINARY_46.02 room 3.0_UG_HeizungsKeller
define ZWave_SENSOR_MULTILEVEL_46.03 ZWave d6b4118c 11779
setuuid ZWave_SENSOR_MULTILEVEL_46.03 5d3c7aa8-f33f-b8ba-26c4-436f3303a3448d1b
attr ZWave_SENSOR_MULTILEVEL_46.03 DbLogExclude .*
attr ZWave_SENSOR_MULTILEVEL_46.03 DbLogInclude temperature
attr ZWave_SENSOR_MULTILEVEL_46.03 IODev ZWDongle_1
attr ZWave_SENSOR_MULTILEVEL_46.03 alias UG.HzK.Puffersp_Unten
attr ZWave_SENSOR_MULTILEVEL_46.03 classes SENSOR_MULTILEVEL
attr ZWave_SENSOR_MULTILEVEL_46.03 group Grp-Sensor
attr ZWave_SENSOR_MULTILEVEL_46.03 icon sani_buffer_temp_down
attr ZWave_SENSOR_MULTILEVEL_46.03 room 9.6.3_ZWave
define ZWave_SENSOR_MULTILEVEL_46.04 ZWave d6b4118c 11780
setuuid ZWave_SENSOR_MULTILEVEL_46.04 5d3cac7b-f33f-b8ba-dfbf-aca4fd75daf09f4a
attr ZWave_SENSOR_MULTILEVEL_46.04 DbLogExclude .*
attr ZWave_SENSOR_MULTILEVEL_46.04 IODev ZWDongle_1
attr ZWave_SENSOR_MULTILEVEL_46.04 alias UG.HzK.Puffersp_Mitte
attr ZWave_SENSOR_MULTILEVEL_46.04 classes SENSOR_MULTILEVEL
attr ZWave_SENSOR_MULTILEVEL_46.04 group Grp-Sensor
attr ZWave_SENSOR_MULTILEVEL_46.04 icon sani_buffer_temp_all
attr ZWave_SENSOR_MULTILEVEL_46.04 room 9.6.3_ZWave
#attr ZWave_SENSOR_MULTILEVEL_46.04 DbLogInclude temperature
define ZWave_SENSOR_MULTILEVEL_46.05 ZWave d6b4118c 11781
setuuid ZWave_SENSOR_MULTILEVEL_46.05 5d3c7aa9-f33f-b8ba-0349-c033d25a953c0edd
attr ZWave_SENSOR_MULTILEVEL_46.05 DbLogExclude .*
attr ZWave_SENSOR_MULTILEVEL_46.05 IODev ZWDongle_1
attr ZWave_SENSOR_MULTILEVEL_46.05 alias UG.HzK.Puffersp_Oben
attr ZWave_SENSOR_MULTILEVEL_46.05 classes SENSOR_MULTILEVEL
attr ZWave_SENSOR_MULTILEVEL_46.05 group Grp-Sensor
attr ZWave_SENSOR_MULTILEVEL_46.05 icon sani_buffer_temp_up
attr ZWave_SENSOR_MULTILEVEL_46.05 room 9.6.3_ZWave
#attr ZWave_SENSOR_MULTILEVEL_46.05 DbLogInclude temperature
define di_ZWave_SENSOR_MULTILEVEL_46.05_monitor DOIF ([+12:00] and [ZWave_SENSOR_MULTILEVEL_46.05:temperature:sec]>3600)(set teleBotAK\
msg @Andreas_Krause ACHTUNG: UG.HzK.Puffersp_Oben liefert keine Daten mehr)
setuuid di_ZWave_SENSOR_MULTILEVEL_46.05_monitor 5dd83169-f33f-b8ba-ba00-ca9c788a8777ef99
attr di_ZWave_SENSOR_MULTILEVEL_46.05_monitor DbLogExclude .*
attr di_ZWave_SENSOR_MULTILEVEL_46.05_monitor do always
attr di_ZWave_SENSOR_MULTILEVEL_46.05_monitor group Grp-System-DoIf
attr di_ZWave_SENSOR_MULTILEVEL_46.05_monitor icon helper_doif
attr di_ZWave_SENSOR_MULTILEVEL_46.05_monitor room 9.6_System
define ZWave_SENSOR_MULTILEVEL_46.06 ZWave d6b4118c 11782
setuuid ZWave_SENSOR_MULTILEVEL_46.06 5d3c7aa9-f33f-b8ba-d66e-5b49e00e8e23eeb8
attr ZWave_SENSOR_MULTILEVEL_46.06 DbLogExclude .*
attr ZWave_SENSOR_MULTILEVEL_46.06 IODev ZWDongle_1
attr ZWave_SENSOR_MULTILEVEL_46.06 alias UG.HzK.Puffersp_Warmwasser
attr ZWave_SENSOR_MULTILEVEL_46.06 classes SENSOR_MULTILEVEL
attr ZWave_SENSOR_MULTILEVEL_46.06 group Grp-Sensor
attr ZWave_SENSOR_MULTILEVEL_46.06 icon sani_floor_heating
attr ZWave_SENSOR_MULTILEVEL_46.06 room 9.6.3_ZWave
#attr ZWave_SENSOR_MULTILEVEL_46.06 DbLogInclude temperature