Hallo zusammen,
es gab Zeiten, da hatte ich an einem Tag nicht mehr als 5 Freezes, heute sind bis zur aktuellen Zeit 87 Freezes.
Jeder einzelne Freeze ist weiter nicht lange, aber die Summe macht es nicht besser.
Ich hab mal nur die Freezes aus der log-Datei rauskopiert.
Kann man dagegen überhaupt etwas machen?
Häufig taucht etwas mit "HandSendQueue" auf.
Viele Grüße Gisbert
2021.03.21 00:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 00:01:45, delay is 1.056 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 00:31:46 3: [Freezemon] myFreezemon: possible freeze starting at 00:31:45, delay is 1.088 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 00:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 00:41:45, delay is 1.082 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 00:51:48 3: [Freezemon] myFreezemon: possible freeze starting at 00:51:47, delay is 1.025 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 01:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 01:01:45, delay is 1.332 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 01:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 01:05:37, delay is 1.095 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 01:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 01:11:45, delay is 1.092 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 01:31:46 3: [Freezemon] myFreezemon: possible freeze starting at 01:31:45, delay is 1.022 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 01:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 01:35:37, delay is 1.083 possibly caused by: tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HttpUtils_Err(N/A)
2021.03.21 01:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 01:41:45, delay is 1.129 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 02:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 02:05:37, delay is 1.297 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 02:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 02:35:37, delay is 1.13 possibly caused by: no bad guy found :-(
2021.03.21 02:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 02:41:45, delay is 1.04 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 02:51:48 3: [Freezemon] myFreezemon: possible freeze starting at 02:51:47, delay is 1.099 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2)
2021.03.21 03:01:49 3: [Freezemon] myFreezemon: possible freeze starting at 03:01:48, delay is 1.137 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HttpUtils_Err(N/A)
2021.03.21 03:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 03:05:37, delay is 1.086 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 03:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 03:35:37, delay is 1.826 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 03:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 03:41:45, delay is 1.253 possibly caused by: tmr-SamsungAV_Init(SamsungTV) tmr-SiSi_MessageDaemonWatchdog(Signal) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 03:51:48 3: [Freezemon] myFreezemon: possible freeze starting at 03:51:47, delay is 1.165 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 04:21:48 3: [Freezemon] myFreezemon: possible freeze starting at 04:21:47, delay is 1.057 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-SIP_watch_listen(N/A) tmr-SYSSTAT_GetUpdate(TrafficUnifiWan) tmr-CODE(0x55c158c1d488)(SIGNALduino_KeepAlive) tmr-CODE(0x55c158c1d488)(SIGNALduino_KeepAlive) tmr-SYSMON_Update(T610.Sysmon) tmr-MQTT::Timer(MyBroker) tmr-SamsungAV_Init(SamsungTV) tmr-SiSi_MessageDaemonWatchdog(Signal)
2021.03.21 04:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 04:35:37, delay is 1.069 possibly caused by: no bad guy found :-(
2021.03.21 04:51:47 3: [Freezemon] myFreezemon: possible freeze starting at 04:51:46, delay is 1.648 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-BlockingKill(N/A)
2021.03.21 05:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 05:05:37, delay is 1.143 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 05:11:47 3: [Freezemon] myFreezemon: possible freeze starting at 05:11:46, delay is 1.582 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 05:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 05:35:37, delay is 1.044 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 05:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 05:51:45, delay is 1.279 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 06:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 06:05:37, delay is 1.018 possibly caused by: tmr-HttpUtils_Err(N/A) tmr-HttpUtils_Err(N/A)
2021.03.21 06:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 06:35:37, delay is 1.543 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 06:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 06:41:45, delay is 1.01 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 06:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 06:51:45, delay is 1.14 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 07:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 07:01:45, delay is 1.074 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 07:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 07:11:45, delay is 1.242 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 07:31:46 3: [Freezemon] myFreezemon: possible freeze starting at 07:31:45, delay is 1.152 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 07:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 07:35:37, delay is 1.128 possibly caused by: tmr-DOIF_SleepTrigger(Haushaltsraum.Lueftung) tmr-HttpUtils_Err(N/A) tmr-HMUARTLGW_CheckCmdResp(myHmUARTLGW2)
2021.03.21 07:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 07:41:45, delay is 1.277 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 08:00:02 3: [Freezemon] myFreezemon: possible freeze starting at 08:00:01, delay is 1.2 possibly caused by: tmr-HourCounter_Run(N/A) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c157d03a40)(dnsQuery)
2021.03.21 08:00:34 3: [Freezemon] myFreezemon: possible freeze starting at 08:00:33, delay is 1.087 possibly caused by: no bad guy found :-(
2021.03.21 08:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 08:01:45, delay is 1.22 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 08:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 08:05:37, delay is 1.265 possibly caused by: tmr-SiSi_MessageDaemonWatchdog(Signal) tmr-HttpUtils_Err(N/A)
2021.03.21 08:21:46 3: [Freezemon] myFreezemon: possible freeze starting at 08:21:45, delay is 1.022 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 08:31:47 3: [Freezemon] myFreezemon: possible freeze starting at 08:31:46, delay is 1.291 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 08:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 08:51:45, delay is 1.009 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 09:01:47 3: [Freezemon] myFreezemon: possible freeze starting at 09:01:46, delay is 1.339 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 09:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 09:11:45, delay is 1.024 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 09:31:47 3: [Freezemon] myFreezemon: possible freeze starting at 09:31:46, delay is 1.299 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 09:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 09:35:37, delay is 1.17 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 09:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 09:41:45, delay is 1.47 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 09:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 09:51:45, delay is 1.063 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 10:15:20 3: [Freezemon] myFreezemon: possible freeze starting at 10:15:19, delay is 1.095 possibly caused by: no bad guy found :-(
2021.03.21 10:21:46 3: [Freezemon] myFreezemon: possible freeze starting at 10:21:45, delay is 1.079 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 10:31:46 3: [Freezemon] myFreezemon: possible freeze starting at 10:31:45, delay is 1.129 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 10:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 10:35:37, delay is 1.039 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 10:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 10:41:45, delay is 1.042 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 11:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 11:05:37, delay is 1.182 possibly caused by: tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-HttpUtils_Err(N/A)
2021.03.21 11:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 11:11:45, delay is 1.205 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 11:21:46 3: [Freezemon] myFreezemon: possible freeze starting at 11:21:45, delay is 1.544 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 11:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 11:35:37, delay is 1.011 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 12:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 12:01:45, delay is 1.164 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 12:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 12:11:45, delay is 1.066 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 12:31:48 3: [Freezemon] myFreezemon: possible freeze starting at 12:31:47, delay is 1.499 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HttpUtils_Err(N/A)
2021.03.21 12:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 12:35:37, delay is 1.433 possibly caused by: tmr-Unifi_DoUpdate(myUniFi) tmr-HttpUtils_Err(N/A)
2021.03.21 12:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 12:51:45, delay is 1.046 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 13:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 13:01:45, delay is 1.052 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 13:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 13:05:37, delay is 1.045 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 13:11:46 3: [Freezemon] myFreezemon: possible freeze starting at 13:11:45, delay is 1.467 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 13:41:46 3: [Freezemon] myFreezemon: possible freeze starting at 13:41:45, delay is 1.016 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 13:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 13:51:45, delay is 1.459 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 14:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 14:05:37, delay is 1.549 possibly caused by: tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2)
2021.03.21 14:11:48 3: [Freezemon] myFreezemon: possible freeze starting at 14:11:47, delay is 1.398 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HttpUtils_Err(N/A)
2021.03.21 14:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 14:35:37, delay is 1.085 possibly caused by: no bad guy found :-(
2021.03.21 14:51:48 3: [Freezemon] myFreezemon: possible freeze starting at 14:51:47, delay is 1.192 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HttpUtils_Err(N/A)
2021.03.21 15:02:51 3: [Freezemon] myFreezemon: possible freeze starting at 15:02:50, delay is 1.038 possibly caused by: no bad guy found :-(
2021.03.21 15:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 15:05:37, delay is 1.032 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 15:31:46 3: [Freezemon] myFreezemon: possible freeze starting at 15:31:45, delay is 1.115 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 15:35:38 3: [Freezemon] myFreezemon: possible freeze starting at 15:35:37, delay is 1.303 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 15:51:19 3: [Freezemon] myFreezemon: possible freeze starting at 15:51:18, delay is 1.566 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-Unifi_DoUpdate(myUniFi)
2021.03.21 16:01:46 3: [Freezemon] myFreezemon: possible freeze starting at 16:01:45, delay is 1.556 possibly caused by: tmr-SIP_watch_listen(N/A) tmr-SYSSTAT_GetUpdate(TrafficUnifiWan) tmr-CODE(0x55c158c1d488)(SIGNALduino_KeepAlive) tmr-CODE(0x55c158c1d488)(SIGNALduino_KeepAlive) tmr-SYSMON_Update(T610.Sysmon) tmr-FHEM::readingsWatcher::OnTimer(myreadingsWatcher) tmr-MQTT::Timer(MyBroker) tmr-SamsungAV_Init(SamsungTV) tmr-SiSi_MessageDaemonWatchdog(Signal) tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 16:05:38 3: [Freezemon] myFreezemon: possible freeze starting at 16:05:37, delay is 1.046 possibly caused by: tmr-HttpUtils_Err(N/A)
2021.03.21 16:11:47 3: [Freezemon] myFreezemon: possible freeze starting at 16:11:46, delay is 1.765 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-MQTT::Timer(MyBroker) tmr-SamsungAV_Init(SamsungTV) tmr-SiSi_MessageDaemonWatchdog(Signal) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2)
2021.03.21 16:21:46 3: [Freezemon] myFreezemon: possible freeze starting at 16:21:45, delay is 1.362 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-FHEM::readingsWatcher::OnTimer(myreadingsWatcher) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 16:24:34 3: [Freezemon] myFreezemon: possible freeze starting at 16:24:30, delay is 4.838 possibly caused by: no bad guy found :-(
2021.03.21 16:31:48 3: [Freezemon] myFreezemon: possible freeze starting at 16:31:45, delay is 3.312 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 16:31:51 3: [Freezemon] myFreezemon: possible freeze starting at 16:31:50, delay is 1.015 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 16:31:53 3: [Freezemon] myFreezemon: possible freeze starting at 16:31:52, delay is 1.107 possibly caused by: tmr-HMUARTLGW_CheckCredits(myHmUARTLGW1) tmr-HMUARTLGW_CheckCredits(myHmUARTLGW2) tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-HttpUtils_Err(N/A)
2021.03.21 16:51:46 3: [Freezemon] myFreezemon: possible freeze starting at 16:51:45, delay is 1.049 possibly caused by: tmr-CODE(0x55c157d03a40)(dnsQuery) tmr-CODE(0x55c15c18bed0)(HandleSendQueue)
2021.03.21 17:01:47 3: [Freezemon] myFreezemon: possible freeze starting at 17:01:46, delay is 1.064 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-BlockingKill(N/A)
2021.03.21 17:11:48 3: [Freezemon] myFreezemon: possible freeze starting at 17:11:47, delay is 1.086 possibly caused by: tmr-CODE(0x55c15c18bed0)(HandleSendQueue) tmr-BlockingKill(N/A)
und
Zitattmr-CODE(0x55c157d03a40)(dnsQuery)
global dnsserver gesetzt ? Sonst einen nicht erreichbaren DNS ?
<OT> Was machen Hecke, DLNA, Meeting ? ;) <OT>
Grüße Markus
Dass dnsQuery einen Freeze verursacht, halte ich fuer einen Messfehler.
Es sei denn, man zeigt mir, wie ich es Nachstellen kann.
Gisbert,
ist Dir der 10-minütige Rhythmus aufgefallen ?
GrüßeMarkus
Zitat von: KölnSolar am 21 März 2021, 21:48:47
Gisbert,
ist Dir der 10-minütige Rhythmus aufgefallen ?
GrüßeMarkus
Hallo Markus,
ja, ist mir aufgefallen.
Es dürfte aber aufwändig werden, den Übeltäter zu finden, da ich nicht nur Fhem durchforsten muss, sondern jedes einzelne physische Gerät. Ich werde es dann mal angehen, wenn ich Zeit finde.
global dnsserver gesetzt? Ja ist gesetzt, 127.0.0.1, es läuft auf dem gleichen Server auch Pi-hole.
Viele Grüße Gisbert
OT:
Hecke rechtzeitig vor dem 1. März masakriert.
puh DLNA, die Beiträge in deinem Thread haben mich echt erschreckt, ich bin noch nicht bereit mir das anzutun :o
Treffen: bisher keine Antwort
Hallo Rudi,
hallo Markus,
ich konnte zumindest das Device finden, das ursächlich beteiligt ist.
Es ist vom TYPE HTTPMOD, bei dem ich Börsenindikatoren im 10 Minutentakt (tagsüber) lade. Bevor Kritik kommt, mit Hausautomation hat es ja nichts zu tun, aber schön, dass es funktioniert.
Wie kann ich dieses Device in Griff bekommen, außer ohne es zu löschen?
Hier list des Devices:
Internals:
BUSY 0
CFGFN ./FHEM/Finanzdaten.cfg
DEF https://www.tagesschau.de/wirtschaft/boersenkurse/ 600
FUUID 5eb660c8-f33f-e986-feed-143cad5ec4289aea
Interval 600
MainURL https://www.tagesschau.de/wirtschaft/boersenkurse/
ModuleVersion 4.1.06 - 20.3.2021
NAME Indizes_ARD
NOTIFYDEV global
NR 459
NTFY_ORDER 50-Indizes_ARD
STATE Dax: 15008 (-0.00%)
Dow Jones: 33099 (0.11%)
Euro Stoxx 50: 3931 (0.17%)
Nasdaq 100: 13106 (1.70%)
TYPE HTTPMOD
value
HttpUtils:
NAME
addr https://www.tagesschau.de:443
auth 0
code 200
compress 1
conn
data
displayurl https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
header
host www.tagesschau.de
httpheader HTTP/1.0 200 OK
Content-Encoding: gzip
Last-Modified: Wed, 31 Mar 2021 18:41:46 GMT
Content-Type: text/html; charset=UTF-8
Pragma: no-cache
x-usf-cache: MISS
x-usf-cachen: 55
x-xss-protection: 1; mode=block
x-content-type-options: nosniff
Cache-Control: no-cache
Expires: Wed, 31 Mar 2021 18:41:47 GMT
Date: Wed, 31 Mar 2021 18:41:47 GMT
Connection: close
Vary: Accept-Encoding
Access-Control-Allow-Origin: *
httpversion 1.0
hu_blocking 0
hu_filecount 1
hu_port 443
hu_portSfx
ignoreredirects 1
loglevel 4
path /wirtschaft/boersenkurse/dax-index-846900/
protocol https
redirects 0
timeout 5
url https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
sslargs:
QUEUE:
READINGS:
2021-03-31 20:41:44 dax 15008
2021-03-31 20:41:44 dax_perc -0.00
2021-03-31 20:41:44 dow_jones 33099
2021-03-31 20:41:44 dow_jones_perc 0.11
2021-03-31 20:41:44 euro_stoxx_50 3931
2021-03-31 20:41:44 euro_stoxx_50_perc 0.17
2021-03-31 20:41:46 nasdaq_100 13106
2021-03-31 20:41:47 nasdaq_100_perc 1.70
REQUEST:
context get
data
header
ignoreredirects 0
num 08
retryCount 0
type get08
url https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
defptr:
readingBase:
dax reading
dax_perc reading
dow_jones reading
dow_jones_perc reading
euro_stoxx_50 reading
euro_stoxx_50_perc reading
nasdaq_100 get
nasdaq_100_perc get
readingNum:
dax 01
dax_perc 05
dow_jones 02
dow_jones_perc 06
euro_stoxx_50 03
euro_stoxx_50_perc 07
nasdaq_100 04
nasdaq_100_perc 08
readingOutdated:
requestReadings:
get04:
nasdaq_100 get 04
get08:
nasdaq_100_perc get 08
update:
dax reading 01
dax_perc reading 05
dow_jones reading 02
dow_jones_perc reading 06
euro_stoxx_50 reading 03
euro_stoxx_50_perc reading 07
helper:
bm:
CODE(0x557debb3c730):
cnt 68
dmx -1000
dtot 0
dtotcnt 0
mTS 28.03. 11:29:36
max 0.0146338939666748
tot 0.0583572387695312
mAr:
HASH(0x557def8dba38)
Indizes_ARD
?
CODE(0x557debbdd488):
cnt 3
dmx -1000
dtot 0
dtotcnt 0
mTS 31.03. 20:43:12
max 0.000124931335449219
tot 0.000361919403076172
mAr:
HASH(0x557def8dba38)
Indizes_ARD
?
CODE(0x557debc3f288):
cnt 28
dmx -1000
dtot 0
dtotcnt 0
mTS 31.03. 08:23:01
max 0.000174999237060547
tot 0.000750064849853516
mAr:
HASH(0x557def8dba38)
HASH(0x557de6540f18)
lastpoll:
nasdaq_100 1617216104.00223
nasdaq_100_perc 1617216104.00223
Attributes:
alias tagesschau.de
alignTime 00:01:44
event-min-interval .*:1800
event-on-change-reading .*
get04Format %.0f
get04Name nasdaq_100
get04OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
get04Poll 1
get04URL https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
get04XPath //li[contains(.,'NASDAQ')]/span[@class="price"]
get08Name nasdaq_100_perc
get08OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
get08Poll 1
get08URL https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
get08XPath //li[contains(.,'NASDAQ')]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
group Index
reading01Format %.0f
reading01Name dax
reading01OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading01XPath //li[contains(.,'DAX') and not(contains(.,'MDAX'))]/span[@class="price"]
reading02Format %.0f
reading02Name dow_jones
reading02OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading02XPath //li[contains(.,'DOW JONES')]/span[@class="price"]
reading03Format %.0f
reading03Name euro_stoxx_50
reading03OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading03XPath //li[contains(.,'E-STOXX 50')]/span[@class="price"]
reading05Name dax_perc
reading05OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading05XPath //li[contains(.,'DAX') and not(contains(.,'MDAX'))]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
reading06Name dow_jones_perc
reading06OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading06XPath //li[contains(.,'DOW JONES')]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
reading07Name euro_stoxx_50_perc
reading07OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading07XPath //li[contains(.,'E-STOXX 50')]//span[(@class="change cf pos" or @class="change cf neg")]/span[contains(.,"%")]
room Finance
sortby 1
stateFormat Dax: [$name:dax] ([$name:dax_perc]%)
Dow Jones: [$name:dow_jones] ([$name:dow_jones_perc]%)
Euro Stoxx 50: [$name:euro_stoxx_50] ([$name:euro_stoxx_50_perc]%)
Nasdaq 100: [$name:nasdaq_100] ([$name:nasdaq_100_perc]%)
timeout 5
userattr get04Poll:0,1 get08Poll:0,1
verbose 0
OT
@Markus, Respekt, wie du den Fehler bei deinem Garagentor gefunden hast.
Viele Grüße Gisbert
Hi Gisbert,
httpmod ist nicht mein Thema. Da müssen andere ran. Einzige Idee: ohne Verschlüsselung, also http, um etwas traffic zu sparen. Ist ja nichts "geheimes".
ZitatOT
@Markus, Respekt, wie du den Fehler bei deinem Garagentor gefunden hast.
Naja, dämlich, wie ich es überhaupt zerstört hatte. ::) Aber ich hab wieder ne Menge gelernt und die Steuerung ist besser als vorher. Insbesondere der Blockierschutz. Nun dürfte auch eine versehentliche Schließung ein unter dem Carport geparktes Auto nicht beschädigen. 8)
Grüße Markus
Hallo Stefan,
kannst du dir das HTTPMOD-Device anschauen, das bei jedem Update (tagsüber alle 10 Minuten) ein Freeze erzeugt?
Internals:
BUSY 0
CFGFN ./FHEM/Finanzdaten.cfg
DEF https://www.tagesschau.de/wirtschaft/boersenkurse/ 600
FUUID 5eb660c8-f33f-e986-feed-143cad5ec4289aea
Interval 600
MainURL https://www.tagesschau.de/wirtschaft/boersenkurse/
ModuleVersion 4.1.06 - 20.3.2021
NAME Indizes_ARD
NOTIFYDEV global
NR 459
NTFY_ORDER 50-Indizes_ARD
STATE Dax: 15008 (-0.00%)
Dow Jones: 33099 (0.11%)
Euro Stoxx 50: 3931 (0.17%)
Nasdaq 100: 13106 (1.70%)
TYPE HTTPMOD
value
HttpUtils:
NAME
addr https://www.tagesschau.de:443
auth 0
code 200
compress 1
conn
data
displayurl https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
header
host www.tagesschau.de
httpheader HTTP/1.0 200 OK
Content-Encoding: gzip
Last-Modified: Wed, 31 Mar 2021 18:41:46 GMT
Content-Type: text/html; charset=UTF-8
Pragma: no-cache
x-usf-cache: MISS
x-usf-cachen: 55
x-xss-protection: 1; mode=block
x-content-type-options: nosniff
Cache-Control: no-cache
Expires: Wed, 31 Mar 2021 18:41:47 GMT
Date: Wed, 31 Mar 2021 18:41:47 GMT
Connection: close
Vary: Accept-Encoding
Access-Control-Allow-Origin: *
httpversion 1.0
hu_blocking 0
hu_filecount 1
hu_port 443
hu_portSfx
ignoreredirects 1
loglevel 4
path /wirtschaft/boersenkurse/dax-index-846900/
protocol https
redirects 0
timeout 5
url https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
sslargs:
QUEUE:
READINGS:
2021-03-31 20:41:44 dax 15008
2021-03-31 20:41:44 dax_perc -0.00
2021-03-31 20:41:44 dow_jones 33099
2021-03-31 20:41:44 dow_jones_perc 0.11
2021-03-31 20:41:44 euro_stoxx_50 3931
2021-03-31 20:41:44 euro_stoxx_50_perc 0.17
2021-03-31 20:41:46 nasdaq_100 13106
2021-03-31 20:41:47 nasdaq_100_perc 1.70
REQUEST:
context get
data
header
ignoreredirects 0
num 08
retryCount 0
type get08
url https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
defptr:
readingBase:
dax reading
dax_perc reading
dow_jones reading
dow_jones_perc reading
euro_stoxx_50 reading
euro_stoxx_50_perc reading
nasdaq_100 get
nasdaq_100_perc get
readingNum:
dax 01
dax_perc 05
dow_jones 02
dow_jones_perc 06
euro_stoxx_50 03
euro_stoxx_50_perc 07
nasdaq_100 04
nasdaq_100_perc 08
readingOutdated:
requestReadings:
get04:
nasdaq_100 get 04
get08:
nasdaq_100_perc get 08
update:
dax reading 01
dax_perc reading 05
dow_jones reading 02
dow_jones_perc reading 06
euro_stoxx_50 reading 03
euro_stoxx_50_perc reading 07
helper:
bm:
CODE(0x557debb3c730):
cnt 68
dmx -1000
dtot 0
dtotcnt 0
mTS 28.03. 11:29:36
max 0.0146338939666748
tot 0.0583572387695312
mAr:
HASH(0x557def8dba38)
Indizes_ARD
?
CODE(0x557debbdd488):
cnt 3
dmx -1000
dtot 0
dtotcnt 0
mTS 31.03. 20:43:12
max 0.000124931335449219
tot 0.000361919403076172
mAr:
HASH(0x557def8dba38)
Indizes_ARD
?
CODE(0x557debc3f288):
cnt 28
dmx -1000
dtot 0
dtotcnt 0
mTS 31.03. 08:23:01
max 0.000174999237060547
tot 0.000750064849853516
mAr:
HASH(0x557def8dba38)
HASH(0x557de6540f18)
lastpoll:
nasdaq_100 1617216104.00223
nasdaq_100_perc 1617216104.00223
Attributes:
alias tagesschau.de
alignTime 00:01:44
event-min-interval .*:1800
event-on-change-reading .*
get04Format %.0f
get04Name nasdaq_100
get04OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
get04Poll 1
get04URL https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
get04XPath //li[contains(.,'NASDAQ')]/span[@class="price"]
get08Name nasdaq_100_perc
get08OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
get08Poll 1
get08URL https://www.tagesschau.de/wirtschaft/boersenkurse/dax-index-846900/
get08XPath //li[contains(.,'NASDAQ')]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
group Index
reading01Format %.0f
reading01Name dax
reading01OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading01XPath //li[contains(.,'DAX') and not(contains(.,'MDAX'))]/span[@class="price"]
reading02Format %.0f
reading02Name dow_jones
reading02OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading02XPath //li[contains(.,'DOW JONES')]/span[@class="price"]
reading03Format %.0f
reading03Name euro_stoxx_50
reading03OExpr $val =~ s/\.//g; $val =~ s/\,/./g; $val
reading03XPath //li[contains(.,'E-STOXX 50')]/span[@class="price"]
reading05Name dax_perc
reading05OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading05XPath //li[contains(.,'DAX') and not(contains(.,'MDAX'))]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
reading06Name dow_jones_perc
reading06OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading06XPath //li[contains(.,'DOW JONES')]//span[@class="change cf pos" or @class="change cf neg"]/span[contains(.,"%")]
reading07Name euro_stoxx_50_perc
reading07OExpr $val =~ s/\,/./g; $val =~ s/\+//g; $val =~ s/\%//g; $val
reading07XPath //li[contains(.,'E-STOXX 50')]//span[(@class="change cf pos" or @class="change cf neg")]/span[contains(.,"%")]
room Finance
sortby 1
stateFormat Dax: [$name:dax] ([$name:dax_perc]%)
Dow Jones: [$name:dow_jones] ([$name:dow_jones_perc]%)
Euro Stoxx 50: [$name:euro_stoxx_50] ([$name:euro_stoxx_50_perc]%)
Nasdaq 100: [$name:nasdaq_100] ([$name:nasdaq_100_perc]%)
timeout 5
userattr get04Poll:0,1 get08Poll:0,1
verbose 0Viele Grüße Gisbert
OT:
@Markus
ZitatInsbesondere der Blockierschutz. Nun dürfte auch eine versehentliche Schließung ein unter dem Carport geparktes Auto nicht beschädigen. 8)
Das interessiert mich auch, wie hast du das realisiert?
<OT>
Hier findest Du den Originalschaltplan (https://forum.fhem.de/index.php/topic,119628.msg1140952.html#msg1140952). Die Elektronik war bereits vorhanden. Es ist der Shunt-Widerstand 13, dessen Spannungsabfall dann über den OpAmp(Eingang 5) verstärkt u. an Ausgang 7 am µC gemessen wird. Mit dem neuen attiny habe ich dann diese Spannung "ausgelesen"(AD-Wandler). Ein sinnvolles Maximum hab ich dann per trial&error ermittelt.
Im Programmablauf warte ich einen Augenblick(Einschaltstrom), messe dann zur Ermittlung eines Vergleichswerts. Ist dieser größer als das Maximum, wird das Maximum zum Vergleichswert. Den Vergleichswert noch um einen per trial&error ermittelten Aufschlag erhöht.
Nun wird permanent gemessen. Bei Überschreiten des Vergleichswerts wird abgeschaltet.
So hab ich es geschafft, dass das Tor gerade so durchläuft, aber relativ schnell(sanft) stoppt, wenn ein größerer mechanischer Widerstand auftritt.
Grüße Markus
Hallo Gisbert,
Du könntest folgendes probieren:
1) bei dem verdächtigen HTTPMOD-Device mal die xpath-Attribute entfernen. Wenn dann die Freezes weg sind, liegt es am Parsen.
2) Verbose 5 für das Device und global mseclog 1 setzen. Dann einen Auszug aus dem Log posten. Dann müsste man sehen, wo die Zeit verloren geht.
Gruss
Stefan
Hallo Stefan,
ad 1) xpath-Attribute könnte ich entfernen, müsste mir dann aber die passenden Regex zusammensuchen (mit trial-and-error, zu mehr reicht es leider nicht (mehr) ???), d.h. das werde ich dann später angehen.
ad 2) ich wollte den log-Auszug hier reinkopieren, dabei hätte ich fast einen Krampf in die Hand bekommen, soviel kommt da an. Ich hab es dann anders herum gemacht und die paar Zeilen am Anfang und Ende der Logdatei gelöscht und hänge den Auszug an. Es handelt sich um 2 Updates, einmal händisch per reread und einmal per Intervaltimer.
Wenn es keine einfache Lösung gibt? Dann wäre ich geneigt auf Regex umzustellen oder eine andere Quelle zu suchen.
Gibt es Erfahrungen, wo man Börsenindices ohne Stress runterladen kann?
Viele Grüße Gisbert
Hallo Gisbert,
wenn Du die Zeitstempel im Log beim Parsen mal anschaust, dann entsteht die Verzögerung ganz offensichtlich während der Auswertung der XPaths...
Das ist einfach zu viel für die CPU ;-)
Vermutlich kann man das einfacher formulieren, aber für XPath bin ich kein Experte.
Gruss
Stefan
Hallo Stefan,
vielen Dank für deine Analyse.
Dann werde ich erst mal das Device stilllegen, bis ich eine bessere Lösung habe.
Falls jemand eine brauchbare Quelle für einen funktionierenden Download von gängigen Börsenindices hat, dann bekunde ich hiermit Interesse.
Viele Grüße Gisbert
Hallo Gisbert,
kennst Du das Modul STOCKQUOTES? Damit lassen sich Börseninformationen gut abrufen und oder readingsgroup darstellen. Es gibt im Forum auch einen entsprechenden Thread.
VG
Torsten