Hallo,
ich habe mir vor 2 Wochen einen SIGNALDuino auf ebay gekauft, installiert, Rolfs firmware draufgespielt und es lieft.
Meine SOMFY-Rollos konnte ich einwandfrei bedienen, die Fernbedienungen und Wandsender wurden erkannt - bis gestern.
Seit dem kommen die folgenden log-Einträge und das Device in fhem geht auf "closed".
2021.06.05 09:10:43.776 3: mySIGNALduino_WZ: ResetDevice, nanoCC1101
2021.06.05 09:10:43.777 3: Opening mySIGNALduino_WZ device /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0
2021.06.05 09:10:43.789 3: Setting mySIGNALduino_WZ serial parameters to 57600,8,N,1
2021.06.05 09:10:43.838 1: mySIGNALduino_WZ: DoInit, /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0@57600
2021.06.05 09:10:43.843 3: mySIGNALduino_WZ device opened
2021.06.05 09:10:47.196 3: mySIGNALduino_WZ: SimpleWrite_XQ, disable receiver (XQ)
2021.06.05 09:10:47.791 5: mySIGNALduino_WZ: SimpleWrite, XQ
2021.06.05 09:10:47.802 3: mySIGNALduino_WZ: StartInit, get version, retry = 0
2021.06.05 09:10:47.803 5: mySIGNALduino_WZ: SimpleWrite, V
2021.06.05 09:11:05.105 5: mySIGNALduino_WZ: CheckVersionResp, called without msg
2021.06.05 09:11:05.106 1: mySIGNALduino_WZ: CheckVersionResp, Not an SIGNALduino device, got for V: undef
2021.06.05 09:11:05.347 3: mySIGNALduino_WZ: StartInit, get version, retry = 1
2021.06.05 09:11:05.348 5: mySIGNALduino_WZ: SimpleWrite, V
2021.06.05 09:11:15.383 5: mySIGNALduino_WZ: CheckVersionResp, called without msg
2021.06.05 09:11:15.383 1: mySIGNALduino_WZ: CheckVersionResp, Not an SIGNALduino device, got for V: undef
2021.06.05 09:11:15.384 3: mySIGNALduino_WZ: StartInit, get version, retry = 2
2021.06.05 09:11:15.384 5: mySIGNALduino_WZ: SimpleWrite, V
2021.06.05 09:11:27.271 5: mySIGNALduino_WZ: CheckVersionResp, called without msg
2021.06.05 09:11:27.273 1: mySIGNALduino_WZ: CheckVersionResp, Not an SIGNALduino device, got for V: undef
2021.06.05 09:11:27.276 3: mySIGNALduino_WZ: StartInit, get version, retry = 3
2021.06.05 09:11:27.276 2: mySIGNALduino_WZ: StartInit, retry count reached. Reset
2021.06.05 09:11:27.277 3: mySIGNALduino_WZ: ResetDevice, nanoCC1101
Weder ein reboot noch ein An-/Abstecken des Geräts ändert viel.
Manchmal läuft der Stick dann ein paar Minuten, dann beginnt das Spiel von vorne.
Heißt das, der Stick ist kaputt?
Ach ja, hier noch ein list des Devices:
Save config ?
Floorplans
Alarmanlage
0_Testing
Anwesenheiten
Badezimmer
Berker
Bewässerung
Büro
CUL_HM
Chatten
ESPEasy
Esszimmer
Fernbedienung
Gästebad
Gästezimmer
HUEDevice
Haushaltsgeräte
Homekit
Internet
Kinderzimmer
Küche
Multimedia
Plots
Rollos
SOMFY
Schlafzimmer
Schrankräume
Shelly
Taubenabwehr
Terrasse_Ost
Terrasse_West
Unsorted
Vorzimmer
WCs
Weihnachten
Wetter
Wohnzimmer
Z_System
Zeitschaltuhr
Zentrale
backup
icoEverything Everything
Logfile
Commandref
Remote doc
Edit files
Select style
Event monitor
REBOOT
Internals:
Clients :IT:CUL_TCM97001:SD_RSL:OREGON:CUL_TX:SD_AS:Hideki:SD_WS07:SD_WS09: :SD_WS:RFXX10REC:Dooya:SOMFY:SD_BELL:SD_UT:SD_WS_Maverick:FLAMINGO:CUL_WS:Revolt: :FS10:CUL_FHTTK:Siro:FHT:FS20:CUL_EM:Fernotron:SD_Keeloq:SD_GT:SIGNALduino_un:
DEF /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0@57600
DMSG YsA04F4F4FAA53CC
DevState initialized
DeviceName /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0@57600
FD 259
FUUID 60a8a8b8-f33f-0b7a-6aa9-94fc18f88472a655
FVERSION 00_SIGNALduino.pm:v3.4.2-s22409/2020-07-16
LASTDMSG YsA04F4F4FAA53CC
LASTDMSGID 43
MSGCNT 11
NAME mySIGNALduino_WZ
NR 1886
PARTIAL
RAWMSG MC;LL=-1308;LH=1313;SL=-643;SH=648;D=A04F4F4FAA53CC;C=651;L=56;R=21;s27;b27;
RSSI -63.5
STATE opened
TIME 1622850807.78288
TYPE SIGNALduino
cc1101_available 1
sendworking 0
unknownmessages
version V 3.3.4-dev200914 SIGNALduino cc1101 (b0) - compiled at Sep 17 2020 23:37:47
versionProtocols 1.21
versionmodul v3.4.4
DoubleMsgIDs:
MatchList:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
11:SD_WS09 ^P9#F[A-Fa-f0-9]+
12:SD_WS ^W\d+x{0,1}#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^Ys[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
17:SD_UT ^P(?:14|20|26|29|30|34|46|68|69|76|81|83|86|90|91|91.1|92|93|95|97|99|104)#.*
18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
19:CUL_WS ^K[A-Fa-f0-9]{5,}
1:IT ^i......
20:Revolt ^r[A-Fa-f0-9]{22}
21:FS10 ^P61#[A-F0-9]+
22:Siro ^P72#[A-Fa-f0-9]+
23:FHT ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
24:FS20 ^81..(04|0c)..0101a001
25:CUL_EM ^E0.................
26:Fernotron ^P82#.*
27:SD_BELL ^P(?:15|32|41|42|57|79|96|98)#.*
28:SD_Keeloq ^P(?:87|88)#.*
29:SD_GT ^P49#[A-Fa-f0-9]+
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
3:SD_RSL ^P1#[A-Fa-f0-9]{8}
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
6:SD_AS ^P2#[A-Fa-f0-9]{7,8}
7:Hideki ^P12#75[A-F0-9]+
9:CUL_FHTTK ^T[A-F0-9]{8}
X:SIGNALduino_un ^[u]\d+#.*
QUEUE:
READINGS:
2021-06-05 09:24:13 cc1101_config Freq: 433.420 MHz, Bandwidth: 325 KHz, rAmpl: 42 dB, sens: 8 dB, DataRate: 5603.79 Baud
2021-06-05 09:24:13 cc1101_config_ext Modulation: ASK/OOK, Syncmod: No preamble/sync
2021-06-05 01:50:17 cc1101_patable C3E = 00 84 00 00 00 00 00 00 => 5_dBm
2021-06-04 14:33:51 lastState rawmsg mc
2021-06-05 01:39:57 ping OK
2021-06-05 09:24:12 state opened
2021-05-25 00:57:30 version V 3.3.4-dev200914 SIGNALduino cc1101 (b0) - compiled at Sep 17 2020 23:37:47
additionalSets:
flash 3.5.0-dev+20201221,3.4.0,3.4.0-dev+20200711,3.4.0-dev+20200216,3.3.1
helper:
bm:
CODE(0x514d728):
cnt 5
dmx -1000
dtot 0
dtotcnt 0
mTS 05.06. 00:57:59
max 0.129255056381226
tot 0.504888772964478
mAr:
HASH(0xa941400)
mySIGNALduino_WZ SIGNALduino /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0@38400
CODE(0x51b4038):
cnt 2011
dmx -1000
dtot 0
dtotcnt 0
mTS 04.06. 21:52:33
max 0.193655014038086
tot 1.70259952545166
mAr:
HASH(0xa941400)
mySIGNALduino_WZ
reset
CODE(0x51b7fa0):
cnt 34
dmx -1000
dtot 0
dtotcnt 0
mTS 04.06. 20:56:51
max 0.00597405433654785
tot 0.0221273899078369
mAr:
HASH(0xa941400)
mySIGNALduino_WZ
availableFirmware
CODE(0x527b310):
cnt 1153
dmx -1000
dtot 0
dtotcnt 0
mTS 04.06. 14:49:24
max 0.31705379486084
tot 44.5201117992401
mAr:
HASH(0xa941400)
CODE(0x53019a0):
cnt 1172
dmx -1000
dtot 0
dtotcnt 0
mTS 04.06. 15:25:36
max 0.226093053817749
tot 40.8063614368439
mAr:
HASH(0xa941400)
CODE(0x5302078):
cnt 1
dmx -1000
dtot 0
dtotcnt 0
mTS 04.06. 20:46:51
max 0.000120878219604492
tot 0.000120878219604492
mAr:
set
mySIGNALduino_WZ
verbose
5
keepalive:
ok 0
retry 1
mcIdList:
10
11
12
18
43
47
52
57
58
msIdList:
0
1
3
3.1
4
6
7
13
13.2
15
17
20
23
25
33
35
41
49
51
55
65
68
muIdList:
8
9
13.1
16
17.1
19
21
22
24
26
27
28
29
30
31
32
34
36
37
38
39
40
44
44.1
45
46
48
50
56
59
60
61
62
64
66
67
69
70
71
72
74
79
80
81
83
84
85
86
89
92
ucCmd:
cmd ping
timenow 1622877979.41568
Attributes:
cc1101_frequency 433.420
debug 0
event-on-change-reading state
flashCommand avrdude -c arduino -b [BAUDRATE] -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
group Empfänger
hardware nanoCC1101
icon cul_usb
rawmsgEvent 1
room Z_System->SOMFY,Rollos,Zentrale
updateChannelFW Ralf9
userReadings lastState
verbose 5
whitelist_IDs 0,1,3,3.1,4,6,7,8,9,10,11,12,13,13.1,13.2,15,16,17,17.1,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,43,44,44.1,45,46,47,48,49,50,51,52,55,56,57,58,59,60,61,62,64,65,66,67,68,69,70,71,72,74,79,80,81,83,84,85,86,89,92
Danke für jede Hilfe.
lg, Gerhard
Ich denke, ich bin voll in die Update-Falle getappt.
Um den Stick in Betrieb zu nehmen, musste ich natürlich die 00_SIGNALduino.pm und die signalduino_protocols.pm von Ralf9 installieren.
Die werden wohl bei einem "update" von fhem überschrieben.
Kaum sind die richtigen Dateien wieder auf meinem fhem, scheint wieder alles zu klappen.
Danke jedenfalls!
Manchmal reicht es schon, ein Problem genau beschreiben zu müssen um selber auf den richtigen Weg zu kommen ;-)
lg, Gerhard