Hallo,
seit einiger Zeit habe ich bei dem deConz Gerät folgendes im Log. Es funktioniert aber alles, die Meldungen müllen natürlich das Log voll, daher will ich dem mal auf den Grund gehen.
Es sind insgesamt: 7 Lichter und 18 Sensoren (laut den IDs).
[...]
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:25 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:26 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
2021.06.09 21:38:32 2: deCONZ: http request failed: connect to http://10.0.0.22:80 timed out
[...]
Internals:
DEF 10.0.0.22
FD 15
FUUID 5e56bacd-f33f-e150-212a-bfe3002004121ff7
FVERSION 30_HUEBridge.pm:0.242960/2021-04-21
INTERVAL 60
NAME deCONZ
NOTIFYDEV global
NR 204
NTFY_ORDER 50-deCONZ
PORT 56318
STATE connected
TYPE HUEBridge
apiversion 1.16.0
bridgeid 00212EFFFF054DCD
buf
host 10.0.0.22
mac b8:27:eb:a5:fe:d5
manufacturer Royal Philips Electronics
modelName Philips hue bridge 2015
modelid deCONZ
name deconz1
swversion 2.12.0
updatestate 0
websocket 1
websocketport 443
zigbeechannel 15
READINGS:
2020-03-01 12:26:08 alert none
2021-06-09 21:43:45 state connected
=> die helper und gruppen habe ich mal ausgelassen, kann bei bedarf aber nachgereicht werden
Attributes:
httpUtils 1
icon hue_filled_bridge_v2
key 2683A16C3F
noshutdown 1
pollDevices 2
room HUEDevice,IO
Ich hatte pollDevices auch auf 1 bzw vorher nicht definiert, ergab aber die gleichen Meldungen.
Vielleicht hat ja jemand einen Tip, was ich prüfen sollte.
Danke,
Ronny