Hallo zusammen,
ich bin relativ neu im Thema FHEM und würde gerne meine Rollos die mit Eltako FSB61 Aktoren gesteuert werden in FHEM einbinden. Ich weiß, diese Fragen mit DOIF wurden hier schon öfters gestellt, aber bei mir gibt es da eine Besonderheit: die Aktoren besitzen die Fertigungswoche 10/14, aber die Bestätigungs-Telegramme werden erst ab Produktionswoche 11/14 unterstützt. Kann man da irgendwie doch was mit DOIF machen (z.B. Taster BI gedrückt, Zeitmessung starten, Taster B0 gedrückt, Zeitmessung stoppen und die Zeit als Schließ/Öffnungszeit nehmen)
Events wenn ich den Taster drücke und dann den Rollladen wieder stoppe:
2021-08-30 14:03:05 EnOcean EnO_0024F1AE buttons: pressed
2021-08-30 14:03:05 EnOcean EnO_0024F1AE channelB: BI
2021-08-30 14:03:05 EnOcean EnO_0024F1AE BI
2021-08-30 14:03:05 EnOcean EnO_0024F1AE buttons: released
2021-08-30 14:03:07 EnOcean EnO_0024F1AE buttons: pressed
2021-08-30 14:03:07 EnOcean EnO_0024F1AE channelB: B0
2021-08-30 14:03:07 EnOcean EnO_0024F1AE B0
2021-08-30 14:03:07 EnOcean EnO_0024F1AE buttons: released
Meine Konfiguration:
define Rollo EnOcean 0xxxxxxx
attr Rollo IODev TCM_ESP3_0
attr Rollo eep A5-3F-7F
attr Rollo genericDeviceType blind
attr Rollo homebridgeMapping CurrentPosition:invert=1 TargetPosition:invert=1
attr Rollo manufID 00D
attr Rollo model Eltako_FSB_ACK
attr Rollo room EnOcean
attr Rollo shutTime 25
attr Rollo shutTimeCloses 25
attr Rollo stateFormat position
attr Rollo subDef xxxxxx02
attr Rollo subType manufProfile
attr Rollo webCmd opens:stop:closes
und meine Internals:
DEF 0xxxxxxx
IODev TCM_ESP3_0
NAME Rollo
NR 26
NTFY_ORDER 50-Rollo
STATE 0
TYPE EnOcean
Vielen Dank schon mal im Voraus!
TheMDcraft