Hallo
villeicht kann mir jemand helfen; Auf einmal geht meine HMUART auf meinem RASPI 3b (GPIO) nicht mehr
Bekomme folgende Meldung
2021.10.15 19:09:47 1: HMUARTLGW myHmUART did not respond for the 1. time, resending
2021.10.15 19:09:50 1: HMUARTLGW myHmUART did not respond for the 2. time, resending
2021.10.15 19:09:53 1: HMUARTLGW myHmUART did not respond for the 3. time, resending
2021.10.15 19:09:56 1: HMUARTLGW myHmUART did not respond after all, reopening
Habe alles probiert - und aktuell auch alle USB -Geräte raus - . restart und reopen - Auch den Raspi runtergefahren und Modul neu eingesteckt
Jetzt bin ich ratlos
Anbei der list
Internals:
CNT 1
Clients :CUL_HM:
DEF /dev/ttyAMA0
DevState 0
DevType UART
DeviceName /dev/ttyAMA0@115200
FUUID 5ca8668a-f33f-5cbc-0916-7dd0f54fb4477048
LastOpen 1634317783.48864
NAME myHmUART
NOTIFYDEV global
NR 59
NTFY_ORDER 50-myHmUART
PARTIAL
STATE closed
TYPE HMUARTLGW
XmitOpen 0
model HM-MOD-UART
Helper:
AckPending:
1:
cmd 00
dst 0
frame FD00030001009E03
resend 3
time 1634317784.70545
LastSendLen:
3
Log:
IDs:
MatchList:
1:CUL_HM ^A......................
PeerQueue:
HASH(0x471fb20)
HASH(0x4727928)
HASH(0x4719b60)
HASH(0x471a090)
HASH(0x463a888)
HASH(0x4714fd0)
HASH(0x46fb280)
HASH(0x47180d8)
HASH(0x47276b8)
HASH(0x470f638)
HASH(0x4144a88)
HASH(0x46fb400)
HASH(0x47105b8)
HASH(0x4716598)
HASH(0x4712ab8)
HASH(0x4714ad8)
HASH(0x471cf28)
HASH(0x46f65b8)
HASH(0x4725318)
HASH(0x471ede8)
HASH(0x4724cd0)
HASH(0x4725348)
HASH(0x4719788)
HASH(0x4719cb8)
HASH(0x4723a18)
HASH(0x471c5c0)
HASH(0x471cca0)
HASH(0x4727bb8)
Peers:
39F16D pending
44BE01 pending
44BE63 pending
46416C pending
4A6CC0 pending
4C7A56 pending
4F44FF pending
4F47B6 pending
553EA2 pending
555911 pending
578A58 pending
578B82 pending
578BBE pending
58E90F pending
68D433 pending
68D466 pending
READINGS:
2021-10-15 18:41:09 D-HMIdAssigned 6A5C29
2021-10-15 18:41:09 D-HMIdOriginal 6A5C29
2021-10-15 18:41:09 D-firmware 1.4.1
2021-10-15 18:41:09 D-serialNr PEQ0532381
2021-10-15 19:09:06 D-type HM-MOD-UART
2021-10-15 19:09:56 cond disconnected
2021-10-15 18:42:06 load 0
2021-10-15 19:09:06 loadLvl suspended
2021-10-15 19:12:01 state closed
helper:
Attributes:
hmId 6A5C29
room raspi->Kommunikation
verbose 5
debmatic, auf der selben maschine wie fhem, "krallt" sich ggf beim booten den hmuart.
pivccu auch?
Ja, ich habe eine piVCCU laufen mit einem HMIP-USB-STICK auf dem selben RASPI , habe aber vor FHEM auf einem separaten RASPI umzuziehen
ebenso habe ich auch einen Conbee und Rademacher Stick
Der Raspi scheint die platine auch sauber zukennen. Die Prüfungen
ls -l /dev/ttyAMA0
ls -l /dev/serial*
liefern das korrekte Ergebnis
Ich habe inzwischen auch festgestellt, das bei das Device initialUsBCheck , warum auch immer, gelöscht war. Nun neu erzeugt.
Das Gehäuse vom RASPI drückt auch etwas auf die HMMODRPIMOD- Platine. Ich lasse gearde den Deckel mal ab
...und siehe da ...jetzt gehts wieder
Das mit dem 'krallen' erscheint mir noch die einleuchteste Erklärung
Kann man das irgendwo erkennen...im FHEM logfile konte ich das nicht rauslesen
Grüße
Thorsten
und nun läuft es wieder....