Hallo in die Runde,
mein Problem ist gerade das ich keine LOG-Einträge von Homematic mehr bekomme, wenn ich HM-Geräte mit Handtaster o.ä. bediene. Weder vom Aktor noch Sensor werden LOG-Einträge gemacht.
Bediene Ich die Aktoren von Fhem aus, werden nur die SET-Befehle von Fhem geschrieben.
FS20 Module schreiben in den Logfile. Arbeitsspeicher voll kann also eigentlich auch nicht sein, habe ich auch aufgeräumt.
Es muss was generelles mit Homematic bei mir falsch sein. VCCU oder ActionDedector vielleicht?
hminfo zeigt mit peerCheck und configCheck keine fehlerhaften Einträge.
Ich hab alles im Forum und Google dahin gehend durchsucht, bin aber nicht fündig geworden.
Wo kann ich noch suchen oder hat jemand eine Idee?
Ich habe erstmal keine Auszüge o.ö. gepostet da ich im Moment auch noch nicht weiss wo ich gucken kann was wo faul sein könnte.
Gruß
Eckhard
Zitatmein Problem ist gerade das ich keine LOG-Einträge von Homematic mehr bekomme, wenn ich HM-Geräte mit Handtaster o.ä. bediene.
zeig mal die letzten einträge, die noch funktioniert haben.
dazu ein list vom device: "list <devicename>"
Hier mal Zwei Devices aus der .cfg
Der Wandtaster bedient die Jalousie. Funktioniert auch, zwar noch nicht 1:1 mit den internen Tastern aber das ist ein anderes Thema (toggeln,auf,zu).
define HM_WandTaster_2 CUL_HM 737FB2
setuuid HM_WandTaster_2 60f69bbd-f33f-0f9b-d8b8-505b375159af2458
attr HM_WandTaster_2 .mId 006B
attr HM_WandTaster_2 IOgrp VCCU
attr HM_WandTaster_2 actCycle 001:00
attr HM_WandTaster_2 actStatus unknown
attr HM_WandTaster_2 autoReadReg 4_reqStatus
attr HM_WandTaster_2 expert rawReg
attr HM_WandTaster_2 firmware 1.4
attr HM_WandTaster_2 icon taster_ch
attr HM_WandTaster_2 model HM-PB-2-WM55
attr HM_WandTaster_2 room 02.03_Schlafzimmer,08.01_HomeMatic
attr HM_WandTaster_2 serialNr REQ1216551
attr HM_WandTaster_2 subType pushButton
attr HM_WandTaster_2 webCmd getConfig:clear msgEvents
define HM_WandTaster_2B1 CUL_HM 737FB201
setuuid HM_WandTaster_2B1 60f69bbd-f33f-0f9b-acbe-a24e81bbfd83f12b
attr HM_WandTaster_2B1 icon taster_ch_1
attr HM_WandTaster_2B1 model HM-PB-2-WM55
attr HM_WandTaster_2B1 peerIDs 00000000,66B8A601
attr HM_WandTaster_2B1 room 02.03_Schlafzimmer
define HM_Jalousie_Nord CUL_HM 66B8A6
setuuid HM_Jalousie_Nord 610970db-f33f-0f9b-25f7-3139b8683e4bbfda
attr HM_Jalousie_Nord .mId 0107
attr HM_Jalousie_Nord IOgrp VCCU
attr HM_Jalousie_Nord autoReadReg 4_reqStatus
attr HM_Jalousie_Nord expert rawReg
attr HM_Jalousie_Nord firmware 2.11
attr HM_Jalousie_Nord fp_Hb1_Haus 349,132,1,Jalousie_Nord,
attr HM_Jalousie_Nord icon openautomation/fts_shutter_90
attr HM_Jalousie_Nord model HM-LC-JA1PBU-FM
attr HM_Jalousie_Nord peerIDs 00000000,737FB201,737FB202,73FE5B03,73FE5B04
attr HM_Jalousie_Nord room 02.03_Schlafzimmer,08.01_HomeMatic
attr HM_Jalousie_Nord serialNr PEQ0096927
attr HM_Jalousie_Nord subType blindActuator
attr HM_Jalousie_Nord webCmd statusRequest:toggleDir:on:off:up:down:stop
Es sind noch weitere Devices in der .cfg die es betrifft aber als Beispielauszug müsste das reichen.
Leider behalte ich immer nur drei Logfiles pro Tag, die Anderen lösche ich, die in diesem Fall leider.
Ich kan auch nicht genau sagen seut wann das so ist. Ich hab jetzt nur neue Devices eingebunden und es bemerkt.
Und hier mal ein List
Internals:
CUNO_MSGCNT 14
CUNO_RAWMSG A1057A41066B8A65812090601C80080C800::-80:CUNO
CUNO_RSSI -80
CUNO_TIME 2021-12-09 08:47:41
DEF 66B8A6
FUUID 610970db-f33f-0f9b-25f7-3139b8683e4bbfda
IODev CUNO
LASTInputDev CUNO
MSGCNT 14
NAME HM_Jalousie_Nord
NR 208
NTFY_ORDER 48-HM_Jalousie_Nord
STATE on
TYPE CUL_HM
chanNo 01
disableNotifyFn 1
lastMsg No:57 - t:10 s:66B8A6 d:581209 0601C80080C800
peerList HM_HandTaster_8B3,HM_HandTaster_8B4,HM_WandTaster_2B1,HM_WandTaster_2B2
protLastRcv 2021-12-09 08:47:41
protRcv 14 last_at:2021-12-09 08:47:41
protSnd 8 last_at:2021-12-09 08:47:41
protState CMDs_done
rssi_HM_WandTaster_2 cnt:7 min:-68 max:-63 avg:-65.57 lst:-63
rssi_VCCU cnt:2 min:-77 max:-77 avg:-77 lst:-77
rssi_at_CUNO cnt:14 min:-87 max:-75.5 avg:-80.64 lst:-80
READINGS:
2021-12-09 08:47:26 CommandAccepted yes
2021-12-04 12:01:19 D-firmware 2.11
2021-12-04 12:01:19 D-serialNr PEQ0096927
2021-12-09 08:47:41 IODev CUNO
2021-12-08 16:21:05 PairedTo 0x581209
2021-12-08 16:21:05 RegL_00. 00:00 02:01 0A:58 0B:12 0C:09 15:05 18:00
2021-12-08 16:21:07 RegL_01. 00:00 08:00 09:00 0A:00 0B:03 0C:84 0D:03 0E:84 0F:05 10:00 30:06 56:00 57:24 B3:00 B4:64 B5:14
2021-12-08 16:21:12 RegL_03.HM_HandTaster_8B3 00:00 01:00 02:00 03:00 04:32 05:64 06:00 07:FF 08:00 09:FF 0A:01 0B:14 0C:52 0D:63 0E:00 0F:00 11:C8 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 1A:00 1B:00 1C:00 1D:01 1E:63 1F:00 33:CA 34:CA 81:00 82:00 83:00 84:32 85:64 86:00 87:FF 88:00 89:FF 8A:01 8B:14 8C:52 8D:63 8E:00 8F:00 91:C8 92:00 93:00 94:00 95:00 96:00 97:00 98:00 99:00 9A:00 9B:00 9C:00 9D:FF 9E:63 9F:00 B3:CA B4:CA
2021-12-08 16:21:15 RegL_03.HM_HandTaster_8B4 00:00 01:00 02:00 03:00 04:32 05:64 06:00 07:FF 08:00 09:FF 0A:01 0B:14 0C:52 0D:63 0E:00 0F:00 11:C8 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 1A:00 1B:00 1C:00 1D:01 1E:63 1F:00 33:CA 34:CA 81:00 82:00 83:00 84:32 85:64 86:00 87:FF 88:00 89:FF 8A:01 8B:14 8C:52 8D:63 8E:00 8F:00 91:C8 92:00 93:00 94:00 95:00 96:00 97:00 98:00 99:00 9A:00 9B:00 9C:00 9D:FF 9E:63 9F:00 B3:CA B4:CA
2021-12-08 16:21:19 RegL_03.HM_WandTaster_2B1 00:00 01:00 02:00 03:00 04:32 05:64 06:00 07:FF 08:00 09:FF 0A:01 0B:14 0C:52 0D:63 0E:00 0F:00 11:C8 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 1A:00 1B:00 1C:00 1D:01 1E:63 1F:00 33:CA 34:CA 81:00 82:00 83:00 84:32 85:64 86:00 87:FF 88:00 89:FF 8A:01 8B:14 8C:52 8D:63 8E:00 8F:00 91:C8 92:00 93:00 94:00 95:00 96:00 97:00 98:00 99:00 9A:00 9B:00 9C:00 9D:FF 9E:63 9F:00 B3:CA B4:CA
2021-12-08 16:21:23 RegL_03.HM_WandTaster_2B2 00:00 01:00 02:00 03:00 04:32 05:64 06:00 07:FF 08:00 09:FF 0A:01 0B:14 0C:52 0D:63 0E:00 0F:00 11:C8 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 1A:00 1B:00 1C:00 1D:01 1E:63 1F:00 33:CA 34:CA 81:00 82:00 83:00 84:32 85:64 86:00 87:FF 88:00 89:FF 8A:01 8B:14 8C:52 8D:63 8E:00 8F:00 91:C8 92:00 93:00 94:00 95:00 96:00 97:00 98:00 99:00 9A:00 9B:00 9C:00 9D:FF 9E:63 9F:00 B3:CA B4:CA
2021-12-09 07:44:51 cfgState ok
2021-12-09 08:47:41 commState CMDs_done
2021-12-09 08:47:41 deviceMsg on (to VCCU)
2021-12-09 08:47:41 level 100
2021-12-09 08:47:41 motor stop:on
2021-12-09 08:47:41 pct 100
2021-12-09 08:47:41 pctSlat 100
2021-12-09 08:05:46 peerList HM_HandTaster_8B3,HM_HandTaster_8B4,HM_WandTaster_2B1,HM_WandTaster_2B2
2021-12-07 17:48:48 powerOn 2021-12-07 17:48:47
2021-12-09 08:47:41 recentStateType info
2021-12-09 08:47:41 slatDir stop
2021-12-09 08:47:41 state on
2021-12-09 08:47:41 timedOn off
2021-12-09 08:47:26 trigLast HM_WandTaster_2B2:long
2021-12-08 17:04:06 trig_HM_HandTaster_8B3 Short_57
2021-12-08 17:04:04 trig_HM_HandTaster_8B4 Short_53
2021-12-07 18:42:50 trig_HM_WandTaster_2B1 Short_19
2021-12-09 08:47:26 trig_HM_WandTaster_2B2 Long_16
helper:
HM_CMDNR 87
cSnd 0158120966B8A6010E,1158120966B8A68001C8CA
dlvlCmd ++A01158120966B8A68001C8CA
lastMsgTm 1639036061.47011
mId 0107
peerFriend peerSens,peerVirt
peerIDsState complete
peerOpt 3:blindActuator
regLst 0,1,3p
rxType 1
supp_Pair_Rep 0
cmds:
TmplKey HM_HandTaster_8B3,HM_HandTaster_8B4,HM_WandTaster_2B1,HM_WandTaster_2B2:no:1639060989.82312
TmplTs 1639060989.82312
cmdKey 1:1:0::HM_Jalousie_Nord:0107:01:HM_HandTaster_8B3,HM_HandTaster_8B4,HM_WandTaster_2B1,HM_WandTaster_2B2
cmdLst:
assignHmKey noArg
clear [(readings|trigger|register|oldRegs|rssi|msgEvents|{msgErrors}|attack|all)]
deviceRename -newName-
down 'change:'[(0..100;1|{10})] [(-ontime-|{})] [(-ramptime-|{})]
eventL -peer- -cond-
eventS -peer- -cond-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
getVersion noArg
inhibit [(on|{off})]
off noArg
on noArg
pair noArg
pct -value- [-ontime-]
pctLvlSlat (-value-|old|noChng) (-slatValue-|old|noChng)
pctSlat (-slatValue-|old|noChng)
peerBulk -peer1,peer2,...- [({set}|unset)]
peerIODev [IO] -btn- [({set}|unset)] 'not for future use'
peerSmart -peerOpt-
press [(long|{short})] [(-peer-|{self01})] [(-repCount-|{0})] [(-repDelay-|{0.25})]
pressL [(-peer-|{self01})]
pressS [(-peer-|{self01})]
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
statusRequest noArg
stop noArg
toggle noArg
toggleDir noArg
tplDel -tplDel-
tplSet_0 -tplChan-
tplSet_HM_HandTaster_8B3 -tplPeer-
tplSet_HM_HandTaster_8B4 -tplPeer-
tplSet_HM_WandTaster_2B1 -tplPeer-
tplSet_HM_WandTaster_2B2 -tplPeer-
unpair noArg
up 'change:'[(0..100;1|{10})] [(-ontime-|{})] [(-ramptime-|{})]
lst:
condition slider,0,1,255
peer HM_HandTaster_8B3,HM_HandTaster_8B4,HM_WandTaster_2B1,HM_WandTaster_2B2
peerOpt remove_HM_HandTaster_8B3,remove_HM_HandTaster_8B4,remove_HM_WandTaster_2B1,remove_HM_WandTaster_2B2,HM_HandTaster_8B1,HM_HandTaster_8B2,HM_HandTaster_8B5,HM_HandTaster_8B6,HM_HandTaster_8B7,HM_HandTaster_8B8,HM_KelSauBew_Btn_01,HM_KelSauBew_Btn_02,HM_KelSauBew_Motion,HM_TerrSchl,HM_TerrTueKo,HM_WohnTuerKo
tplChan
tplDel
tplPeer BlStopDnLg_long,BlStopDnLg_short,BlStopDnSh_long,BlStopDnSh_short,BlStopUpLg_long,BlStopUpLg_short,BlStopUpSh_long,BlStopUpSh_short,SwCondAbove_long,SwCondAbove_short,SwCondBelow_long,SwCondBelow_short,SwOnCond_long,SwOnCond_short
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
dir:
cur stop
rct up
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 0
newChn +66B8A6,00,00,00
nextSend 1639036061.57399
rxt 0
vccu
p:
66B8A6
00
00
00
prefIO:
mRssi:
mNo 57
io:
CUNO:
-78
-78
peerIDsH:
00000000 broadcast
737FB201 HM_WandTaster_2B1
737FB202 HM_WandTaster_2B2
73FE5B03 HM_HandTaster_8B3
73FE5B04 HM_HandTaster_8B4
prt:
bErr 0
sProc 0
rspWait:
tryMsg:
q:
qReqConf
qReqStat
role:
chn 1
dev 1
prs 1
rpt:
IO CUNO
flg A
ts 1639036061.47011
ack:
HASH(0x34c3770)
57800258120966B8A600
rssi:
HM_WandTaster_2:
avg -65.5714285714286
cnt 7
lst -63
max -63
min -68
VCCU:
avg -77
cnt 2
lst -77
max -77
min -77
at_CUNO:
avg -80.6428571428571
cnt 14
lst -80
max -75.5
min -87
tmpl:
Attributes:
IOgrp VCCU
autoReadReg 4_reqStatus
expert rawReg
firmware 2.11
fp_Hb1_Haus 349,132,1,Jalousie_Nord,
icon openautomation/fts_shutter_90
model HM-LC-JA1PBU-FM
peerIDs 00000000,737FB201,737FB202,73FE5B03,73FE5B04
room 02.03_Schlafzimmer,08.01_HomeMatic
serialNr PEQ0096927
subType blindActuator
webCmd statusRequest:toggleDir:on:off:up:down:stop
ZitatBediene Ich die Aktoren von Fhem aus, werden nur die SET-Befehle von Fhem geschrieben.
in fhem.log war noch nie etwas anderes zu sehen.
wenn, dann musst du in den eventlogs (zb FileLog_...) schauen. falls du ein eventlog für HM_Jalousie_Nord hast, sollte da auch etwas enthalten sein.
Na bin ich denn schon so Fhem-Betriebsblind, dass ich da auf falschen Gedanken unterwegs bin?
Ich hätte schwören können, alles in den Fhemlog gesehen zu haben.
Im EventMonitor sehe ich auch alles, der ist ok.
Also heißt das, die oben gezeigten Codes sind so weit in Ordnung?
Es ist schon nicht einfach mit den ganzen Syntax`sen.
Ich habe Fhem schon seit min. 10 Jahren aber Profi bin ich da nicht geworden.
Das eigentliche Thema, warum ich grad wieder in Fhem rum wusele ist :
ZitatDer Wandtaster bedient die Jalousie. Funktioniert auch, zwar noch nicht 1:1 mit den internen Tastern aber das ist ein anderes Thema (toggeln,auf,zu).
also wenn hier erstmal alles i.O. ist und du nix mehr zu sagen kannst,
Danke ich dir erstmal, dass du mich von der falschen Färte geholt hast.
Gruß
Eckhard
ein sauberer hminfo configcheck ist doch schon mal ein guter anfang.
mit HMinfoTools.js bekommst du zusätzliche infos über erkannte probleme:
https://forum.fhem.de/index.php/topic,112825.0.html (https://forum.fhem.de/index.php/topic,112825.0.html)
Danke Frank,
für den Tip,
ich guck es mir an.
Schönen 3. Advent
Gruß
Eckhard