Ich habe als IO-Device den HM-MOD-UART (wird auf die GPIO-Leiste gesteckt) im Einsatz.
HMinfoTools zeigt neuerdings dafür ein rotes Icon an, was ich als Fehler interpretiere.
Sehe ich das richtig? falls ja, was kann ich machen. Die meisten Devices zeigen die Meldung iERR_IODev_myHmUART an. Hat bestimmt damit zu tun.
Tür- und Fensterkontakte zeigen meist iERR_IODev_myHmUART, iERR_cfgState_updating an.
Die zugehörigen Zahnräder (Icons) sind orange.
Hier mal ein List eines Türkontaktes:
defmod Tuer_Kueche CUL_HM 31BB8E
attr Tuer_Kueche .mId 00B1
attr Tuer_Kueche IOgrp vccu
attr Tuer_Kueche actCycle 028:00
attr Tuer_Kueche actStatus alive
attr Tuer_Kueche alias Tür Küche
attr Tuer_Kueche autoReadReg 5_readMissing
attr Tuer_Kueche comment Batteriewechsel\
2020-01-28 11:19:40\
2021-07-09 11:19:40\
attr Tuer_Kueche devStateIcon closed:fts_door_right@LightSkyBlue open:fts_door_right_open@lime
attr Tuer_Kueche expert defReg,rawReg
attr Tuer_Kueche firmware 2.4
attr Tuer_Kueche group Fenster
attr Tuer_Kueche model HM-SEC-SC-2
attr Tuer_Kueche peerIDs peerUnread
attr Tuer_Kueche room Wohnung->Küche
attr Tuer_Kueche serialNr LEQ1061368
attr Tuer_Kueche subType threeStateSensor
setstate Tuer_Kueche closed
setstate Tuer_Kueche from archivexx .D-devInfo 810101
setstate Tuer_Kueche from archivexx .D-stc 80
setstate Tuer_Kueche 2021-12-11 10:05:39 .R-ledOnTime 0.5 s
setstate Tuer_Kueche 2021-12-11 10:05:39 .R-msgScPosA closed
setstate Tuer_Kueche 2021-12-11 10:05:39 .R-msgScPosB open
setstate Tuer_Kueche 2021-12-11 10:05:39 .R-transmDevTryMax 6
setstate Tuer_Kueche 2021-12-11 10:05:39 .R-transmitTryMax 6
setstate Tuer_Kueche 2021-12-11 15:34:35 .associatedWith Tuer_Kueche,Tuer_Kueche
setstate Tuer_Kueche 2021-12-02 08:15:20 .peerListRDate 2021-12-02 08:15:20
setstate Tuer_Kueche 2021-12-12 09:44:31 .protLastRcv 20211212094431
setstate Tuer_Kueche 2021-12-11 15:44:34 Activity alive
setstate Tuer_Kueche 2019-05-19 11:22:07 CommandAccepted yes
setstate Tuer_Kueche from archivexx D-firmware 2.4
setstate Tuer_Kueche from archivexx D-serialNr LEQ1061368
setstate Tuer_Kueche 2021-12-12 09:44:31 IODev myHmUART
setstate Tuer_Kueche 2021-12-02 08:15:19 PairedTo 0x272E01
setstate Tuer_Kueche 2021-12-11 10:05:39 R-cyclicInfoMsg on
setstate Tuer_Kueche 2021-12-11 10:05:39 R-eventDlyTime 0 s
setstate Tuer_Kueche 2021-12-11 10:05:39 R-pairCentral 0x272E01
setstate Tuer_Kueche 2021-12-11 10:05:39 R-sabotageMsg on
setstate Tuer_Kueche 2021-12-11 10:05:39 R-sign off
setstate Tuer_Kueche 2021-12-02 08:15:19 RegL_00. 00:00 02:01 09:01 0A:27 0B:2E 0C:01 10:01 14:06
setstate Tuer_Kueche 2021-12-02 08:15:20 RegL_01. 00:00 08:00 20:60 21:00 22:64 30:06
setstate Tuer_Kueche 2021-12-02 08:16:53 alive yes
setstate Tuer_Kueche 2021-12-12 09:44:31 battery ok
setstate Tuer_Kueche 2021-12-11 15:34:36 cfgState updating
setstate Tuer_Kueche 2021-12-12 09:44:31 commState CMDs_done
setstate Tuer_Kueche 2021-12-12 09:44:31 contact closed (to vccu)
setstate Tuer_Kueche 2021-12-02 08:11:08 powerOn 2021-12-02 08:11:08
setstate Tuer_Kueche 2021-12-02 08:16:53 recentStateType info
setstate Tuer_Kueche 2021-12-02 08:16:53 sabotageError off
setstate Tuer_Kueche 2021-12-12 09:44:31 state closed
setstate Tuer_Kueche 2021-12-12 09:44:31 trigger_cnt 204
Hat jemand einen Tipp, was ich dagegen tun kann?
Danke im Voraus.
zeig mal je ein "echtes" list von vccu und myHmUART. also den fhem cmd list.
ausserdem ein "get Tuer_Kueche list full"
Mache ich. Ist aber echt viel.
Internals:
.AttrList .devInfo .mId .stc IODev IOgrp actCycle actStatus aesCommReq:1,0 aesKey:5,4,3,2,1,0 autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto commStInCh:on,off do_not_notify:1,0 dummy:1,0 event-aggregator event-min-interval event-on-change-reading event-on-update-reading expert:multiple,defReg,allReg,rawReg,templ,none firmware hmKey hmKey2 hmKey3 hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger ignore:1,0 levelMap levelRange model modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-2-PBU-FM-2,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 msgRepeat oldreadings param peerIDs readOnly:0,1 readingOnDead:multiple,noChange,state,periodValues,periodString,channels rssiLog:1,0 serialNr showtime:1,0 stateFormat:textField-long subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic timestamp-on-change-reading
DEF 31BB8E
FUUID 5cdff217-f33f-8098-6024-0e0821352a006a47
IODev myHmUART
LASTInputDev myHmUART
MSGCNT 96
NAME Tuer_Kueche
NR 320
NTFY_ORDER 48-Tuer_Kueche
STATE closed
TYPE CUL_HM
chanNo 01
disableNotifyFn 1
lastMsg No:F9 - t:41 s:31BB8E d:272E01 01F800
myHmUART_MSGCNT 96
myHmUART_RAWMSG 0501003CF9A64131BB8E272E0101F800
myHmUART_RSSI -60
myHmUART_TIME 2021-12-12 13:08:02
protLastRcv 2021-12-12 13:08:02
protRcv 94 last_at:2021-12-12 13:08:02
protSnd 94 last_at:2021-12-12 13:08:02
protState CMDs_done
rssi_at_myHmUART cnt:96 min:-69 max:-57 avg:-61.2 lst:-60
.attraggr:
.attrminint:
CL:
Authenticated 0
BUF
FD 76
FW_ID 54610
LASTACCESS 1639311676
NAME WEB_192.168.178.54_57741
NR 54918
PEER 192.168.178.54
PORT 57741
SNAME WEB
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
.attraggr:
.attrminint:
READINGS:
2021-12-12 13:21:16 state Connected
READINGS:
from archivexx .D-devInfo 810101
from archivexx .D-stc 80
2021-12-11 10:05:39 .R-ledOnTime 0.5 s
2021-12-11 10:05:39 .R-msgScPosA closed
2021-12-11 10:05:39 .R-msgScPosB open
2021-12-11 10:05:39 .R-transmDevTryMax 6
2021-12-11 10:05:39 .R-transmitTryMax 6
2021-12-11 15:34:35 .associatedWith Tuer_Kueche,Tuer_Kueche
2021-12-02 08:15:20 .peerListRDate 2021-12-02 08:15:20
2021-12-12 13:08:02 .protLastRcv 20211212130802
2021-12-11 15:44:34 Activity alive
2019-05-19 11:22:07 CommandAccepted yes
from archivexx D-firmware 2.4
from archivexx D-serialNr LEQ1061368
2021-12-12 13:08:02 IODev myHmUART
2021-12-02 08:15:19 PairedTo 0x272E01
2021-12-11 10:05:39 R-cyclicInfoMsg on
2021-12-11 10:05:39 R-eventDlyTime 0 s
2021-12-11 10:05:39 R-pairCentral 0x272E01
2021-12-11 10:05:39 R-sabotageMsg on
2021-12-11 10:05:39 R-sign off
2021-12-02 08:15:19 RegL_00. 00:00 02:01 09:01 0A:27 0B:2E 0C:01 10:01 14:06
2021-12-02 08:15:20 RegL_01. 00:00 08:00 20:60 21:00 22:64 30:06
2021-12-02 08:16:53 alive yes
2021-12-12 13:08:02 battery ok
2021-12-11 15:34:36 cfgState updating
2021-12-12 13:08:02 commState CMDs_done
2021-12-12 13:08:02 contact closed (to vccu)
2021-12-02 08:11:08 powerOn 2021-12-02 08:11:08
2021-12-02 08:16:53 recentStateType info
2021-12-02 08:16:53 sabotageError off
2021-12-12 13:08:02 state closed
2021-12-12 13:08:02 trigger_cnt 248
helper:
HM_CMDNR 249
lastMsgTm 1639310882.08957
mId 002F
peerFriend peerAct,peerVirt
peerIDsState peerUnread
peerOpt 4:threeStateSensor
regLst 0,1,4p
rxType 4
supp_Pair_Rep 0
tmplChg 0
cfgChk:
idPz00 fail
cmds:
TmplKey :1639233275:1639233275.96907
TmplTs 1639233275.96907
cmdKey 1:1:0::Tuer_Kueche:002F:01:
cmdLst:
assignHmKey noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan -btnNumber- -actChn- [({single})] [({set}|unset)] [actor|remote|both]
peerSmart -peerOpt-
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
tplDel -tplDel-
tplSet_0 -tplChan-
trgEventL -peer- -condition-
trgEventS -peer- -condition-
trgPressL [(-peer-|{all})]
trgPressS [(-peer-|{all})]
unpair noArg
lst:
condition closed,open,tilted
peer
peerOpt Links,Schloss,TeamDev
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 1
det 0
raw 1
tpl 0
io:
flgs 0
newChn +31BB8E,00,03,00
nextSend 1639310882.31919
rxt 0
vccu vccu
p:
31BB8E
00
03
00
prefIO:
mRssi:
mNo F9
io:
myHmUART:
-56
-56
peerIDsH:
prt:
bErr 0
sProc 0
rspWait:
q:
qReqConf 00
qReqStat
role:
chn 1
dev 1
rpt:
IO myHmUART
flg A
ts 1639310882.08957
ack:
HASH(0x65d0840)
F98002272E0131BB8E0101C800
rssi:
at_myHmUART:
avg -61.2083333333333
cnt 96
lst -60
max -57
min -69
shadowReg:
tmpl:
Attributes:
.mId 00B1
IOgrp vccu
actCycle 028:00
actStatus alive
alias Tür Küche
autoReadReg 5_readMissing
comment Batteriewechsel
2020-01-28 11:19:40
2021-07-09 11:19:40
devStateIcon closed:fts_door_right@LightSkyBlue open:fts_door_right_open@lime
expert defReg,rawReg
firmware 2.4
group Fenster
model HM-SEC-SC-2
peerIDs peerUnread
room Wohnung->Küche
serialNr LEQ1061368
subType threeStateSensor
Internals:
AssignedPeerCnt 18
CNT 19
Clients :CUL_HM:
DEF /dev/ttyAMA0
DEVCNT 19
DevState 99
DevType UART
DeviceName /dev/ttyAMA0@115200
FD 63
FUUID 5cdacbaf-f33f-8098-997d-8c13b207fc1eb43f
LastOpen 1639233274.06389
NAME myHmUART
NOTIFYDEV global
NR 246
NTFY_ORDER 47-myHmUART
PARTIAL
RAWMSG 040220
RSSI -68
STATE opened
TYPE HMUARTLGW
XmitOpen 1
model HM-MOD-UART
msgLoadCurrent 16
msgLoadHistory -2/-1/1/0/-1/2/2/2/2/1/0/0
msgLoadHistoryAbs 19/21/22/21/21/22/20/18/16/14/13/13/13
owner 272E01
owner_CCU vccu
Helper:
CreditTimer 5244
FW 66561
Initialized 1
SendCnt 1412
AckPending:
101:
cmd 02000000698002272E012491E101015200
dst 1
frame FD0013016502000000698002272E012491E101015200D9D9
time 1639310074.85545
104:
cmd 020000006A8002272E012491E101015200
dst 1
frame FD00130168020000006A8002272E012491E1010152003DBE
time 1639310104.50392
107:
cmd 020000006B8002272E012491E101015700
dst 1
frame FD0013016B020000006B8002272E012491E101015700E001
time 1639310134.72867
110:
cmd 020000006C8002272E012491E101015A00
dst 1
frame FD0013016E020000006C8002272E012491E101015A0074C0
time 1639310164.64501
113:
cmd 020000006D8002272E012A02990101CC00
dst 1
frame FD00130171020000006D8002272E012A02990101CC0061F9
time 1639310183.32795
114:
cmd 020000006E8002272E012491E101015900
dst 1
frame FD00130172020000006E8002272E012491E101015900B075
time 1639310194.96907
117:
cmd 020000006F8002272E012491E101015B00
dst 1
frame FD00130175020000006F8002272E012491E101015B002F9A
time 1639310224.85877
120:
cmd 02000000708002272E012491E101015C00
dst 1
frame FD0013017802000000708002272E012491E101015C0023E3
time 1639310254.62854
124:
cmd 02000000718002272E012491E101015E00
dst 1
frame FD0013017C02000000718002272E012491E101015E008030
time 1639310284.87125
127:
cmd 02000000728002272E012491E101015E00
dst 1
frame FD0013017F02000000728002272E012491E101015E003C8C
time 1639310314.86071
130:
cmd 02000000738002272E012491E101016000
dst 1
frame FD0013018202000000738002272E012491E1010160006F03
time 1639310344.46062
133:
cmd 02000000748002272E012491E101016100
dst 1
frame FD0013018502000000748002272E012491E1010161007BE9
time 1639310374.8623
135:
cmd 02000000758002272E012491E101016100
dst 1
frame FD0013018702000000758002272E012491E1010161002C41
time 1639310389.44214
137:
cmd 02000000768002272E012491E101015F00
dst 1
frame FD0013018902000000768002272E012491E101015F00F019
time 1639310404.86252
139:
cmd 02000000778002272E012491E101016000
dst 1
frame FD0013018B02000000778002272E012491E10101600025B1
time 1639310419.49633
141:
cmd 02000000788002272E012491E101015A00
dst 1
frame FD0013018D02000000788002272E012491E101015A00C346
time 1639310434.86373
143:
cmd 020000007A8002272E012491E101015700
dst 1
frame FD0013018F020000007A8002272E012491E101015700BA6D
time 1639310449.51207
145:
cmd 020000007B8002272E012491E101015D00
dst 1
frame FD00130191020000007B8002272E012491E101015D006073
time 1639310464.86397
148:
cmd 020000006E8002272E012A02990101CF00
dst 1
frame FD00130194020000006E8002272E012A02990101CF002293
time 1639310469.48442
150:
cmd 020000007C8002272E012491E101015100
dst 1
frame FD00130196020000007C8002272E012491E101015100DA9A
time 1639310494.86464
153:
cmd 020000007D8002272E012491E101015200
dst 1
frame FD00130199020000007D8002272E012491E101015200E3D5
time 1639310524.85981
156:
cmd 02000000F48002272E0131BB8E0101C800
dst 1
frame FD0013019C02000000F48002272E0131BB8E0101C8000F40
time 1639310545.64347
157:
cmd 02000000F58002272E0131BB8E0101C800
dst 1
frame FD0013019D02000000F58002272E0131BB8E0101C80064D4
time 1639310549.79104
158:
cmd 020000007E8002272E012491E101015200
dst 1
frame FD0013019E020000007E8002272E012491E1010152008F3A
time 1639310554.86765
163:
cmd 02000000F68002272E0131BB8E0101C800
dst 1
frame FD001301A302000000F68002272E0131BB8E0101C8007F45
time 1639310608.79763
164:
cmd 020000007F8002272E012491E101015400
dst 1
frame FD001301A4020000007F8002272E012491E1010154002FFB
time 1639310611.30774
165:
cmd 02000000F78002272E0131BB8E0101C800
dst 1
frame FD001301A502000000F78002272E0131BB8E0101C800F8BE
time 1639310612.29842
168:
cmd 02000000808002272E012491E101015500
dst 1
frame FD001301A802000000808002272E012491E1010155007377
time 1639310641.46238
172:
cmd 02000000818002272E012491E101015900
dst 1
frame FD001301AC02000000818002272E012491E10101590074A7
time 1639310671.36958
175:
cmd 02000000828002272E012491E101015B00
dst 1
frame FD001301AF02000000828002272E012491E101015B004418
time 1639310701.37057
178:
cmd 02000000838002272E012491E101016400
dst 1
frame FD001301B202000000838002272E012491E1010164001C3A
time 1639310731.25424
18:
cmd 02000000728002272E012A02990101D800
dst 1
frame FD0013011202000000728002272E012A02990101D800D8C9
time 1639311860.72782
181:
cmd 02000000858002272E012491E101016400
dst 1
frame FD001301B502000000858002272E012491E1010164007150
time 1639310761.01513
184:
cmd 02000000868002272E012491E101015D00
dst 1
frame FD001301B802000000868002272E012491E101015D000337
time 1639310791.37131
187:
cmd 02000000878002272E012491E101015C00
dst 1
frame FD001301BB02000000878002272E012491E101015C00468B
time 1639310821.24275
190:
cmd 02000000888002272E012491E101015C00
dst 1
frame FD001301BE02000000888002272E012491E101015C000040
time 1639310851.46641
192:
cmd 020000006F8002272E012A02990101D300
dst 1
frame FD001301C0020000006F8002272E012A02990101D300011B
time 1639310864.95518
194:
cmd 02000000F88002272E0131BB8E0101C800
dst 1
frame FD001301C202000000F88002272E0131BB8E0101C80011CF
time 1639310879.31904
195:
cmd 02000000898002272E012491E101015B00
dst 1
frame FD001301C302000000898002272E012491E101015B004FF0
time 1639310881.37454
197:
cmd 02000000F98002272E0131BB8E0101C800
dst 1
frame FD001301C502000000F98002272E0131BB8E0101C8000223
time 1639310882.3213
199:
cmd 02000000B18002272E0126A9980101C800
dst 1
frame FD001301C702000000B18002272E0126A9980101C80056B1
time 1639310897.21144
20:
cmd 02000000A28002272E0123A0920101C800
dst 1
frame FD0013011402000000A28002272E0123A0920101C800E211
time 1639309482.75602
200:
cmd 02000000B28002272E0126A9980101C800
dst 1
frame FD001301C802000000B28002272E0126A9980101C8001AFD
time 1639310901.4648
207:
cmd 02000000B38002272E0126A9980101C800
dst 1
frame FD001301CF02000000B38002272E0126A9980101C8000911
time 1639310981.46972
208:
cmd 02000000B48002272E0126A9980101C800
dst 1
frame FD001301D002000000B48002272E0126A9980101C800FA1D
time 1639310984.46958
209:
cmd 020000001A8002272E0126B7CA0101C800
dst 1
frame FD001301D1020000001A8002272E0126B7CA0101C8006ACB
time 1639310991.94355
21:
cmd 02000000A38002272E0123A0920101C800
dst 1
frame FD0013011502000000A38002272E0123A0920101C8008985
time 1639309486.00621
216:
cmd 020000001B8002272E0126B7CA0101C800
dst 1
frame FD001301D8020000001B8002272E0126B7CA0101C80021FC
time 1639311083.45119
218:
cmd 02000000B58002272E0126A9980101C800
dst 1
frame FD001301DA02000000B58002272E0126A9980101C8008D16
time 1639311094.97617
219:
cmd 02000000B68002272E0126A9980101C800
dst 1
frame FD001301DB02000000B68002272E0126A9980101C8009981
time 1639311098.72758
229:
cmd 02000000708002272E012A02990101D400
dst 1
frame FD001301E502000000708002272E012A02990101D400AF4D
time 1639311228.59751
23:
cmd 02000000F28002272E0131BB8E0101C800
dst 1
frame FD0013011702000000F28002272E0131BB8E0101C80018E5
time 1639309505.95473
25:
cmd 02000000498002272E012491E101013E00
dst 1
frame FD0013011902000000498002272E012491E101013E00F7DA
time 1639309508.15528
253:
cmd 02000000718002272E012A02990101D800
dst 1
frame FD001301FD02000000718002272E012A02990101D800192B
time 1639311560.8711
26:
cmd 02000000F38002272E0131BB8E0101C800
dst 1
frame FD0013011A02000000F38002272E0131BB8E0101C8008381
time 1639309509.20734
28:
cmd 020000006B8002272E012A02990101C900
dst 1
frame FD0013011C020000006B8002272E012A02990101C9009D8A
time 1639309515.46707
30:
cmd 020000004A8002272E012491E101014700
dst 1
frame FD0013011E020000004A8002272E012491E1010147008D33
time 1639309523.40035
32:
cmd 020000004B8002272E012491E101014A00
dst 1
frame FD00130120020000004B8002272E012491E101014A0047A2
time 1639309538.34232
34:
cmd 020000004C8002272E012491E101014900
dst 1
frame FD00130122020000004C8002272E012491E1010149009B0F
time 1639309553.19437
36:
cmd 020000004D8002272E012491E101014600
dst 1
frame FD00130124020000004D8002272E012491E1010146003EF4
time 1639309568.4404
38:
cmd 020000004E8002272E012491E101013E00
dst 1
frame FD00130126020000004E8002272E012491E101013E00865A
time 1639309582.93068
40:
cmd 020000004F8002272E012491E101014700
dst 1
frame FD00130128020000004F8002272E012491E1010147003704
time 1639309598.34344
42:
cmd 02000000508002272E012491E101014800
dst 1
frame FD0013012A02000000508002272E012491E10101480047B2
time 1639309612.99619
44:
cmd 02000000528002272E012491E101014700
dst 1
frame FD0013012C02000000528002272E012491E10101470062C9
time 1639309628.11853
46:
cmd 02000000538002272E012491E101014100
dst 1
frame FD0013012E02000000538002272E012491E1010141002161
time 1639309643.3646
49:
cmd 02000000548002272E012491E101014100
dst 1
frame FD0013013102000000548002272E012491E101014100D26D
time 1639309657.96935
51:
cmd 02000000558002272E012491E101014000
dst 1
frame FD0013013302000000558002272E012491E10101400003C6
time 1639309673.34518
53:
cmd 02000000568002272E012491E101014200
dst 1
frame FD0013013502000000568002272E012491E101014200773D
time 1639309688.34587
55:
cmd 02000000578002272E012491E101014200
dst 1
frame FD0013013702000000578002272E012491E1010142002095
time 1639309702.94314
58:
cmd 02000000588002272E012491E101014100
dst 1
frame FD0013013A02000000588002272E012491E1010141004CFD
time 1639309718.97747
61:
cmd 02000000598002272E012491E101014200
dst 1
frame FD0013013D02000000598002272E012491E1010142005511
time 1639309760.11997
63:
cmd 020000005A8002272E012491E101014400
dst 1
frame FD0013013F020000005A8002272E012491E10101440069BA
time 1639309774.558
65:
cmd 020000005B8002272E012491E101014E00
dst 1
frame FD00130141020000005B8002272E012491E101014E00B435
time 1639309789.40694
67:
cmd 020000005C8002272E012491E101014600
dst 1
frame FD00130143020000005C8002272E012491E101014600D29B
time 1639309804.84869
69:
cmd 020000005D8002272E012491E101014F00
dst 1
frame FD00130145020000005D8002272E012491E101014F006360
time 1639309820.13588
72:
cmd 020000005E8002272E012491E101015000
dst 1
frame FD00130148020000005E8002272E012491E1010150004504
time 1639309834.44773
74:
cmd 020000005F8002272E012491E101014F00
dst 1
frame FD0013014A020000005F8002272E012491E101014F00D0AF
time 1639309849.75217
76:
cmd 02000000608002272E012491E101015000
dst 1
frame FD0013014C02000000608002272E012491E101015000E068
time 1639309864.83701
77:
cmd 020000006C8002272E012A02990101C900
dst 1
frame FD0013014D020000006C8002272E012A02990101C900B340
time 1639309865.32328
79:
cmd 02000000618002272E012491E101014F00
dst 1
frame FD0013014F02000000618002272E012491E101014F00E1D4
time 1639309880.15623
81:
cmd 02000000628002272E012491E101015000
dst 1
frame FD0013015102000000628002272E012491E101015000BACA
time 1639309894.89598
82:
cmd 02000000628002272E012491E101015000
dst 1
frame FD0013015202000000628002272E012491E10101500086F6
time 1639309895.20542
85:
cmd 02000000648002272E012491E101015600
dst 1
frame FD0013015502000000648002272E012491E101015600FF9C
time 1639309924.94763
88:
cmd 02000000658002272E012491E101015100
dst 1
frame FD0013015802000000658002272E012491E101015100F6FB
time 1639309954.85306
91:
cmd 02000000668002272E012491E101015100
dst 1
frame FD0013015B02000000668002272E012491E1010151004A47
time 1639309984.36484
95:
cmd 02000000678002272E012491E101015400
dst 1
frame FD0013015F02000000678002272E012491E1010154007B97
time 1639310015.03142
98:
cmd 02000000688002272E012491E101015500
dst 1
frame FD0013016202000000688002272E012491E1010155005836
time 1639310044.94965
LastSendLen:
19
3
Log:
IDs:
PendingCMD:
RoundTrip:
Delay 0.0033879280090332
loadLvl:
lastHistory 1639311596.367
MatchList:
1:CUL_HM ^A......................
Peers:
2293CB +2293CB,00,03,00
23A092 +23A092,00,03,00
2491E1 +2491E1,00,03,00
26A998 +26A998,00,03,00
26B7CA +26B7CA,00,03,00
274741 +274741,00,03,00
29DAC3 +29DAC3,00,03,00
2A0299 +2A0299,00,03,00
31B8E0 +31B8E0,00,03,00
31B9A4 +31B9A4,00,03,00
31BB8E +31BB8E,00,03,00
324024 +324024,00,03,00
43B49E +43B49E,00,03,00
4BEE54 +4BEE54,00,03,00
4BEE5B +4BEE5B,00,03,00
4BEE62 +4BEE62,00,03,00
52ACB5 +52ACB5,00,03,00
57E93C +57E93C,00,03,00
READINGS:
2021-12-11 15:34:55 D-HMIdAssigned 272E01
2021-12-11 15:34:55 D-HMIdOriginal 6BD1D6
2021-12-11 15:34:56 D-firmware 1.4.1
2021-12-11 15:34:56 D-serialNr PEQ2217621
2021-12-11 15:04:32 D-type HM-MOD-UART
2021-12-11 15:34:56 cond ok
2021-12-12 13:22:39 load 16
2021-12-11 15:34:56 loadLvl low
2021-12-11 15:34:34 state opened
helper:
Attributes:
devStateIcon opened:cul_wlan@lime .*:cul_wlan@red
hmId 272E01
hmKey 01:8967FAE2000062C1BFE95800AADEB85A
hmKey2 02:8967FAE2000062C1BFE95800AADEB85A
hmKey3 03:8967FAE2000062C1BFE95800AADEB85A
icon cul_wlan
room Andere->CUL_HM
Internals:
DEF 272E01
FUUID 5cd2e27e-f33f-8098-82e6-d3072d1d4dcb61c7
IODev myHmUART
LASTInputDev myHmUART
MSGCNT 2
NAME vccu
NR 117
NTFY_ORDER 48-vccu
STATE myHmUART:ok
TYPE CUL_HM
assignedIOs myHmUART
channel_01 vccu_Btn1
disableNotifyFn 1
myHmUART_MSGCNT 2
myHmUART_RAWMSG 05000042F7A00343E7E443B49EDB149E5DE1878A6ADB252C310F62A5AE
myHmUART_RSSI -66
myHmUART_TIME 2021-12-11 18:35:19
READINGS:
2021-12-11 15:34:35 IODev myHmUART
2021-12-12 09:42:35 IOopen 1
2021-12-11 15:34:36 cfgState ok
2021-12-03 11:43:15 commState CMDs_done
2021-12-03 11:44:41 hmPair name:Tuer_Wohnung SN:LEQ1060685 model:HM-SEC-SC-2
2021-12-12 09:42:35 state myHmUART:ok
2021-12-11 18:35:19 unknown_43E7E4 received
helper:
HM_CMDNR 105
mId FFF0
peerFriend -
peerOpt -:virtual
regLst
rxType 1
ack:
cmds:
TmplKey :1639233275:1639233275.9692
TmplTs 1639233275.9692
cmdKey 0:1:1::vccu:FFF0:01:
cmdLst:
assignIO -IO- [({set}|unset)]
clear [(readings|rssi|msgEvents|attack|{msgErrors}|unknownDev)]
defIgnUnknown noArg
hmPairForSec [-sec-]
hmPairSerial -serial-
tplSet_0 -tplChan-
update noArg
virtual [(1..50;1|{1})]
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
listDevice noArg
param -param-
expert:
def 1
det 0
raw 1
tpl 0
io:
vccu vccu
ioList:
myHmUART
prefIO:
mRssi:
mNo
peerIDsH:
prt:
bErr 0
sProc 0
q:
qReqConf
qReqStat
role:
dev 1
vrt 1
rssi:
shadowReg:
tmpl:
Attributes:
IOList myHmUART
IOgrp vccu
autoReadReg 5_readMissing
expert defReg,rawReg
model CCU-FHEM
room Andere->CUL_HM
subType virtual
webCmd virtual:update
Hier z.B. sind die Zahnräder grün. COU aber rot.
Internals:
DEF 26A998
FUUID 5cdfe88c-f33f-8098-ca04-bc643245855a0f84
IODev myHmUART
LASTInputDev myHmUART
MSGCNT 60
NAME Tuer_Schlafzimmer
NR 316
NTFY_ORDER 48-Tuer_Schlafzimmer
STATE closed
TYPE CUL_HM
chanNo 01
disableNotifyFn 1
lastMsg No:B6 - t:41 s:26A998 d:272E01 01B500
myHmUART_MSGCNT 60
myHmUART_RAWMSG 05010024B6A64126A998272E0101B500
myHmUART_RSSI -36
myHmUART_TIME 2021-12-12 13:11:38
protLastRcv 2021-12-12 13:11:38
protRcv 60 last_at:2021-12-12 13:11:38
protSnd 60 last_at:2021-12-12 13:11:38
protState CMDs_done
rssi_at_myHmUART cnt:60 min:-39 max:-35 avg:-36.81 lst:-36
READINGS:
2021-12-11 15:44:34 Activity alive
2020-07-13 19:03:38 CommandAccepted yes
from archivexx D-firmware 2.4
from archivexx D-serialNr LEQ0141201
2021-12-12 13:11:38 IODev myHmUART
2021-11-27 11:32:27 PairedTo 0x272E01
2021-12-11 10:05:39 R-cyclicInfoMsg off
2021-12-11 10:05:39 R-eventDlyTime 0 s
2021-12-11 10:05:39 R-pairCentral 0x272E01
2021-12-11 10:05:39 R-sabotageMsg on
2021-12-11 10:05:39 R-sign off
2021-11-27 11:32:27 RegL_00. 00:00 02:01 09:00 0A:27 0B:2E 0C:01 10:01 14:06
2021-11-27 11:32:28 RegL_01. 00:00 08:00 20:60 21:00 22:64 30:06
2021-11-27 11:33:23 alive yes
2021-12-12 13:11:38 battery ok
2021-12-11 15:34:36 cfgState ok
2021-12-12 13:11:38 commState CMDs_done
2021-12-12 13:11:38 contact closed (to vccu)
2021-11-27 11:30:07 powerOn 2021-11-27 11:30:07
2021-11-27 11:33:23 recentStateType info
2021-11-27 11:33:23 sabotageError off
2021-12-12 13:11:38 state closed
2021-12-12 13:11:38 trigger_cnt 181
helper:
HM_CMDNR 182
lastMsgTm 1639311098.43029
mId 002F
peerFriend peerAct,peerVirt
peerIDsState complete
peerOpt 4:threeStateSensor
regLst 0,1,4p
rxType 4
supp_Pair_Rep 0
tmplChg 0
cmds:
TmplKey :1639233275:1639233275.96912
TmplTs 1639233275.96912
cmdKey 1:1:0::Tuer_Schlafzimmer:002F:01:
cmdLst:
assignHmKey noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan -btnNumber- -actChn- [({single})] [({set}|unset)] [actor|remote|both]
peerSmart -peerOpt-
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
tplDel -tplDel-
tplSet_0 -tplChan-
trgEventL -peer- -condition-
trgEventS -peer- -condition-
trgPressL [(-peer-|{all})]
trgPressS [(-peer-|{all})]
unpair noArg
lst:
condition closed,open,tilted
peer
peerOpt Links,Schloss,TeamDev
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 1
det 0
raw 1
tpl 0
io:
flgs 0
newChn +26A998,00,03,00
nextSend 1639311098.72555
rxt 0
vccu vccu
p:
26A998
00
03
00
prefIO:
mRssi:
mNo B6
io:
myHmUART:
-28
-28
peerIDsH:
00000000 broadcast
prt:
bErr 0
sProc 0
rspWait:
q:
qReqConf
qReqStat
role:
chn 1
dev 1
rpt:
IO myHmUART
flg A
ts 1639311098.43029
ack:
HASH(0x669e3f8)
B68002272E0126A9980101C800
rssi:
at_myHmUART:
avg -36.8166666666667
cnt 60
lst -36
max -35
min -39
shadowReg:
tmpl:
Attributes:
IOgrp vccu
actCycle 028:00
actStatus alive
alias Tür Schlafzimmer
autoReadReg 5_readMissing
comment Batteriewechsel
09.10.2019
devStateIcon closed:fts_door_right@LightSkyBlue open:fts_door_right_open@lime
expert defReg,rawReg
firmware 2.4
group Fenster
icon scene_sleeping
model HM-SEC-SC-2
peerIDs 00000000
room Wohnung->Schlafzimmer
serialNr LEQ0141201
subType threeStateSensor
hi,
1. cfgstate=updating bei Tuer_Kueche ist verständlich, da cul_hm auf ein erfogreiches getconfig wartet. => peerUnread
2. der hminfo fehler iERR_IODev_myHmUART ist mir unklar. sieht eigentlich alles gut aus, denke ich.
zeig mal ein "get hminfo configCheck" und ein list vom hminfo device.
3. das rote desired-io-icon hat nichts mit 2. zu tun.
mit existierendem attribut IOgrp, aber ohne prefered io, sollte das icon immer weiss sein.
probier mal meine aktuelle version im anhang, ich denke da hatte ich schon was gefixt.
// color attr IOgrp set attr IODev set none
// --------------------------------------------------------------------------------------------------------
// white no prefered set
// green 1. prefered reading = attr
// yellow 2. prefered
// orange no prefered
// red no prefered (opt none), missing_IODev reading != attr, missing_IODev only red
4. ist fhem aktuell?
5. ist dein hminfotools aktuell?
Danke für die schnelle Antwort.
Zitat1. cfgstate=updating bei Tuer_Kueche ist verständlich, da cul_hm auf ein erfogreiches getconfig wartet. => peerUnread
Was kann ich da tun. GetConfig habe ich schon mehrfach versucht. Da kommt meist zuerst ein Error und beim 2. Versuch (Tür auf/zu ) ist dann der Fehler weg, aber es bleibt trotzdem bei dem Problem. Einen Türkontakt habe ich sogar schon gelöscht und neu angelegt. Keine Besserung.
configCheck done:
peer list incomplete. Use getConfig to read it.
Tuer_Buero:
Tuer_Kueche:
Tuer_Wohnung:
peer not defined
Schloss: id:2470CE01
Schloss: id:2470CE02
Schloss: id:43E7E401
Schloss: id:43E7E402
peerNeedsBurst cannot be determined
HM_2293CB_lock: Schloss
HM_2293CB_unlock: Schloss
HM_57E93C_lock: Schloss
HM_57E93C_unlock: SchlossMein fhem ist aktuell.
Hminfotools muss ja neu sein, ist die aus dem Anhang, oder habe ich da etwas falsch verstanden?
Die Version aus dem Anhang zeigt keine Änderung im Verhalten.
du hast 3 unterschiedliche probleme beschrieben.
1. rotes desired-io-icon
ZitatDie Version aus dem Anhang zeigt keine Änderung im Verhalten.
du hast also weiterhin devices, die rote desired-io-icons zeigen (3. icon von links)?
die neue version sollte nur diesen punkt fixen.
zeige ein screenshot und wie bereits erbeten den tooltip text bei rotem icon.
2. iERR_IODev_myHmUART
dieses "ei" hast du dir selber gelegt mit der "IODev"-ergänzung im hminfo attribut sumERROR.
das list von hminfo fehlt auch noch.
3. peerunread
sniffe das getconfig des fk.
OK, hier ist bei meiner Antwort offenbar einiges schiefgegangen.
Ich hänge hier zuerst mal das Bild an. Bezüglich der anderen Dinge dann leider erst später, muss dringend los.
Tolltiptext hatte ich leider übersehen.
zuz 2.
Im Attribnut steht folgendes:
attr hm sumERROR battery:ok,sabotageError:off,overheat:off,Activity:alive:unknown
Was muss denn da genau weg oder anders?
Hier noch das List:
Internals:
FUUID 5f567cc9-f33f-8098-8f29-6891780b69fa6c3f
NAME hminfo
NOTIFYDEV global
NR 417
NTFY_ORDER 49-hminfo
STATE updated:2021-12-12 23:42:49
TYPE HMinfo
Version 01
iERR_IODev_myHmUART BM_Aussen,BM_Kueche,Badlicht,FB_Alt,Fenster_Kueche,Keymatic_4,Links,Rauch_Bu,Rauch_Ko,Rauch_Wz,Schloss,TMP_Aussen,TMP_HF,Taster,TeamDev,Tuer_Buero,Tuer_Kueche,Tuer_Schlafzimmer,Tuer_Wohnung,vccu
iERR_cfgState_BurstUnknwn HM_2293CB_lock,HM_2293CB_unlock,HM_57E93C_lock,HM_57E93C_unlock
iERR_cfgState_PeerUndef Schloss
iERR_cfgState_updating Tuer_Buero,Tuer_Kueche,Tuer_Wohnung
iERR_sabotageError_on Badlicht
iI_HM_IOdevices vccu>ok:myHmUART;
READINGS:
2021-12-12 23:42:49 CRI__protocol 0
2020-09-07 20:33:13 C_sumDefined entities:32,device:21,channel:27,virtual:4
2021-11-27 11:02:21 ERR_IODev myHmUART:20,
2021-12-12 23:42:49 ERR__protocol 0
2020-09-07 20:33:13 ERR__unreachable 0
2021-12-12 23:42:49 ERR_battery 0
2021-12-12 23:42:49 ERR_cfgState updating:3,BurstUnknwn:4,PeerUndef:1,
2021-11-03 18:21:02 ERR_sabotageError on:1,
2021-12-12 23:12:08 I_actTotal alive:12,dead:0,unkn:1,off:0
2020-09-07 20:33:13 I_autoReadPend 0
2021-12-12 23:42:49 I_rssiMinLevel 59<:2 60>:0 80>:0 99>:0
2021-09-07 19:36:47 I_sum_battery ok:17,
2021-11-03 18:21:02 I_sum_sabotageError off:6,on:1,
2021-12-12 23:42:49 W__protocol 0
2021-12-12 23:42:49 lastErrChange updated:2021-12-12 23:42:49
helper:
cfgChkResult configCheck done:-ret-
weekplanListDef ./tempList.cfg
weekplanListDir ./
lastList:
weekplanList:
nb:
cnt 3
Attributes:
autoArchive 1
autoLoadArchive 1_load
room Andere->CUL_HM
sumERROR battery:ok,sabotageError:off,powerError:ok,overload:off,overheat:off,reduced:off,motorErr:ok,error:none,uncertain:[no|yes],smoke_detect:none,cover:closed,IODev:ok,cfgState:ok
sumStatus battery,sabotageError,powerError,motor
webCmd update:protoEvents short:rssi:peerXref:configCheck:models
mit der angehängten version sollten jetzt auch bei dir alle desired-io-icons weiss werden, wenn IOgrp ohne prefered io gesetzt ist und das aktuelle io im attr IOList der vccu enthalten ist.
tipps:
1.
lösche den zusatz "IODev:ok" (plus ein komma natürlich) im attr hminfo sumERROR. dann verschwinden auch die "IODev"-fehler.
da hast du sicherlich meinen workaround genutzt, um zusätzlich auch alle devices angezeigt zu bekommen, die keine fehler haben. das lässt sich ja seit kurzem besser machen:
Zitatmit einem userattr im modul hminfo können zusätzlich auch alle devices angezeigt werden, die keine fehler melden. folgendes userattr erzeugen und anschliessend auf "all" setzen. default ist "err".
attr hminfo userattr HMinfoTools_deviceMode:err,all
sobald HMinfoTools das attribut erkennt, wird in der ersten zeile ganz rechts eine checkbox dargestellt, mit der man bequem das attribut toggeln kann. das erzeugt natürlich ein rotes fragezeichen im fhem menü neben "Save config".
2.
über die rssi-table (zahnrad oben ganz rechts) kannst du mit 2 klicks bei allen dort auftauchenden devices dein io als prefered io setzen, wodurch die icons dann grün zeigen würden. mit nur einem io in der vccu natürlich technisch kein unterschied.
1. klick auf "All Changed On" => alle eingabe elemente mit geändertem IOgrp werden aktiviert
2. klick auf "Set IOgrp" => setzt alle aktivierten eingaben für die jeweiligen attr IOgrp.
vorher mal checken, ob die empfehlungen korrekt sind.
dort tauchen natürlich nur devices auf, von denen fhem seit restart bereits rssi werte empfangen hat. ausserdem erscheinen die input elemente nur bei den devices, die in HMinfoTools angezeigt werden. also vor dem öffnen der tabelle ggf das attr HMinfoTools_deviceMode=all setzen.
Danke dir sehr. Habe alle Tipps umgesetzt und es sieht nun sehr gut aus bei mir. S. Bild unten.
Nur die TK/FK Probleme sind noch da. Hierzu die Lists:
2021-12-13 09:26:02 CUL_HM Tuer_Buero commState: CMDs_pending
2021-12-13 09:26:02 CUL_HM Tuer_Buero cfgState: updating
2021-12-13 09:26:02 CUL_HM Tuer_Buero cfgState: updating
2021-12-13 09:26:02 CUL_HM Tuer_Buero commState: CMDs_pending
2021-12-13 09:26:02 CUL_HM Tuer_Buero commState: CMDs_pending
2021-12-13 09:26:12 CUL_HM Tuer_Buero battery: ok
2021-12-13 09:26:12 CUL_HM Tuer_Buero commState: CMDs_processing...
2021-12-13 09:26:12 CUL_HM Tuer_Buero contact: closed (to vccu)
2021-12-13 09:26:12 CUL_HM Tuer_Buero closed
2021-12-13 09:26:12 CUL_HM Tuer_Buero trigger_cnt: 51
2021-12-13 09:26:12 CUL_HM Tuer_Buero commState: CMDs_processing...
2021-12-13 09:26:18 CUL_HM Tuer_Buero ResndFail
2021-12-13 09:26:18 CUL_HM Tuer_Buero commState: CMDs_done_Errors:1
2021-12-13 09:26:18 CUL_HM Tuer_Buero RESPONSE TIMEOUT:RegisterRead
2021-12-13 09:26:20 DOIF DI_Tuerwarnung_30_Sekunden wait_timer: 13.12.2021 09:27:05 cmd_1 Tuer_Buero
2021-12-13 09:26:20 CUL_HM Tuer_Buero battery: ok
2021-12-13 09:26:20 CUL_HM Tuer_Buero commState: CMDs_done
2021-12-13 09:26:20 CUL_HM Tuer_Buero contact: open (to vccu)
2021-12-13 09:26:20 CUL_HM Tuer_Buero open
2021-12-13 09:26:20 CUL_HM Tuer_Buero trigger_cnt: 52
2021-12-13 09:26:48 CUL_HM Tuer_Buero battery: ok
2021-12-13 09:26:48 CUL_HM Tuer_Buero commState: CMDs_done
2021-12-13 09:26:48 CUL_HM Tuer_Buero contact: closed (to vccu)
2021-12-13 09:26:48 CUL_HM Tuer_Buero closed
2021-12-13 09:26:48 CUL_HM Tuer_Buero trigger_cnt: 53
2021-12-13 09:26:51 DOIF DI_Tuerwarnung_30_Sekunden wait_timer: 13.12.2021 09:27:36 cmd_1 Tuer_Buero
2021-12-13 09:26:51 CUL_HM Tuer_Buero battery: ok
2021-12-13 09:26:51 CUL_HM Tuer_Buero commState: CMDs_done
2021-12-13 09:26:51 CUL_HM Tuer_Buero contact: open (to vccu)
2021-12-13 09:26:51 CUL_HM Tuer_Buero open
2021-12-13 09:26:51 CUL_HM Tuer_Buero trigger_cnt: 54
2021.12.13 09:26:02 3: CUL_HM set Tuer_Buero getConfig noArg
2021.12.13 09:28:44 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:28:44 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:28:44 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:28:44 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:28:44 5: CUL_HM get Tuer_Buero ?
2021.12.13 09:28:45 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:28:45 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 3: CUL_HM set Tuer_Buero getConfig noArg
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM Tuer_Buero protEvent:CMDs_pending pending:1
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM Tuer_Buero protEvent:CMDs_pending pending:2
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM Tuer_Buero protEvent:CMDs_pending pending:3
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM get Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:04 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:05 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM Tuer_Buero prep ACK for 01
2021.12.13 09:29:11 5: CUL_HM Tuer_Buero protEvent:CMDs_processing... pending:3
2021.12.13 09:29:11 5: CUL_HM Tuer_Buero sent ACK:2
2021.12.13 09:29:11 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:11 5: CUL_HM Tuer_Buero protEvent:CMDs_processing... pending:2
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM Tuer_Buero protEvent:CMDs_done_Errors:1
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:16 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:22 5: CUL_HM Tuer_Buero prep ACK for 01
2021.12.13 09:29:22 5: CUL_HM Tuer_Buero protEvent:CMDs_done
2021.12.13 09:29:22 5: CUL_HM Tuer_Buero sent ACK:2
2021.12.13 09:29:22 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:22 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:22 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:28 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:28 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:28 5: CUL_HM get Tuer_Buero ?
2021.12.13 09:29:28 5: CUL_HM set Tuer_Buero ?
2021.12.13 09:29:28 5: CUL_HM set Tuer_Buero ?
Sorry, List vom hminfo war vvom Vormittag. Hier das aktuelle List noch den Änderungen mit deinem geänderten Modul
Internals:
FUUID 5f567cc9-f33f-8098-8f29-6891780b69fa6c3f
NAME hminfo
NOTIFYDEV global
NR 417
NTFY_ORDER 49-hminfo
STATE updated:2021-12-13 14:48:03
TYPE HMinfo
Version 01
iERR_cfgState_BurstUnknwn HM_2293CB_lock,HM_2293CB_unlock,HM_57E93C_lock,HM_57E93C_unlock
iERR_cfgState_PeerUndef Schloss
iERR_cfgState_updating Tuer_Buero,Tuer_Kueche,Tuer_Wohnung
iERR_sabotageError_on Badlicht
iI_HM_IOdevices vccu>ok:myHmUART;
iW__protoNames Links
READINGS:
2021-12-13 14:48:03 CRI__protocol 0
2020-09-07 20:33:13 C_sumDefined entities:32,device:21,channel:27,virtual:4
2021-12-13 14:48:03 ERR__protocol 0
2020-09-07 20:33:13 ERR__unreachable 0
2021-12-13 14:48:03 ERR_battery 0
2021-12-13 14:36:43 ERR_cfgState BurstUnknwn:4,updating:3,PeerUndef:1,
2021-11-03 18:21:02 ERR_sabotageError on:1,
2021-12-13 14:36:43 I_actTotal alive:13,dead:0,unkn:0,off:0
2020-09-07 20:33:13 I_autoReadPend 0
2021-12-13 14:48:03 I_rssiMinLevel 59<:4 60>:2 80>:0 99>:0
2021-09-07 19:36:47 I_sum_battery ok:17,
2021-11-03 18:21:02 I_sum_sabotageError off:6,on:1,
2021-12-13 14:36:43 W__protocol Resnd:1
2021-12-13 14:48:03 lastErrChange updated:2021-12-13 14:48:03
helper:
cfgChkResult configCheck done:-ret-
weekplanListDef ./tempList.cfg
weekplanListDir ./
lastList:
iERR_IODev_myHmUART BM_Aussen,BM_Kueche,Badlicht,FB_Alt,Fenster_Kueche,Keymatic_4,Links,Rauch_Bu,Rauch_Ko,Rauch_Wz,Schloss,TMP_Aussen,TMP_HF,Taster,TeamDev,Tuer_Buero,Tuer_Kueche,Tuer_Schlafzimmer,Tuer_Wohnung,vccu
iERR_cfgState_BurstUnknwn HM_2293CB_lock,HM_2293CB_unlock,HM_57E93C_lock,HM_57E93C_unlock
iERR_cfgState_PeerUndef Schloss
iERR_cfgState_updating Tuer_Buero,Tuer_Kueche,Tuer_Wohnung
iERR_sabotageError_on Badlicht
iW__protoNames Links
weekplanList:
nb:
cnt 0
Attributes:
HMinfoTools_deviceMode all
autoArchive 1
autoLoadArchive 1_load
room Andere->CUL_HM
sumERROR battery:ok,sabotageError:off,powerError:ok,overload:off,overheat:off,reduced:off,motorErr:ok,error:none,uncertain:[no|yes],smoke_detect:none,cover:closed,cfgState:ok
sumStatus battery,sabotageError,powerError,motor
userattr HMinfoTools_deviceMode:err,all
webCmd update:protoEvents short:rssi:peerXref:configCheck:models/code[]
Ich habe jezt mal einen TK komplett auf Werkseinstellungen zurückgesetzt und neu angelernt (7 Sekunden rot, 7 Sekunden rot, blabla.
Nun ist alles grün. Mal sehen, wie lange das anhält. Ich hatte das vor einigen Tagen schon einmal probiert, da war dann aber irgendwann wieder orange. Vielleicht klappt es ja nun damit.
zeig mal ein "get list full" von dem jetzt.
wenn es wieder probleme gibt, musst du das getconfig sniffen, wie hier beschrieben:
https://wiki.fhem.de/wiki/HomeMatic_Nachrichten_sniffen (https://wiki.fhem.de/wiki/HomeMatic_Nachrichten_sniffen)
Zitatzeig mal ein "get list full" von dem jetzt.
Ich hoffe, dich richtig verstanden zu haben? Falls nicht, bitte noch einmal melden.
Das ist jetzt der Türkontakt, den ich neu eingerichtet hatten
2021.12.13 16:01:34 0: HMUARTLGW myHmUART recv: 01 05 01 00 2E msg: F2 A4 41 23A092 272E01 015AC8
2021.12.13 16:01:34 0: HMUARTLGW myHmUART send: 01 02 00 00 00 msg: F2 80 02 272E01 23A092 0101C800
2021.12.13 16:01:37 0: HMUARTLGW myHmUART recv: 01 05 01 00 2D msg: F3 A4 41 23A092 272E01 015B00
2021.12.13 16:01:37 0: HMUARTLGW myHmUART send: 01 02 00 00 00 msg: F3 80 02 272E01 23A092 0101C800
.AttrList .devInfo .mId .stc IODev IOgrp actCycle actStatus aesCommReq:1,0 aesKey:5,4,3,2,1,0 autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto commStInCh:on,off do_not_notify:1,0 dummy:1,0 event-aggregator event-min-interval event-on-change-reading event-on-update-reading expert:multiple,defReg,allReg,rawReg,templ,none firmware hmKey hmKey2 hmKey3 hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger ignore:1,0 levelMap levelRange model modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-2-PBU-FM-2,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 msgRepeat oldreadings param peerIDs readOnly:0,1 readingOnDead:multiple,noChange,state,periodValues,periodString,channels rssiLog:1,0 serialNr showtime:1,0 stateFormat:textField-long subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic timestamp-on-change-reading
DEF 23A092
FUUID 5cd57381-f33f-8098-9517-9ea31b9971fbdc1d
IODev myHmUART
LASTInputDev myHmUART
MSGCNT 45
NAME Tuer_Buero
NR 129
NTFY_ORDER 48-Tuer_Buero
STATE closed
TYPE CUL_HM
chanNo 01
disableNotifyFn 1
lastMsg No:F3 - t:41 s:23A092 d:272E01 015B00
myHmUART_MSGCNT 45
myHmUART_RAWMSG 0501002DF3A44123A092272E01015B00
myHmUART_RSSI -45
myHmUART_TIME 2021-12-13 16:01:37
protLastRcv 2021-12-13 16:01:37
protRcv 45 last_at:2021-12-13 16:01:37
protSnd 43 last_at:2021-12-13 16:01:37
protState CMDs_done
rssi_at_myHmUART cnt:45 min:-48 max:-30 avg:-40.15 lst:-45
.attraggr:
.attrminint:
CL:
Authenticated 0
BUF
FD 67
FW_ID 3615
LASTACCESS 1639408074
NAME WEB_192.168.178.54_58076
NR 3822
PEER 192.168.178.54
PORT 58076
SNAME WEB
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
.attraggr:
.attrminint:
READINGS:
2021-12-13 16:07:54 state Connected
READINGS:
2021-12-13 15:16:12 .D-devInfo 810101
2021-12-13 15:16:12 .D-stc 80
2021-12-13 14:35:54 .R-ledOnTime 0.5 s
2021-12-13 14:35:54 .R-msgScPosA closed
2021-12-13 14:35:54 .R-msgScPosB open
2021-12-13 14:35:54 .R-transmDevTryMax 6
2021-12-13 14:35:54 .R-transmitTryMax 6
2021-12-13 15:16:17 .associatedWith Tuer_Buero,Tuer_Buero
2021-12-13 15:16:15 .peerListRDate 2021-12-13 15:16:15
2021-12-13 16:01:37 .protLastRcv 20211213160137
2021-12-13 15:18:03 Activity alive
2021-12-13 15:16:13 CommandAccepted yes
2021-12-13 15:16:12 D-firmware 2.1
2021-12-13 15:16:12 D-serialNr KEQ0885496
2021-12-13 16:01:37 IODev myHmUART
2021-12-13 15:16:14 PairedTo 0x272E01
2021-12-13 15:11:49 R-cyclicInfoMsg off
2021-12-13 14:35:54 R-eventDlyTime 0 s
2021-12-13 15:16:14 R-pairCentral 0x272E01
2021-12-13 14:35:54 R-sabotageMsg on
2021-12-13 14:35:54 R-sign off
2021-12-13 15:16:14 RegL_00. 00:00 02:01 09:00 0A:27 0B:2E 0C:01 10:01 14:06
2021-12-13 15:16:14 RegL_01. 00:00 08:00 20:60 21:00 22:64 30:06
2021-12-13 15:18:19 alive yes
2021-12-13 16:01:37 battery ok
2021-12-13 15:17:15 cfgState ok
2021-12-13 16:01:37 commState CMDs_done
2021-12-13 16:01:37 contact closed (to vccu)
2021-08-08 03:28:18 powerOn 2021-08-08 03:28:18
2021-12-13 15:18:19 recentStateType info
2021-12-13 15:18:19 sabotageError off
2021-12-13 16:01:37 state closed
2021-12-13 16:01:37 trigger_cnt 91
helper:
HM_CMDNR 243
cSnd 01272E0123A09201040000000001,01272E0123A0920103
cfgStateUpdt 0
lastMsgTm 1639407697.29153
mId 002F
peerFriend peerAct,peerVirt
peerIDsRaw ,00000000
peerIDsState complete
peerOpt 4:threeStateSensor
regLst 0,1,4p
rxType 4
supp_Pair_Rep 0
tmplChg 0
cmds:
TmplKey :1639402554:1639404977.65208
TmplTs 1639404977.65208
cmdKey 1:1:0::Tuer_Buero:002F:01:
cmdLst:
assignHmKey noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan -btnNumber- -actChn- [({single})] [({set}|unset)] [actor|remote|both]
peerSmart -peerOpt-
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
tplDel -tplDel-
tplSet_0 -tplChan-
trgEventL -peer- -condition-
trgEventS -peer- -condition-
trgPressL [(-peer-|{all})]
trgPressS [(-peer-|{all})]
unpair noArg
lst:
condition closed,open,tilted
peer
peerOpt Links,Schloss,TeamDev
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 1
det 0
raw 1
tpl 0
io:
flgs 0
newChn +23A092,00,03,00
nextSend 1639407697.52154
rxt 0
vccu vccu
p:
23A092
00
03
00
prefIO:
mRssi:
mNo F3
io:
myHmUART:
-37
-37
peerIDsH:
00000000 broadcast
prt:
bErr 0
sProc 0
rspWait:
tryMsg:
q:
qReqConf
qReqStat
regCollect:
role:
chn 1
dev 1
rpt:
IO myHmUART
flg A
ts 1639407697.29153
ack:
HASH(0x416fac0)
F38002272E0123A0920101C800
rssi:
at_myHmUART:
avg -40.1555555555556
cnt 45
lst -45
max -30
min -48
shadowReg:
tmpl:
Attributes:
.mId 002F
IOgrp vccu:myHmUART
actCycle 028:00
actStatus alive
alias Tür Büro
autoReadReg 5_readMissing
devStateIcon closed:fts_door_right@LightSkyBlue open:fts_door_right_open@lime
expert defReg,rawReg
firmware 2.1
model HM-SEC-SC
peerIDs 00000000
room Wohnung->Büro
serialNr KEQ0885496
subType threeStateSensor
dein sniff zeigt ja nur auf und zu.
ausserdem das globale attr für mili sekunden einschalten, um ggf schlechtes timing aufspüren zu können.
solche sniffs musst du dann von den aktionen posten, die nicht funktionieren.
mseclog habe ich nun eingeschaltet.
Die bösen Türkontakte habe ich auf Werksreset zurückgesetzt und neu angelernt. Seitdem ist bei mir alles grün. Die orangen Zahnräder sind also grün.
Somit scheint sich das Thema vorerst erledigt zu haben.
Sollten sich die Fehler erneut einstellen, werde ich mich wieder melden.
Ich danke dir sehr für die geduldige, intensive Hilfe.