Hallo,
ich habe heute mal wieder ein Update auf HMCCU 5.x versucht und bekomme immer noch Fehler. Ich hatte bis dato die Dateien vom Update excluded, weil es damals schon Fehler gab.
Gleich nach dem Start von FHEM bekomme ich die folgenden Fehler:
Messages collected while initializing FHEM:configfile: HMCCU: [myHmCCU] Ignored attribute eventMap because it contains only obsolet rpcserver entries
myHmCCU: unknown attribute rpcport. Type 'attr myHmCCU ?' for a detailed list.
Und wenn ich dann versuche ein Gerät einzuschalten, erhalte ich die folgende Meldung:
HMCCUDEV: Badezimmer_Beleuchtung No control channel defined
list Badezimmer_Beleuchtung
[code]Internals:
DEF 001A58A9A27BC3
FUUID 5d713de2-f33f-88c1-bf32-5ce7feae46be2ccc
IODev myHmCCU
NAME Badezimmer_Beleuchtung
NR 361
STATE off
TYPE HMCCUDEV
ccuaddr 001A58A9A27BC3
ccudevstate active
ccuif HmIP-RF
ccuname Badezimmer_Beleuchtung
ccusubtype BSL
ccutype HmIP-BSL
firmware 1.0.2
readonly no
READINGS:
2022-03-30 07:57:09 1.PRESS_LONG 1
2022-03-30 07:57:09 1.PRESS_LONG_RELEASE 1
2022-03-30 07:57:09 1.PRESS_LONG_START 1
2022-04-02 20:28:13 1.PRESS_SHORT 1
2022-04-02 20:34:37 10.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 10.COLOR black
2022-04-02 20:34:37 10.COLOR_STATUS NORMAL
2022-04-02 20:34:37 10.LEVEL off
2022-04-02 20:34:37 10.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 11.ACTIVITY_STATE UNKNOWN
2022-04-02 20:34:37 11.COLOR black
2022-04-02 20:34:37 11.COLOR_STATUS NORMAL
2022-04-02 20:34:37 11.LEVEL on
2022-04-02 20:34:37 11.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 12.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 12.COLOR black
2022-04-02 20:34:37 12.COLOR_STATUS NORMAL
2022-04-02 20:34:37 12.LEVEL on
2022-04-02 20:34:37 12.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 13.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 13.COLOR black
2022-04-02 20:34:37 13.COLOR_STATUS NORMAL
2022-04-02 20:34:37 13.LEVEL off
2022-04-02 20:34:37 13.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 14.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 14.COLOR black
2022-04-02 20:34:37 14.COLOR_STATUS NORMAL
2022-04-02 20:34:37 14.LEVEL off
2022-04-02 20:34:37 14.LEVEL_STATUS NORMAL
2022-02-23 12:46:22 2.PRESS_LONG 1
2022-02-23 12:46:23 2.PRESS_LONG_RELEASE 1
2022-02-23 12:46:22 2.PRESS_LONG_START 1
2022-04-02 20:26:55 2.PRESS_SHORT 1
2022-04-02 20:34:37 3.STATE off
2022-04-02 20:34:37 4.STATE off
2022-04-02 20:34:37 5.STATE off
2022-04-02 20:34:37 6.STATE off
2022-04-02 20:34:37 7.ACTIVITY_STATE UNKNOWN
2022-04-02 20:34:37 7.COLOR black
2022-04-02 20:34:37 7.COLOR_STATUS NORMAL
2022-04-02 20:34:37 7.LEVEL off
2022-04-02 20:34:37 7.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 8.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 8.COLOR black
2022-04-02 20:34:37 8.COLOR_STATUS NORMAL
2022-04-02 20:34:37 8.LEVEL off
2022-04-02 20:34:37 8.LEVEL_STATUS NORMAL
2022-04-02 20:34:37 9.ACTIVITY_STATE STABLE
2022-04-02 20:34:37 9.COLOR black
2022-04-02 20:34:37 9.COLOR_STATUS NORMAL
2022-04-02 20:34:37 9.LEVEL off
2022-04-02 20:34:37 9.LEVEL_STATUS NORMAL
2022-04-02 20:33:44 IODev myHmCCU
2022-04-02 20:34:37 activity alive
2021-11-09 13:37:03 color black
2022-04-02 20:31:43 control off
2022-04-02 20:34:37 devstate ok
2022-04-02 20:34:37 hmstate off
2021-11-09 13:37:03 pct 1
2022-04-02 20:34:37 rssidevice 198
2022-04-02 20:34:37 rssipeer 201
2022-04-02 20:34:37 state off
2022-04-02 20:34:37 voltage 0
hmccu:
channels 16
detect 5
devspec 001A58A9A27BC3
forcedev 0
nodefaults 1
role 0:MAINTENANCE,1:KEY_TRANSCEIVER,2:KEY_TRANSCEIVER,3:SWITCH_TRANSMITTER,4:SWITCH_VIRTUAL_RECEIVER,5:SWITCH_VIRTUAL_RECEIVER,6:SWITCH_VIRTUAL_RECEIVER,7:DIMMER_TRANSMITTER,8:DIMMER_VIRTUAL_RECEIVER,9:DIMMER_VIRTUAL_RECEIVER,10:DIMMER_VIRTUAL_RECEIVER,11:DIMMER_TRANSMITTER,12:DIMMER_VIRTUAL_RECEIVER,13:DIMMER_VIRTUAL_RECEIVER,14:DIMMER_VIRTUAL_RECEIVER,15:DIMMER_WEEK_PROFILE
setDefaults 0
cmdlist:
get
set on-till off:noArg on:noArg on-for-timer on-till off:noArg on:noArg on-for-timer on-till off:noArg on:noArg on-for-timer color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg color:BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE oldLevel:noArg pct on-till off:noArg level on-for-timer up down on:noArg progMode:MANU_MODE,AUTO_MODE_WITH_RESET,AUTO_MODE_WITHOUT_RESET
control:
dp:
0.ACTUAL_TEMPERATURE:
VALUES:
NVAL 28
ONVAL 28
OSVAL 28
OVAL 28.000000
SVAL 28
VAL 28.000000
0.CONFIG_PENDING:
VALUES:
NVAL false
ONVAL false
OSVAL false
OVAL false
SVAL false
VAL false
0.DUTY_CYCLE:
VALUES:
NVAL false
ONVAL false
OSVAL false
OVAL false
SVAL false
VAL false
0.ERROR_CODE:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
0.ERROR_OVERHEAT:
VALUES:
NVAL false
ONVAL false
OSVAL false
OVAL false
SVAL false
VAL false
0.INSTALL_TEST:
VALUES:
NVAL true
ONVAL true
OSVAL true
OVAL true
SVAL true
VAL true
0.OPERATING_VOLTAGE:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0.000000
SVAL 0
VAL 0.000000
0.OPERATING_VOLTAGE_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
0.RSSI_DEVICE:
VALUES:
NVAL 198
ONVAL 198
OSVAL 198
OVAL 198
SVAL 198
VAL 198
0.RSSI_PEER:
VALUES:
NVAL 201
ONVAL 201
OSVAL 201
OVAL 201
SVAL 201
VAL 201
0.UNREACH:
VALUES:
NVAL false
ONVAL false
OSVAL alive
OVAL false
SVAL alive
VAL false
0.UPDATE_PENDING:
VALUES:
NVAL false
ONVAL false
OSVAL false
OVAL false
SVAL false
VAL false
10.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
10.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
10.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
10.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
10.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
10.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
10.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
10.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
11.ACTIVITY_STATE:
VALUES:
NVAL 0
ONVAL 0
OSVAL UNKNOWN
OVAL 0
SVAL UNKNOWN
VAL 0
11.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
11.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
11.LEVEL:
VALUES:
NVAL 100
ONVAL 100
OSVAL on
OVAL 1.000000
SVAL on
VAL 1.000000
11.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
11.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
11.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
11.SECTION_STATUS:
VALUES:
NVAL 1
ONVAL 1
OSVAL UNKNOWN
OVAL 1
SVAL UNKNOWN
VAL 1
12.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
12.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
12.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
12.LEVEL:
VALUES:
NVAL 100
ONVAL 100
OSVAL on
OVAL 1.000000
SVAL on
VAL 1.000000
12.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
12.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
12.SECTION:
VALUES:
NVAL 3
ONVAL 3
OSVAL 3
OVAL 3
SVAL 3
VAL 3
12.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
13.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
13.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
13.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
13.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
13.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
13.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
13.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
13.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
14.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
14.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
14.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
14.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
14.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
14.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
14.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
14.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
15.WEEK_PROGRAM_CHANNEL_LOCKS:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
3.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
3.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
3.SECTION_STATUS:
VALUES:
NVAL 1
ONVAL 1
OSVAL UNKNOWN
OVAL 1
SVAL UNKNOWN
VAL 1
3.STATE:
VALUES:
NVAL false
ONVAL false
OSVAL off
OVAL false
SVAL off
VAL false
4.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
4.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
4.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
4.STATE:
VALUES:
NVAL false
ONVAL false
OSVAL off
OVAL false
SVAL off
VAL false
5.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
5.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
5.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
5.STATE:
VALUES:
NVAL false
ONVAL false
OSVAL off
OVAL false
SVAL off
VAL false
6.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
6.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
6.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
6.STATE:
VALUES:
NVAL false
ONVAL false
OSVAL off
OVAL false
SVAL off
VAL false
7.ACTIVITY_STATE:
VALUES:
NVAL 0
ONVAL 0
OSVAL UNKNOWN
OVAL 0
SVAL UNKNOWN
VAL 0
7.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
7.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
7.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
7.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
7.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
7.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
7.SECTION_STATUS:
VALUES:
NVAL 1
ONVAL 1
OSVAL UNKNOWN
OVAL 1
SVAL UNKNOWN
VAL 1
8.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
8.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
8.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
8.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
8.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
8.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
8.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
8.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
9.ACTIVITY_STATE:
VALUES:
NVAL 3
ONVAL 3
OSVAL STABLE
OVAL 3
SVAL STABLE
VAL 3
9.COLOR:
VALUES:
NVAL 0
ONVAL 0
OSVAL black
OVAL 0
SVAL black
VAL 0
9.COLOR_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
9.LEVEL:
VALUES:
NVAL 0
ONVAL 0
OSVAL off
OVAL 0.000000
SVAL off
VAL 0.000000
9.LEVEL_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
9.PROCESS:
VALUES:
NVAL 0
ONVAL 0
OSVAL STABLE
OVAL 0
SVAL STABLE
VAL 0
9.SECTION:
VALUES:
NVAL 0
ONVAL 0
OSVAL 0
OVAL 0
SVAL 0
VAL 0
9.SECTION_STATUS:
VALUES:
NVAL 0
ONVAL 0
OSVAL NORMAL
OVAL 0
SVAL NORMAL
VAL 0
roleCmds:
get:
set:
color:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:COLOR:#color
usage color {BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE}
subcmd:
000:
args BLACK,BLUE,GREEN,TURQUOISE,RED,PURPLE,YELLOW,WHITE
dpt COLOR
fnc
max 7
min 0
parname color
partype 1
ps VALUES
scn 000
unit
look:
BLACK 0
BLUE 1
GREEN 2
PURPLE 5
RED 4
TURQUOISE 3
WHITE 7
YELLOW 6
down:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:LEVEL:?delta=-10
usage down [delta]
subcmd:
000:
args -10
dpt LEVEL
fnc
max 1.01
min 0.0
parname delta
partype 2
ps VALUES
scn 000
unit 100%
level:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:LEVEL:?level
usage level level
subcmd:
000:
args
dpt LEVEL
fnc
max 1.01
min 0.0
parname level
partype 2
ps VALUES
scn 000
unit 100%
off:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:LEVEL:0
usage off
subcmd:
000:
args 0
dpt LEVEL
fnc
max 1.01
min 0.0
parname LEVEL
partype 3
ps VALUES
scn 000
unit 100%
oldLevel:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:LEVEL:100.5
usage oldLevel
subcmd:
000:
args 100.5
dpt LEVEL
fnc
max 1.01
min 0.0
parname LEVEL
partype 3
ps VALUES
scn 000
unit 100%
on:
channel ?
role DIMMER_VIRTUAL_RECEIVER
subcount 1
syntax V:LEVEL:100
usage on
subcmd:
000:
args 100
dpt LEVEL
fnc
max 1.01
min 0.0
parname LEVEL
partype 3
ps VALUES
scn 000
unit 100%
on-for-timer:
channel ?
role DIMMER_VIRTUAL_RECEIVER
Hallo,
das wurde hier schon mehrfach beschrieben. Die Suche sollte helfen.
Auch im Wiki ist eine Info zu finden
https://wiki.fhem.de/wiki/HMCCU (https://wiki.fhem.de/wiki/HMCCU)
Viele Grüße
Jürgen
rpcport gibt es nicht mehr. Die Schnittstellen werden nur noch per rpcinterfaces festgelegt.
Lösche einfach mal alle HMCCURPCPROC Devices. Wähle die gewünschten Schnittstellen mit rpcinterfaces aus. Config speichern und neu starten. Dann sollten die HMCCURPCPROC Devices neu angelegt werden.
Zitat von: zap am 03 April 2022, 17:50:44
rpcport gibt es nicht mehr. Die Schnittstellen werden nur noch per rpcinterfaces festgelegt.
Lösche einfach mal alle HMCCURPCPROC Devices. Wähle die gewünschten Schnittstellen mit rpcinterfaces aus. Config speichern und neu starten. Dann sollten die HMCCURPCPROC Devices neu angelegt werden.
Hallo zap,
vielen Dank erstmal! Meinst du es so?
Folgende Interfaces löschen:
- d_rpc001013BidCos_RF
- d_rpc001013HmIP_RF
- 2x rpcinterface anlegen, speichern, restart
Muss ich dann auch noch das attr rpcport löschen?
Die bereits angelegten Lichtschalter im FHEM aus der CCU2 sollten dann danach wieder ohne weitere Änderungen funktionieren?
Besten Dank & Gruß
Fabian
Keine HMCCURPCPROC anlegen, das macht HMCCu beim Start automatisch. Nur das Attribut rpcinterfaces setzen.
Vielen Dank für die Hilfe. Ich musste allerdings die Devices aus der CCU neu anlegen lassen.
Aber jetzt klappt alles :D