Hallo zusammen,
bei mir funktioniert das automatische schließen nicht mehr, mir ist es jetzt erst aufgefallen, seitdem es Abends wieder etwas heller ist. Ich hab 2 separate FHEM-Installationen in 2 Haushalten und finde den Fehler einfach nicht. Vielleicht hat jemand einen Tipp für mich? Ich vermute irgendwas habe ich verändert, sodass ASC nicht mehr möchte :-\
Der Rolladen hätte heute um 19:48:34 schließen sollen - hat er aber leider nicht
ASC Device
Internals:
FUUID 62546305-f33f-7807-f150-631108997ce3e483
FVERSION 73_AutoShuttersControl.pm:v0.10.23-s25934/2022-04-07
MID da39a3ee5e6b4b0d3255bfef95601890afd80709
NAME asc
NOTIFYDEV asc,astro,global,shelly2.01,shelly2.02,shelly2.03,shelly2.04
NR 126
NTFY_ORDER 51-asc
STATE manual
TYPE AutoShuttersControl
VERSION v0.10.23
OLDREADINGS:
READINGS:
2022-04-11 19:24:42 ascEnable on
2022-04-11 19:24:42 controlShading off
2022-04-11 19:24:42 hardLockOut off
2022-04-11 19:24:42 room__ExternalDevices-_Shelly2__Rolladen__ExternalDevices-_Alexa-Devices shelly2.01,shelly2.02,shelly2.03,shelly2.04
2022-04-11 19:24:42 selfDefense off
2022-04-11 20:01:15 shelly2.01_PosValue 100
2022-04-11 19:48:34 shelly2.01_nextAstroTimeEvent 12.04.2022 - 06:47
2022-04-11 20:01:14 shelly2.02_PosValue 100
2022-04-11 19:48:34 shelly2.02_nextAstroTimeEvent 12.04.2022 - 06:47
2022-04-11 20:01:15 shelly2.03_PosValue 100
2022-04-11 19:48:34 shelly2.03_nextAstroTimeEvent 12.04.2022 - 06:47
2022-04-11 20:01:14 shelly2.04_PosValue 100
2022-04-11 19:48:34 shelly2.04_nextAstroTimeEvent 12.04.2022 - 06:47
2022-04-11 20:01:15 state manual
2022-04-11 19:24:42 sunriseTimeWeHoliday off
2022-04-11 19:24:42 userAttrList rolled out
helper:
shuttersList:
shelly2.01
shelly2.02
shelly2.03
shelly2.04
monitoredDevs:
astro:
asc ASC_twilightDevice
shelly2.01:
shelly2.02:
shelly2.03:
shelly2.04:
Attributes:
ASC_autoAstroModeEvening HORIZON
ASC_autoAstroModeEveningHorizon 2
ASC_autoShuttersControlEvening on
ASC_expert 1
ASC_twilightDevice astro
devStateIcon { ShuttersControl_DevStateIcon($name) }
icon fts_shutter_automatic
room _Rolladen
Exemplarisch ein Rollladen:
Internals:
CID shellyswitch25_485519032A2C
DEF shellyswitch25_485519032A2C
FUUID 62529e0d-f33f-7807-1994-8c29e41dda799f6b
IODev mqtt2
LASTInputDev mqtt2
MSGCNT 1057
NAME shelly2.04
NR 125
STATE <a href="http://192.168.17.224" target="_blank">
true
</a>
100/stop
TYPE MQTT2_DEVICE
mqtt2_CONN mqtt2_192.168.17.224_6517
mqtt2_MSGCNT 1057
mqtt2_TIME 2022-04-11 20:01:44
READINGS:
2022-04-11 19:19:30 ASC_Enable on
2022-04-11 20:01:45 ASC_ShuttersLastDrive manual
2022-04-11 19:48:34 ASC_Time_DriveDown 12.04.2022 - 19:48
2022-04-11 19:48:34 ASC_Time_DriveUp 12.04.2022 - 06:47
2022-04-11 19:24:33 IODev mqtt2
2022-04-11 19:24:44 actions_stats_skipped 0
2022-04-11 19:24:43 associatedWith asc,none
2022-04-10 11:07:44 attrTemplateVersion 20210126
2022-04-11 19:24:44 cfg_changed_cnt 0
2022-04-11 19:24:44 cloud_connected false
2022-04-11 19:24:44 cloud_enabled false
2022-04-11 20:01:44 current stop
2022-04-11 20:01:44 energy 544
2022-04-11 19:24:44 fs_free 146082
2022-04-11 19:24:44 fs_size 233681
2022-04-11 19:24:44 fw_ver 20220209-093016/v1.11.8-g8c7bb8d
2022-04-11 19:24:44 has_update false
2022-04-11 19:24:44 id shellyswitch25-485519032A2C
2022-04-11 20:01:44 input0 0
2022-04-11 20:01:44 input1 0
2022-04-11 19:24:44 inputs_1_event
2022-04-11 19:24:44 inputs_1_event_cnt 0
2022-04-11 19:24:44 inputs_1_input 0
2022-04-11 19:24:44 inputs_2_event
2022-04-11 19:24:44 inputs_2_event_cnt 0
2022-04-11 19:24:44 inputs_2_input 0
2022-04-11 19:24:44 ip 192.168.17.224
2022-04-11 19:24:44 mac 485519032A2C
2022-04-11 19:24:44 meters_1_counters_1 0.000
2022-04-11 19:24:44 meters_1_counters_2 0.000
2022-04-11 19:24:44 meters_1_counters_3 0.000
2022-04-11 19:24:44 meters_1_is_valid true
2022-04-11 19:24:44 meters_1_overpower 0.00
2022-04-11 19:24:44 meters_1_power 0.00
2022-04-11 19:24:44 meters_1_timestamp 1649705084
2022-04-11 19:24:44 meters_1_total 188
2022-04-11 19:24:44 meters_2_counters_1 0.000
2022-04-11 19:24:44 meters_2_counters_2 0.000
2022-04-11 19:24:44 meters_2_counters_3 0.000
2022-04-11 19:24:44 meters_2_is_valid true
2022-04-11 19:24:44 meters_2_overpower 0.00
2022-04-11 19:24:44 meters_2_power 0.00
2022-04-11 19:24:44 meters_2_timestamp 1649705084
2022-04-11 19:24:44 meters_2_total 356
2022-04-11 19:24:44 mode roller
2022-04-11 19:24:44 model SHSW-25
2022-04-11 19:24:44 mqtt_connected true
2022-04-11 19:24:44 new_fw false
2022-04-11 19:24:44 online true
2022-04-11 20:01:44 overtemperature 0
2022-04-11 20:01:44 pct 100
2022-04-11 20:01:44 power 0.00
2022-04-11 19:24:44 ram_free 36256
2022-04-11 19:24:44 ram_total 49920
2022-04-11 20:01:44 roller_0_energy 544
2022-04-11 20:01:44 roller_0_power 0.00
2022-04-11 20:01:44 roller_0_stop_reason normal
2022-04-11 19:24:44 rollers_1_calibrating false
2022-04-11 19:24:44 rollers_1_current_pos 100
2022-04-11 19:24:44 rollers_1_is_valid true
2022-04-11 19:24:44 rollers_1_last_direction open
2022-04-11 19:24:44 rollers_1_overtemperature false
2022-04-11 19:24:44 rollers_1_positioning true
2022-04-11 19:24:44 rollers_1_power 0.00
2022-04-11 19:24:44 rollers_1_safety_switch false
2022-04-11 19:24:44 rollers_1_source mqtt
2022-04-11 19:24:44 rollers_1_state stop
2022-04-11 19:24:44 rollers_1_stop_reason normal
2022-04-11 19:24:44 serial 13
2022-04-11 20:01:44 state 100
2022-04-11 20:01:44 temperature 55.11
2022-04-11 20:01:44 temperature_f 131.19
2022-04-11 20:01:44 temperature_status Normal
2022-04-11 19:24:44 time 19:24
2022-04-11 19:24:44 tmp_is_valid true
2022-04-11 19:24:44 tmp_tC 55.42
2022-04-11 19:24:44 tmp_tF 131.76
2022-04-11 19:24:44 unixtime 1649697884
2022-04-11 19:24:44 update_has_update false
2022-04-11 19:24:44 update_new_version 20220209-093016/v1.11.8-g8c7bb8d
2022-04-11 19:24:44 update_old_version 20220209-093016/v1.11.8-g8c7bb8d
2022-04-11 19:24:44 update_status idle
2022-04-11 19:24:44 uptime 116306
2022-04-11 20:01:44 voltage 229.44
2022-04-11 19:24:44 wifi_sta_connected true
2022-04-11 19:24:44 wifi_sta_ip 192.168.17.224
2022-04-11 19:24:44 wifi_sta_rssi -76
2022-04-11 19:24:44 wifi_sta_ssid KLEIN
2022-04-10 11:07:44 x_mqttcom set announce
Attributes:
ASC 2
ASC_Mode_Down always
ASC_Mode_Up off
ASC_Pos_Reading pct
alexaName Rolladen Schlafzimmer
alexaRoom Schlafzimmer
alias Rolladen Schlafzimmer
cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
comment Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
devStateIcon .*/open:fts_shutter_up@red .*/close:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0/stop:fts_shutter_100 100/stop:fts_shutter_10 9\d/stop:fts_shutter_10 8\d/stop:fts_shutter_20 7\d/stop:fts_shutter_30 6\d/stop:fts_shutter_40 5\d/stop:fts_shutter_50 4\d/stop:fts_shutter_60 3\d/stop:fts_shutter_70 2\d/stop:fts_shutter_80 1\d/stop:fts_shutter_90 0\d/stop:fts_shutter_100 set_.*:fts_shutter_updown
eventMap open:opens close:closes
genericDeviceType blind
model shelly25_roller_invert_0
readingList shellies/shellyswitch25-485519032A2C/roller/0/pos:.* pct
shellies/shellyswitch25-485519032A2C/status/0/rollers:.* power
shellies/shellyswitch25-485519032A2C/online:.* online
shellies/shellyswitch25-485519032A2C/announce:.* { json2nameValue($EVENT) }
shellies/announce:.* { $EVENT =~ m,..id...shellyswitch25-485519032A2C...mac.*, ? json2nameValue($EVENT) : return }
shellies/shellyswitch25-485519032A2C/roller/0:.* current
shellies/shellyswitch25-485519032A2C/roller/0:open {{'state' => 'opening'}}
shellies/shellyswitch25-485519032A2C/roller/0:close {{'state' => 'closing'}}
shellies/shellyswitch25-485519032A2C/roller/0/pos:.* state
shellies/shellyswitch25-485519032A2C/input/1:.* input1
shellies/shellyswitch25-485519032A2C/input/0:.* input0
shellies/shellyswitch25-485519032A2C/relay/power:.* power
shellies/shellyswitch25-485519032A2C/relay/energy:.* energy
shellies/shellyswitch25-485519032A2C/temperature:.* temperature
shellies/shellyswitch25-485519032A2C/overtemperature:.* overtemperature
shellies/shellyswitch25-485519032A2C/roller/0/power:.* roller_0_power
shellies/shellyswitch25-485519032A2C/roller/0/energy:.* roller_0_energy
shellies/shellyswitch25-485519032A2C/temperature_f:.* temperature_f
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/info:.* { json2nameValue($EVENT) }
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/roller/0/stop_reason:.* roller_0_stop_reason
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/temperature_status:.* temperature_status
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/voltage:.* voltage
room _ExternalDevices->Shelly2,_Rolladen,_ExternalDevices->Alexa-Devices
setList open:noArg shellies/shellyswitch25-485519032A2C/roller/0/command open
close:noArg shellies/shellyswitch25-485519032A2C/roller/0/command close
half:noArg shellies/shellyswitch25-485519032A2C/roller/0/command/pos 50
stop:noArg shellies/shellyswitch25-485519032A2C/roller/0/command stop
pct:slider,0,1,100 shellies/shellyswitch25-485519032A2C/roller/0/command/pos $EVTPART1
x_recalibration:noArg shellies/shellyswitch25-485519032A2C/roller/0/command rc
x_update:noArg shellies/shellyswitch25-485519032A2C/command update_fw
x_mqttcom shellies/shellyswitch25-485519032A2C/command $EVTPART1
setStateList open close half stop pct
stateFormat <a href="http://ip" target="_blank">
online
</a>
state/current
userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforeDayOpen ASC_BlockingTime_beforeNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_CommandTemplate ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning,EG_window ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
webCmd :open:close:half:stop:pct
set asc createNewNotifyDev = hatte leider auch keinen Erfolg gebracht
Ausgabe von { join("\n", map { "$_->{TRIGGERTIME}, $_->{FN}"} @intAtA) }
1649700146.21475, FW_closeInactiveClients
1649700152.3838, PRESENCE_StartLocalScan
1649700154.00514, HUEBridge_GetUpdate
1649700156.09834, MQTT2_SERVER_keepaliveChecker
1649700163.9424, echodevice_GetSettings
1649700163.94718, echodevice_GetSettings
1649700163.95921, echodevice_GetSettings
1649700163.96482, echodevice_GetSettings
1649700164.38213, DbLog_execmemcache
1649700166.07934, echodevice_GetSettings
1649700173.40917, echodevice_LoginStart
1649700184.01483, harmony_ping
1649700190.76776, SONOS_IsSubprocessAliveChecker
1649700305.50096, ESPEasy_statusRequest
1649700352.52623, HttpUtils_TimeoutErr
1649700381.92651, FHEM::Astro::Update
1649708700, at_Exec
1649710800, at_Exec
1649714401, FileLog_dailySwitch
1649715900, at_Exec
1649716200, at_Exec
1649716200, at_Exec
1649721600, at_Exec
1649728800, DOIF_TimerTrigger
1649732400, at_Exec
1649736000, at_Exec
1649736000, DOIF_TimerTrigger
1649738865, CODE(0x6965ca0)
1649738865, CODE(0x6965ca0)
1649738865, CODE(0x6965ca0)
1649738865, CODE(0x6965ca0)
1649739600, at_Exec
1649739660, DOIF_TimerTrigger
1649757600, DOIF_TimerTrigger
1649757600, DOIF_TimerTrigger
1649759400, DOIF_TimerTrigger
1649759400, DOIF_TimerTrigger
1649783100, at_Exec
1649785714, CODE(0x695a070)
1649785714, CODE(0x695a070)
1649785714, CODE(0x695a070)
1649785714, CODE(0x695a070)
1649786534.37957, BlockingKill
Hat mir jemand bitte noch eine Idee?
Danke & Grüße
Marc
Am besten morgen Abend kurz vor dem schließen im ASC Device verbose auf 4 und debug auf 1 stellen und den Teil des Logos hier posten
Danke für deine Unterstützung :)
was mich wundert - im Rolladen Device wird immer das Reading ASC_ShuttersLastDrive alle x Minuten aktualisiert auf manual ?
Anbei das Logauszug von gestern Abend
Log für den Herren unter diesem Post deutlich gekürtz - in der Vorschau hat es gepasst, für den eigentlichen Post waren es zu viele Zeichen...
ASC_DEBUG!!! 2022.04.12 19:29:32 - FnIsDay: shelly2.04 Allgemein: 1
ASC_DEBUG!!! 2022.04.12 19:29:32 - FnIsDay: shelly2.04 getDownBrightness: 1 Brightness: -1 BrightnessMin: 500 Sunset: 0
ASC_DEBUG!!! 2022.04.12 19:29:32 - FnIsDay: shelly2.04 getUpBrightness: 1 Brightness: -1 BrightnessMax: 800 Sunrise: 1
ASC_DEBUG!!! 2022.04.12 19:29:32 - EventProcessingShutters: eine manualle Fahrt wurde erkannt!
ASC_DEBUG!!! 2022.04.12 19:29:32 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_stop_reason: normal'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_power: 0.00'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'power: 0.00'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_energy: 1105'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'energy: 1105'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'input1: 0'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'input0: 0'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature: 55.85'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature_f: 132.54'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'overtemperature: 0'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature_status: Normal'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'voltage: 231.29'
]
2022.04.12 19:29:32 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'ASC_ShuttersLastDrive: manual'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'current: stop'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - Notify: ASC_Pos_Reading Event vom Rollo shelly2.03 wurde erkannt - RECEIVED EVENT: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: Fn wurde durch Notify aufgerufen da ASC_Pos_Reading Event erkannt wurde - RECEIVED EVENT: 'pct: 100 state: 100'
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'shelly2.03_PosValue: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: shelly2.03 - Event vom Rollo erkannt. Es wird nun eine etwaige manuelle Fahrt ausgewertet. Int von ::gettimeofday: 1649784573 Last Position Timestamp: 1649729198 Drive Up Max Duration: 60 Last Position: 0 aktuelle Position: 100
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'state: manual'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: eine automatisierte Fahrt durch ASC wurde erkannt! Es werden nun die LastDriveReading und StateReading Werte gesetzt!
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'roller_0_stop_reason: normal'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'roller_0_power: 0.00'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'power: 0.00'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'roller_0_energy: 8023'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'energy: 8023'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'input1: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'input0: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'temperature: 54.07'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'temperature_f: 129.32'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'overtemperature: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'temperature_status: Normal'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'voltage: 231.44'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'current: stop'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'state: 100',
'pct: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - Notify: ASC_Pos_Reading Event vom Rollo shelly2.01 wurde erkannt - RECEIVED EVENT: [
'state: 100',
'pct: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: Fn wurde durch Notify aufgerufen da ASC_Pos_Reading Event erkannt wurde - RECEIVED EVENT: 'state: 100 pct: 100'
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'shelly2.01_PosValue: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: shelly2.01 - Event vom Rollo erkannt. Es wird nun eine etwaige manuelle Fahrt ausgewertet. Int von ::gettimeofday: 1649784573 Last Position Timestamp: 1649729198 Drive Up Max Duration: 60 Last Position: 0 aktuelle Position: 100
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'state: manual'
]
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: eine automatisierte Fahrt durch ASC wurde erkannt! Es werden nun die LastDriveReading und StateReading Werte gesetzt!
ASC_DEBUG!!! 2022.04.12 19:29:33 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'roller_0_stop_reason: normal'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'roller_0_power: 0.00'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'power: 0.00'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'roller_0_energy: 9039'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'energy: 9039'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'input1: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'input0: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'temperature: 58.67'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'temperature_f: 137.61'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'overtemperature: 0'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'temperature_status: Normal'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'voltage: 232.58'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'ASC_ShuttersLastDrive: manual'
]
2022.04.12 19:29:33 4: AutoShuttersControl (asc) - Devname: shelly2.01 Name: asc Notify: [
'ASC_ShuttersLastDrive: manual'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'current: stop'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'state: 100',
'pct: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:35 - Notify: ASC_Pos_Reading Event vom Rollo shelly2.02 wurde erkannt - RECEIVED EVENT: [
'state: 100',
'pct: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:35 - EventProcessingShutters: Fn wurde durch Notify aufgerufen da ASC_Pos_Reading Event erkannt wurde - RECEIVED EVENT: 'state: 100 pct: 100'
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'shelly2.02_PosValue: 100'
]
ASC_DEBUG!!! 2022.04.12 19:29:35 - EventProcessingShutters: shelly2.02 - Event vom Rollo erkannt. Es wird nun eine etwaige manuelle Fahrt ausgewertet. Int von ::gettimeofday: 1649784575 Last Position Timestamp: 1649729198 Drive Up Max Duration: 60 Last Position: 0 aktuelle Position: 100
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'state: manual'
]
ASC_DEBUG!!! 2022.04.12 19:29:35 - FnIsDay: shelly2.02 Allgemein: 1
ASC_DEBUG!!! 2022.04.12 19:29:35 - FnIsDay: shelly2.02 getDownBrightness: 1 Brightness: -1 BrightnessMin: 500 Sunset: 0
ASC_DEBUG!!! 2022.04.12 19:29:35 - FnIsDay: shelly2.02 getUpBrightness: 1 Brightness: -1 BrightnessMax: 800 Sunrise: 1
ASC_DEBUG!!! 2022.04.12 19:29:35 - EventProcessingShutters: eine manualle Fahrt wurde erkannt!
ASC_DEBUG!!! 2022.04.12 19:29:35 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'roller_0_stop_reason: normal'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'roller_0_power: 0.00'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'power: 0.00'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'roller_0_energy: 6479'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'energy: 6479'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'input1: 0'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'input0: 0'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'temperature: 57.74'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'temperature_f: 135.94'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'overtemperature: 0'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'temperature_status: Normal'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'voltage: 231.27'
]
2022.04.12 19:29:35 4: AutoShuttersControl (asc) - Devname: shelly2.02 Name: asc Notify: [
'ASC_ShuttersLastDrive: manual'
]
2022.04.12 19:29:43 4: AutoShuttersControl (asc) - Devname: astro Name: asc Notify: [
'MoonAlt: 41.7',
'SunDistance: 149993416',
'MoonAz: 117.5',
'ObsTime: 19:29:43',
'MoonDistanceObserver: 389198',
'SunDistanceObserver: 149992812',
'MoonAge: 128.9',
'MoonLon: 151.7',
'ObsLMST: 07:30:51',
'SunAz: 277.2',
'MoonDistance: 393411',
'ObsGMST: 06:53:18',
'SunAlt: 5.9'
]
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: shelly2.02 - Event vom Astro oder Twilight Device wurde erkannt. Event wird verarbeitet
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: asc - Passendes Event wurde erkannt. Verarbeitung über alle Rollos beginnt
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: shelly2.01 RainProtection: unprotected WindProtection: unprotected
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: shelly2.02 RainProtection: unprotected WindProtection: unprotected
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: shelly2.03 RainProtection: unprotected WindProtection: unprotected
ASC_DEBUG!!! 2022.04.12 19:29:43 - EventProcessingTwilightDevice: shelly2.04 RainProtection: unprotected WindProtection: unprotected
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'current: stop'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:02 - Notify: ASC_Pos_Reading Event vom Rollo shelly2.04 wurde erkannt - RECEIVED EVENT: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:02 - EventProcessingShutters: Fn wurde durch Notify aufgerufen da ASC_Pos_Reading Event erkannt wurde - RECEIVED EVENT: 'pct: 100 state: 100'
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'shelly2.04_PosValue: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:02 - EventProcessingShutters: shelly2.04 - Event vom Rollo erkannt. Es wird nun eine etwaige manuelle Fahrt ausgewertet. Int von ::gettimeofday: 1649784602 Last Position Timestamp: 1649729198 Drive Up Max Duration: 60 Last Position: 0 aktuelle Position: 100
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'state: manual'
]
ASC_DEBUG!!! 2022.04.12 19:30:02 - EventProcessingShutters: eine automatisierte Fahrt durch ASC wurde erkannt! Es werden nun die LastDriveReading und StateReading Werte gesetzt!
ASC_DEBUG!!! 2022.04.12 19:30:02 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_stop_reason: normal'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_power: 0.00'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'power: 0.00'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'roller_0_energy: 1105'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'energy: 1105'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'input1: 0'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'input0: 0'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature: 55.85'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature_f: 132.54'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'overtemperature: 0'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'temperature_status: Normal'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'voltage: 231.29'
]
2022.04.12 19:30:02 4: AutoShuttersControl (asc) - Devname: shelly2.04 Name: asc Notify: [
'ASC_ShuttersLastDrive: manual'
]
2022.04.12 19:30:03 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'current: stop'
]
2022.04.12 19:30:03 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:03 - Notify: ASC_Pos_Reading Event vom Rollo shelly2.03 wurde erkannt - RECEIVED EVENT: [
'pct: 100',
'state: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:03 - EventProcessingShutters: Fn wurde durch Notify aufgerufen da ASC_Pos_Reading Event erkannt wurde - RECEIVED EVENT: 'pct: 100 state: 100'
2022.04.12 19:30:03 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'shelly2.03_PosValue: 100'
]
ASC_DEBUG!!! 2022.04.12 19:30:03 - EventProcessingShutters: shelly2.03 - Event vom Rollo erkannt. Es wird nun eine etwaige manuelle Fahrt ausgewertet. Int von ::gettimeofday: 1649784603 Last Position Timestamp: 1649729198 Drive Up Max Duration: 60 Last Position: 0 aktuelle Position: 100
2022.04.12 19:30:03 4: AutoShuttersControl (asc) - Devname: asc Name: asc Notify: [
'state: manual'
]
ASC_DEBUG!!! 2022.04.12 19:30:03 - EventProcessingShutters: eine automatisierte Fahrt durch ASC wurde erkannt! Es werden nun die LastDriveReading und StateReading Werte gesetzt!
ASC_DEBUG!!! 2022.04.12 19:30:03 - EventProcessingShutters: Fn wurde durlaufen und es sollten Debugausgaben gekommen sein. !!!Wenn nicht!!! wurde der Event nicht korrekt als Nummerisch erkannt.
2022.04.12 19:30:03 4: AutoShuttersControl (asc) - Devname: shelly2.03 Name: asc Notify: [<
Bitte stelle in den Rollos das Attribut event-on-change-update auf .*
Dann sollte es gehen.
Danke für die schnelle Antwort, ich werde heute Abend berichten :-)
Bitte Logs mit der Code Funktion einfügen!
Das ist ja grauenhaft zum Lesen
Hallo,
ich habe seit vergangenen Montag das gleiche Problem. Die Rolladen fahren nicht mehr automatisch, Last Drive bleibt immer auf "manual" stehen. Ich wollte nun auch mal das Attribut event-on-change-update auf .* setzen, nur leider gibt es dieses Attribut bei mir nicht. Meinst du eventuell event-on-update-reading
Hallo, Ja Sorry in der Tat meinte ich event-on-update-reading. Vielen Dank
Leider hat es bei mir nicht zum Erfolg geführt, wie gesagt ich habe 2 Installationen (bei mir und meinen Eltern) und beide haben das gleiche Problem. Die zweite ist ganz neu aufgebaut mit dem ASC - daher dachte ich es liegt daran, irgendwas vergessen. Aber bei mir zuhause funktioniert aber die Beschattung nicht mehr und auch nicht das Rolladen auf, wenn ich das Fenster öffne. Vor dem Winter hatte das alles geklappt, bin etwas ratlos. Kann ich noch was debuggen um dem Fehler auf die Schliche zu kommen?
event-on-update-reading .* dachte ich mir :-) Hat leider nicht geholfen im Rolladen Device.
Nachtrag: es wird auch alle paar Minuten der Wert von dem Reading ASC_ShuttersLastDrive auf manual gesetzt. Kann es was damit zu tun haben?
Man sieht im Log immer alle Minute:
2022-04-14 17:24:52 AutoShuttersControl asc shelly2.03_PosValue: 100
2022-04-14 17:24:52 AutoShuttersControl asc manual
Internals:
CID shellyswitch25_485519032A2C
DEF shellyswitch25_485519032A2C
FUUID 62529e0d-f33f-7807-1994-8c29e41dda799f6b
IODev mqtt2
LASTInputDev mqtt2
MSGCNT 22275
NAME shelly2.04
NR 125
STATE <a href="http://192.168.17.224" target="_blank">
true
</a>
100/stop
TYPE MQTT2_DEVICE
mqtt2_CONN mqtt2_192.168.17.224_6810
mqtt2_MSGCNT 22275
mqtt2_TIME 2022-04-14 17:20:22
READINGS:
2022-04-11 19:19:30 ASC_Enable on
2022-04-14 17:20:22 ASC_ShuttersLastDrive manual
2022-04-14 06:41:59 ASC_Time_DriveDown 14.04.2022 - 19:52
2022-04-14 06:41:59 ASC_Time_DriveUp 15.04.2022 - 06:41
2022-04-14 04:04:59 IODev mqtt2
2022-04-14 04:05:51 actions_stats_skipped 0
2022-04-14 04:05:20 associatedWith asc,none
2022-04-10 11:07:44 attrTemplateVersion 20210126
2022-04-14 04:05:51 cfg_changed_cnt 0
2022-04-14 04:05:51 cloud_connected false
2022-04-14 04:05:51 cloud_enabled false
2022-04-14 17:20:22 current stop
2022-04-14 17:20:22 energy 1851
2022-04-14 04:05:51 fs_free 146082
2022-04-14 04:05:51 fs_size 233681
2022-04-14 04:05:51 fw_ver 20220209-093016/v1.11.8-g8c7bb8d
2022-04-14 04:05:51 has_update false
2022-04-14 04:05:51 id shellyswitch25-485519032A2C
2022-04-14 17:20:22 input0 0
2022-04-14 17:20:22 input1 0
2022-04-14 04:05:51 inputs_1_event
2022-04-14 04:05:51 inputs_1_event_cnt 0
2022-04-14 04:05:51 inputs_1_input 0
2022-04-14 04:05:51 inputs_2_event
2022-04-14 04:05:51 inputs_2_event_cnt 0
2022-04-14 04:05:51 inputs_2_input 0
2022-04-14 04:05:51 ip 192.168.17.224
2022-04-14 04:05:51 mac 485519032A2C
2022-04-14 04:05:51 meters_1_counters_1 0.000
2022-04-14 04:05:51 meters_1_counters_2 0.000
2022-04-14 04:05:51 meters_1_counters_3 0.000
2022-04-14 04:05:51 meters_1_is_valid true
2022-04-14 04:05:51 meters_1_overpower 0.00
2022-04-14 04:05:51 meters_1_power 0.00
2022-04-14 04:05:51 meters_1_timestamp 1649909151
2022-04-14 04:05:51 meters_1_total 938
2022-04-14 04:05:51 meters_2_counters_1 0.000
2022-04-14 04:05:51 meters_2_counters_2 0.000
2022-04-14 04:05:51 meters_2_counters_3 0.000
2022-04-14 04:05:51 meters_2_is_valid true
2022-04-14 04:05:51 meters_2_overpower 0.00
2022-04-14 04:05:51 meters_2_power 0.00
2022-04-14 04:05:51 meters_2_timestamp 1649909151
2022-04-14 04:05:51 meters_2_total 729
2022-04-14 04:05:51 mode roller
2022-04-14 04:05:51 model SHSW-25
2022-04-14 04:05:51 mqtt_connected true
2022-04-14 04:05:51 new_fw false
2022-04-14 04:05:51 online true
2022-04-14 17:20:22 overtemperature 0
2022-04-14 17:20:22 pct 100
2022-04-14 17:20:22 power 0.00
2022-04-14 04:05:51 ram_free 36260
2022-04-14 04:05:51 ram_total 49920
2022-04-14 17:20:22 roller_0_energy 1851
2022-04-14 17:20:22 roller_0_power 0.00
2022-04-14 17:20:22 roller_0_stop_reason normal
2022-04-14 04:05:51 rollers_1_calibrating false
2022-04-14 04:05:51 rollers_1_current_pos 0
2022-04-14 04:05:51 rollers_1_is_valid true
2022-04-14 04:05:51 rollers_1_last_direction close
2022-04-14 04:05:51 rollers_1_overtemperature false
2022-04-14 04:05:51 rollers_1_positioning true
2022-04-14 04:05:51 rollers_1_power 0.00
2022-04-14 04:05:51 rollers_1_safety_switch false
2022-04-14 04:05:51 rollers_1_source mqtt
2022-04-14 04:05:51 rollers_1_state stop
2022-04-14 04:05:51 rollers_1_stop_reason normal
2022-04-14 04:05:51 serial 35
2022-04-14 17:20:22 state 100
2022-04-14 17:20:22 temperature 58.09
2022-04-14 17:20:22 temperature_f 136.56
2022-04-14 17:20:22 temperature_status Normal
2022-04-14 04:05:51 time 04:05
2022-04-14 04:05:51 tmp_is_valid true
2022-04-14 04:05:51 tmp_tC 56.62
2022-04-14 04:05:51 tmp_tF 133.91
2022-04-14 04:05:51 unixtime 1649901951
2022-04-14 04:05:51 update_has_update false
2022-04-14 04:05:51 update_new_version 20220209-093016/v1.11.8-g8c7bb8d
2022-04-14 04:05:51 update_old_version 20220209-093016/v1.11.8-g8c7bb8d
2022-04-14 04:05:51 update_status idle
2022-04-14 04:05:51 uptime 320370
2022-04-14 17:20:22 voltage 231.32
2022-04-14 04:05:51 wifi_sta_connected true
2022-04-14 04:05:51 wifi_sta_ip 192.168.17.224
2022-04-14 04:05:51 wifi_sta_rssi -77
2022-04-14 04:05:51 wifi_sta_ssid KLEIN
2022-04-10 11:07:44 x_mqttcom set announce
Attributes:
ASC 2
ASC_Mode_Down always
ASC_Mode_Up off
ASC_Pos_Reading pct
alexaName Rolladen Schlafzimmer
alexaRoom Schlafzimmer
alias Rolladen Schlafzimmer
cmdIcon open:fts_shutter_up close:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
comment Shelly 2.5 in Roller-Mode. 100=opened / 0=closed
devStateIcon .*/open:fts_shutter_up@red .*/close:fts_shutter_down@red true:10px-kreis-gruen false:10px-kreis-rot 0/stop:fts_shutter_100 100/stop:fts_shutter_10 9\d/stop:fts_shutter_10 8\d/stop:fts_shutter_20 7\d/stop:fts_shutter_30 6\d/stop:fts_shutter_40 5\d/stop:fts_shutter_50 4\d/stop:fts_shutter_60 3\d/stop:fts_shutter_70 2\d/stop:fts_shutter_80 1\d/stop:fts_shutter_90 0\d/stop:fts_shutter_100 set_.*:fts_shutter_updown
event-on-update-reading .*
eventMap open:opens close:closes
genericDeviceType blind
model shelly25_roller_invert_0
readingList shellies/shellyswitch25-485519032A2C/roller/0/pos:.* pct
shellies/shellyswitch25-485519032A2C/status/0/rollers:.* power
shellies/shellyswitch25-485519032A2C/online:.* online
shellies/shellyswitch25-485519032A2C/announce:.* { json2nameValue($EVENT) }
shellies/announce:.* { $EVENT =~ m,..id...shellyswitch25-485519032A2C...mac.*, ? json2nameValue($EVENT) : return }
shellies/shellyswitch25-485519032A2C/roller/0:.* current
shellies/shellyswitch25-485519032A2C/roller/0:open {{'state' => 'opening'}}
shellies/shellyswitch25-485519032A2C/roller/0:close {{'state' => 'closing'}}
shellies/shellyswitch25-485519032A2C/roller/0/pos:.* state
shellies/shellyswitch25-485519032A2C/input/1:.* input1
shellies/shellyswitch25-485519032A2C/input/0:.* input0
shellies/shellyswitch25-485519032A2C/relay/power:.* power
shellies/shellyswitch25-485519032A2C/relay/energy:.* energy
shellies/shellyswitch25-485519032A2C/temperature:.* temperature
shellies/shellyswitch25-485519032A2C/overtemperature:.* overtemperature
shellies/shellyswitch25-485519032A2C/roller/0/power:.* roller_0_power
shellies/shellyswitch25-485519032A2C/roller/0/energy:.* roller_0_energy
shellies/shellyswitch25-485519032A2C/temperature_f:.* temperature_f
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/info:.* { json2nameValue($EVENT) }
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/roller/0/stop_reason:.* roller_0_stop_reason
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/temperature_status:.* temperature_status
shellyswitch25_485519032A2C:shellies/shellyswitch25-485519032A2C/voltage:.* voltage
room _ExternalDevices->Shelly2,_Rolladen,_ExternalDevices->Alexa-Devices
setList open:noArg shellies/shellyswitch25-485519032A2C/roller/0/command open
close:noArg shellies/shellyswitch25-485519032A2C/roller/0/command close
half:noArg shellies/shellyswitch25-485519032A2C/roller/0/command/pos 50
stop:noArg shellies/shellyswitch25-485519032A2C/roller/0/command stop
pct:slider,0,1,100 shellies/shellyswitch25-485519032A2C/roller/0/command/pos $EVTPART1
x_recalibration:noArg shellies/shellyswitch25-485519032A2C/roller/0/command rc
x_update:noArg shellies/shellyswitch25-485519032A2C/command update_fw
x_mqttcom shellies/shellyswitch25-485519032A2C/command $EVTPART1
setStateList open close half stop pct
stateFormat <a href="http://ip" target="_blank">
online
</a>
state/current
userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforeDayOpen ASC_BlockingTime_beforeNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_CommandTemplate ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning,EG_window ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
webCmd :open:close:half:stop:pct
Es sogar ganz genau etwas damit zu tun. Die Frage ist nur wieso das so ist. Dem zufolge sollte ja auch das Reading pct im selben Intervall aktuellisiert werden und dementsprechend ein Event werfen. Kannst Du über den Eventmanager Dir anschauen.
Korrekt das wird es auch:
2022-04-14 18:33:23 AutoShuttersControl asc shelly2.03_PosValue: 100
2022-04-14 18:33:23 AutoShuttersControl asc manual
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 pct: 100
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 100
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 roller_0_stop_reason: normal
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 roller_0_power: 0.00
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 power: 0.00
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 roller_0_energy: 8693
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 energy: 8693
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 input1: 0
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 input0: 0
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 temperature: 55.75
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 temperature_f: 132.34
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 overtemperature: 0
2022-04-14 18:33:23 MQTT2_DEVICE shelly2.03 temperature_status: Normal
2022-04-14 18:33:24 MQTT2_DEVICE shelly2.03 voltage: 230.30
2022-04-14 18:33:24 MQTT2_DEVICE shelly2.02 ASC_ShuttersLastDrive: manual
Das muss unterbunden werden. Sollte eigentlich das event-on-update-reading erledigen.
Alternativ stell das Attribut ASC_blockingTime_AfterManual auf 0 zum testen
Ich hab mal event-on-change-reading . * gesetzt und entsprechend event-on-update-reading . * gelöscht - so wird zu mindestens mal das Reading ASC_ShuttersLastDrive nicht im Minutentakt aktualisiert. Ich beobachte es mal heute Abend ob die Rolläden automatisch runter fahren.
Ach verdammt. Ich komme jedesmal mit den beiden durcheinander. Ja on-change ist ja auch korrekt. Es soll nur beim ändern des Readings entsprechend ein Event geben.
Sorry
Jo nun geht es wieder, Danke für die Unterstützung 8)