Hallo CoolTux,
meine Frau hat heute Abend ein Problem mit dem Fahren in die Lüftungsposition festgestellt.
Ich habe bei mir die Tage jetzt endlich mal meine Fensterkontakte mit ASC verknüpft, das wollte ich eigentlich schon länger machen. Die Kontakte sind Homematic 3-State Selbstbaukontakte, Funktion gleich wie bei den Originalen.
Rollläden über das Rollo-Modul angebunden, läuft ja so schon seit Jahren.
Nun ist folgendes passiert: Die Rollläden waren über roommate asleep zugefahren, soweit alles wie immer. Nun hat meine Frau den Fenstergriff auf kippen gestellt, da fuhren die Rollläden ein wenig hoch und dann gleich wieder runter.
Jetzt war ich eben nochmal oben und habe das Ganze nochmals getestet, dabei ist mir aufgefallen das wenn ich den Fenstergriff anfange zu drehen und bei offen anhalte fährt der Rollladen in die Lüftungsstellung. Hat er angehalten und ich drehe den Griff weiter in RIchtung lüften passiert nichts und der Rollladen bleibt auf der Lüftungsposition.
Gehe ich aber hin und drehe den Griff (was ja eigentlich der normale Weg ist) von zu über offen nach kippen fängt er an hochzufahren und wie ich beim Endschalter für offen ankomme fährt er wieder runter.
Im Log habe ich dazu folgendes stehen:
2022.09.07 21:16:22.452 3: EG_wz_HW_MapleSduino: NN_xx_SW_Jarolift set up 6
2022.09.07 21:16:23.800 3: driving into wrong direction. stop and change driving direction
2022.09.07 21:16:23.807 3: EG_wz_HW_MapleSduino: NN_xx_SW_Jarolift set stop 6
2022.09.07 21:16:24.011 3: EG_wz_HW_MapleSduino: NN_xx_SW_Jarolift set down 6
Das Problem scheint hier daran zu liegen das beim fahren in die Lüftungsposition sich der Status vom Griff nochmals ändert und dann hier wohl irgendwas durcheinander kommt.
Hier mal ein List des Rollladens:
Internals:
FUUID 61754aaf-f33f-1612-d481-d7078101b5ecabeb
FVERSION 44_ROLLO.pm:v1.403.0-s18436/2019-01-27
NAME OG_sz_RO_Fenster
NR 65
STATE pct-30
TYPE ROLLO
eventCount 261
stoptime 1662578227
READINGS:
2021-10-24 14:11:58 ASC_Enable on
2022-09-07 21:37:46 ASC_ShadingMessage INFO: current shading status is 'out' - next check in 10m
2022-09-07 21:17:07 ASC_ShuttersLastDrive ventilate - window open
2022-09-07 19:54:12 ASC_Time_DriveDown roommate only
2022-09-07 19:54:12 ASC_Time_DriveUp roommate only
2022-09-07 18:22:34 associatedWith NN_xx_SW_Rollladenautomatik
2022-09-07 21:16:59 command pct-70
2022-09-07 21:16:59 desired_pct 70
2022-09-07 21:16:59 drive-type modul
2022-09-07 21:16:59 last_drive drive-up
2022-09-07 21:17:07 pct 30
2022-09-07 21:17:07 state pct-30
Attributes:
ASC 2
ASC_BrightnessSensor EG_wz_HW_Wetterstation
ASC_Down roommate
ASC_Mode_Down always
ASC_Mode_Up always
ASC_Pos_Reading pct
ASC_Roommate_Device di_Schlafen_Eltern
ASC_Shading_InOutAzimuth 15:185
ASC_Shading_MinMax_Elevation 20:100
ASC_Shading_Min_OutsideTemperature 15
ASC_Shading_Mode always
ASC_Shading_Pos 10
ASC_Up roommate
ASC_WindowRec OG_sz_TK_Fenster
ASC_WindowRec_subType threestate
alias Fenster
cmdIcon open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
devStateIcon open:fts_shutter_10:closed closed:fts_shutter_100:open half:fts_shutter_50:closed drive-up:fts_shutter_up@red:stop drive-down:fts_shutter_down@red:stop pct-100:fts_shutter_10:open pct-90:fts_shutter_10:closed pct-80:fts_shutter_20:closed pct-70:fts_shutter_30:closed pct-60:fts_shutter_40:closed pct-50:fts_shutter_50:closed pct-40:fts_shutter_60:open pct-30:fts_shutter_70:open pct-20:fts_shutter_80:open pct-10:fts_shutter_90:open pct-0:fts_shutter_100:closed
group Rollladen
icon fts_shutter
rl_autoStop 1
rl_commandDown set NN_xx_SW_Jarolift down 6
rl_commandStop set NN_xx_SW_Jarolift stop 6
rl_commandUp set NN_xx_SW_Jarolift up 6
rl_excessBottom 2
rl_excessTop 0
rl_resetTime 0
rl_secondsDown 16
rl_secondsUp 17
rl_switchTime 1
rl_type HomeKit
room Obergeschoß->Schlafzimmer
userattr ASC_Adv:on,off ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforeDayOpen ASC_BlockingTime_beforeNightClose ASC_BrightnessSensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_CommandTemplate ASC_Down:time,astro,brightness,roommate ASC_DriveUpMaxDuration ASC_Drive_Delay ASC_Drive_DelayStart ASC_ExternalTrigger ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownValue_beforeNightClose ASC_PrivacyDown_Pos ASC_PrivacyUpValue_beforeDayOpen ASC_PrivacyUp_Pos ASC_RainProtection:on,off ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_AbsentDelay ASC_Self_Defense_Mode:absent,gone,off ASC_Shading_BetweenTheTime ASC_Shading_InOutAzimuth ASC_Shading_MinMax_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_SunnyCloudy ASC_Shading_WaitingPeriod ASC_Shutter_IdleDetection ASC_ShuttersPlace:window,terrace,awning,EG_window ASC_SlatPosCmd_SlatDevice ASC_Sleep_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_TempSensor ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness,roommate ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindParameters ASC_WindProtection:on,off ASC_WindowRec ASC_WindowRec_PosAfterDayClosed:open,lastManual ASC_WindowRec_subType:twostate,threestate
webCmd open:closed:half:stop:pct
und hier ein List vom ASC-Device:
Internals:
FUUID 61732b49-f33f-1612-b702-c420e176787b5ba8
FVERSION 73_AutoShuttersControl.pm:v0.10.24-s26357/2022-08-29
MID da39a3ee5e6b4b0d3255bfef95601890afd80709
NAME NN_xx_SW_Rollladenautomatik
NOTIFYDEV global,NN_xx_SW_Rollladenautomatik,DG_az_RO_Fenster,EG_ku_RO_Fenster,EG_wz_RO_Fenster,EG_wz_RO_Tuer,OG_bz_RO_Fenster,OG_kc_RO_Fenster,OG_kc_RO_Tuer,OG_ke_RO_Fenster,OG_sz_RO_Fenster,OG_sz_RO_Tuer,OG_sz_TK_Fenster,NN_xx_SW_Astro,OG_ke_RO_Fenster,DG_az_TK_Fenster_group,OG_bz_TK_Fenster_group,OG_sz_RO_Tuer,EG_wz_RO_Tuer,di_Schlafen_Eltern,OG_sz_RO_Fenster,OG_ke_TK_Fenster,OG_bz_TK_Fenster_grp,DG_az_TK_Fenster_grp,EG_wz_TK_Tuer,OG_sz_TK_Tuer,di_Schlafen_Elias,OG_kc_RO_Fenster,OG_bz_RO_Fenster,DG_az_RO_Fenster,EG_ku_TK_Fenster,EG_wz_TK_Fenster_grp,NN_xx_SW_Bewohner,OG_kc_TK_Tuer,OG_kc_TK_Fenster,di_Schlafen_Constantin,EG_wz_TK_Fenster_group,EG_wz_HW_Wetterstation,OG_kc_RO_Tuer
NR 31
NTFY_ORDER 51-NN_xx_SW_Rollladenautomatik
STATE ventilate - window open
TYPE AutoShuttersControl
VERSION v0.10.24
eventCount 81
OLDREADINGS:
READINGS:
2022-07-27 09:12:38 DG_az_RO_Fenster_PosValue 100
2022-07-27 09:12:21 DG_az_RO_Fenster_lastPosValue 10
2022-09-07 20:32:05 DG_az_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:18
2021-10-29 14:31:05 EG_ku_RO_Fenster_PosValue 100
2022-09-07 20:32:05 EG_ku_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:18
2022-03-11 11:05:16 EG_wz_RO_Fenster_PosValue 100
2022-09-07 20:32:05 EG_wz_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:18
2022-09-07 13:46:13 EG_wz_RO_Tuer_PosValue 100
2022-09-07 13:45:53 EG_wz_RO_Tuer_lastPosValue 10
2022-09-07 20:32:05 EG_wz_RO_Tuer_nextAstroTimeEvent 08.09.2022 - 06:18
2022-09-07 16:20:41 OG_bz_RO_Fenster_PosValue 100
2022-09-07 16:20:27 OG_bz_RO_Fenster_lastPosValue 10
2022-09-07 20:32:05 OG_bz_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:18
2022-09-07 18:49:34 OG_kc_RO_Fenster_PosValue 0
2022-09-07 18:49:16 OG_kc_RO_Fenster_lastPosValue 100
2022-09-07 19:54:12 OG_kc_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:57
2022-09-07 18:49:42 OG_kc_RO_Tuer_PosValue 0
2022-09-07 18:49:16 OG_kc_RO_Tuer_lastPosValue 100
2022-09-07 19:54:12 OG_kc_RO_Tuer_nextAstroTimeEvent 08.09.2022 - 06:57
2022-09-07 18:49:24 OG_ke_RO_Fenster_PosValue 0
2022-09-07 18:49:06 OG_ke_RO_Fenster_lastPosValue 100
2022-09-07 19:54:12 OG_ke_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:57
2022-09-07 21:17:07 OG_sz_RO_Fenster_PosValue 30
2022-09-07 18:49:16 OG_sz_RO_Fenster_lastPosValue 100
2022-09-07 19:54:12 OG_sz_RO_Fenster_nextAstroTimeEvent 08.09.2022 - 06:57
2022-09-07 21:16:13 OG_sz_RO_Tuer_PosValue 30
2022-09-07 18:49:16 OG_sz_RO_Tuer_lastPosValue 100
2022-09-07 19:54:12 OG_sz_RO_Tuer_nextAstroTimeEvent 08.09.2022 - 06:57
2021-10-23 08:06:07 ascEnable on
2022-09-07 18:22:41 controlShading on
2021-10-23 08:06:07 hardLockOut off
2021-10-25 20:35:06 partyMode off
2022-09-07 18:22:34 room_Dachgeschoss-_Arbeitszimmer DG_az_RO_Fenster
2022-09-07 18:22:34 room_Erdgeschoss-_Kueche EG_ku_RO_Fenster
2022-09-07 18:22:34 room_Erdgeschoss-_Wohnzimmer EG_wz_RO_Fenster,EG_wz_RO_Tuer
2022-09-07 18:22:34 room_Obergeschoss-_Badezimmer OG_bz_RO_Fenster
2022-09-07 18:22:34 room_Obergeschoss-_Kinderzimmer_Constantin OG_kc_RO_Fenster,OG_kc_RO_Tuer
2022-09-07 18:22:34 room_Obergeschoss-_Kinderzimmer_Elias OG_ke_RO_Fenster
2022-09-07 18:22:34 room_Obergeschoss-_Schlafzimmer OG_sz_RO_Fenster,OG_sz_RO_Tuer
2021-10-23 08:06:07 selfDefense off
2022-09-07 21:17:07 state ventilate - window open
2021-10-23 08:06:07 sunriseTimeWeHoliday off
2022-09-07 18:22:34 userAttrList rolled out
helper:
shuttersList:
DG_az_RO_Fenster
EG_ku_RO_Fenster
EG_wz_RO_Fenster
EG_wz_RO_Tuer
OG_bz_RO_Fenster
OG_kc_RO_Fenster
OG_kc_RO_Tuer
OG_ke_RO_Fenster
OG_sz_RO_Fenster
OG_sz_RO_Tuer
monitoredDevs:
DG_az_RO_Fenster:
DG_az_TK_Fenster_group:
DG_az_RO_Fenster ASC_WindowRec
DG_az_TK_Fenster_grp:
DG_az_RO_Fenster ASC_WindowRec
EG_ku_TK_Fenster:
EG_ku_RO_Fenster ASC_WindowRec
EG_wz_HW_Wetterstation:
DG_az_RO_Fenster ASC_BrightnessSensor
EG_ku_RO_Fenster ASC_BrightnessSensor
EG_wz_RO_Fenster ASC_BrightnessSensor
EG_wz_RO_Tuer ASC_BrightnessSensor
OG_bz_RO_Fenster ASC_BrightnessSensor
OG_kc_RO_Fenster ASC_BrightnessSensor
OG_kc_RO_Tuer ASC_BrightnessSensor
OG_ke_RO_Fenster ASC_BrightnessSensor
OG_sz_RO_Fenster ASC_BrightnessSensor
OG_sz_RO_Tuer ASC_BrightnessSensor
EG_wz_RO_Tuer:
EG_wz_TK_Fenster_group:
EG_wz_RO_Fenster ASC_WindowRec
EG_wz_TK_Fenster_grp:
EG_wz_RO_Fenster ASC_WindowRec
EG_wz_TK_Tuer:
EG_wz_RO_Tuer ASC_WindowRec
NN_xx_SW_Astro:
NN_xx_SW_Rollladenautomatik ASC_twilightDevice
NN_xx_SW_Bewohner:
NN_xx_SW_Rollladenautomatik ASC_residentsDev
OG_bz_RO_Fenster:
OG_bz_TK_Fenster_group:
OG_bz_RO_Fenster ASC_WindowRec
OG_bz_TK_Fenster_grp:
OG_bz_RO_Fenster ASC_WindowRec
OG_kc_RO_Fenster:
OG_kc_RO_Tuer:
OG_kc_TK_Fenster:
OG_kc_RO_Fenster ASC_WindowRec
OG_kc_TK_Tuer:
OG_kc_RO_Tuer ASC_WindowRec
OG_ke_RO_Fenster:
OG_ke_TK_Fenster:
OG_ke_RO_Fenster ASC_WindowRec
OG_sz_RO_Fenster:
OG_sz_RO_Tuer:
OG_sz_TK_Fenster:
OG_sz_RO_Fenster ASC_WindowRec
OG_sz_TK_Tuer:
OG_sz_RO_Tuer ASC_WindowRec
di_Schlafen_Constantin:
OG_kc_RO_Fenster ASC_Roommate_Device
OG_kc_RO_Tuer ASC_Roommate_Device
di_Schlafen_Elias:
OG_ke_RO_Fenster ASC_Roommate_Device
di_Schlafen_Eltern:
OG_sz_RO_Fenster ASC_Roommate_Device
OG_sz_RO_Tuer ASC_Roommate_Device
Attributes:
ASC_autoAstroModeEvening CIVIL
ASC_autoAstroModeMorning CIVIL
ASC_autoShuttersControlEvening on
ASC_autoShuttersControlMorning on
ASC_expert 1
ASC_residentsDev NN_xx_SW_Bewohner
ASC_tempSensor EG_wz_HW_Wetterstation
ASC_twilightDevice NN_xx_SW_Astro
alias AutoShuttersControl
devStateIcon { ShuttersControl_DevStateIcon($name) }
group Rolladenautomatik
icon fts_shutter_automatic
room Allgemein->Rollladensteuerung
Eventuell hast du ja hier eine Idee woran das liegen könnte bzw. wie man das beheben kann.
Gruß
Markus
Hallo Markus,
Die original Fensterdrehgriffsensoren hatten dafür die Möglichkeit der Statusverzögerung. Eventuell hast Du sowas auch.
Ansonsten wird es kompliziert.
Grüße
Marko
Zitat von: CoolTux am 07 September 2022, 22:28:26
Hallo Markus,
Die original Fensterdrehgriffsensoren hatten dafür die Möglichkeit der Statusverzögerung. Eventuell hast Du sowas auch.
Ansonsten wird es kompliziert.
Grüße
Marko
Hallo Marko, den Parameter habe ich auch, wie gesagt sind gleich den Originalen. Werde ich morgen mal probieren und berichten. Was denkst du sollte ich hier einstellen, hätte jetzt mal spontan so um die 2-3 Sekunden im Kopf.
Gruß
Markus
2 Sekunden sollten ausreichend sein denke ich. Einfach mal probieren. ;D
Hallo Marko,
wollte nur eine kurze Rückmeldung geben, hab die Verzögerung auf 5 Sekunden gestellt, funktioniert einwandfrei. Dabei habe ich auch noch bemerkt das bei meinen 3 Strukturen (brauche ich da ich dreimal mehrere Fensterkontakte für einen Rollladen habe) da auch noch etwas gesponnen hat, ein "event-on-change-reading .* hat dann hier aber auch Abhilfe geschafft, läuft jetzt alles super, danke nochmal. :D
Gruß Markus