Ich hab gestern ein neues Tablet mit Hilfe von AMAD in Fhem eingebunden.
Das auslesen der Readings klappt, nur leider geht es andersrum nicht. Wenn ich versuche in Fhem einen Set-Befehl abzusetzen bekomme ich nur ein "Connection refused (111)".
Ich denke das Problem liegt bei der Autoremote-App, aber ich weiß nicht wie und wo ich ansetzen muss.
Hier jedenfalls das List von dem Tablet-Device:
Internals:
AMADBridge_MSGCNT 210
AMADBridge_TIME 2023-03-26 11:25:58
AMAD_ID 1679783927
CFGFN
DEF 192.168.178.52 1679783927 Autoremote
FUUID 641f785a-f33f-7706-7841-3f4b34b62d141527
FVERSION 74_AMADDevice.pm:v4.4.8-s21406/2020-03-11
HOST 192.168.178.52
IODev AMADBridge
LASTInputDev AMADBridge
MODEL Autoremote
MSGCNT 210
NAME BLACKVIEW_TAB_8E
NOTIFYDEV global,BLACKVIEW_TAB_8E,AMADBridge
NR 334744
NTFY_ORDER 50-BLACKVIEW_TAB_8E
PORT 1817
STATE 192.168.178.52: Connection refused (111)
TYPE AMADDevice
VERSION v4.4.8
VERSIONFLOWSET 4.4.3
eventCount 150
READINGS:
2023-03-25 23:40:26 IODev AMADBridge
2023-03-25 23:40:29 airplanemode off
2023-03-25 23:40:29 androidVersion 10.0 Q
2023-03-26 11:23:58 batteryPercent 98
2023-03-25 23:40:29 bluetooth off
2023-03-25 23:40:29 deviceModel Blackview Tab 8E
2023-03-26 09:50:01 deviceState online
2023-03-26 00:20:03 doNotDisturb always
2023-03-25 23:40:29 flow_SetCommands aktiv
2023-03-25 23:40:29 flow_informations aktiv
2023-03-25 23:40:29 flowsetVersionAtDevice 4.4.3 (Tasker)
2023-03-25 23:40:29 keyguardSet 1
2023-03-26 11:27:02 lastSetCommandState setCmd_error
2023-03-25 23:40:29 lastStatusRequestState statusRequest_done
2023-03-25 23:40:29 mute on
2023-03-25 23:40:29 nextAlarmDay %AlarmDay
2023-03-25 23:40:29 nextAlarmState NextAlarm
2023-03-25 23:40:29 nextAlarmTime %AlarmTime
2023-03-26 09:50:01 screen on unlocked
2023-03-26 10:58:32 screenBrightness 255
2023-03-25 23:40:29 screenBrightnessMode off
2023-03-26 00:06:28 screenOrientation landscape
2023-03-25 23:40:29 screenOrientationMode auto
2023-03-26 11:27:02 state 192.168.178.52: Connection refused (111)
2023-03-25 23:40:29 volume 0
2023-03-25 23:40:29 volumeNotification 7
helper:
deviceStateErrorCounter 0
infoErrorCounter 0
setCmdErrorCounter 9
Attributes:
IODev AMADBridge
group Geräte
remoteServer Autoremote
room AMAD
Ich hatte heute das Problem auch. Habe dann Control Mode auf "trigger" gestellt, dann ging es.