Mein nicht containerisiertes FHEM zeigt für "apptime max" in etwa folgende Ausgabe:
active-timers: 34; max-active timers: 41; max-timer-load: 2 min-tmrHandlingTm: 0.1ms; max-tmrHandlingTm: 79.7ms; totAvgDly: 1.0ms
name function max count total average maxDly avgDly TS Max call param Max call
tmr-ONKYO_AVR_connectionCheck HASH(0x55e49f3344a8) 79 9 441.51 49.06 1.89 0.55 10.05. 12:43:03 HASH(PioneerVSX)
tmr-CUL_HM_ActCheck ActionDetector 41 1 41.83 41.83 0.53 0.53 10.05. 12:40:59 ActionDetector
tmr-CUL_HM_cfgStateUpdate cfgStateUpdate 34 15 107.26 7.15 1.41 0.68 10.05. 12:38:02 cfgStateUpdate:thermostatWohnzimmerWand
hmLanGw03 HMUARTLGW_Read 19 504 694.65 1.38 0.00 0.00 10.05. 12:43:13 HASH(hmLanGw03)
hmLanGw01 HMUARTLGW_Read 17 712 626.44 0.88 0.00 0.00 10.05. 12:38:16 HASH(hmLanGw01)
tmr-CUL_HM_respPendTout respPend 16 11 99.37 9.03 1.70 0.68 10.05. 12:46:19 respPend:3CE215
tmr-Wunderground_GetStatus HASH(0x55e49f801f08) 14 2 26.18 13.09 1.10 1.05 10.05. 12:46:01 HASH(WuWeatherSomewhere)
autoLichtAbstellraum DOIF_Notify 13 1 13.71 13.71 0.00 0.00 10.05. 12:43:13 HASH(autoLichtAbstellraum); HASH(Abstellraum)
tmr-OctoPrint_GetStatus HASH(0x55e4a15c1668) 11 11 91.85 8.35 2.13 0.88 10.05. 12:39:12 HASH(PrusaMini)
LichtschalterAbstellraum_Sw_02 CUL_HM_Set 11 1 11.42 11.42 0.00 0.00 10.05. 12:43:13 HASH(LichtschalterAbstellraum_Sw_02); LichtschalterAbstellraum_Sw_02; off
tmr-Jabber_PollMessages HASH(0x55e49e45fdc8) 10 254 2624.43 10.33 2.81 1.10 10.05. 12:39:51 HASH(JabberInterface)
...
Die containerisierte Variante hingegen:
active-timers: 36; max-active timers: 39; max-timer-load: 3 min-tmrHandlingTm: 0.1ms; max-tmrHandlingTm: 417.3ms; totAvgDly: 52.3ms
name function max count total average maxDly avgDly TS Max call param Max call
hmLanGw03 HMUARTLGW_Read 934 25 2725.97 109.04 0.00 0.00 10.05. 12:50:04 HASH(hmLanGw03)
DBLogging DbLog_Log 930 33 4503.75 136.48 0.00 0.00 10.05. 12:50:04 HASH(DBLogging); HASH(RaumthermostatWohnzimmer_Climate)
tmr-CUL_HM_respPendTout respPend 417 3 417.83 139.28 275.22 92.04 10.05. 12:50:15 respPend:6B1FD2
zwd ZWDongle_Read 307 1 307.35 307.35 0.00 0.00 10.05. 12:50:29 HASH(zwd)
tmr-CUL_HM_motionCheck BewegungsmelderAussen 280 1 280.59 280.59 1.72 1.72 10.05. 12:50:17 BewegungsmelderAussen:motionCheck
hmLanGw01 HMUARTLGW_Read 267 291 1129.26 3.88 0.00 0.00 10.05. 12:50:12 HASH(hmLanGw01)
tmr-OctoPrint_GetStatus HASH(0x557b1aa2bae8) 143 1 143.74 143.74 0.59 0.59 10.05. 12:50:25 HASH(PrusaMini)
DBLogging DbLog_SBP_Read 21 16 230.23 14.39 0.00 0.00 10.05. 12:50:23 HASH(DBLogging)
tmr-Jabber_PollMessages HASH(0x557b17e4a5d0) 11 19 198.87 10.47 248.89 50.20 10.05. 12:50:27 HASH(JabberInterface)
WEB_10.42.4.0_46674 FW_Read 10 3 19.98 6.66 0.00 0.00 10.05. 12:50:29 HASH(WEB_10.42.4.0_46674)
...
Jegliches Schalten von Z-Wave- oder HM-Devices passiert in der containerisierten Variante mit merklicher Verzögerung. (bis zu 2 Sekunden)
Dank dieser Metriken konnte ich bereits feststellen, dass eine DB-Verbindung in der Hostname noch nicht passt und die Verbindung nicht möglich ist. Octoprint ebenso. Beides korrigiert und die Perfomance schaut schon deutlich besser aus.
Das Jabberinterface scheint gar nicht zu funkionieren. Vielleicht hat das hiermit zu tun: https://github.com/fhem/fhem-docker/issues/40 (https://github.com/fhem/fhem-docker/issues/40)
Warum aber habe ich bei HMUARTLGW_Read und ZWDongle_Read so hohe Werte? HM- wie ZW-Dongles sind über LAN angebunden.
Kann mir jemand anhand einer Zeile vielleicht verdeutlichen, was die einzelnen Spalten exakt bedeuten. (So vermute ich nur, weiß es aber nicht sicher...)
Es sieht nun schon viel besser aus. Das JabberInterface muss ich noch zum laufen bringen...
active-timers: 33; max-active timers: 39; max-timer-load: 7 min-tmrHandlingTm: 0.0ms; max-tmrHandlingTm: 352.1ms; totAvgDly: 11.0ms
name function max count total average maxDly avgDly TS Max call param Max call
tmr-Jabber_PollMessages HASH(0x558453196958) 351 875 11031.27 12.61 6500.15 10.49 10.05. 13:31:18 HASH(JabberInterface)
tmr-ONKYO_AVR_connectionCheck HASH(0x558453d92ef0) 172 29 1844.30 63.60 2.44 1.37 10.05. 13:50:23 HASH(PioneerVSX)
WEB_10.42.4.0_15186 FW_Read 166 10 273.22 27.32 0.00 0.00 10.05. 13:52:54 HASH(WEB_10.42.4.0_15186)
DBLogging DbLog_Set 61 4 185.26 46.32 0.00 0.00 10.05. 13:52:15 HASH(DBLogging); DBLogging; ?
tmr-CUL_HM_ActCheck ActionDetector 49 3 53.95 17.98 2.28 1.32 10.05. 13:31:14 ActionDetector
tmr-Wunderground_GetStatus HASH(0x55845432e3e0) 39 6 151.04 25.17 3.43 1.74 10.05. 13:51:16 HASH(WuWeatherSomewhere)
hmLanGw01 HMUARTLGW_Read 26 728 1125.44 1.55 0.00 0.00 10.05. 13:23:49 HASH(hmLanGw01)
tmr-OctoPrint_GetStatus HASH(0x558455c40c98) 21 77 474.97 6.17 2.66 1.16 10.05. 13:24:11 HASH(PrusaMini)
hmLanGw03 HMUARTLGW_Read 17 639 781.26 1.22 0.00 0.00 10.05. 13:29:46 HASH(hmLanGw03)
tmr-CUL_HM_cfgStateUpdate cfgStateUpdate 17 1 17.73 17.73 1.26 1.26 10.05. 13:25:18 cfgStateUpdate:LichtschalterGarderobe
tmr-MPD_try_idle HASH(0x55844dfa77d8) 13 29 181.34 6.25 1.54 1.02 10.05. 13:51:17 HASH(MyMPD)
Jabber läuft, wenn man libauthen-sasl-cyrus-perl entfernt. Jetzt muss ich mir wohl glatt ein eigenes Image bauen...