Hallo, ich habe ein Anmeldeproblem mit dem Temperaturmesser HM-WDS30-OT2-SM-2. Ein HM-WDS30-OT2-SM habe ich schon und der läuft problemlos, wie etwas 50 andere Geräte in meinem FHEM.
Im Log bekomme ich folgende Meldung:
2023.06.05 16:00:46 2: autocreate: define HM_7B2E19 CUL_HM 7B2E19
2023.06.05 16:00:46 2: autocreate: define FileLog_HM_7B2E19 FileLog ./log/HM_7B2E19-%Y.log HM_7B2E19
2023.06.05 16:00:48 3: CUL_HM pair: HM_7B2E19 THSensor, model HM-WDS30-OT2-SM-2 serialNr
2023.06.05 16:00:48 3: HMLAN1: Unknown code A1A8284007B2E190000001201025345513331373931383270010500::-51:HMLAN1, help me!Im FHEM wird folgenes angezeigt:
FileLog_HM_7B2E19 active FileLog
HM_7B2E19_Event T: 0.3 CUL_HM
HM_7B2E19_T1 ??? CUL_HM
HM_7B2E19_T1_T2 ??? CUL_HM
HM_7B2E19_T2 ??? CUL_HM
HM_7B2E19_T2_T1 ??? CUL_HMIch habe das Gerät schon mehrfach neu angemeldet, immer mit dem gleichen Ergebnis.
Auch getConfig hilft nicht.
Wie kriege ich das Gerät angemeldet.
Ich nutze FHEM, kenne mich aber nicht in der Tiefe des Systems nicht aus.
Wilhelm
Bist Du sicher auf Deinem HMLAN1 einen hnPairForSec <sekunden> gemacht zu haben?
Wenn ja: öfter probieren, bei mir hats auch gezickt.
Ich bin mir ziemlich sicher, dass ich hmPairForSec gemacht habe.
Ich habe es wohl mindestens 10 mal gemacht. Auch getConfig habe ich sehr oft gemacht.
Vor gut einer Woche habe ich Rolladenaktoren ohne probleme angemeldet.
Noch ein Auszug vom Log:
2023.06.06 12:11:10 3: HMUARTLGW HMLAN1 entered pairing-mode
2023.06.06 12:11:11 3: CUL_HM set HM_6B7EFB_Dim_V_01 statusRequest noArg
2023.06.06 12:11:12 3: CUL_HM set HM_6B7EFB_Dim_V_02 statusRequest noArg
2023.06.06 12:11:13 3: CUL_HM set HM_6B7F77_Dim statusRequest noArg
2023.06.06 12:11:14 3: CUL_HM set HM_6B7F77_Dim_V_01 statusRequest noArg
2023.06.06 12:11:15 3: CUL_HM set HM_6B7F77_Dim_V_02 statusRequest noArg
2023.06.06 12:11:16 3: CUL_HM set HM_6B7FD2_Dim statusRequest noArg
2023.06.06 12:11:17 3: CUL_HM set HM_6B7FD2_Dim_V_01 statusRequest noArg
2023.06.06 12:11:18 3: CUL_HM set HM_6B7FD2_Dim_V_02 statusRequest noArg
2023.06.06 12:11:18 2: autocreate: define HM_7B2E19 CUL_HM 7B2E19
2023.06.06 12:11:18 2: autocreate: define FileLog_HM_7B2E19 FileLog ./log/HM_7B2E19-%Y.log HM_7B2E19
2023.06.06 12:11:20 3: CUL_HM pair: HM_7B2E19 THSensor, model HM-WDS30-OT2-SM-2 serialNr
2023.06.06 12:11:20 3: HMLAN1: Unknown code A1A6184007B2E190000001201025345513331373931383270010500::-49:HMLAN1, help me!
Wilhelm
Nachtrag : Was bedeutet - 49?
Ich würde mal ins Homematic Unterforum verschieben.
EDIT:
Zitat von: help CUL_HMModule: 10_CUL_HM.pm Maintainer: martinp876 Forum: HomeMatic
Kannst du selber tun!
-49 bzw. -51 (zuvor) -> rssi
Wie aktuell ist fhem?
vccu?
list vom HMLAN?
HM_7B2E19, HM_7B2E19_T1, HM_7B2E19_T2 angelegt?
lists davon?
Und: zu viele Kommandos loszuschießen bevor Kommandos die noch "unterwegs sind" abgearbeitet sind macht keinen Sinn.
Bei Batteriegeräten auch bei den Kommandos immer mal wieder die "Anlern-Taste" drücken.
(aber KEINEN Reset aus versehen / ab und an sind die Vorgänge ähnlich ;) )
Und eben nicht resetten oder löschen usw.
Aber ohne lists: schwierig
Hast du HMIP Geräte im Einsatz?
Dein Nachbar?
Bin nicht sicher aber:
Zitat2023.06.06 12:11:20 3: HMLAN1: Unknown code A1A6184007B2E190000001201025345513331373931383270010500::-49:HMLAN1, help me!
könnte sowas sein?
EDIT: mit dem RSSI aber eher nicht der Nachbar?
Welche FW hat dein HMLAN?
(würde verm. im list stehen)
Gruß, Joachim
Viele Frage.
Ich habe vor zwei Tagen ein FHEM update gemacht.
List HMLAN1:
Internals:
AssignedPeerCnt 51
CNT 195
Clients :CUL_HM:
DEF 192.168.92.5
DEVCNT 195
DevState 99
DevType LGW
DeviceName 192.168.92.5:2000
FD 345
FUUID 637cee64-f33f-a974-4f79-6a5cb9eab9045c60
LastOpen 1686046540.81927
NAME HMLAN1
NOTIFYDEV global
NR 17
NTFY_ORDER 47-HMLAN1
PARTIAL
RAWMSG 040213
RSSI -52
STATE opened
TYPE HMUARTLGW
XmitOpen 1
eventCount 7
model eQ3-HM-LGW
msgLoadCurrent 10
msgLoadHistory 0/2/-2/0/0/0/0/1/0/0/0/0
msgLoadHistoryAbs 10/10/8/10/10/10/10/10/9/9/9/9/9
owner 2CD69E
owner_CCU VCCU
Helper:
CreditTimer 6728
FW 65542
Initialized 1
SendCnt 1938
AckPending:
LastSendLen:
3
3
Log:
IDs:
PendingCMD:
RoundTrip:
Delay 0.00419116020202637
loadLvl:
lastHistory 1686147346.02307
MatchList:
1:CUL_HM ^A......................
Peers:
2EA803 +2EA803,00,00,00
34C9C0 +34C9C0,00,00,00
38B459 +38B459,00,00,00
3E4396 +3E4396,00,00,00
3F5B75 +3F5B75,00,00,00
4569CF +4569CF,00,00,00
490CF4 +490CF4,00,00,00
51239A +51239A,00,00,00
51CFB5 +51CFB5,00,00,00
51D17F +51D17F,00,00,00
5467A2 +5467A2,00,00,00
5635D1 +5635D1,00,00,00
588451 +588451,02,00,00
5D08DD +5D08DD,00,00,00
5EA5B6 +5EA5B6,00,00,00
60EDEF +60EDEF,00,00,00
61060D +61060D,00,00,00
6509D1 +6509D1,00,00,00
67E5EE +67E5EE,00,00,00
6A2BC6 +6A2BC6,00,00,00
6A2BEB +6A2BEB,00,00,00
6A7A5E +6A7A5E,00,00,00
6B5886 +6B5886,02,00,00
6B7EFB +6B7EFB,00,00,00
6B7F77 +6B7F77,00,00,00
6B7FD2 +6B7FD2,00,00,00
6B80D4 +6B80D4,00,00,00
6C2EBE +6C2EBE,00,00,00
6C3683 +6C3683,00,00,00
6C8844 +6C8844,00,00,00
6DDD8A +6DDD8A,00,00,00
6ED40A +6ED40A,00,00,00
6ED637 +6ED637,00,00,00
6F4AA0 +6F4AA0,00,00,00
6F4AAE +6F4AAE,00,00,00
6F4EE0 +6F4EE0,00,00,00
6FD2D7 +6FD2D7,00,00,00
701C2B +701C2B,00,00,00
701C76 +701C76,00,00,00
701CBD +701CBD,00,00,00
701D29 +701D29,00,00,00
7318B5 +7318B5,00,00,00
731B5C +731B5C,00,00,00
74699F +74699F,00,00,00
7469B1 +7469B1,00,00,00
7469C9 +7469C9,00,00,00
746A3C +746A3C,00,00,00
74C45D +74C45D,00,00,00
77786F +77786F,00,00,00
777904 +777904,00,00,00
7B2E19 +7B2E19,00,00,00
READINGS:
2023-06-06 12:15:45 D-HMIdAssigned 2CD69E
2023-06-06 12:15:45 D-HMIdOriginal FFFFFF
2023-06-06 12:15:41 D-LANfirmware 1.1.3 (outdated)
2023-06-06 12:15:45 D-firmware 1.0.6 (outdated)
2023-06-06 12:15:41 D-serialNr SEQ1295622
2023-06-06 12:15:41 D-type eQ3-HM-LGW
2022-11-06 17:22:42 Xmit-Events disconnected:2
2023-06-06 12:15:46 cond ok
2023-06-07 16:15:10 load 10
2023-06-06 12:15:46 loadLvl low
2022-10-20 17:14:55 prot_ERROR-Overload last
2022-10-20 17:13:51 prot_Warning-HighLoad last
2022-11-06 17:22:42 prot_disconnected last
2022-11-06 12:38:04 prot_dummy last
2022-11-04 20:03:08 prot_init last
2022-11-04 18:49:27 prot_keepAlive last
2022-11-04 20:03:08 prot_ok last
2017-04-26 10:10:20 prot_timeout last
2023-06-06 12:15:40 state opened
helper:
keepAlive:
CNT 149
DEVCNT 148
DevState 99
DevType LGW-KeepAlive
DeviceName 192.168.92.5:2001
FD 4
LastOpen 1686046541.17599
NAME HMLAN1:keepAlive
NR 2654
PARTIAL
STATE opened
TEMPORARY 1
TYPE HMUARTLGW
XmitOpen 0
eventCount 1
Helper:
NextKeepAlive 1686147532.59609
Log:
Resolve 1
IDs:
READINGS:
2023-06-06 12:15:41 state opened
Attributes:
hmId 2CD69E
lgwPw *c3KAUWRQR
List HM_7B2E19 so wie angelegt, nur room geändert:
define HM_7B2E19 CUL_HM 7B2E19
setuuid HM_7B2E19 647f0646-f33f-a974-b46d-5e917c90f418bfcd
attr HM_7B2E19 .mId 0102
attr HM_7B2E19 IOgrp VCCU:HMLAN1
attr HM_7B2E19 autoReadReg 4_reqStatus
attr HM_7B2E19 expert rawReg
attr HM_7B2E19 firmware 1.2
attr HM_7B2E19 model HM-WDS30-OT2-SM-2
attr HM_7B2E19 room Garten 271
attr HM_7B2E19 serialNr SEQ3179182
attr HM_7B2E19 subType THSensor
attr HM_7B2E19 webCmd getConfig:clear msgEvents
define FileLog_HM_7B2E19 FileLog ./log/HM_7B2E19-%Y.log HM_7B2E19
setuuid FileLog_HM_7B2E19 647f0646-f33f-a974-5d9e-348de7001a0eb306
attr FileLog_HM_7B2E19 logtype text
attr FileLog_HM_7B2E19 room CUL_HM
define HM_7B2E19_T1 CUL_HM 7B2E1901
setuuid HM_7B2E19_T1 647f0646-f33f-a974-550c-f07d8fe9f502b415
attr HM_7B2E19_T1 model HM-WDS30-OT2-SM-2
attr HM_7B2E19_T1 peerIDs peerUnread
define HM_7B2E19_T2 CUL_HM 7B2E1902
setuuid HM_7B2E19_T2 647f0647-f33f-a974-976a-bdc206d628833444
attr HM_7B2E19_T2 model HM-WDS30-OT2-SM-2
define HM_7B2E19_T1_T2 CUL_HM 7B2E1903
setuuid HM_7B2E19_T1_T2 647f0647-f33f-a974-8636-a97b15235fb2426d
attr HM_7B2E19_T1_T2 model HM-WDS30-OT2-SM-2
define HM_7B2E19_T2_T1 CUL_HM 7B2E1904
setuuid HM_7B2E19_T2_T1 647f0647-f33f-a974-cfd0-ac9fa90ffb85a0a1
attr HM_7B2E19_T2_T1 model HM-WDS30-OT2-SM-2
define HM_7B2E19_Event CUL_HM 7B2E1905
setuuid HM_7B2E19_Event 647f0647-f33f-a974-89c4-a128db6f04982d21
attr HM_7B2E19_Event model HM-WDS30-OT2-SM-2
Ich habe kein HMIP im Einsatz.
soweit ich es weis, hat keiner in meiner Nachbarschaft HM oder HMIP.
Ich hoffe es hilft weiter.
Wilhelm
Also FW: outdated
HMLAN soll mit veralteter FW anfällig(er) gegen Fremdsignale sein...
Sollte sich im Wiki/Forum was finden lassen...
Das vom HM-Device ist kein list ;)
Bitte ein list der 3 Devices (Hauptdevice und 2 Kanäle)...
Gruß, Joachim
List HM_7B2E19
ZitatInternals:
DEF 7B2E19
FUUID 647f0646-f33f-a974-b46d-5e917c90f418bfcd
HMLAN1_MSGCNT 698
HMLAN1_RAWMSG 05000036A686707B2E19000000000264
HMLAN1_RSSI -54
HMLAN1_TIME 2023-06-07 18:04:29
IODev HMLAN1
LASTInputDev HMLAN1
MSGCNT 698
NAME HM_7B2E19
NR 2645
NTFY_ORDER 48-HM_7B2E19
STATE T: 0.2
TYPE CUL_HM
channel_01 HM_7B2E19_T1
channel_02 HM_7B2E19_T2
channel_03 HM_7B2E19_T1_T2
channel_04 HM_7B2E19_T2_T1
channel_05 HM_7B2E19_Event
disableNotifyFn 1
eventCount 896
lastMsg No:A6 - t:70 s:7B2E19 d:000000 000264
protCmdDel 60
protLastRcv 2023-06-07 18:04:29
protRcv 698 last_at:2023-06-07 18:04:29
protResnd 24 last_at:2023-06-07 15:37:44
protResndFail 8 last_at:2023-06-07 15:43:25
protSnd 32 last_at:2023-06-07 15:43:21
protState CMDs_done_Errors:1
rssi_at_HMLAN1 cnt:698 min:-63 max:-45 avg:-52.01 lst:-54
READINGS:
2023-06-06 12:11:20 D-firmware 1.2
2023-06-06 12:11:20 D-serialNr SEQ3179182
2023-06-07 15:43:21 IODev HMLAN1
2023-06-07 18:04:29 battery ok
2023-06-07 15:30:27 cfgState updating
2023-06-07 15:43:25 commState CMDs_done_Errors:1
2023-06-07 18:04:29 state T: 0.2
2023-06-07 18:04:29 temperature 0.2
RegL_00.:
VAL
helper:
HM_CMDNR 166
cSnd 012CD69E7B2E1900040000000000,012CD69E7B2E1900040000000000
lastMsgTm 1686153869.28654
mId 00A8
peerFriend -
peerOpt -:THSensor
regLst 0
rxType 140
supp_Pair_Rep 0
tmplChg 0
cfgChk:
idRc01 RegL_00.
cmds:
TmplKey :1686046534.24616:1686046534.27902
TmplTs 1686046534.27902
cmdKey 0:1:0::HM_7B2E19:00A8:01:
cmdLst:
assignHmKey noArg
burstXmit noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
tplDel -tplDel-
tplSet_0 -tplChan-
unpair noArg
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 0
newChn +7B2E19,00,00,00
nextSend 1686153869.38067
rxt 2
vccu VCCU
p:
7B2E19
00
00
00
prefIO:
HMLAN1
mRssi:
mNo A6
io:
HMLAN1:
-48
-48
peerIDsH:
prt:
bErr 0
sProc 0
q:
qReqConf
qReqStat
role:
dev 1
rssi:
at_HMLAN1:
avg -52.0114613180515
cnt 698
lst -54
max -45
min -63
tmpl:
Attributes:
IOgrp VCCU:HMLAN1
autoReadReg 4_reqStatus
expert rawReg
firmware 1.2
model HM-WDS30-OT2-SM-2
room Garten 271
serialNr SEQ3179182
subType THSensor
webCmd getConfig:clear msgEvents
List HM_7B2E19_T1
Internals:
DEF 7B2E1901
FUUID 647f0646-f33f-a974-550c-f07d8fe9f502b415
NAME HM_7B2E19_T1
NR 2647
NTFY_ORDER 48-HM_7B2E19_T1
STATE ???
TYPE CUL_HM
chanNo 01
device HM_7B2E19
disableNotifyFn 1
eventCount 128
READINGS:
2023-06-07 15:30:27 cfgState updating
2023-06-07 15:43:25 commState CMDs_done_Errors:1
helper:
getCfgListNo
peerFriend
peerIDsState peerUnread
peerOpt p:THSensor
regLst
tmplChg 0
cfgChk:
idPz00 fail
cmds:
TmplKey :1686046534.24616:1686046534.27908
TmplTs 1686046534.27908
cmdKey 1:0:0::HM_7B2E19:00A8:01:
cmdLst:
burstXmit noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
getConfig noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan 0 -actChn- [({single})] [({set}|unset)] [actor|remote|both]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
tplDel -tplDel-
tplSet_0 -tplChan-
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
peerIDsH:
role:
chn 1
tmpl:
Attributes:
model HM-WDS30-OT2-SM-2
peerIDs peerUnreadList HM_7B2E19_T2
Internals:
DEF 7B2E1902
FUUID 647f0647-f33f-a974-976a-bdc206d628833444
NAME HM_7B2E19_T2
NR 2648
NTFY_ORDER 48-HM_7B2E19_T2
STATE ???
TYPE CUL_HM
chanNo 02
device HM_7B2E19
disableNotifyFn 1
eventCount 128
READINGS:
2023-06-07 15:30:27 cfgState updating
2023-06-07 15:43:25 commState CMDs_done_Errors:1
helper:
getCfgListNo
peerFriend
peerOpt p:THSensor
regLst
tmplChg 0
cfgChk:
idPz00 fail
cmds:
TmplKey :1686046245.55756:noAssTs
TmplTs 1686046534.27912
cmdKey 1:0:0::HM_7B2E19:00A8:02:
cmdLst:
burstXmit noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
getConfig noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan 0 -actChn- [({single})] [({set}|unset)] [actor|remote|both]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
tplDel -tplDel-
tplSet_0 -tplChan-
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
peerIDsH:
role:
chn 1
tmpl:
Attributes:
model HM-WDS30-OT2-SM-2Gruß
Wilhelm
1. setze mal im hauptdevice "attr commStInChn off"
2. dann "attr autoReadReg 5_missing"
3. dann erneut "drüberpairen".
4. warten, ggf knöpfchen drücken.
zum abschluss zeige "get list full"
Was ist "drüberpairen"?
pairen ohne löschen/resetten.
ich habe 2mal gepairt, einmal ohne und einmal mit Knopf drücken
Internals:
.AttrList .devInfo .mId .stc IODev IOgrp actCycle actStatus aesCommReq:1,0 aesKey:5,4,3,2,1,0 autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto commStInCh:on,off do_not_notify:1,0 dummy:1,0 event-aggregator event-min-interval event-on-change-reading event-on-update-reading expert:multiple,defReg,allReg,rawReg,templ,none firmware hmKey hmKey2 hmKey3 hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger ignore:1,0 model modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-2-PBU-FM-2,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 msgRepeat oldreadings param readOnly:0,1 readingOnDead:multiple,noChange,state,periodValues,periodString,channels rssiLog:1,0 serialNr showtime:1,0 stateFormat:textField-long subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic timestamp-on-change-reading
.triggerUsed 1
DEF 7B2E19
FUUID 647f0646-f33f-a974-b46d-5e917c90f418bfcd
HMLAN1_MSGCNT 730
HMLAN1_RAWMSG 05000030C386537B2E19000000004101064200FF43000744FFF9
HMLAN1_RSSI -48
HMLAN1_TIME 2023-06-07 19:18:06
IODev HMLAN1
LASTInputDev HMLAN1
MSGCNT 730
NAME HM_7B2E19
NR 2645
NTFY_ORDER 48-HM_7B2E19
STATE CMDs_pending
TYPE CUL_HM
channel_01 HM_7B2E19_T1
channel_02 HM_7B2E19_T2
channel_03 HM_7B2E19_T1_T2
channel_04 HM_7B2E19_T2_T1
channel_05 HM_7B2E19_Event
disableNotifyFn 1
eventCount 931
lastMsg No:C3 - t:53 s:7B2E19 d:000000 004101064200FF43000744FFF9
protCmdDel 60
protCmdPend 6 CMDs_pending
protLastRcv 2023-06-07 19:18:06
protRcv 730 last_at:2023-06-07 19:18:06
protResnd 24 last_at:2023-06-07 15:37:44
protResndFail 8 last_at:2023-06-07 15:43:25
protSnd 36 last_at:2023-06-07 19:18:06
protState CMDs_pending
rssi_at_HMLAN1 cnt:730 min:-63 max:-45 avg:-52.17 lst:-48
.attraggr:
.attrminint:
CL:
Authenticated 0
BUF
FD 349
FW_ID 3189
LASTACCESS 1686158328.79637
NAME WEB_Test_192.168.92.102_52508
NR 3187
PEER 192.168.92.102
PORT 52508
SNAME WEB_Test
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
encoding UTF-8
.attraggr:
.attrminint:
READINGS:
2023-06-07 19:17:39 state Connected
READINGS:
2023-06-07 19:15:30 .D-devInfo 010500
2023-06-07 19:15:30 .D-stc 70
2023-06-06 12:11:20 .R-pairCentral set_0x2CD69E
2023-06-07 19:15:35 .associatedWith HM_7B2E19,HM_7B2E19_Event,HM_7B2E19_T1,HM_7B2E19_T1_T2,HM_7B2E19_T2,HM_7B2E19_T2_T1,HM_7B2E19
2023-06-07 19:18:06 .protLastRcv 20230607191806
2023-06-07 19:15:30 CommandAccepted yes
2023-06-07 19:15:30 D-firmware 1.2
2023-06-07 19:15:30 D-serialNr SEQ3179182
2023-06-07 19:18:06 IODev HMLAN1
2023-06-07 19:18:06 battery ok
2023-06-07 19:18:06 cfgState updating
2023-06-07 19:18:12 commState CMDs_pending
2023-06-07 19:18:12 state CMDs_pending
2023-06-07 19:12:45 temperature 0.3
RegL_00.:
VAL
cmdStack:
++A0012CD69E7B2E1900040000000000
##A0012CD69E7B2E190103
##A0012CD69E7B2E190203
##A0012CD69E7B2E190303
##A0012CD69E7B2E190403
##A0012CD69E7B2E190503
helper:
HM_CMDNR 196
cSnd 012CD69E7B2E190006,012CD69E7B2E1900040000000000
cfgStateUpdt 0
lastMsgTm 1686158286.90191
mId 00A8
peerFriend -
peerOpt -:THSensor
regLst 0
rxType 140
supp_Pair_Rep 0
tmplChg 0
cfgChk:
idRc01 RegL_00.
idRc03 fail
cmds:
TmplKey :1686046534.24616:1686158135.13422
TmplTs 1686158135.13422
cmdKey 0:1:0::HM_7B2E19:00A8:00:
cmdLst:
assignHmKey noArg
burstXmit noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
tplDel -tplDel-
tplSet_0 -tplChan-
unpair noArg
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 2
newChn +7B2E19,02,00,00
nextSend 1686158286.996
rxt 2
vccu VCCU
p:
7B2E19
00
00
00
prefIO:
HMLAN1
mRssi:
mNo C3
io:
HMLAN1:
-40
-40
peerIDsH:
prt:
bErr 0
sProc 2
q:
qReqConf
qReqStat
role:
dev 1
rssi:
at_HMLAN1:
avg -52.1753424657534
cnt 730
lst -48
max -45
min -63
shadowReg:
RegL_00. 02:01 0A:2C 0B:D6 0C:9E
tmpl:
Attributes:
.mId 0102
IOgrp VCCU:HMLAN1
autoReadReg 5_readMissing
commStInCh off
expert rawReg
firmware 1.2
model HM-WDS30-OT2-SM-2
room Garten 271
serialNr SEQ3179182
subType THSensor
webCmd getConfig:clear msgEvents
Es sind noch cmds_pending: so lange "Anlern-Knopf" drücken, bis die abgearbeitet sind...
Gruß, Joachim
Scheint jetzt zu funktionieren, die Temperaturen sind da.
Internals:
.AttrList .devInfo .mId .stc IODev IOgrp actCycle actStatus aesCommReq:1,0 aesKey:5,4,3,2,1,0 autoReadReg:0_off,1_restart,2_pon-restart,3_onChange,4_reqStatus,5_readMissing,8_stateOnly burstAccess:0_off,1_auto commStInCh:on,off do_not_notify:1,0 dummy:1,0 event-aggregator event-min-interval event-on-change-reading event-on-update-reading expert:multiple,defReg,allReg,rawReg,templ,none firmware hmKey hmKey2 hmKey3 hmProtocolEvents:0_off,1_dump,2_dumpFull,3_dumpTrigger ignore:1,0 model modelForce:ACTIONDETECTOR,ACTIONDETECTOR,ASH550,ASH550I,CCU-FHEM,CMM,DORMA_ATENT,DORMA_BRC-H,DORMA_RC-H,HM-CC-RT-DN,HM-CC-RT-DN-BOM,HM-CC-SCD,HM-CC-TC,HM-CC-VD,HM-DIS-EP-WM55,HM-DIS-TD-T,HM-DIS-WM55,HM-DW-WM,HM-ES-PMSW1-DR,HM-ES-PMSW1-PL,HM-ES-PMSW1-PL-DN-R1,HM-ES-PMSW1-PL-DN-R2,HM-ES-PMSW1-PL-DN-R3,HM-ES-PMSW1-PL-DN-R4,HM-ES-PMSW1-PL-DN-R5,HM-ES-PMSW1-SM,HM-ES-TX-WM,HM-HM-LC-DW-WM,HM-LC-AO-SM,HM-LC-BL1-FM,HM-LC-BL1-FM-2,HM-LC-BL1-PB-FM,HM-LC-BL1-SM,HM-LC-BL1-SM-2,HM-LC-BL1PBU-FM,HM-LC-DDC1-PCB,HM-LC-DIM1L-CV,HM-LC-DIM1L-CV-2,HM-LC-DIM1L-CV-644,HM-LC-DIM1L-PL,HM-LC-DIM1L-PL-2,HM-LC-DIM1L-PL-3,HM-LC-DIM1L-PL-644,HM-LC-DIM1PWM-CV,HM-LC-DIM1PWM-CV-2,HM-LC-DIM1T-CV,HM-LC-DIM1T-CV-2,HM-LC-DIM1T-CV-644,HM-LC-DIM1T-DR,HM-LC-DIM1T-FM,HM-LC-DIM1T-FM-2,HM-LC-DIM1T-FM-644,HM-LC-DIM1T-FM-LF,HM-LC-DIM1T-PL,HM-LC-DIM1T-PL-2,HM-LC-DIM1T-PL-3,HM-LC-DIM1T-PL-644,HM-LC-DIM1TPBU-FM,HM-LC-DIM1TPBU-FM-2,HM-LC-DIM2L-CV,HM-LC-DIM2L-SM,HM-LC-DIM2L-SM-2,HM-LC-DIM2L-SM-644,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM,HM-LC-DIM2T-SM-2,HM-LC-JA1PBU-FM,HM-LC-RGBW-WM,HM-LC-SW1-BA-PCB,HM-LC-SW1-DR,HM-LC-SW1-FM,HM-LC-SW1-FM-2,HM-LC-SW1-PB-FM,HM-LC-SW1-PCB,HM-LC-SW1-PL,HM-LC-SW1-PL-3,HM-LC-SW1-PL-CT-R1,HM-LC-SW1-PL-CT-R2,HM-LC-SW1-PL-CT-R3,HM-LC-SW1-PL-CT-R4,HM-LC-SW1-PL-CT-R5,HM-LC-SW1-PL-DN-R1,HM-LC-SW1-PL-DN-R2,HM-LC-SW1-PL-DN-R3,HM-LC-SW1-PL-DN-R4,HM-LC-SW1-PL-DN-R5,HM-LC-SW1-PL-OM54,HM-LC-SW1-PL2,HM-LC-SW1-SM,HM-LC-SW1-SM-2,HM-LC-SW1-SM-ATMEGA168,HM-LC-SW1PBU-FM,HM-LC-SW2-DR,HM-LC-SW2-DR-2,HM-LC-SW2-FM,HM-LC-SW2-FM-2,HM-LC-SW2-PB-FM,HM-LC-SW2-SM,HM-LC-SW2PBU-FM,HM-LC-SW4-BA-PCB,HM-LC-SW4-DR,HM-LC-SW4-DR-2,HM-LC-SW4-PCB,HM-LC-SW4-PCB-2,HM-LC-SW4-SM,HM-LC-SW4-SM-2,HM-LC-SW4-SM-ATMEGA168,HM-LC-SW4-WM,HM-LC-SW4-WM-2,HM-MOD-EM-8,HM-MOD-EM-8BIT,HM-MOD-RE-8,HM-OU-CF-PL,HM-OU-CFM-PL,HM-OU-CFM-TW,HM-OU-CM-PCB,HM-OU-LED16,HM-PB-2-FM,HM-PB-2-WM,HM-PB-2-WM55,HM-PB-2-WM55-2,HM-PB-4-WM,HM-PB-4DIS-WM,HM-PB-4DIS-WM-2,HM-PB-6-WM55,HM-PBI-4-FM,HM-RC-12,HM-RC-12-B,HM-RC-12-SW,HM-RC-19,HM-RC-19-B,HM-RC-19-SW,HM-RC-2-PBU-FM,HM-RC-2-PBU-FM-2,HM-RC-4,HM-RC-4-2,HM-RC-4-3,HM-RC-4-3-D,HM-RC-4-B,HM-RC-8,HM-RC-DIS-H-X-EU,HM-RC-KEY3,HM-RC-KEY3-B,HM-RC-KEY4-2,HM-RC-KEY4-3,HM-RC-P1,HM-RC-SEC3,HM-RC-SEC3-B,HM-RC-SEC4-2,HM-RC-SEC4-3,HM-SCI-3-FM,HM-SEC-CEN,HM-SEC-KEY,HM-SEC-KEY-O,HM-SEC-KEY-S,HM-SEC-MDIR,HM-SEC-MDIR-2,HM-SEC-MDIR-3,HM-SEC-RHS,HM-SEC-RHS-2,HM-SEC-SC,HM-SEC-SC-2,HM-SEC-SCO,HM-SEC-SD,HM-SEC-SD-2,HM-SEC-SFA-SM,HM-SEC-SIR-WM,HM-SEC-TIS,HM-SEC-WDS,HM-SEC-WDS-2,HM-SEC-WIN,HM-SEN-DB-PCB,HM-SEN-EP,HM-SEN-LI-O,HM-SEN-MDIR-O,HM-SEN-MDIR-O-2,HM-SEN-MDIR-O-3,HM-SEN-MDIR-SM,HM-SEN-MDIR-WM55,HM-SEN-RD-O,HM-SEN-WA-OD,HM-SWI-3-FM,HM-SYS-SRP-PL,HM-TC-IT-WM-W-EU,HM-WDC7000,HM-WDS10-TH-O,HM-WDS100-C6-O,HM-WDS100-C6-O-2,HM-WDS20-TH-O,HM-WDS30-OT2-SM,HM-WDS30-OT2-SM-2,HM-WDS30-T-O,HM-WDS40-TH-I,HM-WDS40-TH-I-2,HM-WS550,HM-WS550LCB,HM-WS550LCW,HM-WS550TECH,IS-WDS-TH-OD-S-R3,KFM-DISPLAY,KFM-SENSOR,KS550,KS550LC,KS550TECH,KS888,OLIGO-SMART-IQ-HM,PS-SWITCH,PS-TH-SENS,ROTO_ZEL-STG-RM-DWT-10,ROTO_ZEL-STG-RM-FDK,ROTO_ZEL-STG-RM-FEP-230V,ROTO_ZEL-STG-RM-FFK,ROTO_ZEL-STG-RM-FSA,ROTO_ZEL-STG-RM-FSS-UP3,ROTO_ZEL-STG-RM-FST-UP4,ROTO_ZEL-STG-RM-FWT,ROTO_ZEL-STG-RM-FZS,ROTO_ZEL-STG-RM-FZS-2,ROTO_ZEL-STG-RM-HS-4,ROTO_ZEL-STG-RM-WT-2,S550IA,SCHUECO_263-130,SCHUECO_263-131,SCHUECO_263-132,SCHUECO_263-133,SCHUECO_263-134,SCHUECO_263-135,SCHUECO_263-144,SCHUECO_263-145,SCHUECO_263-146,SCHUECO_263-147,SCHUECO_263-155,SCHUECO_263-157,SCHUECO_263-158,SCHUECO_263-160,SCHUECO_263-162,SCHUECO_263-167,SCHUECO_263-XXX,SENSOTIMER-ST-6,VIRTUAL,WDF-SOLAR,WS888 msgRepeat oldreadings param readOnly:0,1 readingOnDead:multiple,noChange,state,periodValues,periodString,channels rssiLog:1,0 serialNr showtime:1,0 stateFormat:textField-long subType:AlarmControl,KFM100,THSensor,blindActuator,blindActuatorSol,dimmer,display,keyMatic,motionAndBtn,motionDetector,no,outputUnit,powerMeter,powerSensor,pushButton,remote,repeater,rgb,senBright,sensRain,sensor,singleButton,siren,smokeDetector,swi,switch,thermostat,threeStateSensor,timer,tipTronic,virtual,winMatic timestamp-on-change-reading
.triggerUsed 1
DEF 7B2E19
FUUID 647f0646-f33f-a974-b46d-5e917c90f418bfcd
HMLAN1_MSGCNT 840
HMLAN1_RAWMSG 0500003BCD86537B2E190000000041015E42011943004544FFBB
HMLAN1_RSSI -59
HMLAN1_TIME 2023-06-07 19:43:16
IODev HMLAN1
LASTInputDev HMLAN1
MSGCNT 840
NAME HM_7B2E19
NR 2645
NTFY_ORDER 48-HM_7B2E19
STATE CMDs_done
TYPE CUL_HM
channel_01 HM_7B2E19_T1
channel_02 HM_7B2E19_T2
channel_03 HM_7B2E19_T1_T2
channel_04 HM_7B2E19_T2_T1
channel_05 HM_7B2E19_Event
disableNotifyFn 1
eventCount 1058
lastMsg No:CD - t:53 s:7B2E19 d:000000 0041015E42011943004544FFBB
protCmdDel 60
protLastRcv 2023-06-07 19:43:16
protRcv 840 last_at:2023-06-07 19:43:16
protResnd 30 last_at:2023-06-07 19:32:43
protResndFail 8 last_at:2023-06-07 15:43:25
protSnd 120 last_at:2023-06-07 19:40:05
protState CMDs_done
rssi_at_HMLAN1 cnt:840 min:-72 max:-36 avg:-51.42 lst:-59
.attraggr:
.attrminint:
CL:
Authenticated 0
BUF
FD 344
FW_ID 3253
LASTACCESS 1686159908.10172
NAME WEB_Test_192.168.92.102_54835
NR 3254
PEER 192.168.92.102
PORT 54835
SNAME WEB_Test
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
encoding UTF-8
.attraggr:
.attrminint:
READINGS:
2023-06-07 19:44:41 state Connected
READINGS:
2023-06-07 19:40:11 .D-devInfo 010500
2023-06-07 19:40:11 .D-stc 70
2023-06-07 19:25:25 .R-burstRx off
2023-06-07 19:25:25 .R-cyclicInfoMsgDis 0
2023-06-07 19:25:25 .R-localResDis off
2023-06-07 19:40:03 .R-pairCentral 0x2CD69E
2023-06-07 19:25:25 .R-paramSel T1_T2
2023-06-07 19:40:01 .associatedWith HM_7B2E19,HM_7B2E19_Event,HM_7B2E19_T1,HM_7B2E19_T1_T2,HM_7B2E19_T2,HM_7B2E19_T2_T1,HM_7B2E19
2023-06-07 19:43:16 .protLastRcv 20230607194316
2023-06-07 19:39:57 CommandAccepted yes
2023-06-07 19:40:11 D-firmware 1.2
2023-06-07 19:40:11 D-serialNr SEQ3179182
2023-06-07 19:40:03 IODev HMLAN1
2023-06-07 19:40:03 PairedTo 0x2CD69E
2023-06-07 19:40:03 RegL_00. 00:00 01:00 02:01 0A:2C 0B:D6 0C:9E 11:00 18:00 1B:03
2023-06-07 19:43:16 battery ok
2023-06-07 19:41:05 cfgState ok
2023-06-07 19:40:05 commState CMDs_done
2023-06-07 19:40:05 state CMDs_done
2023-06-07 19:12:45 temperature 0.3
helper:
HM_CMDNR 205
cSnd 012CD69E7B2E190403,012CD69E7B2E190503
cfgStateUpdt 0
lastMsgTm 1686159796.18448
mId 00A8
peerFriend -
peerOpt -:THSensor
regLst 0
rxType 140
supp_Pair_Rep 0
tmplChg 0
cmds:
TmplKey :1686046534.24616:1686159601.89489
TmplTs 1686159601.89489
cmdKey 0:1:0::HM_7B2E19:00A8:00:
cmdLst:
assignHmKey noArg
burstXmit noArg
clear [({msgErrors}|msgEvents|rssi|attack|trigger|register|oldRegs|readings|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
tplDel -tplDel-
tplSet_0 -tplChan-
unpair noArg
lst:
condition slider,0,1,255
peer
peerOpt
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 0
newChn +7B2E19,00,00,00
nextSend 1686159796.2784
rxt 2
vccu VCCU
p:
7B2E19
00
00
00
prefIO:
HMLAN1
mRssi:
mNo CD
io:
HMLAN1:
-53
-53
peerIDsH:
prt:
bErr 0
sProc 0
try 1
rspWait:
tryMsg:
q:
qReqConf
qReqStat
regCollect:
role:
dev 1
rssi:
at_HMLAN1:
avg -51.4297619047619
cnt 840
lst -59
max -36
min -72
shadowReg:
tmpl:
Attributes:
.mId 0102
IOgrp VCCU:HMLAN1
autoReadReg 5_readMissing
commStInCh off
expert rawReg
firmware 1.2
model HM-WDS30-OT2-SM-2
room Garten 271
serialNr SEQ3179182
subType THSensor
webCmd getConfig:clear msgEvents
Zitat von: rud0815 am 07 Juni 2023, 19:46:14Scheint jetzt zu funktionieren, die Temperaturen sind da.
Temperaturen sind da ist kein Kriterium für "fertig" ;)
Selbst ohne gepaired zu sein würde fhem die Daten empfangen und anzeigen...
...du könntest aber keine Befehle absetzen.
Bei Sensoren fällt das meist gar nicht auf, weil man da eh selten was setzt.
Außer Register gäbe es meist eh nichts...
Entscheidender ist:
Zitat von: rud0815 am 07 Juni 2023, 19:46:142023-06-07 19:40:03 .R-pairCentral 0x2CD69E
Evtl. doch mal angehen?
https://forum.fhem.de/index.php?topic=133874.msg1278201#msg1278201
Viel Spaß dann, Joachim
ZitatEvtl. doch mal angehen?
https://forum.fhem.de/index.php?topic=133874.msg1278201#msg1278201
Ich habe die Firmware gesucht, aber nicht gefunden.
Wobei ich grad geschaut habe welchen LAN-Gateway du hast...
Bei dem von dir im Einsatz befindlichen weiß ich jetzt nicht bzgl. FW usw.
Wenn es läuft... ;)
Gruß, Joachim
Danke.
Ich schließe diesen Faden.
https://wiki.fhem.de/wiki/HM-LGW-O-TW-W-EU_Funk-LAN_Gateway (https://wiki.fhem.de/wiki/HM-LGW-O-TW-W-EU_Funk-LAN_Gateway)
schau da unter Firmware -> ist beschrieben - auch die benötigten Sw stände
Zitat von: rud0815 am 07 Juni 2023, 20:31:33Danke.
Ich schließe diesen Faden.
Du solltest aber wirklich die Firmware aktualisieren:
Zitat2023-06-06 12:15:41 D-LANfirmware 1.1.3 (outdated)
2023-06-06 12:15:45 D-firmware 1.0.6 (outdated)
Mach das ev. mit dem netfinder hier initial beschrieben https://wiki.fhem.de/wiki/HM-LGW-O-TW-W-EU_Funk-LAN_Gateway
Achtung es gibt zwei Firmware Pakete - bei Dir sind beide alt!
Aber ich rede nur theoretisch, ich habe dieses Gateway nicht. Leider ist die Webseite zum download bei eq3 nicht so doll. Es gibt aber nach wie vor dieses Projekt: https://github.com/eq-3/occu
Das ist alles uralt, neuere Firmware funktioniert mit dem FHEM Modul nicht, also darauf achten:
Die LAN-Firmware sollte (mindestens auf) Version 1.1.5 sein, die Applikations-Firmware sollte (mindestens auf) Version 1.4.1 sein.
Du musst Dich für genauere Informationen nochmal umsehen, bei dem github projekt sieht man die Firmware Versionen nicht wirklich. Ich würde hoffen netfinder macht das ordentlich.