Hallo zusammen
ich hab mich leider irgendwie verrannt, und ich seh den Wald vor lauter Forenbeiträge nicht mehr :-\
Kann mir kurz jemand Starthilfe geben?
Ich habe eine Bresser Wetterstation 7in1 und ich möchte gerne die Sensordaten (868MHz) zur weiteren Verarbeitung einlesen
Aber irgendwie scheitere ich schon ganz am Anfang
Soweit ich das bisher gelesen habe, brauche ich um die Daten einzulesen einen Signalduino (bzw die FW), richtig ?
Im Wiki Signalduino (https://wiki.fhem.de/wiki/SIGNALduino) heißt es...
"Der SIGNALduino basiert auf einem Arduino Nano, die Schaltung entspricht dem Selbstbau CUL"Heißt das dann nicht auch im Umkehrschluss, dass ich meinen übrigen Busware-CUL V3.4 dafür nehmen kann ?
Ich hab versucht den CUL nach dem Wiki einzurichten/zu flashen allerdings ist der status closed und der Flashversuch wirft Fehlermeldungen
Kann irgendjemand Licht ins Dunkel bringen ?
List sagt...
ZitatInternals:
CFGFN
Clients :CUL_EM:CUL_FHTTK:CUL_TCM97001:CUL_TX:CUL_WS:Dooya:FHT:FLAMINGO:FS10:FS20: :Fernotron:Hideki:IT:KOPP_FC:LaCrosse:OREGON:PCA301:RFXX10REC:Revolt:SD_AS:SD_Rojaflex: :SD_BELL:SD_GT:SD_Keeloq:SD_RSL:SD_UT:SD_WS07:SD_WS09:SD_WS:SD_WS_Maverick:SOMFY: :Siro:SIGNALduino_un:
DEF /dev/serial/by-id/usb-SHA_CUL868-if00
DMSG nothing
DevState INACTIVE
DeviceName /dev/serial/by-id/usb-SHA_CUL868-if00@57600
FLASH_RESULT ERROR: avrdude exited with error
FUUID 6614f1c7-f33f-f943-4e7b-310afc374e54817a
LASTDMSG nothing
LASTDMSGID nothing
NAME CUL_SIGNALduino
NR 222
STATE closed
TIME 1712648647.10603
TYPE SIGNALduino
eventCount 17
initResetFlag 1
initretry 3
sendworking 0
version
versionProtocols 1.53
versionmodul 3.5.5
MatchList:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}[AFaf][A-Fa-f0-9]{2,3}
11:SD_WS09 ^P9#F[A-Fa-f0-9]+
12:SD_WS ^W\d+x{0,1}#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^Ys[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
17:SD_UT ^P(?:14|20|24|26|29|30|34|46|56|68|69|76|78|81|83|86|90|91|91.1|92|93|95|97|99|104|105|114|118|121|127|128)#.*
18:FLAMINGO ^P13\.?1?#[A-Fa-f0-9]+
19:CUL_WS ^K[A-Fa-f0-9]{5,}
1:IT ^i......
20:Revolt ^r[A-Fa-f0-9]{22}
21:FS10 ^P61#[A-F0-9]+
22:Siro ^P72#[A-Fa-f0-9]+
23:FHT ^81..(04|09|0d)..(0909a001|83098301|c409c401)..
24:FS20 ^81..(04|0c)..0101a001
25:CUL_EM ^E0.................
26:Fernotron ^P82#.*
27:SD_BELL ^P(?:15|32|41|42|57|79|96|98|112)#.*
28:SD_Keeloq ^P(?:87|88)#.*
29:SD_GT ^P49#[A-Fa-f0-9]+
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
30:LaCrosse ^(\S+\s+9 |OK\sWS\s)
31:KOPP_FC ^kr\w{18,}
32:PCA301 ^\S+\s+24
33:SD_Rojaflex ^P109#[A-Fa-f0-9]+
3:SD_RSL ^P1#[A-Fa-f0-9]{8}
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
6:SD_AS ^P2#[A-Fa-f0-9]{7,8}
7:Hideki ^P12#75[A-F0-9]+
9:CUL_FHTTK ^T[A-F0-9]{8}
X:SIGNALduino_un ^\d+#.*
QUEUE:
READINGS:
2024-04-09 10:28:02 state closed
additionalSets:
flash 3.5.0,3.4.0,3.3.1
helper:
avrdudecmd avrdude -c arduino -b 57600 -P /dev/serial/by-id/usb-SHA_CUL868-if00 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>./log/SIGNALduino-Flash.log || avrdude -c arduino -b 115200 -P /dev/serial/by-id/usb-SHA_CUL868-if00 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>./log/SIGNALduino-Flash.log
avrdudelogs flashing Arduino CUL_SIGNALduino
hex file: FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex
port: /dev/serial/by-id/usb-SHA_CUL868-if00
command: avrdude -c arduino -b 57600 -P /dev/serial/by-id/usb-SHA_CUL868-if00 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>[LOGFILE] || avrdude -c arduino -b 115200 -P /dev/serial/by-id/usb-SHA_CUL868-if00 -p atmega328p -vv -U flash:w:FHEM/firmware/SIGNALDuino_nanocc1101_3.5.0.hex 2>[LOGFILE]
CUL_SIGNALduino closed
--- AVRDUDE ---------------------------------------------------------------------------------
avrdude: Version 7.1
Copyright the AVRDUDE authors;
see https://github.com/avrdudes/avrdude/blob/main/AUTHORS
System wide configuration file is /etc/avrdude.conf
User configuration file is /opt/fhem/.avrduderc
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/serial/by-id/usb-SHA_CUL868-if00
Using Programmer : arduino
Overriding Baud Rate : 115200
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 1 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 2 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 3 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 4 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 5 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 6 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 7 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 8 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 9 of 10: not in sync: resp=0x00
avrdude: ser_recv(): programmer is not responding
avrdude stk500_recv() error: programmer is not responding
avrdude stk500_getsync() warning: attempt 10 of 10: not in sync: resp=0x00
avrdude main() error: unable to open programmer arduino on port /dev/serial/by-id/usb-SHA_CUL868-if00
avrdude done. Thank you.
--- AVRDUDE ---------------------------------------------------------------------------------
CUL_SIGNALduino reopen started
mcIdList:
mnIdList:
117
msIdList:
muIdList:
Attributes:
group IO_Devices
hardware nanoCC1101
icon cul_868
room System
updateChannelFW stable
whitelist_IDs 117
Zitat von: Mazz78 am 09 April 2024, 10:56:54"Der SIGNALduino basiert auf einem Arduino Nano, die Schaltung entspricht dem Selbstbau CUL"
Das gilt in der Regel, wenn man ihn selbst baut. Ein Busware-CUL ist aber in der Regel mit einem anderen ATMega32 aufgebaut (sollte auch im Wiki stehen, was da bei welcher Variante konkret drin ist).
Vermutlich (!) paßt die radinoCC1101-Variante, aber frag mich nicht, welches flashtool man dafür braucht...
Danke für deine Info
Ich denke ich habe die relevante Info in diesem Beitrag gefunden...
Zitat von: Ralli am 06 September 2023, 18:00:36