Hallo zusammen,
mein "neuer" HM-Sen-DB-PCB hat den STATE "ResndFail" und ich bekomme das nicht alleine gelöst.
Hier ist ein List von meinem HM-Sen-DB-PCB:
Internals:
CUL1_MSGCNT 23
CUL1_RAWMSG A0D00A6104E051FF1430106000000::-41:CUL1:
CUL1_RSSI -41
CUL1_TIME 2024-07-29 18:20:29
DEF 4E051F
FUUID 66a5031f-f33f-eaf8-3b52-d7d156c7630ac25e
IODev CUL1
LASTInputDev CUL1
MSGCNT 23
NAME HM_4E051F
NOTIFYDEV global
NR 1368
NTFY_ORDER 50-HM_4E051F
STATE ResndFail
TYPE CUL_HM
chanNo 01
eventCount 65
lastMsg No:00 - t:10 s:4E051F d:F14301 06000000
protCmdDel 6
protLastRcv 2024-07-29 18:20:29
protRcv 19 last_at:2024-07-29 18:20:29
protResndFail 2 last_at:2024-07-29 18:18:48
protSnd 11 last_at:2024-07-29 18:20:29
rssi_at_CUL1 cnt:23 min:-41 max:-35.5 avg:-37.95 lst:-41
CL:
Authenticated 0
BUF
FD 29
FW_ID 1722270057.54729
LASTACCESS 1722270068.83225
NAME WEB_192.168.xxx.xxx_63664
NR 10004354
PEER 192.168.xxx.xxx
PORT 63664
SNAME WEB
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
encoding UTF-8
READINGS:
2024-07-29 18:17:58 state Connected
READINGS:
2024-07-27 18:16:55 CommandAccepted yes
2024-07-29 18:18:48 D-firmware 1.0
2024-07-29 18:18:48 D-serialNr NEQxxxxxxx
2024-07-27 17:47:36 PairedTo 0xF14301
2024-07-29 18:20:29 alive yes
2024-07-29 18:20:29 battery ok
2024-07-29 18:18:19 cfgState updating
2024-07-29 18:20:29 commState CMDs_done
2024-07-29 18:20:29 powerOn 2024-07-29 18:20:29
2024-07-29 18:20:29 recentStateType info
2024-07-29 18:18:49 state ResndFail
RegL_00.:
VAL
helper:
HM_CMDNR 0
PONtest 0
cSnd
cfgChkResult No regs found for:HM_4E051F-ret--ret-
getCfgList all
getCfgListNo ,4
lastMsgTm 1722270029.34053
mId 00DC
peerFriend peerAct,peerVirt
peerIDsState complete
peerOpt 4:pushButton
regLst 0,1,4p
rxType 4
supp_Pair_Rep 0
cfgChk:
idRc01 RegL_00.,RegL_01.
idRc03 fail
cmds:
TmplKey :no:1722096704.64462
TmplTs 1722096704.64462
cmdKey 1:1:0::HM_4E051F:00DC:01:
cmdLst:
assignHmKey noArg
clear [(readings|trigger|register|oldRegs|rssi|msgEvents|{msgErrors}|attack|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan -btnNumber- -actChn- [({single}|dual|reverse)] [({set}|unset)] [(actor|remote|{both})]
peerSmart -peerOpt-
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
tplDel -tplDel-
tplSet_0 -tplChan-
trgEventL -peer- -condition-
trgEventS -peer- -condition-
trgPressL [(-peer-|{all})]
trgPressS [(-peer-|{all})]
unpair noArg
lst:
condition 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159,160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175,176,177,178,179,180,181,182,183,184,185,186,187,188,189,190,191,192,193,194,195,196,197,198,199,200,201,202,203,204,205,206,207,208,209,210,211,212,213,214,215,216,217,218,219,220,221,222,223,224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239,240,241,242,243,244,245,246,247,248,249,250,251,252,253,254,255
peerOpt HM_29CBB8,HM_29CC62,HM_5C8201,HM_607459,HM_72D479,HM_72D581,HM_72D585,HM_750A4D,VCCU1
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 0
newChn +4E051F,00,00,00
nextSend 1722270029.61439
rxt 0
vccu VCCU1
lRcTm:
CUL1 173574280
mcnt 00
tnms 1061885453
type 10
p:
4E051F
00
00
00
prefIO:
CUL1
mRssi:
mNo 00
io:
CUL1:
-31
-31
peerIDsH:
00000000 broadcast
prt:
bErr 0
sProc 0
rspWait:
q:
qReqConf 00
qReqStat
role:
chn 1
dev 1
rpt:
IO CUL1
flg A
ts 1722270029.34053
ack:
HASH(0x6e95b88)
008002F143014E051F00
rssi:
at_CUL1:
avg -37.9565217391304
cnt 23
lst -41
max -35.5
min -41
shadowReg:
tmpl:
nb:
cnt 1
Attributes:
IOgrp VCCU1:CUL1
autoReadReg 4_reqStatus
expert rawReg
firmware 1.0
icon ring
model HM-SEN-DB-PCB
peerIDs 00000000
room HMRoom
serialNr NEQxxxxxxx
subType pushButton
Wegen 2024-07-27 17:47:36 PairedTo 0xF14301 nehme ich an, das Gerät ist ordentlich mit FHEM gepaart.
Ich habe schon ein paar Mal die folgenden Schritte unternommen:
set HM_4E051F clear msgEvents
set HM_4E051F getConfig
<Anlerntaste am Gerät drücken>Das Drücken der Anlerntaste wird mit gelb-gelb-grün am Sensor bestätigt. In FHEM bleibt der STATE aber "ResndFail".
Bei Problemen mit HomeMatic habe ich gelernt, etwas mal in HMinfo nachzuschauen:
get hminfo configCheck führt zu folgendem Ergebnis:
configCheck done:
missing register list
HM_4E051F: RegL_00.,RegL_01.
"missing register list" habe ich in der HMinfo Wiki-Seite (https://wiki.fhem.de/wiki/HMinfo) gefunden, allerdings verstehe ich die dort angegebenen Korrekturmaßnahmen nicht.
Könnte mir bitte jemand einen Tipp geben, woran es bei meinem HM-Sen-DB-PCB klemmt?
Besten Dank,
Rigge
Ich habe autoReadReg auf 5_readMissing gesetzt und warte bis morgen ab...
zeig mal die raw messages von einem getconfig mit:
attr CUL1 verbose 5
attr global mseclog 1
ausserdem je ein list von CUL1 und VCCU1.
(beim cul vorher "get version" und "get ccconf" ausführen)
fhem ist up-to-date?
Hi frank,
danke für deine Antwort.
Ich habe erst mal folgende Befehle ausgeführt:
attr CUL1 verbose 5
attr global mseclog 1
get CUL1 version
get CUL1 ccconf
Hier das list von CUL1:
Internals:
CMDS ABCFGJKRUVWXYeiltx
CUL1_MSGCNT 219
CUL1_TIME 2024-07-30 17:51:39
Clients STACKABLETS:STACKABLE:CUL_HM:CUL_IR:TSHMS
DEF /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9M9DV3R-if00-port0@38400 4301
DeviceName /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9M9DV3R-if00-port0@38400
FD 9
FHTID 4301
FUUID 5d20b025-f33f-eaf8-b1ea-5b627599907956f0
NAME CUL1
NR 199
PARTIAL
RAWMSG A1A2DA0104E051FF1430102020105000AF10B430C01140618000000::-38:CUL1:
RSSI -38
STATE Initialized
TYPE TSCUL
VERSION VTS 0.39 CSM868
VERSION_HW nanoCUL_V1.x_0014
VERSION_TS yes AES ChTblSize:209
XmitOpen 1
assignUpdCntI 18
assignedIDsCnt 9
devioNoSTATE 1
eventCount 2
initString XP0C
X21
Ar
AM5
AHF14301
msgLoadCurrent 10
owner_CCU VCCU1
MatchList:
A:CUL_HM ^A....................
B:CUL_IR ^I............
C:TSHMS ^810e04......a001
Y:STACKABLETS ^\*
Z:STACKABLE ^\*
READINGS:
2024-07-27 18:11:55 Xmit-Events ok:2 disconnected:1 non-HM:1
2024-07-30 17:55:38 ccconf freq:868.300MHz freqOffs:0.000kHz bWidth:101kHz freqIF:152.34kHz rAmpl:33dB sens:8dB dRate:9.993kBit/s
agcPrio:1 agcWait:16 agcHyst:2 agcMaxLNA:0.0dB agcMaxDVGA:1 AGC_FREEZE:0
CCAmode:3 csRelThr:10dB csAbsThr:7dB
2024-07-27 18:11:26 cmds A B C F G J K R U V W X Y e i l t x
2024-07-27 18:11:55 cond ok
2022-06-28 21:28:25 credit10ms 2700
2024-07-27 18:11:22 prot_disconnected last
2024-07-27 18:11:28 prot_non-HM last
2024-07-27 18:11:55 prot_ok last
2022-06-23 00:05:00 raw is01010101010101010101010101000000
2024-07-30 17:47:12 scF 0.998678653050834
2024-07-27 18:11:28 state Initialized
2024-07-30 17:54:14 version VTS 0.39 CSM868
helper:
CUrun 1
ChkPart 0
RA_Timeout 0
SVTS 1
VTS 1
VTS_ACK 1
VTS_AES 1
assIdCnt 9
assIdRep 9
nRec 0
recAlive 1
recd 1
DEVIOTS:
RXfailTO
HM:
ChTblSize 209
FUP 0
HMactive 1
hmCrdts 1
hmSbusy 0
ChTbl:
29CBB800 00
29CC6200 00
4E051F00 00
5C820100 00
60745900 00
72D47900 00
72D58100 00
72D58500 00
750A4D00 00
msgCNT:
0x01 219
0x02 909
0x03 8467
0x04 1
0x09 2780
unknwn:
5E0C9A:
nextSend 1722230810.88005
lRcTm:
CUL1 246941800
mcnt 10
tnms 1022666908
type 8E
AD948F:
nextSend 1722264626.54974
lRcTm:
CUL1 168164272
mcnt 10
tnms 1056482584
type 8E
ADDA63:
nextSend 1722227765.58211
lRcTm:
CUL1 222740516
mcnt 10
tnms 1019621618
type 8E
ADF1FA:
nextSend 1722354350.31538
lRcTm:
CUL1 258006784
mcnt 12
tnms 72464531
type 83
cnd:
0 2
250 1
253 1
hmLog:
IDs:
hmLogHist:
05339640 A F103 06332476 02 0B 9F A001 F14301 750A4D 010E _CCAdly:8
05339902 A F103 06332740 01 0B 9F A001 F14301 750A4D 010E _CCAdly:4
05340164 A F103 06333004 01 0B 9F A001 F14301 750A4D 010E _CCAdly:4
05340409 A F109 06333264 00 0B 9F A001 F14301 750A4D 010E _sfail _noAnsw
05355667 A F101 06348544 00 12 12 0083 ADF1FA F00001 00010CF62327064804 -99dB
05437764 A F002 06430756 00 01 C3 _ping
05532607 A F002 06525724 00 01 CC _ping
05704252 A F001 06697592 00 1A 05 8400 4E051F 000000 1000DC4E45513039353637383540010101 -36.5dB
461397 As 10 2D A001 F14301 4E051F 00040000000000
05704372 A F103 06697688 01 10 2D A001 F14301 4E051F 00040000000000 _CCAdly:4 _dhmSt:96
05704514 A F101 06697848 00 1A 06 8400 4E051F 000000 1000DC4E45513039353637383540010101 -37dB
05704650 A F103 06697956 01 10 2D A001 F14301 4E051F 00040000000000 _CCAdly:4 _dhmSt:108
05704784 A F101 06698116 00 1A 2D A010 4E051F F14301 02020105000AF10B430C01140618000000 -38dB
05704899 A F103 06698212 01 0A 2D 8002 F14301 4E051F 00 _CCAdly:4 _dhmSt:96
hmQ:
000000:
29CBB8:
29CC62:
4E051F:
5C8201:
607459:
72D479:
72D581:
72D585:
750A4D:
ids:
29CBB8:
cfg +29CBB8,00,00,00
name HM_29CBB8
29CC62:
cfg +29CC62,00,00,00
name HM_29CC62
4E051F:
cfg +4E051F,00,00,00
name HM_4E051F
5C8201:
cfg +5C8201,00,00,00
name HM_5C8201
607459:
cfg +607459,00,00,00
name HM_607459
72D479:
cfg +72D479,00,00,00
name HM_72D479
72D581:
cfg +72D581,00,00,00
name HM_72D581
72D585:
cfg +72D585,00,00,00
name HM_72D585
750A4D:
cfg +750A4D,00,00,00
name HM_750A4D
loadLvl:
bl 40
q:
ATrNo 0
HMcndN 0
InQueues 0
RQLt 0
XRpCnt 0
XRpTm 1722346850.17904
answerPend 0
hmLanQlen 1
apIDs:
29CBB8 0
29CC62 0
4E051F 0
5C8201 0
607459 0
72D479 0
72D581 0
72D585 0
750A4D 0
ref:
Sdly 28
TmBmCnt 3
ioBR 3840
ioBRMax 3722.13796427342
ioBRMean 3268.41186823288
lHMt 258355832
lSys 72813116
pTTu 1024
pndAs 0
pndCUAp 0
pndTuP 1
pngLm 14
pngRef 6
scErr 11.1831021443941
scF 0.998678653050834
scFN 21
scHT 258088996
scST 72546628
scpTm 1722354432.31819
Attributes:
alias CC1101_USB_Lite_CUL1
group IO_Devices
hmId F14301
icon cul_868
rfmode HomeMatic
room 91_Technikraum
verbose 5Und hier das list von VCCU1:
Internals:
CUL1_MSGCNT 94
CUL1_RAWMSG A12120083ADF1FAF0000100010CF62327064804::-99:CUL1:
CUL1_RSSI -99
CUL1_TIME 2024-07-30 17:45:50
DEF F14301
FUUID 62bb566e-f33f-eaf8-4d0f-09a9e346c676e2a2
IODev CUL1
LASTInputDev CUL1
MSGCNT 94
NAME VCCU1
NOTIFYDEV global
NR 1332
NTFY_ORDER 50-VCCU1
STATE CUL1:ok
TYPE CUL_HM
assignedIOs CUL1
chanNo 01
eventCount 871
READINGS:
2024-07-27 18:11:44 IODev CUL1
2024-07-30 17:52:16 IOopen 1
2024-07-29 18:44:56 cfgState ok
2023-06-09 18:27:06 commState CMDs_done
2024-07-27 17:47:35 hmPair name:HM_4E051F SN:NEQ0956785 model:HM-SEN-DB-PCB
2024-07-30 17:52:17 state CUL1:ok
2022-07-30 22:10:05 unknown_15F9FC rssi -98
2024-01-19 13:49:39 unknown_17AC96 rssi -99.5
2024-01-19 13:46:00 unknown_17F3D5 rssi -96
2022-09-28 19:36:10 unknown_18B7FB rssi -95
2024-01-14 14:25:33 unknown_1E6C0F rssi -91
2023-06-12 19:40:34 unknown_29CBB8 rssi -68.5
2023-06-24 17:50:45 unknown_29CC0E rssi -75.5
2023-06-08 19:22:24 unknown_29CC62 rssi -58
2023-06-30 07:38:57 unknown_39CD0A rssi -96
2023-12-21 15:44:22 unknown_4C1CF3 rssi -90
2024-07-27 15:04:51 unknown_4E051F rssi -40.5
2023-11-05 17:08:17 unknown_56149A rssi -98.5
2023-06-08 19:44:09 unknown_5C8201 rssi -74
2024-07-30 14:41:39 unknown_5E0C9A rssi -99.5
2023-06-09 18:17:32 unknown_607459 rssi -68
2024-03-04 13:27:25 unknown_686859 rssi -89
2023-06-12 19:54:07 unknown_6F8ADF rssi -81
2023-07-20 16:46:25 unknown_71DBE3 rssi -93.5
2023-01-17 17:47:22 unknown_72D479 rssi -69.5
2023-01-17 19:35:21 unknown_72D581 rssi -71.5
2023-01-17 19:35:23 unknown_72D585 rssi -60.5
2022-11-07 08:26:50 unknown_7938ED rssi -91.5
2022-11-07 08:26:54 unknown_793C09 rssi -86
2022-11-07 08:26:56 unknown_794681 rssi -89.5
2022-11-07 08:26:51 unknown_79469C rssi -88.5
2022-11-07 08:27:06 unknown_79498C rssi -95.5
2022-11-07 08:27:05 unknown_7949DF rssi -94
2022-11-07 08:26:56 unknown_794A62 rssi -84.5
2024-01-14 14:45:40 unknown_AD378A rssi -99.5
2024-07-29 16:50:26 unknown_AD948F rssi -99.5
2024-07-30 07:58:50 unknown_ADDA63 rssi -102.5
2024-07-30 17:45:50 unknown_ADF1FA rssi -99
2024-01-14 14:01:10 unknown_AE3DB4 rssi -99.5
2024-01-14 14:25:29 unknown_AE4AD8 rssi -94.5
2024-02-25 09:44:03 unknown_AE8039 rssi -96
2024-04-02 12:56:52 unknown_AEACBF rssi -100
2024-07-13 15:47:27 unknown_AECB8C rssi -100
2023-11-29 08:39:37 unknown_AEF2B9 rssi -101
2024-02-26 12:04:36 unknown_BDD1DA rssi -104.5
helper:
HM_CMDNR 71
peerFriend peerSD,peerSens,peerAct
peerOpt -:virtual
regLst 0
rxType 1
ack:
cmds:
TmplKey :no:1722096704.94739
TmplTs 1722096704.94739
cmdKey 1:1:1::VCCU1::01:
cmdLst:
assignHmKey noArg
assignIO -IO- [({set}|unset)]
clear [(readings|rssi|msgEvents|attack|{msgErrors}|unknownDev)]
defIgnUnknown noArg
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getDevInfo noArg
hmPairForSec [-sec-]
hmPairSerial -serial-
peerChan -btnNumber- -actChn- [({single}|dual|reverse)] [({set}|unset)] [(actor|remote|{both})]
peerSmart -peerOpt-
postEvent -condition-
press [(long|{short})] [(-peer-|{all})] [(noBurst|{Burst})] [(-repCount-|{0})] [(-repDelay-|{0.25})]
pressL [(-peer-|{all})]
pressS [(-peer-|{all})]
raw -data- [...]
reset noArg
tplSet_0 -tplChan-
unpair noArg
update noArg
virtual [(1..50;1|{1})]
lst:
condition 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159,160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175,176,177,178,179,180,181,182,183,184,185,186,187,188,189,190,191,192,193,194,195,196,197,198,199,200,201,202,203,204,205,206,207,208,209,210,211,212,213,214,215,216,217,218,219,220,221,222,223,224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239,240,241,242,243,244,245,246,247,248,249,250,251,252,253,254,255
peerOpt HM_29CBB8,HM_29CC62,HM_4E051F,HM_5C8201,HM_607459,HM_72D479,HM_72D581,HM_72D585,HM_750A4D
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
listDevice noArg
param -param-
expert:
def 1
det 0
raw 0
tpl 0
io:
prefIO
vccu VCCU1
ioList:
CUL1
mRssi:
mNo
io:
CUL1:
100
100
peerIDsH:
prt:
bErr 0
sProc 0
q:
qReqConf
qReqStat
role:
chn 1
dev 1
vrt 1
rssi:
shadowReg:
tmpl:
Attributes:
IOList CUL1
IOgrp VCCU1
alias VCCU
group IO_Devices
icon hm_ccu
model CCU-FHEM
room 91_Technikraum
subType virtual
verbose 3
webCmd virtual:updateDu hast geschrieben:
Zitatzeig mal die raw messages...
Tut mir leid, das verstehe ich nicht.
Im list vom Sensor gibt es das Attribute CUL1_RAWMSG, meinst du das?
Internals:
CUL1_MSGCNT 35
CUL1_RAWMSG A1A2FA0104E051FF1430102020105000AF10B430C01140618000000::-37.5:CUL1:
CUL1_RSSI -37.5
CUL1_TIME 2024-07-30 18:07:48
DEF 4E051F
FUUID 66a5031f-f33f-eaf8-3b52-d7d156c7630ac25e
IODev CUL1
LASTInputDev CUL1
MSGCNT 35
NAME HM_4E051F
NOTIFYDEV global
NR 1368
NTFY_ORDER 50-HM_4E051F
STATE ResndFail
TYPE CUL_HM
chanNo 01
eventCount 109
lastMsg No:2F - t:10 s:4E051F d:F14301 02020105000AF10B430C01140618000000Du hast außerdem gefragt:
Zitatfhem ist up-to-date?
Ja und auch neu gestartet.
"mseclog" und "verbose" beeinflussen den Log-Output. Deshalb nehme ich an, mit "raw messages" wolltest du das hier sehen:
2024.07.30 18:07:33.302 3: CUL_HM set HM_4E051F getConfig noArg
2024.07.30 18:07:43.724 5: CUL_Read: CUL0 /Z0CB804421927B604039C0022F01C
2024.07.30 18:07:43.725 4: CUL_Parse: CUL0 Z0CB804421927B604039C0022F01C -60
2024.07.30 18:07:43.726 5: CUL0: dispatch Z0CB804421927B604039C0022F0
2024.07.30 18:07:43.769 5: CUL_Read: CUL0 /Z0EB8020204039C1927B600011900220D
2024.07.30 18:07:43.770 4: CUL_Parse: CUL0 Z0EB8020204039C1927B600011900220D -67.5
2024.07.30 18:07:43.771 5: CUL0: dispatch Z0EB8020204039C1927B60001190022
2024.07.30 18:07:47.897 5: TSCUL_Read CUL1: /AF00103DD403A001A0784004E
2024.07.30 18:07:47.913 5: TSCUL_Read CUL1: AF00103DD403A001A0784004E/051F0000001000DC4E455130393536373835400101014D
2024.07.30 18:07:47.914 4: TSCUL_Parse: CUL1 06673334 A F001 07667944 00 1A 07 8400 4E051F 000000 1000DC4E45513039353637383540010101 -35.5dB
2024.07.30 18:07:47.916 5: CUL1: dispatch A1A0784004E051F0000001000DC4E45513039353637383540010101::-35.5:CUL1:
2024.07.30 18:07:47.918 3: CUL_HM received config CCU:VCCU1 device: HM_4E051F. PairForSec: off
2024.07.30 18:07:47.920 4: TSCUL_Write: CUL1 sending As102FA001F143014E051F00040000000000
2024.07.30 18:07:47.921 4: TSCUL_send: CUL1 381905 As 10 2F A001 F14301 4E051F 00040000000000
2024.07.30 18:07:47.921 4: TSCUL_XmitDlyHM: CUL1 id:4E051F rtoms:2259
2024.07.30 18:07:47.946 5: TSCUL_Read CUL1: /A
2024.07.30 18:07:48.011 5: TSCUL_Read CUL1: /AF10303DD4
2024.07.30 18:07:48.028 5: TSCUL_Read CUL1: AF10303DD4/05201102FA001F143014E051F0004000000000080
2024.07.30 18:07:48.029 4: TSCUL_Parse: CUL1 06673454 A F103 07668040 01 10 2F A001 F14301 4E051F 00040000000000 _CCAdly:4 _dhmSt:96
2024.07.30 18:07:48.159 5: TSCUL_Read CUL1: /AF10103DD407A001A0884004E051F0000001000DC4E4551303935363
2024.07.30 18:07:48.175 5: TSCUL_Read CUL1: AF10103DD407A001A0884004E051F0000001000DC4E4551303935363/73835400101014B
2024.07.30 18:07:48.176 4: TSCUL_Parse: CUL1 06673596 A F101 07668200 00 1A 08 8400 4E051F 000000 1000DC4E45513039353637383540010101 -36.5dB
2024.07.30 18:07:48.177 5: CUL1: dispatch A1A0884004E051F0000001000DC4E45513039353637383540010101::-36.5:CUL1:
2024.07.30 18:07:48.180 3: CUL_HM received config CCU:VCCU1 device: HM_4E051F. PairForSec: off
2024.07.30 18:07:48.289 5: TSCUL_Read CUL1: /AF10303DD409501102FA001F143014E051F00040000000000
2024.07.30 18:07:48.306 5: TSCUL_Read CUL1: AF10303DD409501102FA001F143014E051F00040000000000/80
2024.07.30 18:07:48.307 4: TSCUL_Parse: CUL1 06673732 A F103 07668308 01 10 2F A001 F14301 4E051F 00040000000000 _CCAdly:4 _dhmSt:108
2024.07.30 18:07:48.421 5: TSCUL_Read CUL1: /AF10103DD40BD001A2FA0104E051FF14301
2024.07.30 18:07:48.446 5: TSCUL_Read CUL1: AF10103DD40BD001A2FA0104E051FF14301/02020105000AF10B430C0114061800000049
2024.07.30 18:07:48.448 4: TSCUL_Parse: CUL1 06673867 A F101 07668468 00 1A 2F A010 4E051F F14301 02020105000AF10B430C01140618000000 -37.5dB
2024.07.30 18:07:48.449 5: CUL1: dispatch A1A2FA0104E051FF1430102020105000AF10B430C01140618000000::-37.5:CUL1:
2024.07.30 18:07:48.452 4: TSCUL_Write: CUL1 sending As0A2F8002F143014E051F00
2024.07.30 18:07:48.535 5: TSCUL_Read CUL1: /AF10303DD40D5010A2F8002F143014E
2024.07.30 18:07:48.551 5: TSCUL_Read CUL1: AF10303DD40D5010A2F8002F143014E/051F0080
2024.07.30 18:07:48.553 4: TSCUL_Parse: CUL1 06673981 A F103 07668564 01 0A 2F 8002 F14301 4E051F 00 _CCAdly:4 _dhmSt:96
2024.07.30 18:08:47.810 5: TSCUL_Read CUL1: /AF00203DD7AD10001CC80
2024.07.30 18:08:47.812 4: TSCUL_Parse: CUL1 06733245 A F002 07727940 00 01 CC _ping
In https://forum.fhem.de/index.php?topic=55244.13 hatte jemand eine ähnliche Fehlermeldung.
Die Lösung war dann:
ZitatDer Reset auf die Werkseinstellungen hats gebracht
Diese Befehle würde ich dann mal die Tage probieren:
set HM_4E051F reset
set CUL1 hmPairForSec 60
<Knöpfchen am Sensor drücken>
device löschen und/oder resetten ist wie fast immer auch in deinem fall kontraproduktiv!
das device ist gepairt und tut was es soll.
allerdings sieht man im log nur das erfolgreiche pollen von registerliste 0.
1. zeige ein aktuelles "get HM_4E051F list full".
normalerweise sollten weitere cmds folgen.
2. gab es keine weiteren pending cmds?
3. warum hast du das knöpfchen 2x gedrückt?
du benutzt tsculfw 0.39 von @noansi
4. welche moduldateien nutzt du? zeige die ausgabe vom fhem cmd "version".
edit:
die rssi sind extrem gut. abstand zwischen cul und device nicht zu dicht. 2m sollte optimal sein.
Zitat1. zeige ein aktuelles "get HM_4E051F list full"
Das sieht dann so aus:
Internals:
.triggerUsed 1
CUL1_MSGCNT 38
CUL1_RAWMSG A1A31A0104E051FF1430102020105000AF10B430C01140618000000::-37:CUL1:
CUL1_RSSI -37
CUL1_TIME 2024-07-31 19:02:54
DEF 4E051F
FUUID 66a5031f-f33f-eaf8-3b52-d7d156c7630ac25e
IODev CUL1
LASTInputDev CUL1
MSGCNT 38
NAME HM_4E051F
NOTIFYDEV global
NR 1368
NTFY_ORDER 50-HM_4E051F
STATE ResndFail
TYPE CUL_HM
chanNo 01
eventCount 119
lastMsg No:31 - t:10 s:4E051F d:F14301 02020105000AF10B430C01140618000000
protCmdDel 15
protLastRcv 2024-07-31 19:02:54
protRcv 34 last_at:2024-07-31 19:02:54
protResndFail 5 last_at:2024-07-31 19:02:54
protSnd 21 last_at:2024-07-31 19:02:54
rssi_at_CUL1 cnt:38 min:-41 max:-35.5 avg:-37.55 lst:-37
.attraggr:
.attrminint:
CL:
Authenticated 0
BUF
FD 35
FW_ID 1722445445.12278
LASTACCESS 1722445455.06821
NAME WEB_192.168.xxx.xxx_51315
NR 10008877
PEER 192.168.xxx.xxx
PORT 51315
SNAME WEB
SSL
STATE Connected
TEMPORARY 1
TYPE FHEMWEB
canAsyncOutput 1
encoding UTF-8
.attraggr:
.attrminint:
READINGS:
2024-07-31 19:04:05 state Connected
READINGS:
2024-07-31 19:02:54 .D-devInfo 010101
2024-07-31 19:02:54 .D-stc 40
2024-07-27 18:15:37 .R-ledMode set_on
2024-07-27 17:47:36 .R-longPress 0.4 s
2024-07-27 17:47:36 .R-pairCentral 0xF14301
2024-07-27 17:47:36 .R-sign off
2024-07-27 18:11:55 .associatedWith HM_4E051F
2024-07-27 17:47:36 .peerListRDate 2024-07-27 17:47:36
2024-07-31 19:02:54 .protLastRcv 20240731190254
2024-07-27 18:16:55 CommandAccepted yes
2024-07-31 19:02:54 D-firmware 1.0
2024-07-31 19:02:54 D-serialNr NEQ0956785
2024-07-27 17:47:36 PairedTo 0xF14301
2024-07-29 18:20:29 alive yes
2024-07-29 18:20:29 battery ok
2024-07-31 19:02:39 cfgState updating
2024-07-31 19:02:54 commState CMDs_done
2024-07-29 18:20:29 powerOn 2024-07-29 18:20:29
2024-07-29 18:20:29 recentStateType info
2024-07-31 19:02:54 state ResndFail
RegL_00.:
VAL
helper:
HM_CMDNR 49
PONtest 1
cSnd
cfgChkResult No regs found for:HM_4E051F-ret--ret-
getCfgList all
getCfgListNo ,4
lastMsgTm 1722445374.45429
mId 00DC
peerFriend peerAct,peerVirt
peerIDsState complete
peerOpt 4:pushButton
regLst 0,1,4p
rxType 4
supp_Pair_Rep 0
cfgChk:
idRc01 RegL_00.,RegL_01.
cmds:
TmplKey :no:1722096704.64462
TmplTs 1722096704.64462
cmdKey 1:1:0::HM_4E051F:00DC:01:
cmdLst:
assignHmKey noArg
clear [(readings|trigger|register|oldRegs|rssi|msgEvents|{msgErrors}|attack|all)]
deviceRename -newName-
fwUpdate -filename- [-bootTime-]
getConfig noArg
getDevInfo noArg
getRegRaw (List0|List1|List2|List3|List4|List5|List6|List7) [-peerChn-]
peerBulk -peer1,peer2,...- [({set}|unset)]
peerChan -btnNumber- -actChn- [({single}|dual|reverse)] [({set}|unset)] [(actor|remote|{both})]
peerSmart -peerOpt-
raw -data- [...]
regBulk -list-.-peerChn- -addr1:data1- [-addr2:data2-]...
regSet [(prep|{exec})] -regName- -value- [-peerChn-]
reset noArg
sign [(on|{off})]
tplDel -tplDel-
tplSet_0 -tplChan-
trgEventL -peer- -condition-
trgEventS -peer- -condition-
trgPressL [(-peer-|{all})]
trgPressS [(-peer-|{all})]
unpair noArg
lst:
condition 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159,160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175,176,177,178,179,180,181,182,183,184,185,186,187,188,189,190,191,192,193,194,195,196,197,198,199,200,201,202,203,204,205,206,207,208,209,210,211,212,213,214,215,216,217,218,219,220,221,222,223,224,225,226,227,228,229,230,231,232,233,234,235,236,237,238,239,240,241,242,243,244,245,246,247,248,249,250,251,252,253,254,255
peerOpt HM_29CBB8,HM_29CC62,HM_5C8201,HM_607459,HM_72D479,HM_72D581,HM_72D585,HM_750A4D,VCCU1
tplChan
tplDel
tplPeer
rtrvLst:
cmdList [({short}|long)]
deviceInfo [({short}|long)]
list [({normal}|full)]
param -param-
reg -addr- -list- [-peerChn-]
regList noArg
regTable noArg
regVal -addr- -list- [-peerChn-]
saveConfig [-filename-]
tplInfo noArg
expert:
def 0
det 0
raw 1
tpl 0
io:
flgs 0
newChn +4E051F,00,00,00
nextSend 1722445374.71467
rxt 0
vccu VCCU1
lRcTm:
CUL1 349149992
mcnt 31
tnms 163488734
type 10
p:
4E051F
00
00
00
prefIO:
CUL1
mRssi:
mNo 31
io:
CUL1:
-27
-27
peerIDsH:
00000000 broadcast
prt:
bErr 0
sProc 0
rspWait:
q:
qReqConf
qReqStat
role:
chn 1
dev 1
rpt:
IO CUL1
flg A
ts 1722445374.45429
ack:
HASH(0x6e95b88)
318002F143014E051F00
rssi:
at_CUL1:
avg -37.5526315789474
cnt 38
lst -37
max -35.5
min -41
shadowReg:
tmpl:
nb:
cnt 1
Attributes:
.mId 00DC
IOgrp VCCU1:CUL1
alias Haustürklingel
autoReadReg 4_reqStatus
expert rawReg
firmware 1.0
icon ring
model HM-SEN-DB-PCB
peerIDs 00000000
room 01_Eingangsbereich,02_Flur
serialNr NEQ0956785
subType pushButtonZitat2. gab es keine weiteren pending cmds?
Ich habe den Vorgang von gestern Abend unter gleichen Bedingungen (attr CUL1 verbose 5, attr global mseclog 1) wiederholt. Hier der Log-Output für den regexp "CUL1|VCCU1|HM_4E051F":
2024-07-31 19:02:39.728 CUL_HM HM_4E051F commState: CMDs_pending
2024-07-31 19:02:39.734 CUL_HM HM_4E051F cfgState: updating
2024-07-31 19:02:39.741 CUL_HM HM_4E051F cfgState: updating
2024-07-31 19:02:39.747 CUL_HM HM_4E051F commState: CMDs_pending
2024-07-31 19:02:39.753 CUL_HM HM_4E051F commState: CMDs_pending
2024-07-31 19:02:51.553 CUL_HM VCCU1 IOopen: 1
2024-07-31 19:02:51.646 CUL_HM VCCU1 CUL1:ok
2024-07-31 19:02:54.010 CUL_HM HM_4E051F D-firmware: 1.0
2024-07-31 19:02:54.010 CUL_HM HM_4E051F D-serialNr: NEQ0956785
2024-07-31 19:02:54.010 CUL_HM HM_4E051F commState: CMDs_processing...
2024-07-31 19:02:54.245 CUL_HM HM_4E051F D-firmware: 1.0
2024-07-31 19:02:54.245 CUL_HM HM_4E051F D-serialNr: NEQ0956785
2024-07-31 19:02:54.245 CUL_HM HM_4E051F commState: CMDs_done_Errors:1
2024-07-31 19:02:54.343 CUL_HM HM_4E051F RESPONSE TIMEOUT:RegisterRead
2024-07-31 19:02:54.442 CUL_HM HM_4E051F ResndFail
2024-07-31 19:02:54.524 CUL_HM HM_4E051F commState: CMDs_doneZitat3. warum hast du das knöpfchen 2x gedrückt?
Ich habe den Zyklus "clear msgEvents, getConfig, Knöpfchen drücken" gestern Abend zweimal wiederholt. Habe ich heute nicht gemacht.
Zitat4. welche moduldateien nutzt du? zeige die ausgabe vom fhem cmd "version".
Das dürften die relevanten Module sein:
97_timerTS.pm
00_TSCUL.pm
DevIoTS.pm
Hier ist die vollständige "version"-Ausgabe:
Latest Revision: 29043
File Rev Last Change
fhem.pl 28849 2024-05-07 08:54:34Z rudolfkoenig
57_ABFALL.pm 11023 2018-06-13 12:34:34Z uniqueck
90_at.pm 28711 2024-03-27 11:25:38Z rudolfkoenig
# $Id: 98_autocreate.pm 23727a 2021-02-13 13:00:00Z noansi $
98_backup.pm 24332 2021-04-25 08:55:00Z CoolTux
70_BRAVIA.pm 27771 2023-07-16 16:04:59Z vuffiraa
57_Calendar.pm 26344 2022-08-22 15:06:57Z neubert
57_CALVIEW.pm 17605 2018-10-23 16:37:40Z chris1284
98_cmdalias.pm 16300 2018-03-01 08:48:21Z rudolfkoenig
00_CUL.pm 24815 2021-08-01 16:14:02Z rudolfkoenig
# $Id: 10_CUL_HM.pm 24374o 2021-07-28 18:16:52Z noansi $
14_CUL_MAX.pm 22175 2020-06-13 17:32:49Z Wzut
98_DOIF.pm 28546 2024-02-23 20:11:05Z Damian
98_dummy.pm 25606 2022-02-01 10:43:57Z rudolfkoenig
70_ENIGMA2.pm 18995 2019-03-22 20:09:53Z loredo
91_eventTypes.pm 23471 2021-01-04 19:24:21Z rudolfkoenig
72_FB_CALLLIST.pm 25271 2021-11-28 09:40:15Z markusbloch
72_FB_CALLMONITOR.pm 28165 2023-11-14 13:38:31Z jowiemann
01_FHEMWEB.pm 28809 2024-04-19 19:32:58Z rudolfkoenig
92_FileLog.pm 28451 2024-01-31 22:05:20Z rudolfkoenig
95_FLOORPLAN.pm 13735 2017-03-19 12:43:53Z UliM
72_FRITZBOX.pm 28995 2024-06-21 07:42:29Z jowiemann
98_help.pm 27491 2023-04-27 17:22:30Z betateilchen
14_Hideki.pm 26983 2023-01-16 12:19:44Z HomeAutoUser
# $Id: 98_HMinfo.pm 24321h 2022-03-23 20:00:00Z noansi $
95_holiday.pm 25187 2021-11-06 09:54:35Z rudolfkoenig
02_HTTPSRV.pm 20110 2019-09-05 17:30:20Z neubert
10_IT.pm 18090 2018-12-30 07:24:59Z bjoernh
98_JsonList2.pm 26701 2022-11-14 09:51:02Z rudolfkoenig
32_mailcheck.pm 16299 2018-03-01 08:06:55Z justme1968
10_MAX.pm 23517 2021-01-13 15:38:49Z Wzut
75_msgConfig.pm 26965 2023-01-05 06:32:17Z CoolTux
No Id found for 99_myBMWUtilsPersonal.pm
No Id found for 99_myUtilsPerlInfo.pm
99_myUtilsTelefon.pm 1932 2012-10-06 20:15:33Z ulimaass
38_netatmo.pm 29001 2024-06-26 20:45:35Z moises
77_Nina.pm 17646 2020-01-21 11:20:16Z K�lnsolar
91_notify.pm 28610 2024-03-07 09:53:25Z rudolfkoenig
41_OREGON.pm 26978 2023-01-28 15:26:11Z elektron-bbs
73_PRESENCE.pm 28940 2024-06-03 07:29:41Z jowiemann
70_Pushbullet.pm 9730 2015-10-30 15:06:41Z fhainz
33_readingsGroup.pm 23844 2021-02-27 19:43:24Z justme1968
10_RESIDENTS.pm 19533 2019-06-02 19:33:11Z loredo
20_ROOMMATE.pm 19533 2019-06-02 19:33:11Z loredo
14_SD_BELL.pm 0 2022-12-29 23:35:50Z sidey79
10_SD_GT.pm 27957 2024-01-03 12:07:45Z sidey79
14_SD_RSL.pm 20671 2019-12-06 20:43:40Z Sidey
14_SD_UT.pm 0 2024-07-21 12:54:08Z elektron-bbs
14_SD_WS.pm 26982 2024-06-19 18:49:10Z elektron-bbs
# $Id: 00_SIGNALduino.pm 3.5.6 2024-04-24 06:21:19Z HomeAutoUser $
90_SIGNALduino_un.pm 20749 2019-12-14 22:35:00Z Sidey
96_SIP.pm 21469 2020-03-21 19:30:58Z Wzut
98_structure.pm 28671 2024-03-17 09:11:16Z rudolfkoenig
99_SUNRISE_EL.pm 24249 2021-04-14 05:45:49Z rudolfkoenig
98_SVG.pm 28771 2024-04-08 09:45:00Z rudolfkoenig
32_SYSSTAT.pm 24779 2021-07-20 09:21:08Z justme1968
98_telnet.pm 25754 2022-02-27 16:49:52Z rudolfkoenig
98_Text2Speech.pm 29035 2024-07-21 14:17:28Z Tobias.Faust
97_timerTS.pm 14 2021-07-09 00:00:00Z noansi
45_TRX.pm 20807 2019-12-22 15:35:25Z KernSani
46_TRX_ELSE.pm 16542 2018-04-02 22:10:20Z KernSani
46_TRX_LIGHT.pm 21770 2020-04-24 20:20:40Z KernSani
46_TRX_WEATHER.pm 28295 2023-12-19 19:48:23Z KernSani
00_TSCUL.pm 138 2021-08-04 18:00:00Z noansi
59_Twilight.pm 25067 2021-10-13 04:26:30Z Beta-User
98_update.pm 28697 2024-03-22 10:14:54Z rudolfkoenig
99_Utils.pm 28529 2024-02-18 11:42:21Z rudolfkoenig
77_UWZ.pm 25306 2021-12-06 05:27:48Z CoolTux
98_version.pm 26611 2022-10-28 16:32:29Z betateilchen
91_watchdog.pm 26108 2022-06-01 08:25:03Z rudolfkoenig
59_Weather.pm 27146 2023-01-29 15:27:02Z CoolTux
98_weblink.pm 26988 2023-01-07 09:18:42Z rudolfkoenig
ABFALL_getEvents.pm 11023 2018-06-13 12:34:34Z uniqueck
ABFALL_setUpdate.pm 11021 2017-09-13 00:32:22Z uniqueck
AttrTemplate.pm 27145 2023-01-29 11:48:19Z rudolfkoenig
Blocking.pm 23268 2020-12-01 11:48:48Z rudolfkoenig
Color.pm 20813 2019-12-22 18:42:10Z justme1968
DevIo.pm 27247 2023-02-18 21:22:32Z rudolfkoenig
DevIoTS.pm 35 2021-07-10 00:00:00Z noansi
FritzBoxUtils.pm 23727 2021-02-12 20:31:37Z rudolfkoenig
GPUtils.pm 19666 2019-06-20 11:17:29Z CoolTux
# $Id: HMConfig.pm 24773a 2021-07-19 20:00:00Z noansi $
HttpUtils.pm 28894 2024-05-21 09:00:43Z rudolfkoenig
Meta.pm 26889 2022-12-23 15:04:11Z CoolTux
msgSchema.pm 26965 2023-01-05 06:32:17Z CoolTux
myUtilsTemplate.pm 7570 2015-01-14 18:31:44Z rudolfkoenig
myUtilsTemplate.pm 7570 2015-01-14 18:31:44Z rudolfkoenig
myUtilsTemplate.pm 7570 2015-01-14 18:31:44Z rudolfkoenig
ReadingUtil.pm 11 2021-06-22 08:51:47Z noansi
RESIDENTStk.pm 19788 2019-07-06 08:10:55Z loredo
RTypes.pm 10476 2016-01-12 21:03:33Z borisneubert
SD_Protocols.pm 26975 2024-01-06 16:07:53Z elektron-bbs
SetExtensions.pm 25286 2021-12-03 10:16:56Z rudolfkoenig
SubProcess.pm 14334 2017-05-20 23:11:06Z neubert
TcpServerUtils.pm 28227 2023-11-29 12:33:32Z rudolfkoenig
UConv.pm 21159 2020-02-09 14:04:27Z loredo
Unit.pm 19614 2019-06-13 23:11:25Z loredo
doif.js 24438 2021-05-14 18:08:18Z Ellert
f18.js 28896 2024-05-22 09:01:58Z rudolfkoenig
fhemweb.js 28198 2023-11-22 16:22:22Z rudolfkoenig
fhemweb_readingsGroup.js 15189 2017-10-03 17:53:27Z justme1968
Zitat von: fhemRigge am 31 Juli 2024, 19:23:03Ich habe den Vorgang von gestern Abend unter gleichen Bedingungen (attr CUL1 verbose 5, attr global mseclog 1) wiederholt. Hier der Log-Output für den regexp "CUL1|VCCU1|HM_4E051F":
1. das ist das falsche log.
aussagekräftig sind nur die
raw messages aus fhem.log wie im post #4. (verbose=4 am cul sollte genügen)
2. die doppelten anlernmessages beim knöpfchen drücken sind scheinbar "normal" bei dem klingelsensor, da sie auch bei anderen usern zu sehen sind.
Zitat von: fhemRigge am 31 Juli 2024, 19:23:03Das dürften die relevanten Module sein:
97_timerTS.pm
00_TSCUL.pm
DevIoTS.pm (https://deviots.pm/)
und mindestens noch 98_HMinfo.pm, 10_CUL_HM.pm und HMConfig.pm
3. aktuell sind sie aber nicht, da es mindestens schon tsculfw 0.40 gibt.
################# neuer versuch
falls noch nicht geschehen, jetzt sniffen der raw messages einschalten
4. zeig mal den cmdstack von einem getconfig bevor du aufs knöpfchen drückst (findest du im list nach den readings).
so sieht es bei meinem fensterkontakt aus. 3 befehle warten aufs abholen.
cmdStack:
++A0011ACE1F1DE62000040000000000
##A0011ACE1F1DE62001040000000001
##A0011ACE1F1DE62001035. anschliessend einmal aufs knöpfchen drücken und dann erneut den cmdstack posten.
6. solange etwas im cmdstack zu sehen ist, zurück zu punkt 5.
7. wenn der cmdstack leer ist, das log mit dem sniff und ein aktuelles "get list full" posten.