Hallo zusammen,
seit folgender Änderung https://github.com/mhop/fhem-mirror/commit/cb7fd4982b0cf43c23ae98af51e3b853e4874b37 bekomme ich Fehlermeldungen beim Verarbeiten der Sensordaten meiner BRESSER_7-in-1_Wetterstation:
2026.06.08 15:58:09 4: nanoCUL_868MHz: Read, msg: MN;D=372FB2BEBC8A18AAAAAAAAAAAAAA8B8ACEAAAA9FAAAA;R=58;A=4;
2026.06.08 15:58:09 4: nanoCUL_868MHz: Parse_MN, Error! id 117 msg=372FB2BEBC8A18AAAAAAAAAAAAAA8B8ACEAAAA9FAAAA, message is to short
Mit der 2.07 (anstatt 2.09) läuft es, die dazu passende SD_ProtocolData.pm vorausgesetzt:
Internals:
CODE SD_WS_117
DEF SD_WS_117
FUUID 64f43401-f33f-49f8-8899-cb8c3ca745098f0e
FVERSION 14_SD_WS.pm:v1.1.7-s30748/2026-01-17
LASTInputDev nanoCUL_868MHz
MSGCNT 190
NAME SD_WS_117
NR 277
STATE T: 21.3 H: 64 W: 0 R: 0 B: 0.103
TYPE SD_WS
bitMSG 01001010101100000001100000010100000101100010000010110010000000000000000000000000000000000000000000000000000000000010000100110000011001000000000000000001000000110000000000000000
eventCount 42
lastMSG 4AB018141620B2000000000000002130640001030000
lastReceive 1780930327.39694
nanoCUL_868MHz_DMSG W117#4AB018141620B2000000000000002130640001030000
nanoCUL_868MHz_FREQAFC 6
nanoCUL_868MHz_MSGCNT 190
nanoCUL_868MHz_Protocol_ID 117
nanoCUL_868MHz_RAWMSG MN;D=E01AB2BEBC8A18AAAAAAAAAAAAAA8B9ACEAAABA9AAAA;R=58;A=4;
nanoCUL_868MHz_RSSI -45
nanoCUL_868MHz_TIME 2026-06-08 16:52:07
READINGS:
2026-01-27 16:11:37 batteryChanged 1
2026-06-08 16:52:07 batteryState ok
2026-06-08 16:52:07 brightness 0.103
2026-06-08 16:52:07 humidity 64
2026-06-08 16:10:09 model Bresser 7-in-1 outdoor sensor
2026-06-08 16:52:07 rain 0
:
:
: