FHEM Forum

Hallo,
gestern mein erster Homatic HK thermosstat nach ein paar Elros eingetroffen.
Versuche den hm-cc-rt-dn zu pairen aber irgendwie klappt es nicht.
Auch im Wiki wurde ich nicht schlauer.
Nach dem set CUL1 hmPairForSec 30 und drücken der entspechenden hm-cc-rt-dn Taste
werden die Einträge in die Config übernommen. Dann noch ein save config.
Es werden aber keine Werte in der Obewrfläche angezeigt.

• fhem.cf
  attr CUL_HM_HM_CC_RT_DN_23B6EB serialNr KEQ0722003
  attr CUL_HM_HM_CC_RT_DN_23B6EB subType thermostat
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_Weather CUL_HM 23B6EB01
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Weather expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Weather model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Weather peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Weather room CUL_HM
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Weather FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_Weather-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_Weather
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Weather logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Weather room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_Climate CUL_HM 23B6EB02
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Climate expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Climate model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Climate peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_Climate room CUL_HM
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Climate FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_Climate-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_Climate
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Climate logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Climate room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec CUL_HM 23B6EB03
  attr CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec room CUL_HM
  attr CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec stateFormat last:trigLast
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr CUL_HM 23B6EB04
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr room CUL_HM
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam CUL_HM 23B6EB05
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam room CUL_HM
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam room CUL_HM
  define CUL_HM_HM_CC_RT_DN_23B6EB_remote CUL_HM 23B6EB06
  attr CUL_HM_HM_CC_RT_DN_23B6EB_remote expert
  attr CUL_HM_HM_CC_RT_DN_23B6EB_remote model HM-CC-RT-DN
  attr CUL_HM_HM_CC_RT_DN_23B6EB_remote peerIDs
  attr CUL_HM_HM_CC_RT_DN_23B6EB_remote room CUL_HM
  define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_remote FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_remote-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_remote
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_remote logtype text
  attr FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_remote room CUL_HM
  define ActionDetector CUL_HM 000000
  attr ActionDetector actCycle 600
  attr ActionDetector event-on-change-reading .*
  attr ActionDetector room CUL_HM
  define FileLog_ActionDetector FileLog ./log/ActionDetector-%Y.log ActionDetector
  attr FileLog_ActionDetector logtype text
  attr FileLog_ActionDetector room CUL_HM
  
  Logfile
  2014.01.26 11:37:54 3: CUL_HM Unknown device CUL_HM_HM_CC_RT_DN_23B6EB, please define it
  2014.01.26 11:37:54 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB CUL_HM 23B6EB A1A01840023B6EB0000001100954B4551303732323030335900FFFF
  2014.01.26 11:37:54 3: Device CUL_HM_HM_CC_RT_DN_23B6EB added to ActionDetector with 000:10 time
  2014.01.26 11:37:54 3: CUL_HM pair: CUL_HM_HM_CC_RT_DN_23B6EB thermostat, model HM-CC-RT-DN serialNr KEQ0722003
  2014.01.26 11:37:54 3: CUL1 pairing (hmPairForSec) not enabled
  2014.01.26 11:37:54 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB
  2014.01.26 11:37:55 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_Weather CUL_HM 23B6EB01
  2014.01.26 11:37:55 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Weather FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_Weather-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_Weather
  2014.01.26 11:37:56 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_Climate CUL_HM 23B6EB02
  2014.01.26 11:37:56 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_Climate FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_Climate-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_Climate
  2014.01.26 11:37:57 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec CUL_HM 23B6EB03
  2014.01.26 11:37:57 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_WindowRec
  2014.01.26 11:37:58 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr CUL_HM 23B6EB04
  2014.01.26 11:37:58 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_ClimRT_tr
  2014.01.26 11:37:59 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam CUL_HM 23B6EB05
  2014.01.26 11:37:59 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_ClimaTeam
  2014.01.26 11:38:00 2: autocreate: define CUL_HM_HM_CC_RT_DN_23B6EB_remote CUL_HM 23B6EB06
  2014.01.26 11:38:00 2: autocreate: define FileLog_CUL_HM_HM_CC_RT_DN_23B6EB_remote FileLog ./log/CUL_HM_HM_CC_RT_DN_23B6EB_remote-%Y.log CUL_HM_HM_CC_RT_DN_23B6EB_remote
  2014.01.26 11:38:05 2: autocreate: define ActionDetector CUL_HM 000000
  2014.01.26 11:38:05 2: autocreate: define FileLog_ActionDetector FileLog ./log/ActionDetector-%Y.log ActionDetector
  2014.01.26 11:38:05 3: Device CUL_HM_HM_CC_RT_DN_23B6EB added to ActionDetector with 000:10 time
  2014.01.26 11:41:12 1: Including fhem.cfg
  

Ist der HM_HM_CC_RT_DN nun gepairt?
cu erwin23

Zitat2014.01.26 11:37:54 3: CUL1 pairing (hmPairForSec) not enabled

NÖ

Hallo,
und was kann ich jetzt tun?
Habe bestimmt schon 10 mal versucht zu pairen.
cu erwin23

und wie hast du es gemacht? Beschreiben und roh-message aufzeichnen
http://forum.fhem.de/index.php/topic,16563.0.html

Hallo Martin,
erst set CUL1 hmPairForSec 600
dann am HM_HM_CC_RT_DN in den Pairingmode, der HM_HM_CC_RT_DN meldet dann AC,
der HM_HM_CC_RT_DN steht in der fhem.cfg
Hier die Logs
2014-01-26_20:11:00 CUL_HM_HM_CC_RT_DN_23B6EB Activity: alive
2014-01-26_20:11:18 CUL_HM_HM_CC_RT_DN_23B6EB powerOn: -
2014-01-26_20:14:44 CUL_HM_HM_CC_RT_DN_23B6EB Activity: alive
2014-01-26_20:15:03 CUL_HM_HM_CC_RT_DN_23B6EB time-request: -
2014-01-26_20:15:41 CUL_HM_HM_CC_RT_DN_23B6EB battery: ok
2014-01-26_20:15:41 CUL_HM_HM_CC_RT_DN_23B6EB batteryLevel: 3.1 V
2014-01-26_20:15:41 CUL_HM_HM_CC_RT_DN_23B6EB measured-temp: 25.3
2014-01-26_20:15:41 CUL_HM_HM_CC_RT_DN_23B6EB desired-temp: 21
2014-01-26_20:15:41 CUL_HM_HM_CC_RT_DN_23B6EB actuator: 87 %
und was mus ich noch was tun.
cu erwin23

Hi erwin23
nun, sieht nicht schlecht aus - aber jetzt prüfen:
-  sind die Register schon gelesen? Wenn nicht mache ein getConfig - warte bis es abgeholt wird (oder drücke kurz anlernen, kein reset!)
- steht in R-pairCentral die ID des HMLAN?

dann ist pairen komplett, wenn nicht, alles noch mal, diesmal mit messages aufzeichnen wie angesprochen

Gruss Martin

Hallo Martin,
habe bei mir
attr global verbose 1
attr global mseclog 1
attr CUL1 verbose 4                  eingetragen.
Stehen die Roh-Daten dann als CUL_HM_HM_CC_RT_DN_23B6EB Logiles bei den Logfiles.
Lese ich nicht aus deinem Link.
Beste Grüsse erwin23

im globalen logfile