Hallo Kollegas vom FHEM,
nach einem Update in den letzten Tagen will der Notify nicht mehr :-(
Im Bad und in der Dusche habe ich die gleiche Grundkonfig aus HM-CC-RT-DN und HM-LC-Sw1PBU-FM
Self02 vom Schalter auf On for 60 Minuten programmiert (wie oft war in der Vergangenheit schon das Liht an ...)
Thermostat auf 18 Grad
Noty auf Schater On um desired auf 21.5 zu setzen
Hier die NICHT funktionierende Config:
Internals:
CHANGED
DEF 222F43
IODev hm.lan.1
LASTInputDev hm.lan.1
MSGCNT 306
NAME hm.thermo.1
NR 340
STATE CMDs_done
TYPE CUL_HM
channel_01 hm.thermo.1.weather
channel_02 hm.thermo.1.climate
channel_03 hm.thermo.1.windowrec
channel_04 hm.thermo.1.clima
channel_05 hm.thermo.1.climateam
channel_06 hm.thermo.1.remote
hm.lan.1_MSGCNT 306
hm.lan.1_RAWMSG E222F43,0000,0269371B,FF,FFB3,CD8610222F430000000A90D40E0004
hm.lan.1_RSSI -77
hm.lan.1_TIME 2014-02-26 20:25:48
lastMsg No:CD - t:10 s:222F43 d:000000 0A90D40E0004
protEvt_AESok 4 last_at:2014-02-26 20:00:45
protLastRcv 2014-02-26 20:25:48
protResnd 5 last_at:2014-02-26 09:26:57
protSnd 44 last_at:2014-02-26 20:23:16
protState CMDs_done
rssi_at_hm.lan.1 avg:-75.44 min:-87 max:-66 lst:-77 cnt:306
CHANGETIME:
Helper:
Dblog:
Activity:
Mydblog:
TIME 1393403044.00551
VALUE alive
Aeskeynbr:
Mydblog:
TIME 1393408510.67076
VALUE FF
Measured-temp:
Mydblog:
TIME 1393442592.17716
VALUE 21.2
Readings:
2014-02-26 17:17:45 Activity alive
2014-02-26 20:00:45 CommandAccepted yes
2014-02-26 17:17:45 D-firmware 1.0
2014-02-26 17:17:45 D-serialNr KEQ0517096
2014-02-24 09:32:23 PairedTo 0x4F7315
2014-02-24 09:32:23 R-backOnTime 10 s
2014-02-24 09:32:23 R-btnLock off
2014-02-24 09:32:23 R-burstRx off
2014-02-24 09:32:23 R-cyclicInfoMsg on
2014-02-24 09:32:23 R-cyclicInfoMsgDis 0
2014-02-24 09:32:23 R-globalBtnLock off
2014-02-24 09:32:23 R-localResDis off
2014-02-24 09:32:23 R-lowBatLimitRT 2.1 V
2014-02-24 09:32:23 R-modusBtnLock off
2014-02-24 09:32:23 R-pairCentral 0x4F7315
2014-02-26 20:25:48 actuator 0 %
2014-02-26 20:00:45 aesKeyNbr FF
2014-02-26 20:25:48 battery ok
2014-02-26 20:25:48 batteryLevel 2.9 V
2014-02-26 20:25:48 desired-temp 18
2014-02-26 20:25:48 measured-temp 21.2
2014-02-26 20:23:16 state CMDs_done
2014-02-26 20:23:16 time-request -
Helper:
cSnd 114F7315222F43860424
mId 0095
rxType 140
Bm:
Cul_hm_attr:
cnt 13
mAr set; hm.thermo.1; actCycle; 000:10
max 4
tot 6
Cul_hm_define:
cnt 1
mAr HASH(0x25ffd30); hm.thermo.1 CUL_HM 222F43
max 27
tot 27
Cul_hm_get:
cnt 4
mAr
max 0
tot 0
Cul_hm_set:
cnt 29
mAr HASH(0x25ffd30); hm.thermo.1; ?
max 3
tot 86
Io:
newChn +222F43,00,01,1E
nextSend 1393442748.23927
Prt:
bErr 0
sProc 0
sleeping 1
Rspwait:
Q:
qReqConf
qReqStat
Role:
dev 1
Rssi:
At_hm.lan.1:
avg -75.4411764705882
cnt 306
lst -77
max -66
min -87
Shregw:
07 04
Shadowreg:
Attributes:
actCycle 000:10
actStatus alive
autoReadReg 4_reqStatus
event-on-change-reading .*
expert 1_on
firmware 1.0
group Heizung,Dusche
model HM-CC-RT-DN
peerIDs
room 02_Dusche,60_Heizung
serialNr KEQ0517096
subType thermostat
webCmd getConfig:clear msgEvents:burstXmit
Internals:
DEF 240578
IODev hm.lan.1
LASTInputDev hm.lan.1
MSGCNT 40
NAME hm.sw.4
NR 255
STATE off
TYPE CUL_HM
hm.lan.1_MSGCNT 40
hm.lan.1_RAWMSG E240578,0000,0251EB58,FF,FFBA,21A4102405784F731506010000
hm.lan.1_RSSI -70
hm.lan.1_TIME 2014-02-26 20:00:21
lastMsg No:21 - t:10 s:240578 d:4F7315 06010000
protLastRcv 2014-02-26 20:00:21
protSnd 41 last_at:2014-02-26 20:00:21
protState CMDs_done
rssi_at_hm.lan.1 avg:-72.92 min:-80 max:-70 lst:-70 cnt:40
rssi_hm.lan.1 avg:-75 min:-75 max:-75 lst:-75 cnt:1
CHANGETIME:
Helper:
Dblog:
Devicemsg:
Mydblog:
TIME 1393441195.16951
VALUE off (to hm.lan.1)
Level:
Mydblog:
TIME 1393441195.16951
VALUE 0
Pct:
Mydblog:
TIME 1393441195.16951
VALUE 0
State:
Mydblog:
TIME 1393441195.16951
VALUE off
Timedon:
Mydblog:
TIME 1393441195.16951
VALUE off
Readings:
2014-02-25 21:20:38 CommandAccepted yes
2014-02-25 06:46:32 D-firmware 2.2
2014-02-25 06:46:32 D-serialNr KEQ0881311
2014-02-25 06:38:46 PairedTo 0x4F7315
2014-02-25 06:38:46 R-confBtnTime 255 min
2014-02-25 06:38:46 R-intKeyVisib invisib
2014-02-25 06:38:46 R-localResDis off
2014-02-25 06:38:46 R-pairCentral 0x4F7315
2014-02-25 06:38:48 R-sign off
2014-02-25 06:38:48 R-statusInfoMinDly 2 s
2014-02-25 06:38:48 R-statusInfoRandom 1 s
2014-02-25 06:38:48 R-transmitTryMax 6
2014-02-26 19:59:55 deviceMsg off (to hm.lan.1)
2014-02-26 19:59:55 level 0 %
2014-02-26 19:59:55 pct 0
2014-02-26 19:59:55 recentStateType info
2014-02-26 19:59:55 state off
2014-02-26 19:59:55 timedOn off
Helper:
cSnd 014F7315240578010E
mId 0069
rxType 1
Bm:
Cul_hm_attr:
cnt 13
mAr set; hm.sw.4; model; HM-LC-Sw1PBU-FM
max 2
tot 2
Cul_hm_define:
cnt 1
mAr HASH(0x24dd7f0); hm.sw.4 CUL_HM 240578
max 16
tot 16
Cul_hm_get:
cnt 1
mAr
max 0
tot 0
Cul_hm_set:
cnt 18
mAr HASH(0x24dd7f0); hm.sw.4; ?
max 4
tot 68
Io:
newChn +240578,00,01,1E
nextSend 1393441221.72876
Prt:
bErr 0
sProc 0
Rspwait:
Q:
qReqConf
qReqStat
Role:
chn 1
dev 1
Rpt:
IO hm.lan.1
flg A
ts 1393441221.63929
ack:
HASH(0x24dd7f0)
2180024F731524057800
Rssi:
At_hm.lan.1:
avg -72.925
cnt 40
lst -70
max -70
min -80
Hm.lan.1:
avg -75
cnt 1
lst -75
max -75
min -75
Shadowreg:
Attributes:
autoReadReg 4_reqStatus
expert 1_on
firmware 2.2
group Schalter
model HM-LC-Sw1PBU-FM
peerIDs 00000000,
room 02_Dusche,41_Schalter
serialNr KEQ0881311
subType switch
verbose 2
webCmd toggle:on:off:statusRequest
Internals:
DEF hm.sw.4:on [b]set set[/b] hm.thermo.1.clima desired-temp 21.5
NAME noty.hm.sw.4.on
NOTIFYDEV hm.sw.4
NR 257
NTFY_ORDER 50-noty.hm.sw.4.on
REGEXP hm.sw.4:on
STATE active
TYPE notify
Helper:
Bm:
Notify_attr:
cnt 1
mAr
max 0
tot 0
Notify_define:
cnt 1
mAr
max 0
tot 0
Notify_exec:
cnt 9
mAr HASH(0x24de110); HASH(0x24dd7f0)
max 20
tot 82
Attributes:
room 02_Dusche,81_Notifies
Internals:
DEF hm.sw.4:off set hm.thermo.1.clima desired-temp 18.0
NAME noty.hm.sw.4.off
NOTIFYDEV hm.sw.4
NR 259
NTFY_ORDER 50-noty.hm.sw.4.off
REGEXP hm.sw.4:off
STATE active
TYPE notify
Helper:
Bm:
Notify_attr:
cnt 1
mAr
max 0
tot 0
Notify_define:
cnt 1
mAr
max 0
tot 0
Notify_exec:
cnt 9
mAr HASH(0x24dcc80); HASH(0x24dd7f0)
max 404
tot 1329
Attributes:
room 02_Dusche,81_Notifies
Das was micht extrem wundert
der ON kommt nicht bei dem Thermostat an :-(
Hat da noch jemand irgendwelche Ideen?
Wirklich fragend
Ralf
achso, habe etwas wichtiges vergessen 8)
Im Bad funktioniert die Kombi perfekt (hm.thermo.2 und hm.sw.5)
In der Dusche geht off, aber nicht on
Hallo, hatte gestern das gleiche Problem, mit dem heutigen Update geht alles wieder.
VG
Frank
Hallo Frank,
beim gefühlten 87. durchschauen habe ich erst den doppelten SET gefunden :-(
Das kommt davon wenn man die Kanäle nach dem Update neu anlegt und dann falsch Cut & Paste macht :-(
Eigene Doffheit 8)
Danke
Ralf
Zu meiner Entschuldigung muss ich sagen, dass ich garnicht auf den Code geschaut habe ::)
da bei mir gestern nach dem Update die komplette LED Anzeige (alles auf notify Basis gemacht) nicht mehr funktionierte und mein erster Gedanke war, dass es bei dir auch mit dem Update zusammenhängt.
*schämundweg*
VG
Frank
Das kenne ich auch :-)
Im Badezimmer hat es halt funktioniert nur in dieser doofen Dusche nicht...
Hätte ich mal lieber C&P in der CFG gemacht