EDIT: Fehler gefunden, ich habe überlesen, dass man die .gplot Dateien in die configDB speichern muss.
Guten Abend zusammen,
Ich habe vor kurzem mein Fhem auf dem Raspberry Pi mit ConfigDB und dem (sehr gelungenen) iOS6 Style neu aufgesetzt. Gerade bin ich dabei mit Sysmon das Systemmonitoring zu realisieren. Dazu habe ich mich an die Beispieldefinition aus der Commandref gehalten. Leider zeigt mir FHEM auf der Weboberfläche keine Plots an. Anstelle der Plots bekomme ich ein "Cannot read ./www/gplot/SM_CPUStat.gplot". Die Datei ist aber im angegebene Verzeichnis vorhanden.
Hier die entsprechenden Verzeichnis- und Dateirechte:
drwxrwxrwx 9 fhem root 4096 Mai 21 17:05 www
drwxrwxrwx 2 fhem root 4096 Mai 21 17:05 gplot
-rw-rw-rw- 1 fhem dialout 1507 Mai 21 17:05 SM_CPUStat.gplot
-rw-rw-rw- 1 fhem dialout 1675 Mai 21 17:05 SM_CPUStatSum.gplot
-rw-rw-rw- 1 fhem dialout 682 Mai 21 17:05 SM_CPUStatTotal.gplot
-rw-rw-rw- 1 fhem dialout 872 Mai 21 17:05 SM_CPUTemp.gplot
-rw-rw-rw- 1 fhem dialout 1260 Mai 21 17:05 SM_DB_all.gplot
-rw-rw-rw- 1 fhem dialout 398 Mai 21 17:05 SM_DB_CPUFreq.gplot
-rw-rw-rw- 1 fhem dialout 600 Mai 21 17:05 SM_DB_CPUTemp.gplot
-rw-rw-rw- 1 fhem dialout 1093 Mai 21 17:05 SM_DB_Load.gplot
-rw-rw-rw- 1 fhem dialout 827 Mai 21 17:05 SM_DB_Network_eth0.gplot
-rw-rw-rw- 1 fhem dialout 804 Mai 21 17:05 SM_DB_RAM.gplot
-rw-rw-rw- 1 fhem dialout 1289 Mai 21 17:05 SM_FS_root.gplot
-rw-rw-rw- 1 fhem dialout 1360 Mai 21 17:05 SM_FS_usb1.gplot
-rw-rw-rw- 1 fhem dialout 728 Mai 21 17:05 SM_Load.gplot
-rw-rw-rw- 1 fhem dialout 616 Mai 21 17:05 SM_Network_eth0.gplot
-rw-rw-rw- 1 fhem dialout 738 Mai 21 17:05 SM_Network_eth0t.gplot
-rw-rw-rw- 1 fhem dialout 620 Mai 21 17:05 SM_Network_wlan0.gplot
-rw-rw-rw- 1 fhem dialout 633 Mai 21 17:05 SM_RAM.gplot
Sind die So in Ordnung?
Grüße,
Matthias
Rechte?
Rechte?