Hi
Sorry, aber ich benoetige dringend eure Hilfe. Hab ich ein Bewaesserungssystem mit 7390 und einer CUL. Mein fhem.cfg ist ziemlich einfach noch. Jedoch sieht es aus als wuerde mein Fritzbox sich ca. alle 10min komplett resetieren. FHEM steht deshalb praktisch kaum zur Verfuegung. Hab bereits meine 7390 mit einer anderen gewechselt, der Effekt bleibt. Sieht aus als hab ich ein Problem mit CUL? Oder mit FHEM?
Anbei meine fhem.cfg, aber ist ziemlich basic noch.
Danke fuer eure Hilfe im vorraus
attr global autoload_undefined_devices 1
attr global logfile ./log/fhem-%Y-%m.log
attr global modpath .
attr global motd SecurityCheck:\
\
WEB,WEBphone,WEBtablet has no basicAuth attribute.\
telnetPort has no password/globalpassword attribute.\
\
Restart FHEM for a new check if the problem is fixed,\
or set the global attribute motd to none to supress this message.\
attr global statefile ./log/fhem.save
attr global updateInBackground 1
attr global userattr devStateIcon devStateStyle fm_type icon sortby webCmd widgetOverride
attr global verbose 3
define telnetPort telnet 7072 global
define WEB FHEMWEB 8083 global
attr WEB stylesheetPrefix dark
define WEBphone FHEMWEB 8084 global
attr WEBphone stylesheetPrefix smallscreen
define WEBtablet FHEMWEB 8085 global
attr WEBtablet stylesheetPrefix touchpad
# Fake FileLog entry, to access the fhem log from FHEMWEB
define Logfile FileLog ./log/fhem-%Y-%m.log fakelog
define autocreate autocreate
attr autocreate autosave 1
attr autocreate filelog ./log/%NAME-%Y.log
define eventTypes eventTypes ./log/eventTypes.txt
# Disable this to avoid looking for new USB devices on startup
define initialUsbCheck notify global:INITIALIZED usb create
define CUL_0 CUL /dev/ttyACM0@38400 1034
attr CUL_0 rfmode HomeMatic
define Watering CUL_HM 29C4F1
attr Watering .devInfo 040400
attr Watering .stc 10
attr Watering IODev CUL_0
attr Watering autoReadReg 4_reqStatus
attr Watering expert 2_full
attr Watering firmware 1.12
attr Watering model HM-LC-SW4-PCB
attr Watering room Rudarci_Garten
attr Watering serialNr LEQ0250525
attr Watering subType switch
attr Watering webCmd getConfig
define FileLog_Watering FileLog ./log/Watering-%Y.log Watering
attr FileLog_Watering logtype text
attr FileLog_Watering room CUL_HM
define Ventil1 CUL_HM 29C4F101
attr Ventil1 expert 1
attr Ventil1 model HM-LC-SW4-PCB
attr Ventil1 peerIDs 00000000,
attr Ventil1 room CUL_HM
attr Ventil1 webCmd toggle:on:off:statusRequest
define FileLog_Ventil1 FileLog ./log/Ventil1-%Y.log Ventil1
attr FileLog_Ventil1 logtype text
attr FileLog_Ventil1 room CUL_HM
define Ventil2 CUL_HM 29C4F102
attr Ventil2 expert 1
attr Ventil2 model HM-LC-SW4-PCB
attr Ventil2 peerIDs 00000000,
attr Ventil2 room CUL_HM
attr Ventil2 webCmd toggle:on:off:statusRequest
define FileLog_Ventil2 FileLog ./log/Ventil2-%Y.log Ventil2
attr FileLog_Ventil2 logtype text
attr FileLog_Ventil2 room CUL_HM
define Ventil3 CUL_HM 29C4F103
attr Ventil3 expert 1
attr Ventil3 model HM-LC-SW4-PCB
attr Ventil3 peerIDs 00000000,
attr Ventil3 room CUL_HM
attr Ventil3 webCmd toggle:on:off:statusRequest
define FileLog_Ventil3 FileLog ./log/Ventil3-%Y.log Ventil3
attr FileLog_Ventil3 logtype text
attr FileLog_Ventil3 room CUL_HM
define Ventil4 CUL_HM 29C4F104
attr Ventil4 expert 1
attr Ventil4 icon sani_irrigation
attr Ventil4 model HM-LC-SW4-PCB
attr Ventil4 peerIDs 00000000,
attr Ventil4 room Rudarci_Garten
attr Ventil4 webCmd toggle:on:off:statusRequest
define FileLog_Ventil4 FileLog ./log/Ventil4-%Y.log Ventil4
attr FileLog_Ventil4 icon sani_irrigation
attr FileLog_Ventil4 logtype text
attr FileLog_Ventil4 room CUL_HM
define Rudarci_Wetter Weather 839308 de
attr Rudarci_Wetter room Rudarci_Garten
define Villa_Wetter weblink iframe http://weather.yahooapis.com/forecastrss?w=839308&u=c
define Fhemobile dummy
define HM HMinfo
attr HM sumERROR battery:ok,sabotageError:off,powerError:ok,overload:off,overheat:off,reduced:off,motorError:no,error:none,uncertain:yes,smoke_detect:none,cover:closed
attr HM sumStatus battery,sabotageError,powerError,motor
attr HM webCmd update:protoEvents short:rssi:peerXref:configCheck:models
define pushmsg Pushover aSuCSisBkekokMzMwq5NbMpMYLsig8 uTyGVpqvYfJzEEXDtJaERhaw3ZsoQa
hallo hauna1,
define initialUsbCheck notify global:INITIALIZED usb create
vielleicht macht das probleme.
ansonsten wären logs ganz hilfreich. fhemlog.
gruss frank
Hi
Danke fuer deine rasche Antwort. im Logfile steht nicht allzuviel an hilfreicher Info.
2014.07.07 06:29:44 1: Including fhem.cfg
2014.07.07 06:29:45 3: telnetPort: port 7072 opened
2014.07.07 06:29:50 3: WEB: port 8083 opened
2014.07.07 06:29:50 3: WEBphone: port 8084 opened
2014.07.07 06:29:50 3: WEBtablet: port 8085 opened
2014.07.07 06:29:51 2: eventTypes: loaded 49 events from ./log/eventTypes.txt
2014.07.07 06:29:51 3: Opening CUL_0 device /dev/ttyACM0
2014.07.07 06:29:52 3: Setting CUL_0 baudrate to 9600
2014.07.07 06:29:52 3: CUL_0 device opened
2014.07.07 06:29:52 3: CUL_0: Possible commands: BCFiAZEGMKURTVWXefmltux
2014.07.07 06:29:52 2: Switched CUL_0 rfmode to HomeMatic
2014.07.07 06:29:57 1: Including ./log/fhem.save
2014.07.07 06:29:57 1: usb create starting
2014.07.07 06:29:57 3: Probing CUL device /dev/ttyACM1
2014.07.07 06:29:57 3: Can't open /dev/ttyACM1: Invalid argument
2014.07.07 06:29:57 3: Probing TCM310 device /dev/ttyUSB0
2014.07.07 06:29:57 3: Can't open /dev/ttyUSB0: No such device or address
2014.07.07 06:29:57 3: Probing TCM310 device /dev/ttyUSB1
2014.07.07 06:29:57 3: Can't open /dev/ttyUSB1: No such device or address
2014.07.07 06:29:57 1: usb create end
2014.07.07 06:29:57 2: SecurityCheck: WEB,WEBphone,WEBtablet has no basicAuth attribute. telnetPort has no password/globalpassword attribute. Running with root privileges. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2014.07.07 06:29:57 0: Server started with 25 defined entities (version $Id: fhem.pl 6080 2014-06-07 16:12:09Z rudolfkoenig $, os linux, user unknown, pid 1809)
2014.07.07 07:13:07 1: Including fhem.cfg
2014.07.07 07:13:08 3: telnetPort: port 7072 opened
2014.07.07 07:13:14 3: WEB: port 8083 opened
2014.07.07 07:13:14 3: WEBphone: port 8084 opened
2014.07.07 07:13:14 3: WEBtablet: port 8085 opened
2014.07.07 07:13:15 2: eventTypes: loaded 49 events from ./log/eventTypes.txt
2014.07.07 07:13:15 3: Opening CUL_0 device /dev/ttyACM0
2014.07.07 07:13:16 3: Setting CUL_0 baudrate to 9600
2014.07.07 07:13:16 3: CUL_0 device opened
2014.07.07 07:13:16 3: CUL_0: Possible commands: BCFiAZEGMKURTVWXefmltux
2014.07.07 07:13:16 2: Switched CUL_0 rfmode to HomeMatic
2014.07.07 07:13:21 1: Including ./log/fhem.save
2014.07.07 07:13:21 1: usb create starting
2014.07.07 07:13:21 3: Probing CUL device /dev/ttyACM1
2014.07.07 07:13:21 3: Can't open /dev/ttyACM1: Invalid argument
2014.07.07 07:13:21 3: Probing TCM310 device /dev/ttyUSB0
2014.07.07 07:13:21 3: Can't open /dev/ttyUSB0: No such device or address
2014.07.07 07:13:21 3: Probing TCM310 device /dev/ttyUSB1
2014.07.07 07:13:21 3: Can't open /dev/ttyUSB1: No such device or address
2014.07.07 07:13:21 1: usb create end
2014.07.07 07:13:21 2: SecurityCheck: WEB,WEBphone,WEBtablet has no basicAuth attribute. telnetPort has no password/globalpassword attribute. Running with root privileges. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2014.07.07 07:13:21 0: Server started with 25 defined entities (version $Id: fhem.pl 6080 2014-06-07 16:12:09Z rudolfkoenig $, os linux, user unknown, pid 1761)
Zitatim Logfile steht nicht allzuviel an hilfreicher Info.
sehe ich anders.
2014.07.07 06:29:57 1: usb create end
2014.07.07 06:29:57 2: SecurityCheck: WEB,WEBphone,WEBtablet has no basicAuth attribute. telnetPort has no password/globalpassword attribute. Running with root privileges. Restart FHEM for a new check if the problem is fixed, or set the global attribute motd to none to supress this message.
2014.07.07 06:29:57 0: Server started with 25 defined entities (version $Id: fhem.pl 6080 2014-06-07 16:12:09Z rudolfkoenig $, os linux, user unknown, pid 1809)
direkt nach usb create end wird neu gestartet. wie schon angedeutet kommentiere das notify mal aus und starte neu.
Danke fuer die Info. Werds sofort ausprobieren.