Hallo ihr,
Ich habe folgendes Problem. Ich möchte gerne in Konferenzräumen das Licht via HM-sec-MDIR automatisch ein und ausschalten. Davon habe ich vier Räume nebeneinander.
Wie macht man das am besten.
Zur Zeit mache ich es so:
Ich habe ein notify definiert, welches den HM-LC-Sw1-Pl-2 für 240 s anschaltet.
define CONF4on notify move04:motion:.on.* set CONF4_1 on-for-timer 240
Der HM-sec-MDIR ist so eingestellt, das er alle 60s senden soll. Allerdings weiß ich nicht, wie ich ihn auf statisch senden stellen oder ob er das schon ist.
move04 type:motionDetector -
list:peer register :value
0: intKeyVisib :invisib
0: pairCentral :0x39066
0: sabotageMsg :on
1: brightFilter :7
1: captInInterval :off
1: evtFltrNum :1
1: evtFltrPeriod :1 s
1: ledOnTime :0 s
1: minInterval :60
Außerdem habe ich das Problem, dass die HM-CFG-LAN ständig überlasstet ist. Deshalb denke ich, dass das noch nicht die optimale Lösung ist.
Hier die Logfiles.
2014.10.23 10:16:58 2: HMLAN_Parse: HMLAN1 new condition Overload-released
2014.10.23 10:16:58 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:17:30 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:19:15 2: HMLAN_Parse: HMLAN1 new condition ERROR-Overload
2014.10.23 10:19:21 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:21:04 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:21:28 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:23:02 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:23:46 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:24:04 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:25:15 2: HMLAN_Parse: HMLAN1 new condition Overload-released
2014.10.23 10:25:19 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:25:20 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:26:11 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:26:25 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:27:27 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:28:01 2: HMLAN_Parse: HMLAN1 new condition ERROR-Overload
2014.10.23 10:28:24 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:29:25 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:31:14 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:32:25 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:33:13 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:34:01 2: HMLAN_Parse: HMLAN1 new condition Overload-released
2014.10.23 10:34:04 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:34:51 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:35:12 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:36:13 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:37:09 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:37:28 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:39:50 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:40:12 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:40:27 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:40:50 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:42:06 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:42:10 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:43:10 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:44:10 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:45:19 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:45:24 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:46:05 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:46:28 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:47:06 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:47:14 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:48:09 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:48:29 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:49:14 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:50:12 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:50:15 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:50:47 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:51:56 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:52:14 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:52:14 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:53:21 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:53:31 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:54:16 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 10:54:22 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:54:33 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:54:53 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:55:56 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:56:01 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 10:56:23 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:57:00 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:57:10 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 10:57:45 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:57:57 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 10:58:02 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:58:56 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:58:57 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 10:59:12 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 10:59:13 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 10:59:55 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 10:59:57 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:00:03 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:00:26 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:00:58 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:02:04 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:02:13 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 11:02:35 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 11:03:02 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:03:15 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:03:27 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:03:37 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 11:04:02 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:04:05 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 11:04:15 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:05:03 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:05:20 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:05:53 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:06:21 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:07:01 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:07:15 2: HMLAN_Parse: HMLAN1 new condition ok
2014.10.23 11:07:23 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:07:54 2: HMLAN_Parse: HMLAN1 new condition Warning-HighLoad
2014.10.23 11:08:32 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:08:33 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:09:34 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:09:56 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:10:51 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:11:25 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:11:53 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:11:59 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:12:26 2: HMLAN_Parse: HMLAN1 new condition ERROR-Overload
2014.10.23 11:12:36 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:13:00 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:13:15 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:13:39 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:13:39 2: CUL_HM set CONF3_1 on-for-timer 240
2014.10.23 11:14:09 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:14:51 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:14:54 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:15:09 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:15:55 2: CUL_HM set CONF2_1 on-for-timer 240
2014.10.23 11:15:58 2: CUL_HM set CONF4_1 on-for-timer 240
2014.10.23 11:16:25 2: CUL_HM set CONF1_2 on-for-timer 240
2014.10.23 11:17:07 2: CUL_HM set CONF4_1 on-for-timer 240
2014-10-23_10:37:28 move04 motion
2014-10-23_10:37:28 move04 motion: on (to broadcast)
2014-10-23_10:37:28 move04 motionCount: 24_next:6-60
2014-10-23_10:37:28 move04 brightness: 36
2014-10-23_10:39:31 move04 brightness: 36
2014-10-23_10:39:31 move04 cover: closed
2014-10-23_10:39:31 move04 battery: ok
2014-10-23_10:40:27 move04 motion
2014-10-23_10:40:27 move04 motion: on (to broadcast)
2014-10-23_10:40:27 move04 motionCount: 25_next:6-60
2014-10-23_10:40:27 move04 brightness: 36
2014-10-23_10:44:04 move04 brightness: 36
2014-10-23_10:44:04 move04 cover: closed
2014-10-23_10:44:04 move04 battery: ok
2014-10-23_10:46:05 move04 motion
2014-10-23_10:46:05 move04 motion: on (to broadcast)
2014-10-23_10:46:05 move04 motionCount: 26_next:6-60
2014-10-23_10:46:05 move04 brightness: 36
2014-10-23_10:47:06 move04 motion
2014-10-23_10:47:06 move04 motion: on (to broadcast)
2014-10-23_10:47:06 move04 motionCount: 27_next:6-60
2014-10-23_10:47:06 move04 brightness: 36
2014-10-23_10:48:09 move04 motion
2014-10-23_10:48:09 move04 motion: on (to broadcast)
2014-10-23_10:48:09 move04 motionCount: 28_next:6-60
2014-10-23_10:48:09 move04 brightness: 36
2014-10-23_10:49:14 move04 motion
2014-10-23_10:49:14 move04 motion: on (to broadcast)
2014-10-23_10:49:14 move04 motionCount: 29_next:6-60
2014-10-23_10:49:14 move04 brightness: 36
2014-10-23_10:49:47 move04 brightness: 36
2014-10-23_10:49:47 move04 cover: closed
2014-10-23_10:49:47 move04 battery: ok
2014-10-23_10:50:15 move04 motion
2014-10-23_10:50:15 move04 motion: on (to broadcast)
2014-10-23_10:50:15 move04 motionCount: 30_next:6-60
2014-10-23_10:50:15 move04 brightness: 36
2014-10-23_10:52:14 move04 motion
2014-10-23_10:52:14 move04 motion: on (to broadcast)
2014-10-23_10:52:14 move04 motionCount: 31_next:6-60
2014-10-23_10:52:14 move04 brightness: 37
2014-10-23_10:53:31 move04 motion
2014-10-23_10:53:31 move04 motion: on (to broadcast)
2014-10-23_10:53:31 move04 motionCount: 32_next:6-60
2014-10-23_10:53:31 move04 brightness: 37
2014-10-23_10:54:33 move04 motion
2014-10-23_10:54:33 move04 motion: on (to broadcast)
2014-10-23_10:54:33 move04 motionCount: 33_next:6-60
2014-10-23_10:54:33 move04 brightness: 37
2014-10-23_10:55:14 move04 brightness: 37
2014-10-23_10:55:14 move04 cover: closed
2014-10-23_10:55:14 move04 battery: ok
2014-10-23_10:55:56 move04 motion
2014-10-23_10:55:56 move04 motion: on (to broadcast)
2014-10-23_10:55:56 move04 motionCount: 34_next:6-60
2014-10-23_10:55:56 move04 brightness: 37
2014-10-23_10:57:00 move04 motion
2014-10-23_10:57:00 move04 motion: on (to broadcast)
2014-10-23_10:57:00 move04 motionCount: 35_next:6-60
2014-10-23_10:57:00 move04 brightness: 37
2014-10-23_10:58:02 move04 motion
2014-10-23_10:58:02 move04 motion: on (to broadcast)
2014-10-23_10:58:02 move04 motionCount: 36_next:6-60
2014-10-23_10:58:02 move04 brightness: 37
2014-10-23_10:59:13 move04 motion
2014-10-23_10:59:13 move04 motion: on (to broadcast)
2014-10-23_10:59:13 move04 motionCount: 37_next:6-60
2014-10-23_10:59:13 move04 brightness: 37
2014-10-23_11:00:24 move04 brightness: 37
2014-10-23_11:00:24 move04 cover: closed
2014-10-23_11:00:24 move04 battery: ok
2014-10-23_11:00:26 move04 motion
2014-10-23_11:00:26 move04 motion: on (to broadcast)
2014-10-23_11:00:26 move04 motionCount: 38_next:6-60
2014-10-23_11:00:26 move04 brightness: 37
2014-10-23_11:03:27 move04 motion
2014-10-23_11:03:27 move04 motion: on (to broadcast)
2014-10-23_11:03:27 move04 motionCount: 40_next:6-60
2014-10-23_11:03:27 move04 brightness: 37
2014-10-23_11:05:18 move04 brightness: 37
2014-10-23_11:05:18 move04 cover: closed
2014-10-23_11:05:18 move04 battery: ok
2014-10-23_11:05:20 move04 motion
2014-10-23_11:05:20 move04 motion: on (to broadcast)
2014-10-23_11:05:20 move04 motionCount: 41_next:6-60
2014-10-23_11:05:20 move04 brightness: 37
2014-10-23_11:06:21 move04 motion
2014-10-23_11:06:21 move04 motion: on (to broadcast)
2014-10-23_11:06:21 move04 motionCount: 42_next:6-60
2014-10-23_11:06:21 move04 brightness: 37
2014-10-23_11:08:33 move04 motion
2014-10-23_11:08:33 move04 motion: on (to broadcast)
2014-10-23_11:08:33 move04 motionCount: 43_next:6-60
2014-10-23_11:08:33 move04 brightness: 37
2014-10-23_11:09:34 move04 motion
2014-10-23_11:09:34 move04 motion: on (to broadcast)
2014-10-23_11:09:34 move04 motionCount: 44_next:6-60
2014-10-23_11:09:34 move04 brightness: 37
2014-10-23_11:10:25 move04 brightness: 38
2014-10-23_11:10:25 move04 cover: closed
2014-10-23_11:10:25 move04 battery: ok
2014-10-23_11:11:25 move04 motion
2014-10-23_11:11:25 move04 motion: on (to broadcast)
2014-10-23_11:11:25 move04 motionCount: 45_next:6-60
2014-10-23_11:11:25 move04 brightness: 38
2014-10-23_11:12:36 move04 motion
2014-10-23_11:12:36 move04 motion: on (to broadcast)
2014-10-23_11:12:36 move04 motionCount: 46_next:6-60
2014-10-23_11:12:36 move04 brightness: 38
2014-10-23_11:13:39 move04 motion
2014-10-23_11:13:39 move04 motion: on (to broadcast)
2014-10-23_11:13:39 move04 motionCount: 47_next:6-60
2014-10-23_11:13:39 move04 brightness: 38
2014-10-23_11:14:54 move04 motion
2014-10-23_11:14:54 move04 motion: on (to broadcast)
2014-10-23_11:14:54 move04 motionCount: 48_next:6-60
2014-10-23_11:14:54 move04 brightness: 38
2014-10-23_11:15:15 move04 brightness: 38
2014-10-23_11:15:15 move04 cover: closed
2014-10-23_11:15:15 move04 battery: ok
2014-10-23_11:15:58 move04 motion
2014-10-23_11:15:58 move04 motion: on (to broadcast)
2014-10-23_11:15:58 move04 motionCount: 49_next:6-60
2014-10-23_11:15:58 move04 brightness: 37
2014-10-23_11:17:07 move04 motion
2014-10-23_11:17:07 move04 motion: on (to broadcast)
2014-10-23_11:17:07 move04 motionCount: 50_next:6-60
2014-10-23_11:17:07 move04 brightness: 37
2014-10-23_11:18:12 move04 motion
2014-10-23_11:18:12 move04 motion: on (to broadcast)
2014-10-23_11:18:12 move04 motionCount: 51_next:6-60
2014-10-23_11:18:12 move04 brightness: 37
2014-10-23_11:19:23 move04 motion
2014-10-23_11:19:23 move04 motion: on (to broadcast)
2014-10-23_11:19:23 move04 motionCount: 52_next:6-60
2014-10-23_11:19:23 move04 brightness: 37
Ich hoffe, ihr könnt mir helfen.
Gruß fairsein
hi fairsein,
ZitatDer HM-sec-MDIR ist so eingestellt, das er alle 60s senden soll
wie?
Zitat
Außerdem habe ich das Problem, dass die HM-CFG-LAN ständig überlasstet ist.
dann löse es ohne FHEM.
peere den/die jeweiligen Aktoren mit dem mdir. dann stelle ein, wann/wie der mdir detekieren soll.
und schliesslich stelle ein, was der jeweilige Aktor machen soll, wenn der MDIR eine bewegung sendet. Das ist dann wohl "licht an für 240 sec
Gruss Martin