Hallo,
ich hatte vor kurzer Zeit bei Conrad die RSL366 Funksteckdosen gekauft. Funktionieren mit fhem und pilight perfekt. Nur hatte ich immer mit der Fernbedienung "Probleme", da pilight-receive immer unterschiedliche Signale anzeigt.
Da ich sowieso noch paar Funksteckdosen benötige, habe ich nun die RCS1000N bestellt in der Hoffnung, dass damit die Fernbedienung "normale" Signale sendet. Leider habe ich dort das gleiche Problem.
Folgender Output von pilight-receive, wenn ich 3x die Taste ON drücke:
{
"message": {
"systemcode": 2,
"unitcode": 10,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_400_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 23,
"unitcode": 21,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 23,
"unitcode": 21,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"id": 16,
"systemcode": 4181,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"unitcode": 700350,
"state": "closed"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 16,
"unitcode": 9,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_400_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 30,
"unitcode": 13,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 30,
"unitcode": 13,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"id": 16,
"systemcode": 4181,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"unitcode": 700350,
"state": "closed"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 790613,
"unitcode": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "logilink_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 22,
"unitcode": 5,
"state": "closed"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 22,
"unitcode": 5,
"state": "off"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"id": 48,
"systemcode": 4181,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"unitcode": 700350,
"state": "closed"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 22,
"unitcode": 3,
"state": "closed"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 22,
"unitcode": 3,
"state": "off"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"id": 16,
"systemcode": 4181,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"unitcode": 700350,
"state": "closed"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 18,
"unitcode": 14,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_400_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 1
}
{
"message": {
"systemcode": 22,
"unitcode": 17,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 2
}
{
"message": {
"systemcode": 22,
"unitcode": 17,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 2
}
{
"message": {
"id": 16,
"systemcode": 4181,
"unit": 1,
"state": "on"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 2
}
{
"message": {
"unitcode": 700350,
"state": "closed"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 2
}
{
"message": {
"systemcode": 18,
"unitcode": 23,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_400_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 2
}
{
"message": {
"systemcode": 22,
"unitcode": 2,
"state": "opened"
},
"origin": "receiver",
"protocol": "elro_800_contact",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 3
}
{
"message": {
"systemcode": 22,
"unitcode": 2,
"state": "on"
},
"origin": "receiver",
"protocol": "elro_800_switch",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 3
}
{
"message": {
"id": 48,
"systemcode": 4437,
"unit": 7,
"state": "off"
},
"origin": "receiver",
"protocol": "daycom",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 3
}
{
"message": {
"unitcode": 175038,
"state": "opened"
},
"origin": "receiver",
"protocol": "ev1527",
"uuid": "0000-b8-27-eb-9dfeac",
"repeats": 3
}
Ich bin irritiert, dass die Fernbedienung (wie auch die der RSL366) immer andere Codes schickt. Mache ich irgendwas falsch?
Eigentlich ging ich immer davon aus, dass die Fernbedienungen immer das gleiche Signal schicken sollte. Zumindest tat das mein Aldi-Set, bei dem die Fernbedienung leider kaputt ging.
Jemand eine Idee?
Hat niemand eine Idee? Wie steuert ihr eure in fhem integrierten Geräte, immer mit FS20 oder ähnlichen Schaltern/Tastern?
Ich dachte ja, dass eine Fernbedienung eine günstige Alternative ist.