Hallo,
ich bin noch FHEM Anfänger aber dafür sehr begeistert
im Sonderpostenmarkt habe ich günstig 2 Tür- / Fenster- Magnetkontaktsets gekauft.
(Auch in Baumärkten sind diese noch zu finden)
Marke: Unitec
Modelnummer: 47031.
Frequenz: 433 MHz
Fotos vom Gerät sind in der Anlage.
Leider werden diese z. Zt. weder vom FHEMduino noch vom CUL unterstützt.
(Zumindest habe ich nichts dazu gefunden)
Daher habe ich einen SIGNALduino gebaut (Danke an das Projekt!) und das Signal mit Verbose 4 geloggt.
Es handelt sich um den Log das einmaligen "öffnen des Kontaktes".
2015.10.31 13:59:14 4: SIGNALduino/msg READ: MU;P0=-10026;P1=-924;P2=309;P3=-688;P4=-361;P5=637;D=123245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023240;CP=2;O;
2015.10.31 13:59:14 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:14 4: Found matched Protocol id 8 -> TX3 Protocol
2015.10.31 13:59:14 4: SIGNALduino/msg READ: MU;P0=636;P1=-363;P2=-689;P3=309;P4=-10026;D=010231023102310231023432310102310231023102310234323101023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102343231010230;CP=3;O;
2015.10.31 13:59:14 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:14 4: Found matched Protocol id 8 -> TX3 Protocol
2015.10.31 13:59:14 4: SIGNALduino/msg READ: MU;P0=-363;P1=639;P2=-688;P3=308;P4=-10024;D=012301230123012343230101230123012301230123432301012301230123012301234323010123012301230123012343230101230123012301230123432301012301230123012301234323010123012301230123012343230101230123012301230123432301012301230123012301234323010123012300;CP=3;O;
2015.10.31 13:59:14 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:14 4: Found matched Protocol id 8 -> TX3 Protocol
2015.10.31 13:59:15 4: SIGNALduino/msg READ: MU;P0=639;P1=-688;P2=308;P3=-363;P4=-10026;D=012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012300;CP=2;O;
2015.10.31 13:59:15 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:15 4: Found matched Protocol id 8 -> TX3 Protocol
2015.10.31 13:59:15 4: SIGNALduino/msg READ: MU;P0=-692;P1=308;P2=-363;P3=636;P4=-10023;D=012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012300;CP=1;O;
2015.10.31 13:59:15 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:15 4: Found matched Protocol id 8 -> TX3 Protocol
2015.10.31 13:59:15 4: SIGNALduino/msg READ: MU;P0=307;P1=-10027;P2=-691;P3=-365;P4=635;D=0102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201;CP=0;
2015.10.31 13:59:15 4: Found matched Protocol id 16 -> Dooya shutter
2015.10.31 13:59:15 4: Found matched Protocol id 8 -> TX3 Protocol
Leider weiß ich nicht wie ich weiter vorgehen soll und suche hier Unterstützung ;-)
Gruß
Michael
Hallo,
Kein Problem, dafür gibt es ja das Forum.
Ich habe mir das Signal angesehen.
Folgende Nachricht steht in deiner ersten Logzeile:
0 1 1 0 1 0 1 0 1 0 1 0
Heute ist Formel 1, die demoduluierung baue ich dir morgen ein.
Grüße Sidey
Moin,
Ich habe das Signal mal eingebaut:
Demodulieren sollte klappen. Das aktualisierte Modul bekommst Du via:
update force http://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r32/controls_signalduino.txt
Probier mal mehrfach den gleichen Kontakt aus und prüfe ob die gleiche Nachricht im Log auftaucht.
Dann mit etwas Versagt, kannst Du ja noch einen 2. Probieren.
Am besten den Abschnitt vom Log noch mal Posten. Vielleicht ha
ben wir Glück und man kann die Daten von einem vorhandenen Modul verarbeiten lassen.
Grüße Sidey
Hallo Sidey,
vielen Dank für die Hilfe.
die Version V 3.1.8-HF1 SIGNALduino - compiled at Oct 26 2015 11:10:38 habe ich geflasht.
Anbei der Log:
2015.11.02 19:08:00 4: SIGNALduino/msg READ: MU;P0=-689;P1=309;P2=-365;P3=637;P4=-10027;D=010123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410120;CP=1;O;
2015.11.02 19:08:00 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:00 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:00 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:00 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:00 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:01 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.02 19:08:01 4: SIGNALduino_unknown rawData: 6AA
2015.11.02 19:08:01 4: SIGNALduino_unknown Protocol: 30
2015.11.02 19:08:01 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:01 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:02 4: SIGNALduino/msg READ: MU;P0=637;P1=-362;P2=-689;P3=309;P4=-10029;D=010231023102310231023432310102310231023102310234323101023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102343231010230;CP=3;O;
2015.11.02 19:08:02 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:02 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:02 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:02 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:02 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:02 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.02 19:08:02 4: SIGNALduino_unknown rawData: 6AA
2015.11.02 19:08:02 4: SIGNALduino_unknown Protocol: 30
2015.11.02 19:08:02 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:02 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:05 4: SIGNALduino/msg READ: MU;P0=310;P1=-687;P2=-360;P3=640;P4=-10026;D=010232310231023102310231040102323102310231023102310401023231023102310231023104010232310231023102310231040102323102310231023102310401023231023102310231023104010232310231023102310231040102323102310231023102310401023231023102310231023104010230;CP=0;O;
2015.11.02 19:08:05 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:05 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.02 19:08:05 4: SIGNALduino_unknown rawData: 6AA
2015.11.02 19:08:05 4: SIGNALduino_unknown Protocol: 30
2015.11.02 19:08:05 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:05 4: SIGNALduino/msg READ: MU;P0=-362;P1=639;P2=-685;P3=313;P4=-10023;D=012301230123012301234323010123012301230123012343230101230123012301230123432301012301230123012301234323010123012301230123012343230101230123012301230123432301012301230123012301234323010123012301230123012343230101230123012301230123432301012300;CP=3;O;
2015.11.02 19:08:05 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:05 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:05 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:06 4: SIGNALduino/msg READ: MU;P0=637;P1=-690;P2=308;P3=-362;P4=-10024;D=012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012300;CP=2;O;
2015.11.02 19:08:06 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:06 4: SIGNALduino/msg READ: MU;P0=-690;P1=309;P2=-361;P3=639;P4=-10021;D=012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012300;CP=1;O;
2015.11.02 19:08:06 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:06 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:06 4: SIGNALduino_unknown incomming msg: u30#6A8
2015.11.02 19:08:06 4: SIGNALduino_unknown rawData: 6A8
2015.11.02 19:08:06 4: SIGNALduino_unknown Protocol: 30
2015.11.02 19:08:06 4: SIGNALduino_unknown converted to bits: 011010101000
2015.11.02 19:08:06 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:06 4: SIGNALduino/msg READ: MU;P0=307;P1=-363;P2=637;P3=-691;P4=-10023;D=012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012300;CP=0;O;
2015.11.02 19:08:06 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:07 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.02 19:08:07 4: SIGNALduino_unknown rawData: 6AA
2015.11.02 19:08:07 4: SIGNALduino_unknown Protocol: 30
2015.11.02 19:08:07 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.02 19:08:07 4: SIGNALduino/msg READ: MU;P0=-10023;P1=308;P2=-690;P3=-359;P4=704;P5=-32001;D=01213434213421342134213421012134342134213421342134210121343421342134213421342101213434213421342134213421012134342134213421342134210121343421342134213421342101213434213421342134213421542;CP=1;
2015.11.02 19:08:07 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.02 19:08:07 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.02 19:08:07 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
Gruß Michael
Hi Michael,
das klappt ja selten so gut.
Ich nehme an, Du hast jetzt nur einen Magnetkontakt Schalter ausprobiert.
Bis auf einen wurden alle Nachrichten ja gleich demoduliert. Prima, das klappt selten auf Anhieb so gut.
Den einen Ausrutscher habe ich mit einer schon länger fälligen Anpassung korrigiert. Das kannst Du über die genannte Update URL erhalten.
Ich habe probiert die Daten mal an das bereits vorhandene IT Modul zu senden. Das geht nicht.
Wenn Du nicht Lust hast, ein eigenes Modul zu programmieren, kannst Du die Erkennung mit einem doif oder notify realisieren.
Ist zwar etwas "hard" coded aber für zwei Magnetkontakte sicher kein Problem. Du müsstest dann nur auf DMSG = 'u30#6AA" z.B. prüfen und könntest darauf einen State, dummy oder sonst was verändern.
Für den 2. müsstest Du natürlich noch den Code anpassen.
Grüße Sidey
Hallo Sidey,
Version V 3.2.0-b1 SIGNALduino - compiled at Nov 2 2015 22:17:03
1. Magnetkontakt
2015.11.03 19:44:08 4: SIGNALduino/msg READ: MU;P0=309;P1=636;P2=-690;P3=-363;P4=-10027;D=012031203120402031312031203120312031204020313120312031203120312040203131203120312031203120402031312031203120312031204020313120312031203120312040203131203120312031203120402031312031203120312031204020313120312031203120312040203131203120312030;CP=0;O;
2015.11.03 19:44:08 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.03 19:44:08 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.03 19:44:08 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.03 19:44:08 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:44:08 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:44:09 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.03 19:44:09 4: SIGNALduino_unknown rawData: 6AA
2015.11.03 19:44:09 4: SIGNALduino_unknown Protocol: 30
2015.11.03 19:44:09 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:09 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.03 19:44:09 4: SIGNALduino/msg READ: MU;P0=637;P1=-690;P2=309;P3=-362;P4=-10025;D=012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012301242123030123012301230123012421230301230123012301230124212303012301230123012300;CP=2;O;
2015.11.03 19:44:09 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:44:10 4: SIGNALduino_unknown incomming msg: u30#6AA
2015.11.03 19:44:10 4: SIGNALduino_unknown rawData: 6AA
2015.11.03 19:44:10 4: SIGNALduino_unknown Protocol: 30
2015.11.03 19:44:10 4: SIGNALduino_unknown converted to bits: 011010101010
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.03 19:44:10 4: SIGNALduino/msg READ: MU;P0=-687;P1=307;P2=-10027;P3=-364;P4=636;D=012101343401340134013401340121013434013401340134013401210134340134013401340134012101343401340134013401340121013434013401340134013401210134340134013401340134012101343401340134013401340121013434013401340134013401210134340134013401340134012100;CP=1;O;
2015.11.03 19:44:10 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.03 19:44:10 4: SIGNALduino/msg READ: MU;P0=307;P1=-363;P2=636;P3=-690;P4=-10028;D=012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012120;CP=0;O;
2015.11.03 19:44:10 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:44:10 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:10 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.11.03 19:44:11 4: SIGNALduino/msg READ: MU;P0=-693;P1=307;P2=-364;P3=636;P4=-10024;D=012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012301230123012301410123230123012301230123014101232301230123012301230141012323012300;CP=1;O;
2015.11.03 19:44:11 4: Fingerprint for Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.11.03 19:44:11 4: Fingerprint for Protocol id 27 -> remote27 matches, trying to demodulate
2015.11.03 19:44:11 4: Fingerprint for Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.11.03 19:44:11 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:44:11 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Dropped (u30#6AA) due to short time or equal msg
2015.11.03 19:44:11 4: Fingerprint for Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2. Magnetkontakt
2015.11.03 19:31:17 4: SIGNALduino/msg READ: MS;P1=642;P2=-354;P3=-9972;P4=324;D=1342121212121212121212121210;CP=1;SP=3;
2015.11.03 19:31:17 4: SIGNALduino/msg READ: MS;P0=-359;P1=322;P2=638;P3=-9988;D=2310202020202020202020202020;CP=2;SP=3;
2015.11.03 19:31:17 4: SIGNALduino/msg READ: MS;P0=652;P1=291;P3=-358;P5=-9984;D=05130303030303030302;CP=0;SP=5;
2015.11.03 19:31:17 4: SIGNALduino/msg READ: MU;P0=-9986;P1=1332;P2=-2124;P3=312;P4=-354;P5=640;D=123454545454545454545454545034545454545454545454545450345454545454545454545454503454545454545454545454545034545454545454545454545450345454545454545454545454503454545454545454545454545034545454545454545454545450345454545454545454545454503450;CP=5;O;
2015.11.03 19:31:17 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:31:17 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:31:18 4: SIGNALduino_unknown incomming msg: u30#FFF
2015.11.03 19:31:18 4: SIGNALduino_unknown rawData: FFF
2015.11.03 19:31:18 4: SIGNALduino_unknown Protocol: 30
2015.11.03 19:31:18 4: SIGNALduino_unknown converted to bits: 111111111111
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: SIGNALduino/msg READ: MU;P0=-2956;P1=641;P2=-355;P3=-9983;P4=316;D=001213421212121212121212121212134212121212121212121212121342121212121212121212121213421212121212121212121212134212121212121212121212121342121212121212121212121213421212121212121212121212134212121212121212121212121342121212121212121212121210;CP=1;O;
2015.11.03 19:31:18 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:31:18 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: SIGNALduino/msg READ: MU;P0=-9984;P1=316;P2=-354;P3=640;D=012323232323232323232323230123232323232323232323232301232323232323232323232323012323232323232323232323230123232323232323232323232301232323232323232323232323012323232323232323232323230123232323232323232323232301232323232323232323232323012320;CP=3;O;
2015.11.03 19:31:18 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:31:18 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:18 4: SIGNALduino/msg READ: MU;P0=642;P1=-355;P2=-9984;P3=315;D=010101010101010101010231010101010101010101010102310101010101010101010101023101010101010101010101010231010101010101010101010102310101010101010101010101023101010101010101010101010231010101010101010101010102310101010101010101010101023101010100;CP=0;O;
2015.11.03 19:31:19 4: Fingerprint for Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.11.03 19:31:19 4: Fingerprint for Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.11.03 19:31:19 4: SIGNALduino_unknown incomming msg: u30#FFF
2015.11.03 19:31:19 4: SIGNALduino_unknown rawData: FFF
2015.11.03 19:31:19 4: SIGNALduino_unknown Protocol: 30
2015.11.03 19:31:19 4: SIGNALduino_unknown converted to bits: 111111111111
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
2015.11.03 19:31:19 4: Dropped (u30#FFF) due to short time or equal msg
Gruß
Michael
Das sieht doch prima aus.
Kommst Du mit dem Stand jetzt soweit klar?
Grüße Sidey
Ehrlich?
Leider weiss ich so garnicht was ich nun tun muss:'(
Im Prinzip würde ich versuchen ein notify zu erstellen und wie du geschrieben hast DMSG = 'u30#6AA" auswerten wollen.
Da dies das 1. mal ist :'( muss ich erstmal lesen bzw. ein Beispiel suchen....
Naiv wie ich bin, dachte ich, das der Empfang vom FHEMduino oder vom CUL übernommen werden kann, wenn man nur erstmal weiß was da gesendet wird.
Ein Frage hätte ich zu : Dropped (u30#FFF) due to short time or equal msg
Dropped hört sich so nach "verwerfen" der MSG an?!?
Gruß
Michael
Hallo Michael,
kein Problem.
Das wäre auch mal einen Beitrag im WIKI wert, das Einsatzszenario ist ja durchaus da.
Der Signalduino selbst übernimmt den Empfang. Das klappt ja auch. Anschließend gibt er die Daten an ein anderes Modul weiter. Das sind die Dispatch Meldungen im Log.
Für den Magnetkontakt Schalter gibt es bislang halt einfach kein Modul, welches die Daten so umwandelt, dass in FHEM ein Gerät heraus kommt.
Es gibt aber eine alternative dazu. Ein anderer Anwender hat für ein anderes Protokoll das Problem wie folgt gelöst:
Zitat
define mydoif DOIF ([mySignalDuino:&DMSG] =~ "u21#12345676") (set myLamp on)
attr mydoif do always
In deinem Fall würde es so aussehen:
Zitat
define kontakt1 DOIF ([mySignalDuino:&DMSG] =~"u30#6AA") ()
attr kontakt1 do always
attr cmdstate offen
Zitat
define kontakt2 DOIF ([mySignalDuino:&DMSG] =~"u30#FFF") ()
attr kontakt2 do always
attr cmdstate offen
mySignalDuino ist auf den Namen deines Signalduino anzupassen.
Ich habs jetzt nicht richtig ausprobiert, aber vermutlich ist die Reaktion etwas träge. Das stellst Du ja schnell fest.
Dropped = verworfen ja. Das passiert, wenn die gleiche Nachricht in sehr kurzem Zeitabstand erneut empfangen wird um unnötig Last aus dem System zu nehmen.
Grüße Sidey
Hallo Sidey,
hab gestern und heute rumprobiert.
Der "tuerkontakt1" soll die Lampe "Wohnzimmer_Lampe_Boardlampe" schalten.
(Die Lampe "Wohnzimmer_Lampe_Boardlampe" kann ich über einen CUL von der Webseite schalten)
Die SIGNALDuino-LED blink und die bekannten Logzeilen werden erstellt.
Leider tut der "tuerkontakt1" selber garnichts. Kein Logeintrag, kein Event, kein Licht.
define tuerkontakt1 DOIF ([sduino:&DMSG] =~"u30#6AA") (set Wohnzimmer_Lampe_Boardlampe on)
attr tuerkontakt1 cmdState offen
attr tuerkontakt1 do always
Hast Du einen Tipp?
Gruß
Michael
Hallo Michael,
Die Gute Nachricht:
Das Problem liegt nicht bei bzw. an dir :)
Ein anderer User hat festgestellt, dass es seit ein paar Tagen nicht mehr funktioniert.
Ich kann aber im Moment nicht sagen, woran das liegt. Könnte am DOIF Modul liegen, ich versuch mal was zu finden.
Grüße Sidey
Zitat von: Sidey am 05 November 2015, 21:49:13
Hallo Michael,
Die Gute Nachricht:
Das Problem liegt nicht bei bzw. an dir :)
Ein anderer User hat festgestellt, dass es seit ein paar Tagen nicht mehr funktioniert.
Ich kann aber im Moment nicht sagen, woran das liegt. Könnte am DOIF Modul liegen, ich versuch mal was zu finden.
Grüße Sidey
Ich habe gerade auf ein Internal mit einem DOIF-Modul ohne Problem triggern können. Wenn kein
e_sduino_DMSG Reading im definierten DOIF-Modul erscheint, dann wurde kein Event von diesem Devices registriert.
Gruß
Damian
e_sduino_DMSG wird im DOIF nicht erzeugt.
Das Event wird also nicht erzeugt, fragt sich ja nur wieso...hmmm.
Habe das Problem jetzt gelöst, indem ich dotrigger mit beim Ändern eines Readings angebe.
So bekommt DOIF jetzt mit, dass sich was getan hat und ruft auch das internal ab.
Grüße Sidey
Klasse!
Es funktioniert.
Vielen, vielen Dank!
Michael
Hallo Sidey,
meine SD-Karte war platt:-(
Habe die Tage also eine neuen FHEM-Server aufgesetzt.
wie bekannt, habe ich :
update force http://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r32/controls_signalduino.txt
....und dann geflasht.
Version: V 3.2.0-b3 SIGNALduino - compiled at Nov 13 2015 21:39:55
Leider wird die msg. u30#6AA anscheinend nicht mehr ausgewertet.
Ich habe, aufgrund des schlechten Empfanges, eine besseren Empfänger aufgelötet.
Arduino /TX blinkt, wenn ein Signal gesendet wird.
Da das erfolglos war, hab ich meine FHEMduino umgeflasht...
--> selbes verhalten.
2015.11.30 22:54:22 4: SIGNALduino/msg READ: MS;P0=-314;P1=602;P3=-571;P4=-9924;D=14101010131010101310131013103;CP=1;SP=4;
2015.11.30 22:54:22 4: SIGNALduino/msg READ: MS;P1=402;P2=-591;P3=-253;P4=744;P5=-9928;D=1512134342134213421342134211;CP=1;SP=5;
2015.11.30 22:54:22 4: SIGNALduino/msg READ: MU;P0=176;P1=575;P2=-597;P3=-259;P5=-9913;D=121313121312131213121312151213131303131213121312131215121313121312131213121312151313131213121312131213121512131312131213121312131215121313121312131213121312151213131213121312131213121510;CP=1;
2015.11.30 22:54:22 4: Found matched Protocol id 16 -> Dooya shutter
2015.11.30 22:54:22 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:23 4: SIGNALduino/msg READ: MU;P0=406;P1=-258;P2=741;P3=-590;P4=-9919;D=012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012300;CP=0;O;
2015.11.30 22:54:23 4: Found matched Protocol id 16 -> Dooya shutter
2015.11.30 22:54:23 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:23 4: SIGNALduino/msg READ: MU;P0=-267;P1=574;P2=-136;P4=-588;P5=-9925;D=012141014151410101410141014101410141514101014101410141014101415141010141014101410141014151410101410141014101410141514101014101410141014101415141010141014101410141014151410101410141014101410141514101014101410141014101415141010141014101410140;CP=1;O;
2015.11.30 22:54:23 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:23 4: SIGNALduino/msg READ: MU;P0=398;P1=-268;P2=730;P3=-598;P4=-9930;D=012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012304030121230123012301230123040301212301230123012301230403012123012301230123012300;CP=0;O;
2015.11.30 22:54:23 4: Found matched Protocol id 16 -> Dooya shutter
2015.11.30 22:54:23 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:25 4: SIGNALduino/msg READ: MS;P0=-5372;P1=-590;P2=402;P3=-265;P4=737;P5=-9928;D=25212343412341234123412341203;CP=2;SP=5;
2015.11.30 22:54:25 4: Found matched Protocol id 14 -> Heidemann HX
2015.11.30 22:54:25 4: SIGNALduino/msg READ: MS;P0=577;P1=-584;P2=-258;P4=-9936;D=0401020201020102010201020102;CP=0;SP=4;
2015.11.30 22:54:25 4: SIGNALduino/msg READ: MU;P0=-1904;P1=578;P2=-247;P4=-574;P5=-9926;D=012121214121412141214121415141212141214121412141214151412121412141214121412141514121214121412141214121415141212141214121412141214151412121412141214121412141514121214121412141214121415141212141214121412141214151412121412141214121412141514120;CP=1;O;
2015.11.30 22:54:25 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:25 4: SIGNALduino/msg READ: MU;P0=731;P1=-269;P2=-596;P3=405;P4=-9236;D=01023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102343231010231023102310231023432310102310231023102310234323101023102310231023102342;CP=3;
2015.11.30 22:54:25 4: Found matched Protocol id 16 -> Dooya shutter
2015.11.30 22:54:25 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:26 4: SIGNALduino/msg READ: MU;P0=572;P1=-582;P2=-268;P4=-9918;D=001020201020102010201020104010202010201020102010201040102020102010201020102010401020201020102010201020104010202010201020102010201040102020102010201020102010401020201020102010201020104010202010201020102010201040102020102010201020102010401020;CP=0;O;
2015.11.30 22:54:26 4: Found matched Protocol id 8 -> TX3 Protocol
2015.11.30 22:54:27 4: SIGNALduino/msg READ: MC;LL=-1014;LH=935;SL=-515;SH=476;D=780278;C=470;
2015.11.30 22:54:27 4: SIGNALduino/msg READ: MU;P0=-168;P1=965;P2=-518;P3=456;P4=-990;P5=124;D=0123234321412323414321414323214141232323432323232323232321432502;CP=3;
2015.11.30 22:54:27 4: Found matched Protocol id 21 -> einhell garagedoor
2015.11.30 22:54:27 4: Found matched Protocol id 16 -> Dooya shutter
2015.11.30 22:54:27 4: Found matched Protocol id 9 -> CTW 600
2015.11.30 22:54:27 4: Found matched Protocol id 8 -> TX3 Protocol
Gruß
Michael
Moin,
Ich fasse mal zusammen.
Am 5. Nobember ging es noch und heute nicht mehr.
Ich werde mal schauen, welche Änderung das bewirkt haben könnte.
Augenscheinlich werden die Daten aber empfangen.
Grüße Sidey
Es kann durchaus sein, das ich was falsch gemacht habe.
Wenn du altere Firmwarestände hast, probiere ich die gerne durch.
Gruss
Michael
Zitat von: Dr.E.Witz am 01 Dezember 2015, 21:14:09
Wenn du altere Firmwarestände hast, probiere ich die gerne durch.
Probier es mal damit:
update force https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/f3ccd7f820b5c18d5b4a632a72161b1d9e187e94/controls_signalduino.txt
Grüße Sidey
Geht wieder :-)
Event monitor:
2015-12-01 23:22:18 SIGNALduino sduino Initialized
2015-12-01 23:22:18 SIGNALduino sduino UNKNOWNCODE r0
2015-12-01 23:22:18 SIGNALduino sduino Initialized
2015-12-01 23:22:31 IT Wohnzimmer_Lampe_Boardlampe on
2015-12-01 23:22:31 DOIF tuerkontakt1 cmd_nr: 1
2015-12-01 23:22:31 DOIF tuerkontakt1 cmd_event: sduino
2015-12-01 23:22:31 DOIF tuerkontakt1 offen
2015-12-01 23:22:31 SIGNALduino sduino Initialized
2015-12-01 23:22:36 IT Wohnzimmer_Lampe_Boardlampe on
2015-12-01 23:22:36 DOIF tuerkontakt1 cmd_nr: 1
2015-12-01 23:22:36 DOIF tuerkontakt1 cmd_event: sduino
2015-12-01 23:22:36 DOIF tuerkontakt1 offen
2015-12-01 23:22:36 SIGNALduino sduino Initialized
2015-12-01 23:22:40 IT Wohnzimmer_Lampe_Boardlampe on
2015-12-01 23:22:40 DOIF tuerkontakt1 cmd_nr: 1
2015-12-01 23:22:40 DOIF tuerkontakt1 cmd_event: sduino
2015-12-01 23:22:40 DOIF tuerkontakt1 offen
2015-12-01 23:22:40 SIGNALduino sduino Initialized
2015-12-01 23:22:40 SIGNALduino sduino Initialized
2015-12-01 23:22:40 IT Wohnzimmer_Lampe_Boardlampe on
2015-12-01 23:22:40 DOIF tuerkontakt1 cmd_nr: 1
2015-12-01 23:22:40 DOIF tuerkontakt1 cmd_event: sduino
2015-12-01 23:22:40 DOIF tuerkontakt1 offen
2015-12-01 23:22:40 SIGNALduino sduino Initialized
2015-12-01 23:22:41 SIGNALduino sduino Initialized
2015-12-01 23:22:41 IT Wohnzimmer_Lampe_Boardlampe on
2015-12-01 23:22:41 DOIF tuerkontakt1 cmd_nr: 1
2015-12-01 23:22:41 DOIF tuerkontakt1 cmd_event: sduino
2015-12-01 23:22:41 DOIF tuerkontakt1 offen
2015-12-01 23:22:41 SIGNALduino sduino Initialized
2015-12-01 23:23:15 SIGNALduino sduino Initialized
2015-12-01 23:23:15 SIGNALduino sduino UNKNOWNCODE r0
2015-12-01 23:23:16 SIGNALduino sduino Initialized
LOG:
2015.12.01 23:24:36 4: SIGNALduino/msg READ: MS;P0=-4020;P1=672;P2=433;P3=-2003;P4=-1024;D=20242424232323242423242424242424242423242411;CP=2;SP=0;
2015.12.01 23:24:36 4: SIGNALduino/msg READ: MS;P0=-1001;P1=464;P2=-1990;P3=-4080;D=1310101012121210101212;CP=1;SP=3;
2015.12.01 23:24:36 4: SIGNALduino/msg READ: MU;P0=171;P1=-999;P2=462;P3=-2009;D=00121212121212321212123232123232323212121212121212102;CP=2;
2015.12.01 23:24:36 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.01 23:24:36 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:24:36 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:24:36 4: SIGNALduino/msg READ: MU;P0=-3096;P1=-1012;P2=450;P3=-1956;D=0121212123232321212321212121212121212321212123232120;CP=2;
2015.12.01 23:24:36 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.01 23:24:36 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:24:37 4: SIGNALduino/msg READ: MU;P0=-202;P1=444;P2=-1781;P3=-1013;P5=852;D=00121213131213131313131313131253131312121312121212131313131313131314;CP=1;
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:24:37 4: SIGNALduino/msg READ: MS;P1=-1740;P2=455;P3=-998;P5=-3896;D=25232323212121232323;CP=2;SP=5;
2015.12.01 23:24:37 4: SIGNALduino/msg READ: MU;P0=-923;P1=-200;P2=526;P4=-1964;D=0120242424202024202020202020202024202020202;CP=2;
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:24:37 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:24:37 4: SIGNALduino/msg READ: MS;P0=-435;P1=469;P2=-1016;P3=-4072;P4=-1978;D=131212121414141212141212121212121212102;CP=1;SP=3;
2015.12.01 23:24:37 4: Founded matched MS Protocol id 1 -> ConradRSL
2015.12.01 23:24:37 4: Decoded matched MS Protocol id 1 dmsg r0 length 4
2015.12.01 23:24:37 3: sduino: Unknown code r0, help me!
2015.12.01 23:24:37 4: SIGNALduino/msg READ: MS;P0=-1744;P1=471;P2=-937;P4=-4028;D=14121212101010121210121212121212121210121212101012101010101212121212121212;CP=1;SP=4;
2015.12.01 23:24:37 4: Founded matched MS Protocol id 1 -> ConradRSL
2015.12.01 23:24:37 4: Decoded matched MS Protocol id 1 dmsg r0 length 4
2015.12.01 23:24:37 4: Dropped (r0) due to short time or equal msg
2015.12.01 23:24:37 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:24:37 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:24:37 4: SD_WS07_Parse SD_WS07 (P7#1C8046F00) length: 9
2015.12.01 23:24:37 3: SD_WS07 converted to bits: 00011100 1 000 000001000110 1111 00000000
2015.12.01 23:24:37 3: SD_WS07_T decoded protocolid: 7 sensor id=1C, channel=1, temp=7, hum=0, bat=ok
2015.12.01 23:25:09 4: SIGNALduino/msg READ: MS;P1=462;P2=-996;P3=-1979;P4=-4052;D=14121212131313121213121212121212121213121212131312131313131212121212121212;CP=1;SP=4;O;
2015.12.01 23:25:09 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:25:09 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:25:09 4: SD_WS07_Parse SD_WS07 (P7#1C8046F00) length: 9
2015.12.01 23:25:09 3: SD_WS07 converted to bits: 00011100 1 000 000001000110 1111 00000000
2015.12.01 23:25:09 3: SD_WS07_T decoded protocolid: 7 sensor id=1C, channel=1, temp=7, hum=0, bat=ok
2015.12.01 23:25:09 4: SIGNALduino/msg READ: MU;P0=-2001;P1=538;P2=-1020;P3=-4040;D=012121212121212121012121210101210101010121212121212121213121212101010121210121212121212121211;CP=1;
2015.12.01 23:25:09 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:25:09 4: decoded matched MU Protocol id 28 dmsg u28#00 length 8
2015.12.01 23:25:09 4: SIGNALduino_unknown incomming msg: u28#00
2015.12.01 23:25:09 4: SIGNALduino_unknown rawData: 00
2015.12.01 23:25:09 4: SIGNALduino_unknown Protocol: 28
2015.12.01 23:25:09 4: SIGNALduino_unknown converted to bits: 00000000
2015.12.01 23:25:09 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:25:10 4: SIGNALduino/msg READ: MS;P1=444;P2=-1005;P3=-2000;P4=-4045;D=14121212131313121213121212121212121213121212131312131313131212121212121212;CP=1;SP=4;O;
2015.12.01 23:25:10 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:25:10 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:25:10 4: SD_WS07_Parse SD_WS07 (P7#1C8046F00) length: 9
2015.12.01 23:25:10 3: SD_WS07 converted to bits: 00011100 1 000 000001000110 1111 00000000
2015.12.01 23:25:10 3: SD_WS07_T decoded protocolid: 7 sensor id=1C, channel=1, temp=7, hum=0, bat=ok
2015.12.01 23:25:10 4: SIGNALduino/msg READ: MS;P0=-1981;P1=448;P2=-1030;P3=-4056;D=13121212101010121210121212121212121210121212101012101010101212121212121212;CP=1;SP=3;O;
2015.12.01 23:25:10 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:25:10 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:25:10 4: Dropped (P7#1C8046F00) due to short time or equal msg
2015.12.01 23:25:10 4: SIGNALduino/msg READ: MS;P0=437;P1=-1038;P2=-4012;P3=-1988;D=02010101030303010103010101010101010103010101030301030303030101010101010101;CP=0;SP=2;
2015.12.01 23:25:10 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:25:10 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:25:10 4: Dropped (P7#1C8046F00) due to short time or equal msg
2015.12.01 23:25:44 4: SIGNALduino/msg READ: MU;P0=-3648;P2=524;P5=-1976;D=202525202525252525202525202025252525252020202023;CP=2;
2015.12.01 23:25:44 4: SIGNALduino/msg READ: MS;P0=547;P1=-3954;P2=-1982;P4=-8588;D=04010101020201020202020201020201010202020202010101;CP=0;SP=4;
2015.12.01 23:25:44 4: Founded matched MS Protocol id 0 -> weather1
2015.12.01 23:25:44 4: Decoded matched MS Protocol id 0 dmsg sE4130700 length 24
2015.12.01 23:25:44 4: SIGNALduino/msg READ: MS;P0=-1558;P1=513;P3=-3966;P5=-8595;D=15131313101013101010101013101013131310101010131313;CP=1;SP=5;O;
2015.12.01 23:25:44 4: Founded matched MS Protocol id 0 -> weather1
2015.12.01 23:25:44 4: Decoded matched MS Protocol id 0 dmsg sE4138700 length 24
2015.12.01 23:25:45 4: SIGNALduino/msg READ: MS;P0=507;P1=-3977;P2=-8611;P4=-1996;D=02010101040401040404040401040401010404040404010101;CP=0;SP=2;O;
2015.12.01 23:25:45 4: Founded matched MS Protocol id 0 -> weather1
2015.12.01 23:25:45 4: Decoded matched MS Protocol id 0 dmsg sE4130700 length 24
2015.12.01 23:25:45 4: SIGNALduino/msg READ: MS;P0=-2008;P1=492;P2=-3989;P4=-8622;D=14121212101012101010101012101012121010101010121212;CP=1;SP=4;O;
2015.12.01 23:25:45 4: Founded matched MS Protocol id 0 -> weather1
2015.12.01 23:25:45 4: Decoded matched MS Protocol id 0 dmsg sE4130700 length 24
2015.12.01 23:25:45 4: Dropped (sE4130700) due to short time or equal msg
2015.12.01 23:25:47 4: SIGNALduino/msg READ: MS;P0=621;P1=-2008;P2=-3991;P4=-8627;D=04020202010102010101010102010102020101010101020202;CP=0;SP=4;
2015.12.01 23:25:51 4: sduino: Get freeram called ...
2015.12.01 23:25:54 1: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9WNVL9L-if00-port0 disconnected, waiting to reappear (sduino)
2015.12.01 23:25:59 3: Setting sduino serial parameters to 57600,8,N,1
2015.12.01 23:25:59 1: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9WNVL9L-if00-port0 reappeared (sduino)
2015.12.01 23:25:59 1: /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9WNVL9L-if00-port0@57600
2015.12.01 23:26:02 2: FRITZBOX FritzBox: Web_OpenCon.4153 Error: No password set. Please define it (once) with 'set FritzBox password YourPassword'
2015.12.01 23:26:02 2: FRITZBOX FritzBox: Readout_Run_Web.1239 Error: Didn't get a session ID
2015.12.01 23:26:06 4: SIGNALduino/msg READ: MS;P0=-1011;P1=672;P2=463;P4=-1977;P5=-4038;D=25202020242424202024202020202020202024201020242420242424242020202020202020;CP=2;SP=5;O;
2015.12.01 23:26:06 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:26:07 4: SIGNALduino/msg READ: MU;P0=555;P1=-991;P2=-1920;P5=-4050;D=010101020202010102010101010101010102010101020201020202020101010101010101050101010202020101020101010101010101020101010202010202020201010101010101010501010102020201010201010101010101010201010102020102020202010101010101010105010101020202010100;CP=0;O;
2015.12.01 23:26:07 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.01 23:26:07 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.01 23:26:07 4: SIGNALduino/msg READ: MS;P1=432;P2=-1986;P3=-1027;P4=-4040;D=14131313121212131312131313131313131310;CP=1;SP=4;
2015.12.01 23:26:07 4: SIGNALduino/msg READ: MS;P0=452;P1=-1009;P4=-4006;P5=-1987;D=04010101050505010105010101010101010105010101050501050505050101010101010101;CP=0;SP=4;O;
2015.12.01 23:26:07 4: Founded matched MS Protocol id 7 -> weatherID7
2015.12.01 23:26:07 4: Decoded matched MS Protocol id 7 dmsg P7#1C8046F00 length 36
2015.12.01 23:26:07 4: SD_WS07_Parse SD_WS07 (P7#1C8046F00) length: 9
2015.12.01 23:26:07 3: SD_WS07 converted to bits: 00011100 1 000 000001000110 1111 00000000
2015.12.01 23:26:07 3: SD_WS07_T decoded protocolid: 7 sensor id=1C, channel=1, temp=7, hum=0, bat=ok
2015.12.01 23:26:27 4: SIGNALduino/msg READ: MC;LL=-2810;LH=3062;SL=-1330;SH=1591;D=00700570;C=1550;
2015.12.01 23:26:27 4: SIGNALduino/msg READ: MC;LL=-2787;LH=3069;SL=-1327;SH=1611;D=00700570;C=1559;
2015.12.01 23:26:57 4: SIGNALduino/msg READ: MU;P0=3075;P1=1368;P2=-2788;P3=-132;P5=-1318;D=12131215151515151515150515121515151515151515020205151211;CP=1;
2015.12.01 23:27:03 4: SIGNALduino/msg READ: MS;P0=824;P1=-775;P2=447;P3=-1994;P5=-4040;D=252121212323232121232121212121212121230121212323210;CP=2;SP=5;
2015.12.01 23:27:03 4: Founded matched MS Protocol id 1 -> ConradRSL
2015.12.01 23:27:03 4: Decoded matched MS Protocol id 1 dmsg r0 length 4
2015.12.01 23:27:03 3: sduino: Unknown code r0, help me!
2015.12.01 23:27:27 4: SIGNALduino/msg READ: MC;LL=-2791;LH=3059;SL=-1346;SH=1611;D=00700570;C=1556;
2015.12.01 23:27:27 4: SIGNALduino/msg READ: MC;LL=-2788;LH=3053;SL=-1346;SH=1596;D=00700570;C=1549;
Klasse!
Wenn ich das richtig interpretiere Empfängt der Signalduino auch jede Menge andere Signale.
Gruß
Michael
Auffällig oft wird der Signalduino initialisiert.
Dann bekommt er natürlich keine Schaltsignale mit.
Z.Zt hängt der Signalduino direkt am Raspi und wird somit vom 2A Netzteil des Raspi versorgt.
Das USB Strommessgerät zeigt an, das ~20 mA fliessen.
Gruss
Michael
Hallo Michael,
Ist das jetzt erst seit dem Downgrade oder tritt das Problem schon länger auf?
Sidey
Das häufige Initialisieren ist mir vorher nicht aufgefallen.
Mein System hat sich dahingehend verändert, da nun ein Rp2 eingesetzt wird.
Auch habe ich nun den besseren Empfänger im Einsatz, da der Einfache kaum "durch die Tür" kam.
Gruss Michael
Nichts, was ich nicht auch habe...
Ich habe weiter drüber nachgedacht und etwas beobachtet...
Events (Filter:.*) [Reset]:
2015-12-02 22:38:50 SIGNALduino sduino Initialized
2015-12-02 22:38:55 SIGNALduino sduino Initialized
2015-12-02 22:38:56 SIGNALduino sduino Initialized
2015.12.02 22:38:55 4: SIGNALduino_unknown incomming msg: u30#FF1
2015.12.02 22:38:55 4: SIGNALduino_unknown rawData: FF1
2015.12.02 22:38:55 4: SIGNALduino_unknown Protocol: 30
2015.12.02 22:38:55 4: SIGNALduino_unknown converted to bits: 111111110001
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:55 4: SIGNALduino/msg READ: MU;P0=684;P1=-304;P2=-644;P3=369;P4=-9931;D=010101010101010232323104310101010101010102323231043101010101010101023232310431010101010101010232323104310101010101010102323231043101010101010101023232310431010101010101010232323104310101010101010102323231043101010101010101023232310431010100;CP=0;O;
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:55 4: SIGNALduino/msg READ: MU;P0=-307;P1=687;P2=-645;P3=372;P4=-9927;D=010101010123232301430101010101010101232323014301010101010101012323230143010101010101010123232301430101010101010101232323014301010101010101012323230143010101010101010123232301430101010101010101232323014301010101010101012323230143010101010100;CP=1;O;
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:55 4: SIGNALduino/msg READ: MU;P0=681;P1=-319;P2=-641;P3=373;P4=-9920;D=010102323231043101010101010101023232310431010101010101010232323104310101010101010102323231043101010101010101023232310431010101010101010232323104310101010101010102323231043101010101010101023232310431010101010101010232323104310101010101010100;CP=0;O;
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:55 4: SIGNALduino/msg READ: MU;P0=-643;P1=360;P2=-306;P3=685;P4=-9920;D=010101234123232323232323230101012341232323232323232301010123412323232323232323010101234123232323232323230101012341232323232323232301010123412323232323232323010101234123232323232323230101012341232323232323232301010123412323232323232323010100;CP=3;O;
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:55 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:55 4: SIGNALduino/msg READ: MU;P0=358;P1=-309;P2=685;P3=-9920;P4=-645;D=01230121212121212121240404012301212121212121212404040123012121212121212124040401230121212121212121240404012301212121212121212404040123012121212121212124040401230121212121212121240404012301212121212121212404040121;CP=2;
2015.12.02 22:38:55 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:56 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:56 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:56 4: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2015.12.02 22:38:56 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: SIGNALduino_unknown incomming msg: u30#FF1
2015.12.02 22:38:56 4: SIGNALduino_unknown rawData: FF1
2015.12.02 22:38:56 4: SIGNALduino_unknown Protocol: 30
2015.12.02 22:38:56 4: SIGNALduino_unknown converted to bits: 111111110001
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: decoded matched MU Protocol id 30 dmsg u30#FF1 length 12
2015.12.02 22:38:56 4: Dropped (u30#FF1) due to short time or equal msg
2015.12.02 22:38:56 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:59 4: SIGNALduino/msg READ: MU;P0=116;P1=-789;P2=909;P4=412;P5=-150;D=01214541412141412121412121414141214121452;CP=4;
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:59 4: SIGNALduino/msg READ: MC;LL=-1033;LH=1092;SL=-531;SH=375;D=AE53974A;C=488;
2015.12.02 22:38:59 4: SIGNALduino/msg READ: MU;P0=-586;P1=431;P3=942;P4=-1030;D=01034301434101034301434341010103014341030101;CP=1;
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 21 -> einhell garagedoor matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 26 -> remote26 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2015.12.02 22:38:59 4: Fingerprint for MU Protocol id 9 -> CTW 600 matches, trying to demodulate
Die Türkontakte haben auch einen "Gehäuse geöffnet Alarm".
Das Werte ich noch nicht aus aber der Signalduino erkennt auch das super!
Das Initialisieren passiert immer nach einem Signal.
Es erscheint nur in der Ereignisanzeige und nicht im Log.
Zumindest die erste Version zeigte gar keine Ereignisse an.
Erst mit dem DoIf ... gab es da auch Meldungen dort.
Nicht aber Ini...
Ich habe den Eindruck, das ein mehrfaches, ggf. abgebrochenes umd neubegonnenes Signal die Ursache ist. Das schnelle Schalten des Kontaktes sorgt für ein wiederholbar es verschlucken.
Ich hab einen 2-Kanal Ossi und könnte da was aufzeichnen, wenn das hilft.
Gruß
Michael
Hallo Michael,
Ich glaube nicht, dass es daran liegt. Ich habe in meinem test. Setup einen 2. Arduino zum senden. Auch, wenn ich den dauerhaft senden lasse, schmiert er nicht ab.
Teste doch mal folgendes:
Pin 2 nicht mit dem receiver, sondern mit gnd verbinden.
Grüße sidey
Hab ich umgelötet.
nun passiert nichts mehr.
--> was ich logisch finde, da ja die Datenleitung weg ist...
Was sollte denn passieren?
Michael
Zitat von: Dr.E.Witz am 03 Dezember 2015, 22:14:31
Was sollte denn passieren?
Kommt das Initalized noch oder läuft er jetzt stabil?
Grüße Sidey
Nach dem Einstecken (USB):
Events (Filter:.*) [Reset]:
2015-12-03 22:26:37 SIGNALduino sduino Initialized
2015-12-03 22:26:37 SIGNALduino sduino CONNECTED
Er läuft dann ohne weitere Meldungen.
Was mir noch aufgefallen ist, wenn der Pin 2 belegt ist, das TX am Arduino immer korrekt blinkt....
Also wenn ich schalte blinkt TX jedesmal.
Michael
Zitat von: Dr.E.Witz am 03 Dezember 2015, 22:27:20
Er läuft dann ohne weitere Meldungen.
Was mir noch aufgefallen ist, wenn der Pin 2 belegt ist, das TX am Arduino immer korrekt blinkt....
Also wenn ich schalte blinkt TX jedesmal.
Hmm, sieht also so aus, als ob es dann doch etwas mit dem Empfang oder der seriellen Übertragung oder mit irgendwas dazwischen zu tun hat.
Grüße Sidey
Wenn ich etwas tun kann...
Gruß
Michael
Hallo Michael,
ich habe einen möglichen Fehler gefunden und behoben.
Ich habe mein Test Arduino jetzt einmal 20 Stunden und dann noch mal 9 Stunden ohne disconnected betrieben.
Probiere doch bitte mal die aktualisierte Firmware im dev-r32 Bereich aus.
Grüße Sidey
Wieder per update force https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/f3ccd7f820b5c18d5b4a632a72161b1d9e187e94/controls_signalduino.txt
Oder soll ich von github das ZIP file mit der ...ino laden und über die Entwicklungsumgebung Flaschen?
Ich bin Anfänger [ heul ], beisse mich da gerne durch, brauch aber die Richtung...
Michael
nein, die aktuell in Entwicklung befindliche Datei bekommst Du via:
update force https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r32/controls_signalduino.txt
Der link erzeugt eine Fehlermeldung
https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r32/controls_signalduino.txt: Can't connect(2) to https://raw.githubusercontent.com:443: SSL Version SSLv2 not supported error:00000000:lib(0):func(0):reason(0)
Die blanke Updatefunktion von fhem aktualisiert ordnungsgemäß.
Sduino Releasedate vom 6.auf den 8.Nov.
Der Pfad/die Datei stimmen, lassen sich im Browser offenen.
Fehlt ein SSL Paket?
Libio-socket-ssl-perl ist installiert und auf Stand.
Ich hab bester versucht sendmail zu installieren....
http://heinz-otto.blogspot.de/2015/02/email-senden-von-fhem-und-raspberrypi.html
Musste leider aus Müdigkeit abbrechen...
Melde mich ...
Michael
Ach, das ist ein Problem im öffnen der Verbindung.... Probiert das Update einfach mit http statt https, dann geht es.
Http ging auch nicht.
Hab die Änderungen rückgängig gemacht und die Software eingespielt
Kein initialisieren mehr...
Super und Danke!
Michael