Hello,
I'm new in the forum so first of all: greetings to All!
I have just configured (http://www.element14.com/community/groups/internet-of-things/blog/2014/06/02/how-to-setup-a-home-automation-server-with-enocean-pi) my first Fhem server using Raspberry Pi 2 and EnOcean Pi module.
I have installed all packages, then finally redirected my serial port (AMA0 --> tty) so I can see my TCM_ESP3 card initialized in Fhem properly now.
Now I', stuck with two general questions:
- Will EnOcean Pi work with eQ-3 MAX! thermostats (http://www.eq-3.de/max-heizungssteuerung-produktdetail-kopie/items/max-heizkoerperthermostat.html)?
- Do I need MAX! Cube LAN gateway (http://www.eq-3.de/max-heizungssteuerung-produktdetail-kopie/items/bc-lgw-o-tw.html), or I can set-up the thermostats without having the MAX! Cube.
How to set-it up to work (attr ... rfmode MAX)?
Thanks for your feedback.
Regards
Bambosz
Zitat von: Bambosz2 am 10 Januar 2016, 12:28:38
Now I', stuck with two general questions:
- Will EnOcean Pi work with eQ-3 MAX! thermostats (http://www.eq-3.de/max-heizungssteuerung-produktdetail-kopie/items/max-heizkoerperthermostat.html)?
I don't think so, they use different protocols at least
Zitat- Do I need MAX! Cube LAN gateway (http://www.eq-3.de/max-heizungssteuerung-produktdetail-kopie/items/bc-lgw-o-tw.html), or I can set-up the thermostats without having the MAX! Cube.
There is a lot of information in the wiki http://www.fhemwiki.de/wiki/MAX (http://www.fhemwiki.de/wiki/MAX) but ready made options seem to be Cube (which I use) or CUL/CUNO
There are further DIY solutions, see many threads in http://forum.fhem.de/index.php/board,17.0.html (http://forum.fhem.de/index.php/board,17.0.html) - and I have an RFBee ready to flash with CUL FW if my Cube fails
Zitat von: fruit am 10 Januar 2016, 15:11:28
I don't think so, they use different protocols at least
Well. Hard to read :(. I think I will not avoid investment in CUL (http://shop.busware.de/product_info.php/cPath/1/products_id/29?osCsid=9793cdfad04d02d4a5357fc234dd8490) anyway - which sounds like the best option here.
Then I have to continue investing in MAX! Cube anyway - to... get rid of it finally :-\.
It looks like the best solution to complete the excercise. Am I correct?
Thanks for your feedback.
Regards
In my experience the Cube has been fine (since autumn 2013) apart from one time when it forgot everything :(
Others have not been so lucky I read.
It is/was the cheapest ready made option I think - and some have successfully flashed the Cube with CUL FW
RFBee is cheap too but requires flashing - search RFBee CULFW.
I'm sure there are other ways, equally as good, that I have missed as well.