Hallo zusammen,
ich habe gerade einen HMW-LC-SW2-DR eingebaut um mein Flurlicht zu schalten.
Das klappt auch mit den angelernten Tastern wunderbar. Allerdings habe ich, wenn ich das Licht über
FHEM schalte, das Phänomen, daß das Licht ab und zu beim Einschalten sofort wieder aus geht.
Wenn ich es dann direkt wieder einschalte bleibt es an.
Hier mal ein List vom HMW-LC-SW2-DR
Internals:
CFGFN
DEF 0000AC56
FW_VERSION 3.06
FailedConfigReads 0
IODev HM485_LAN
MODEL HMW_LC_Sw2_DR
NAME HMW_LC_Sw2_DR_KEQ1056768
NR 284
STATE ACK
TYPE HM485
channel_01 HMW_LC_Sw2_DR_KEQ1056768_01
channel_02 HMW_LC_Sw2_DR_KEQ1056768_02
channel_03 HMW_LC_Sw2_DR_KEQ1056768_03
channel_04 HMW_LC_Sw2_DR_KEQ1056768_04
peer_act_0 channel_01 → HMW_LC_Sw2_DR_KEQ1056768_03
peer_sen_0 channel_03 ← HMW_LC_Sw2_DR_KEQ1056768_01
Readings:
2016-01-25 20:56:07 R-central_address 00000001
2016-01-25 20:56:07 R-logging_time 2.00
2016-01-25 20:13:35 configStatus OK
2016-01-25 21:32:14 state ACK
Cache:
Linkparams:
Actuator:
address_start 855
address_step 6
channel_param channel
channels 01 02
count 28
peer_param actuator
type link
Parameter:
Actuator:
hidden 1
operations none
Logical:
type address
physical:
HASH(0x25a8ea0)
HASH(0x25c4448)
Channel:
hidden 1
operations none
Logical:
default 255
max 255
min 0
type integer
Physical:
interface eeprom
size 1
type integer
Address:
index 0
Sensor:
address_start 15
address_step 28
channel_param channel
channels 03 04
count 30
peer_param sensor
type link
Parameter:
Channel:
hidden 1
operations none
Logical:
default 255
max 255
min 0
type integer
Physical:
interface eeprom
size 1
type integer
Address:
index 5
Long_action_type:
Logical:
type option
option:
HASH(0x2417e08)
HASH(0x2417728)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17
Long_jt_off:
Logical:
type option
option:
HASH(0x24171d0)
HASH(0x2417260)
HASH(0x2417140)
HASH(0x2417128)
HASH(0x24170c8)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.9
Long_jt_offdelay:
Logical:
type option
option:
HASH(0x2416e58)
HASH(0x2416e10)
HASH(0x2416e28)
HASH(0x2416db0)
HASH(0x2416e40)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.6
Long_jt_on:
Logical:
type option
option:
HASH(0x2578e48)
HASH(0x2578c50)
HASH(0x2578d58)
HASH(0x2578c20)
HASH(0x2578bf0)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.3
Long_jt_ondelay:
Logical:
type option
option:
HASH(0x2578968)
HASH(0x25789f8)
HASH(0x2578998)
HASH(0x25788d8)
HASH(0x2578950)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26
Long_multiexecute:
Logical:
default 1
type boolean
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17.2
Long_off_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 16383000
max 982980
min 0
type float
unit s
Special_value:
id not_used
value 16383000
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 24
Long_off_time_mode:
Logical:
type option
option:
HASH(0x267f680)
HASH(0x267f638)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17.6
Long_offdelay_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 0
max 982980
min 0
type float
unit s
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 22
Long_on_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 16383000
max 982980
min 0
type float
unit s
Special_value:
id not_used
value 16383000
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 20
Long_on_time_mode:
Logical:
type option
option:
HASH(0x26794d8)
HASH(0x26795f8)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17.7
Long_ondelay_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 0
max 982980
min 0
type float
unit s
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 18
Long_toggle_use:
Conversion:
type option_integer
Value_map:
1:
device_value 3
from_device 1
parameter_value 0
to_device 1
2:
device_value 2
from_device 1
parameter_value 1
to_device 1
3:
device_value 0
from_device 1
parameter_value 2
to_device 1
Logical:
type option
option:
HASH(0x2676a38)
HASH(0x2676828)
HASH(0x2676750)
Physical:
interface eeprom
size 0.2
type integer
Address:
index 17.4
Sensor:
hidden 1
operations none
Logical:
type address
physical:
HASH(0x26754d8)
HASH(0x26750e8)
Short_action_type:
Logical:
type option
option:
HASH(0x2673858)
HASH(0x2673780)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 6
Short_jt_off:
Logical:
type option
option:
HASH(0x2672dd8)
HASH(0x2672c40)
HASH(0x2672b18)
HASH(0x26729e0)
HASH(0x26728d8)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 15.9
Short_jt_offdelay:
Logical:
type option
option:
HASH(0x2671be8)
HASH(0x26466f8)
HASH(0x2646620)
HASH(0x26465a8)
HASH(0x26463b0)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 15.6
Short_jt_on:
Logical:
type option
option:
HASH(0x26680b8)
HASH(0x2667fc8)
HASH(0x2667f20)
HASH(0x2667cb0)
HASH(0x2667bc0)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 15.3
Short_jt_ondelay:
Logical:
type option
option:
HASH(0x260c9b0)
HASH(0x2624fa8)
HASH(0x26254d0)
HASH(0x2625938)
HASH(0x2626000)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 15
Short_off_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 16383000
max 982980
min 0
type float
unit s
Special_value:
id not_used
value 16383000
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 13
Short_off_time_mode:
Logical:
type option
option:
HASH(0x26a9ab8)
HASH(0x26a9b00)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 6.6
Short_offdelay_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 0
max 982980
min 0
type float
unit s
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 11
Short_on_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 16383000
max 982980
min 0
type float
unit s
Special_value:
id not_used
value 16383000
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 9
Short_on_time_mode:
Logical:
type option
option:
HASH(0x26aa550)
HASH(0x26aa598)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 6.7
Short_ondelay_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 0
max 982980
min 0
type float
unit s
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 7
Short_toggle_use:
Conversion:
type option_integer
Value_map:
1:
device_value 3
from_device 1
parameter_value 0
to_device 1
2:
device_value 2
from_device 1
parameter_value 1
to_device 1
3:
device_value 0
from_device 1
parameter_value 2
to_device 1
Logical:
type option
option:
HASH(0x26aba90)
HASH(0x26abaf0)
HASH(0x26abb38)
Physical:
interface eeprom
size 0.2
type integer
Address:
index 6.4
Ui_hint:
Logical:
default
type string
use_default_on_failure 1
Physical:
id ui_hint
interface store
save_on_change 1
type string
Peered_act:
0:
channel 01
name 0000AC56_03
Peers:
Actuators:
0:
actuator 0000AC56_03
channel 01
Sensors:
0:
channel 03
sensor 0000AC56_01
Attributes:
firmwareVersion 3.06
model HMW_LC_Sw2_DR
room HM485
serialNr KEQ1056768
und vom gepairten Channel01
Internals:
CFGFN
DEF 0000AC56_01
IODev
MODEL HMW_LC_Sw2_DR
NAME HMW_LC_Sw2_DR_KEQ1056768_01
NR 286
PeerList HMW_LC_Sw2_DR_KEQ1056768_03
STATE press_long_2
TYPE HM485
chanNo 01
device HMW_LC_Sw2_DR_KEQ1056768
Readings:
2016-01-25 20:56:07 R-input_locked no
2016-01-25 20:56:07 R-input_type pushbutton
2016-01-25 20:56:07 R-long_press_time 1.00
2016-01-25 21:32:12 press_long 2
2016-01-25 21:32:12 state press_long_2
Devhash:
CFGFN
DEF 0000AC56
FW_VERSION 3.06
FailedConfigReads 0
IODev HM485_LAN
MODEL HMW_LC_Sw2_DR
NAME HMW_LC_Sw2_DR_KEQ1056768
NR 284
STATE ACK
TYPE HM485
channel_01 HMW_LC_Sw2_DR_KEQ1056768_01
channel_02 HMW_LC_Sw2_DR_KEQ1056768_02
channel_03 HMW_LC_Sw2_DR_KEQ1056768_03
channel_04 HMW_LC_Sw2_DR_KEQ1056768_04
peer_act_0 channel_01 → HMW_LC_Sw2_DR_KEQ1056768_03
peer_sen_0 channel_03 ← HMW_LC_Sw2_DR_KEQ1056768_01
Readings:
2016-01-25 20:56:07 R-central_address 00000001
2016-01-25 20:56:07 R-logging_time 2.00
2016-01-25 20:13:35 configStatus OK
2016-01-25 21:32:14 state ACK
Cache:
Linkparams:
Actuator:
address_start 855
address_step 6
channel_param channel
channels 01 02
count 28
peer_param actuator
type link
Parameter:
Actuator:
hidden 1
operations none
Logical:
type address
physical:
HASH(0x25a8ea0)
HASH(0x25c4448)
Channel:
hidden 1
operations none
Logical:
default 255
max 255
min 0
type integer
Physical:
interface eeprom
size 1
type integer
Address:
index 0
Sensor:
address_start 15
address_step 28
channel_param channel
channels 03 04
count 30
peer_param sensor
type link
Parameter:
Channel:
hidden 1
operations none
Logical:
default 255
max 255
min 0
type integer
Physical:
interface eeprom
size 1
type integer
Address:
index 5
Long_action_type:
Logical:
type option
option:
HASH(0x2417e08)
HASH(0x2417728)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17
Long_jt_off:
Logical:
type option
option:
HASH(0x24171d0)
HASH(0x2417260)
HASH(0x2417140)
HASH(0x2417128)
HASH(0x24170c8)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.9
Long_jt_offdelay:
Logical:
type option
option:
HASH(0x2416e58)
HASH(0x2416e10)
HASH(0x2416e28)
HASH(0x2416db0)
HASH(0x2416e40)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.6
Long_jt_on:
Logical:
type option
option:
HASH(0x2578e48)
HASH(0x2578c50)
HASH(0x2578d58)
HASH(0x2578c20)
HASH(0x2578bf0)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26.3
Long_jt_ondelay:
Logical:
type option
option:
HASH(0x2578968)
HASH(0x25789f8)
HASH(0x2578998)
HASH(0x25788d8)
HASH(0x2578950)
Physical:
endian little
interface eeprom
read_size 2
size 0.3
type integer
Address:
index 26
Long_multiexecute:
Logical:
default 1
type boolean
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17.2
Long_off_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 16383000
max 982980
min 0
type float
unit s
Special_value:
id not_used
value 16383000
Physical:
endian little
interface eeprom
size 2
type integer
Address:
index 24
Long_off_time_mode:
Logical:
type option
option:
HASH(0x267f680)
HASH(0x267f638)
Physical:
interface eeprom
size 0.1
type integer
Address:
index 17.6
Long_offdelay_time:
Conversion:
1:
factors 0.1,1,60,1000
type float_configtime
value_size 1.6
2:
type integer_integer_map
Value_map:
device_value 49152
mask 49152
parameter_value 65535
Logical:
default 0
max 982980
min 0
type float
unit s
Physical:
endian little
interface eeprom
size 2
Gruß
Hi,
mit welchem Befehl schaltest Du denn das Licht?
Gruß,
Thorsten
Hallo Thorsten,
ich habe in der fhem.cfg
attr HMW_LC_Sw2_DR_KEQ1056768_03 devStateIcon on:general_an off:general_aus set_on:general_an_fuer_zeit set_off:general_aus_fuer_zeit
definiert.
Das Verhalten habe ich auch wenn ich direkt mit set <device> on schalte.
Hier nochmal die Definitionen in der fhem.cfg
define HMW_LC_Sw2_DR_KEQ1056768 HM485 0000AC56
attr HMW_LC_Sw2_DR_KEQ1056768 firmwareVersion 3.06
attr HMW_LC_Sw2_DR_KEQ1056768 model HMW_LC_Sw2_DR
attr HMW_LC_Sw2_DR_KEQ1056768 room HM485
attr HMW_LC_Sw2_DR_KEQ1056768 serialNr KEQ1056768
define FileLog_HMW_LC_Sw2_DR_KEQ1056768 FileLog ./log/HMW_LC_Sw2_DR_KEQ1056768-%Y-%m-%d.log HMW_LC_Sw2_DR_KEQ1056768
attr FileLog_HMW_LC_Sw2_DR_KEQ1056768 archivedir ./log_archive/
attr FileLog_HMW_LC_Sw2_DR_KEQ1056768 logtype text
attr FileLog_HMW_LC_Sw2_DR_KEQ1056768 nrarchive 5
attr FileLog_HMW_LC_Sw2_DR_KEQ1056768 room Logfiles
define HMW_LC_Sw2_DR_KEQ1056768_01 HM485 0000AC56_01
attr HMW_LC_Sw2_DR_KEQ1056768_01 model HMW_LC_Sw2_DR
attr HMW_LC_Sw2_DR_KEQ1056768_01 room HM485
attr HMW_LC_Sw2_DR_KEQ1056768_01 subType key
define HMW_LC_Sw2_DR_KEQ1056768_02 HM485 0000AC56_02
attr HMW_LC_Sw2_DR_KEQ1056768_02 model HMW_LC_Sw2_DR
attr HMW_LC_Sw2_DR_KEQ1056768_02 room HM485
attr HMW_LC_Sw2_DR_KEQ1056768_02 subType key
define HMW_LC_Sw2_DR_KEQ1056768_03 HM485 0000AC56_03
attr HMW_LC_Sw2_DR_KEQ1056768_03 userattr fp_Grundriss.image lampe.{state}.png
attr HMW_LC_Sw2_DR_KEQ1056768_03 alias Licht Flur
attr HMW_LC_Sw2_DR_KEQ1056768_03 devStateIcon on:general_an off:general_aus set_on:general_an_fuer_zeit set_off:general_aus_fuer_zeit
attr HMW_LC_Sw2_DR_KEQ1056768_03 fp_Erdgeschoss 532,476,0,,
attr HMW_LC_Sw2_DR_KEQ1056768_03 group Licht
attr HMW_LC_Sw2_DR_KEQ1056768_03 icon light_downlight
attr HMW_LC_Sw2_DR_KEQ1056768_03 model HMW_LC_Sw2_DR
attr HMW_LC_Sw2_DR_KEQ1056768_03 room 01.00 EG,HM485
attr HMW_LC_Sw2_DR_KEQ1056768_03 subType switch
define HMW_LC_Sw2_DR_KEQ1056768_04 HM485 0000AC56_04
attr HMW_LC_Sw2_DR_KEQ1056768_04 model HMW_LC_Sw2_DR
attr HMW_LC_Sw2_DR_KEQ1056768_04 room HM485
attr HMW_LC_Sw2_DR_KEQ1056768_04 subType switch
Gruß
Lars
Hi,
tja, da fällt mir nichts seltsames auf. ...und die aktuellste Version hast Du wohl auch, erkennbar am Internal FailedConfigReads.
Tja, da müssen wir etwas weiter forschen. Schalte mal das Attribut verbose am Device HMW_LC_Sw2_DR_KEQ1056768 auf 5 und mach dann ein "set <device> on". Wenn das Problem dann auftritt würde mich der entsprechende Ausschnitt aus dem Logfile interessieren.
Gruß,
Thorsten
Es gab beim hm-lc-sw1pbu-fm wohl mal ein problem mit defekten ElKo auf der Platine.
Ich hatte auch schon so einen, der sofort wieder ausgeschaltet hat. Hat ELV getauscht.
Evtl ein verlgleichbares Problem?
@micromat
Mit den gepairten Tastern schaltet er ja ohne Probleme. Nur via FHEM geht es sofort wieder aus.
Beim 2. manchmal auch erst beim 3. mal bleibt das Licht dann an.
@Thorsten
Hier mal das Log:
1. Versuch -> Licht geht direkt wieder aus
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_SendCommand: 7802C8
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_DoSendCommand: hmwId = 0000AC56 data = 7802C8 requestId = 31
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 200
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 1
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 6902C800 actionType = response
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 61
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 61
2016.01.26 10:45:28 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000F7 actionType = frame
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000F7 actionType = frame
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 0
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 69020000 actionType = frame
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000F7 actionType = frame
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 61
2016.01.26 10:45:29 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000F7 actionType = frame
2016.01.26 10:45:30 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 61
2016.01.26 10:45:30 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 61
2016.01.26 10:45:30 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000F7 actionType = frame
2016.01.26 10:45:30 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 No channel
2016.01.26 10:45:31 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:45:31 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:45:31 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 0
2016.01.26 10:45:31 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:45:31 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 69020000 actionType = frame
2.Versuch -> Licht geht direkt wieder aus
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_SendCommand: 7802C8
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_DoSendCommand: hmwId = 0000AC56 data = 7802C8 requestId = 36
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 200
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 1
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 6902C800 actionType = response
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 62
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 62
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000FB actionType = frame
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 62
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 62
2016.01.26 10:47:03 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000FB actionType = frame
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 0
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 69020000 actionType = frame
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000FB actionType = frame
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000FB actionType = frame
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = counter value1 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 62
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 01 msgData = 4B0000FB actionType = frame
2016.01.26 10:47:04 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 No channel
2016.01.26 10:47:05 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:47:05 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:05 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 0
2016.01.26 10:47:05 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:05 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 69020000 actionType = frame
3. Versuch -> Licht bleibt an
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_SendCommand: 7802C8
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_DoSendCommand: hmwId = 0000AC56 data = 7802C8 requestId = 37
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 200
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 1
2016.01.26 10:47:09 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 6902C800 actionType = response
2016.01.26 10:47:10 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state_flags value1 = 0
2016.01.26 10:47:10 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 0
2016.01.26 10:47:10 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: deviceKey = HMW_LC_SW2_DR valId = state value1 = 200
2016.01.26 10:47:10 5: HMW_LC_Sw2_DR_KEQ1056768: Device:convertFrameDataToValue: value2 = 1
2016.01.26 10:47:10 5: HMW_LC_Sw2_DR_KEQ1056768: HM485_ProcessChannelState: hmwId = 0000AC56 Channel = 03 msgData = 6902C800 actionType = frame
Gruß
Lars
Hi,
ich kann bei den ersten beiden Beispielen sehen, dass das Device "glaubt", dass nach dem Schalten nochmal die Taste des Kanals 01 gedrückt wurde. Das sehe ich daran, dass ein 4B0000F7 zurück geschickt wird. Dabei deutet das letzte gesetzte Bit sogar auf einen langen Tastendruck hin.
Da liegt es tatsächlich nahe, dass es sich hier um ein elektrisches Problem handelt. Möglicherweise gibt es durch das Schalten irgendwo einen Kurzschluss am Tastereingang. Wenn Du über die Taste selbst schaltest, dann ist das egal, da die Taste ja sowieso gedrückt ist.
Ich würde empfehlen, mal alle elektrischen Verbindungen zu überprüfen. Wenn das nicht hilft, dann wirklich mal das Teil austauschen.
Gruß,
Thorsten
Hallo Thorsten,
scheint tatsächlich ein elektrisches / Verkabelungsproblem zu sein.
Da muss ich mir meine Verkabelung wohl nochmal in Ruhe anschauen...
Trotzdem vielen Dank für die schnelle Fehleranalyse und Hilfe.
Gruß
Lars
Hört sich sehr nach defekten Elkos an .....