Hallo,
ich versuche set Thermostat_Balkon_Clima regSet winOpnMode off zu setzen bekomme aber immer die Meldung
cannot calculate value. Please issue set Thermostat_Balkon_Clima getConfig first - invalid
Hat einer von Euch vielleicht Idee dazu :-[
Dann mach doch was dir fhem mitteilt.
Zitat von: hasilein am 06 Februar 2016, 11:08:43
cannot calculate value. Please issue set Thermostat_Balkon_Clima getConfig first
Hab ich 8)
aber keine Änderung
Hab das gleiche bei einem anderen durchgeführt aber mit dem gleichen Ergebnis
Wurde das getconfig vom Device auch ohne Fehler abgearbeitet?
Ja also keine Fehlermeldung
Siehst du das Register überhaupt in fhem? Falls nicht, im Device das Attribut expert hochsetzen.
Welches Register meinst Du denn?
bzw. wo finde ich das
Na, das welches du andern willst.
ich hab das Attribut expert auf 1 und auf 2_full gesetzt
und das ganze nochmal durchgeführt aber leider nix
Dein FHEM ist nicht aktuell.
hatte ich gedacht hab diese jetzt aktualisiert aber nichts geholfen
Zeige mal ein list von Thermostat_Balkon und Thermostat_Balkon_Clima
Thermostat_Balkon_Clima
list: register | range | peer | description
1: sign | literal | | signature (AES) options:on,off
7: boostPeriod | literalmin | | boost period [min] options:25,0,30,10,20,15,5
7: boostPos | 0 to 100% | | valve boost position
7: btnNoBckLight | literal | | button response without backlight options:on,off
7: dayTemp | 15 to 30C | | comfort or day temperatur
7: daylightSaveTime | literal | | set daylight saving time options:on,off
7: decalcTime | 0 to 1410 | | decalc at hour
7: decalcWeekday | literal | | decalc at day options:Mon,Tue,Fri,Wed,Thu,Sun,Sat
7: modePrioManu | literal | | allow tempChange for manual only by: options:CCU,RT_TC_CCU_SELF,self,RT_TC_SC_SELF,all
7: modePrioParty | literal | | allow tempChange for party only by: options:CCU,RT_TC_CCU_SELF,self,RT_TC_SC_SELF,all
7: nightTemp | 5 to 25C | | lower or night temperatur
7: noMinMax4Manu | literal | | min/max is irrelevant for manual mode options:on,off
7: regAdaptive | literal | | adaptive regu on or off with default or determined values options:on,offDeter,offDefault
7: reguExtI | 10 to 20 | | regulator I-param extern mode
7: reguExtP | 25 to 35 | | regulator P-param extern mode
7: reguExtPstart | 5 to 45 | | regulator P-param extern mode start value
7: reguIntI | 10 to 20 | | regulator I-param internal mode
7: reguIntP | 25 to 35 | | regulator P-param internal mode
7: reguIntPstart | 5 to 45 | | regulator P-param internal mode start value
7: showInfo | literal | | show date or time options:date,time
7: showWeekday | literal | | show weekday options:on,off
7: tempMax | 15 to 30.5C | | maximum temperatur
7: tempMin | 4.5 to 14.5C | | minimum temperatur
7: tempOffset | literal | | temperature offset options:-2.5K,2.0K,1.0K,2.5K,-3.5K,-1.5K,0.0K,3.0K,1.5K,0.5K,-2.0K,-0.5K,3.5K,-3.0K,-1.0K
7: valveErrPos | 0 to 100% | | valve error position
7: valveMaxPos | 0 to 100% | | valve maximum position
7: valveOffsetRt | 0 to 100% | | offset for valve
7: winOpnBoost | literal | | boost after window closed options:on,off
7: winOpnDetFall | 0.5 to 2.5K | | detect Window Open if temp falls more then...
7: winOpnMode | literal | | enable internal Window open in modes: options:on,auto,auto_party,auto_manu,off
7: winOpnPeriod | 0 to 60min | | period lowering when window is open
7: winOpnTemp | 5 to 30C | | lowering temp when Window is opened
Thermostat_Balkon
0: backOnTime | 0 to 255s | | Backlight On Time
0: btnLock | literal | | Button Lock options:on,off
0: burstRx | literal | | device reacts on Burst options:on,off
0: cyclicInfoMsg | literal | | cyclic message options:on_100,on,off
0: cyclicInfoMsgDis | 0 to 255 | | cyclic message
0: globalBtnLock | literal | | global button lock options:on,off
0: localResDis | literal | | local reset disable options:on,off
0: lowBatLimitRT | 2 to 2.5V | | low batterie limit, step .1V
0: modusBtnLock | literal | | mode button lock options:on,off
0: pairCentral | 0 to 16777215 | | pairing to central
Das meinte ich nicht, in der Eingabezeile:
list Thermostat_Balkon
bzw.
list Thermostat_Balkon_Clima
eingeben.
Internals:
DEF 3B10BF
IODev CUL1
NAME Thermostat_Balkon
NR 85
NTFY_ORDER 50-Thermostat_Balkon
STATE CMDs_pending
TYPE CUL_HM
channel_01 Thermostat_Balkon_Weather
channel_02 Thermostat_Balkon_Climate
channel_03 Thermostat_Balkon_WindowRec
channel_04 Thermostat_Balkon_Clima
channel_05 Thermostat_Balkon_ClimaTeam
channel_06 Thermostat_Balkon_remote
protCmdPend 62 CMDs_pending
protState CMDs_pending
Readings:
2016-02-06 21:50:20 Activity dead
2015-11-10 21:58:48 D-firmware 1.4
2015-11-10 21:58:48 D-serialNr MEQ0450853
2016-02-06 10:09:25 R-burstRx set_on
2015-11-18 22:10:42 powerOn 2015-11-18 22:10:42
2015-11-18 22:10:42 recentStateType info
2016-02-06 21:41:05 state CMDs_pending
cmdStack:
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF00040000000000
++A001F112343B10BF0103
++A001F112343B10BF01040000000001
++A001F112343B10BF0203
++A001F112343B10BF02040000000001
++A001F112343B10BF0303
++A001F112343B10BF03040000000001
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF0503
++A001F112343B10BF05040000000001
++A001F112343B10BF0603
++A001F112343B10BF06040000000001
++A001F112343B10BF00040000000000
++A001F112343B10BF0103
++A001F112343B10BF01040000000001
++A001F112343B10BF0203
++A001F112343B10BF02040000000001
++A001F112343B10BF0303
++A001F112343B10BF03040000000001
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF0503
++A001F112343B10BF05040000000001
++A001F112343B10BF0603
++A001F112343B10BF06040000000001
++A001F112343B10BF00040000000000
++A001F112343B10BF0103
++A001F112343B10BF01040000000001
++A001F112343B10BF0203
++A001F112343B10BF02040000000001
++A001F112343B10BF0303
++A001F112343B10BF03040000000001
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF0503
++A001F112343B10BF05040000000001
++A001F112343B10BF0603
++A001F112343B10BF06040000000001
++A001F112343B10BF00040000000000
++A001F112343B10BF0103
++A001F112343B10BF01040000000001
++A001F112343B10BF0203
++A001F112343B10BF02040000000001
++A001F112343B10BF0303
++A001F112343B10BF03040000000001
++A001F112343B10BF0403
++A001F112343B10BF04040000000001
++A001F112343B10BF00040000000007
++A001F112343B10BF0503
++A001F112343B10BF05040000000001
++A001F112343B10BF0603
++A001F112343B10BF06040000000001
Helper:
HM_CMDNR 1
mId 0095
rxType 140
Expert:
def 1
det 1
raw 0
tpl 0
Io:
newChn +3B10BF,02,00,00
prefIO
rxt 2
vccu
p:
3B10BF
00
00
00
Mrssi:
mNo
Prt:
bErr 0
sProc 2
Q:
qReqConf
qReqStat
Role:
dev 1
prs 1
Shregw:
07 04
Attributes:
IODev CUL1
actCycle 000:10
actStatus dead
autoReadReg 4_reqStatus
expert 1
firmware 1.4
model HM-CC-RT-DN
room CUL_HM
serialNr MEQ0450853
subType thermostat
webCmd getConfig:clear msgEvents:burstXmit
Internals:
DEF 3B10BF04
NAME Thermostat_Balkon_Clima
NR 91
NTFY_ORDER 50-Thermostat_Balkon_Clima
STATE ???
TYPE CUL_HM
chanNo 04
device Thermostat_Balkon
Readings:
Helper:
getCfgListNo
Expert:
def 1
det 1
raw 0
tpl 0
Role:
chn 1
Shregr:
07 00
Attributes:
expert 1_allReg
model HM-CC-RT-DN
Zitat von: hasilein am 06 Februar 2016, 22:23:46
Internals:
STATE CMDs_pending
TYPE CUL_HM
protCmdPend 62 CMDs_pending
protState CMDs_pending
2016-02-06 21:41:05 state CMDs_pending
Attributes:
IODev CUL1
actCycle 000:10
actStatus dead
autoReadReg 4_reqStatus
expert 1
Internals:
DEF 3B10BF04
NAME Thermostat_Balkon_Clima
NR 91
NTFY_ORDER 50-Thermostat_Balkon_Clima
STATE ???
TYPE CUL_HM
chanNo 04
device Thermostat_Balkon
Readings:
Helper:
getCfgListNo
Expert:
def 1
det 1
raw 0
tpl 0
Role:
chn 1
Shregr:
07 00
Attributes:
expert 1_allReg
model HM-CC-RT-DN
Da scheint bei dir etwas mit der Kommunikation zu klemmen 62 Cmd_pending.
Dein getconfig und andere Befehle wurden noch nicht abgearbeitet.
stromer on tour
Ist der überhaupt gepairt?
Stimmt, wo du es sagst. Das fehlt auch.
stromer on tour
Also hab das Thermostat nochmal gelöscht und dann nochmal gepairt mit fhem
und siehe da nun geht es.
Ich denke es hatte auch damit zu tun das die Version die ich hatte veraltet war
Ich dank Euch für Eure Unterstützung noch einen schönen Sonntag
;D