Seit gestern etwa geht folgendes ab:
FHEM sendet permanent im 2-3 Sekundentakt das Ausschaltensignal über "send" zu meinen Steckdosen.
Kurze Offtime und alles half nichts. Jemand eine Idee was das sein kann?
Zitat2016.02.08 07:41:02 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:04 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:06 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:09 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:11 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:13 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:15 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:17 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:19 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:21 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:23 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
2016.02.08 07:41:25 3: off_Lampe return value: -1
sending systemCode[00010] unitCode[1] command[0]
Abgesehen davon das ich sich kein Licht mehr einschalten lässt, will/kann mein Cube schon nicht mehr senden :(
Zitat2016.02.08 07:33:43 2: CUL_MAX_SendQueueHandler: Not enough credit! credit10ms is 2, but we need 110. Waiting 108 seconds.