Ich bin gerade dabei testweise verschiedene Protokolle auf dieser
neuen Hardware zu implementieren:
http://web.mac.com/tostmann/iWeb/Web-Site/Home/786F2F8B-693A -11DD-9CFA-001124368D6A.html
FS20 und FHT laufen schon. Für EM liegt eine Doc vor.
Nur für Luft-protokolle HMS und KS konnte ich nix finden. Ist Google
kaputt?
Wer kann helfen?
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
Originally posted by: <email address deleted>
Hi,
TOSTi:
> FS20 und FHT laufen schon. Für EM liegt eine Doc vor.
>
Habe ich auch schon implementiert ;-)
> Nur für Luft-protokolle HMS und KS konnte ich nix finden. Ist Google
> kaputt?
>
Ich habe für den RM100-Rauchmelder (beim Nürnberger Conrad heute
gesehen, leider für 29.90 :-( ) auch noch nichts gefunden.
Da wird jemand wohl reverse-engineeren müssen. :-/
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | smurf@smurf.noris.de
Disclaimer: The quote was selected randomly. Really. | http://smurf.noris.de
- -
I'm encased in the lining of a pure pork sausage!!
-- Zippy the Pinhead
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
Originally posted by: <email address deleted>
On Aug 14, 1:39 am, Matthias Urlichs wrote:
>
> Da wird jemand wohl reverse-engineeren müssen. :-/
>
Hallo, ich habe mich mal mit RM100BiDi beschäftigt, hier meine
Aufzeichungen:
-----8<----*schnipp*---------8<----*schnipp*-----8<----*schnipp*----
Basiert mal wieder auf FS20
Unterschiede:
nur 8* NULL als Sync
EINS = 1,5 ms Impuls-Dauer
NULL = 1,0 ms Implus-Dauer
Sendepause = 2,5 ms
Byte Parität: ungerade = 1
Funk Telegramme:
-----------
Beispiel:
00000000|1|0100:0000|1|0101:0100|1|0
sync |S| 1. Byte |P| 2. Byte |P|E
S= Startbit immer 1
P= Paritätsbit
E= Endebit
Im Alarmfall werden sie ~ 8,5 Sec. kontinuierlich gesendet.
Beim Auslösen über die Testtaste (weiße LED an) kommt das erste
Telegram zb. wie folgt:
016 036 der zweite Wert ist immer Wert 1 + 20
Das nächste Telegramm folgt genau 30 später, wobei die LED verlöscht.
016 216 also ist der zweite Wert ist immer Wert 1 + 200 (bei Überlauf
mit 256 verundet).
Fazit: RM100BiDi blockiert im Alarmfall das 868MHz-Band und blockiert
somit FS20 im Alarmfall.
Hauscode/Jumpersetting:
AL EIN AL AUS Weitere Alarme analog
J1 J2 J3 J4 V1 V2 V3 V4
1 1 1 1 016 036 016 216 032 048 064 080 096 112 128 144 160
176 192 208 224 240 000
0 1 1 1 017 037 017 237 033 053 049 249
1 0 1 1 018 038 018 238
0 0 1 1 019 039
1 1 0 1 020 040
0 1 0 1 021 041
1 0 0 1 022 042
0 0 0 1 023 043
1 1 1 0 024 044
0 1 1 0 025 045
1 0 1 0 026 046
0 0 1 0 027 047
1 1 0 0 028 048
0 1 0 0 029 049
1 0 0 0 030 050
0 0 0 0 031 051 031 231
-----8<----*schnipp*---------8<----*schnipp*-----8<----*schnipp*----
Ich hoffe jemand kann es gebrauchen....
Gruß
sweetie-pie
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
Originally posted by: <email address deleted>
Hi,
sweetie-pie:
> Hallo, ich habe mich mal mit RM100BiDi beschäftigt, hier meine
> Aufzeichungen:
>
Danke.
> Basiert mal wieder auf FS20
... mit den üblichen inkompatiblen Änderungen im Sendeprotokoll.
Ich frag mich manchmal, was die Leute rauchen, wenn sie (wiedermal) an
den Parametern rumbasteln.
> Im Alarmfall werden sie ~ 8,5 Sec. kontinuierlich gesendet.
> Fazit: RM100BiDi blockiert im Alarmfall das 868MHz-Band und blockiert
> somit FS20 im Alarmfall.
8.5sec kann man zum Glück noch einigermaßen verkraften; mein Sende-Code
wartet bisher ohne Timeout auf eine Funklücke.
> Ich hoffe jemand kann es gebrauchen....
>
Danke!
--
Matthias Urlichs | {M:U} IT Design @ m-u-it.de | smurf@smurf.noris.de
Disclaimer: Das Zitat wurde zufällig ausgewählt. | http://smurf.noris.de
- -
Wir fordern: Sofortige Aufhebung des Scheißwetters.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-