To the authors of fhem modules:
I reorganized the commandref.html so that each module is now described
in one block. Up till now they were scattered to define/get/set/
attribute.
Could you please check "your" module? A short description at the head
of each module would be nice.
Special request goes to the authors of 00_LIRC and 86_FS10: there is
no documentation at all, please change it.
Rudi
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
Originally posted by: <email address deleted>
Hi Rudi,
hatte ein FHEMRENDERER-Readme ins CVS geschoben.
Da wurde das auch für das FHEMRENDERER Device erklärt.
Willst Du das mit einpflegen ?
Danke,
gruß,
Olaf
Rudolf Koenig schrieb:
> To the authors of fhem modules:
>
> I reorganized the commandref.html so that each module is now described
> in one block. Up till now they were scattered to define/get/set/
> attribute.
>
> Could you please check "your" module? A short description at the head
> of each module would be nice.
> Special request goes to the authors of 00_LIRC and 86_FS10: there is
> no documentation at all, please change it.
>
> Rudi
> >
>
--
------------------------------------------------------------ ------------
Dr. Olaf Droegehorn
General Manager Tel. : +49-561-82020-410
DHS - Computertechnik GmbH Fax. : +49-561-82020-399
Carlsdorfer Straße 3 E-Mail: O.Droegehorn@dhs-computertechnik.de
WEB: www.dhs-computertechnik.de
D-34128 Kassel
------------------------------------------------------------ ------------
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
> Willst Du das mit einpflegen ?
Nein, ich finde das ist Deine Baustelle. :-)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
Hi Rudi,
today I tried the point 16 out of the FAQ ("Setting auto-mode from
manual for the FHT ").
Is it only made for the current version 4.4 of FHEM?
In my version (4.1) it created a bunch of "Unknown command $r, try
help"?!
Rgds,
Jürgen
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-
> In my version (4.1) it created a bunch of "Unknown command $r, try
> help"?!
I'm afraid the "\" feature was not yet implemented in 4.1: you have
to put everything on a single line and remove all backslash characters.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "FHZ1000 users on Linux" group.
To post to this group, send email to FHZ1000-users-on-unix@googlegroups.com
To unsubscribe from this group, send email to FHZ1000-users-on-unix+unsubscribe@googlegroups.com
For more options, visit this group at http://groups.google.com/group/FHZ1000-users-on-unix?hl=en
-~----------~----~----~----~------~----~------~--~-