Ich habe folgendes im logfile
2016.07.30 17:53:07 1: define Display FRAMEBUFFER /dev/fb1: /dev/fb1 isn't readable and writable
2016.07.30 17:53:07 1: Including ./log/fhem.save
2016.07.30 17:53:07 1: configfile: 0
I2C: Error! I2C device not readable: /dev/i2c-1. Please install wiringpi or change access rights for fhem user
Luminosity: unknown IODev specified
/dev/fb1 isn't readable and writable
/dev/fb1 isn't readable and writable
Unknown command system("/usr/local/bin/gpio, try help.
2016.07.30 17:53:07 3: No I/O device found for Luminosity
2016.07.30 17:53:09 1: OWX: 1-Wire bus OWio: interface DS2482 / COC detected in CUL868 with response OK
V 1.61 RPIAddOn_CSM
2016.07.30 17:53:09 1: usb create starting
2016.07.30 17:53:10 1: usb create end
2016.07.30 17:53:10 2: Error messages while initializing FHEM: configfile: 0 I2C: Error! I2C device not readable: /dev/i2c-1. Please install wiringpi or change access rights for fhem user Luminosity: unknown IODev specified /dev/fb1 isn't readable and writable /dev/fb1 isn't readable and writable Unknown command system("/usr/local/bin/gpio, try help.
2016.07.30 17:53:10 0: Featurelevel: 5.7
2016.07.30 17:53:10 0: Server started with 20 defined entities (version $Id: fhem.pl 9893 2015-11-15 08:43:05Z rudolfkoenig $, os linux, user fhem, pid 646)
2016.07.30 17:53:10 1: Pressure: Can't call method "bus_read" on an undefined value
2016.07.30 17:53:10 1: Luminosity: no IODev assigned to 'Luminosity'
2016.07.30 17:53:10 1: Luminosity: no IODev assigned to 'Luminosity'
2016.07.30 17:53:10 1: PERL WARNING: Use of uninitialized value in multiplication (*) at ./FHEM/51_I2C_TSL2561.pm line 574.
2016.07.30 17:53:10 1: PERL WARNING: Use of uninitialized value in multiplication (*) at ./FHEM/51_I2C_TSL2561.pm line 575.
2016.07.30 17:53:23 1: OWX: No answer to CUL868 device search
2016.07.30 17:53:23 1: OWX: 1-Wire devices found on bus OWio ()
ich bin nach der Kurzanleitung für das addonboard von locutus vorgegangen.
ich habe kein /dev/fb1 nur ein /dev/fb0
Please install wiringpi or change access rights for fhem user
wiringpi ist nach der Anleitung installiert muss ich jetzt noch per Hand die Rechte ändern?
2. Problem
sudo crontab -e
gibt folgende Meldung
no crontab for root - using an empty one
888
ich kann dann nichts eingeben und komme aus diesem Zustand nicht mehr heraus.
Nur Versorgungsspannung weg hilft da.