Moin.
Habe gestern endlich mal meinen Pi Zero eingerichtet.
Ich möchte mir mit SYSMON einige Werte per telnet holen... Einige Aufregung wegen Telnet gehabt, aber läuft. Verbindung ist da.
Nur bekomme ich keine Werte: list
Internals:
DEF telnet:USER@IP 1 1 1 0
HOST IP
INTERVAL_BASE 60
INTERVAL_MULTIPLIERS 1 1 1 0
MODE telnet
NAME rpi_sys_garage
NR 196
PORT 23
STATE Active
TYPE SYSMON
USER USER
Readings:
2016-09-18 21:18:50 cpu_core_count 1
2016-09-19 18:03:07 eth0 not available
2016-09-19 18:03:07 eth0_diff not available
2016-09-19 18:03:07 ram n/a
2016-09-19 18:03:07 ram_used_stat 0.00 0.00 0.00
2016-09-19 18:03:07 swap n/a
2016-09-19 18:03:07 swap_used_stat 0.00 0.00 0.00
2016-09-19 18:03:07 wlan0 not available
2016-09-19 18:03:07 wlan0_diff not available
Excludes:
cpucount 1
cpufreq 1
cpuinfo 1
diskstat 1
fbdecttemp 1
fbdsl 1
fbnewmessages 1
fbnightctrl 1
fbversion 1
fbwlan 1
filesystem 1
Attributes:
event-on-update-reading cpu_temp,cpu_temp_avg,cpu_temp_stat,loadavg,uptime_text,stat_cpu_text,wlan0,ram
exclude cpucount, cpufreq, cpuinfo, diskstat, filesystem, fbwlan, fbnightctrl, fbnewmessages, fbdecttemp, fbversion, fbdsl
group Hardware
network-interfaces wlan0:wlan0:WiFi,eth0:eth0:Ethernet
nonblocking 1
room Draußen
IP, USER und natürlich auch das "password" sind richtig gesetzt.
Linux Raspbian Jessie Lite. genau das gleiche wie auf meinen anderen beiden Pi's und bei denen klappt es ohne Probleme. Einer local und einer via Telnet.
Woran könnte es nun also liegen?
Danke schonmal im Vorraus
Grüße^^