Moin,
ich bekomme zwar Daten vom Thermostat aber er reagiert nicht auf Befehle aus FHEM.
Die Befehle gehen lt. Log raus, genügend Credits sind vorhanden. Betriebsart manu und auto probiert.
Wie kriege ich am einfachsten raus ob der CUL überhaupt sendet?
Nachtrag: Das Einbinden in FHEM ging recht fix, der Countdown am Thermostat lief nur wenige Sekunden runter dann kam die Meldung "Ac", die ich als "accepted" interpretiere, das Antennensymbol ist dauerhaft im Display. Also sollte imho eigentlich alles paletti sein, richtig?
Mein CUL: Internals:
CUL0_MSGCNT 33
CUL0_RAWMSG Z0F0004601394160000000019001900B6
CUL0_RSSI -50
CUL0_TIME 2016-11-24 12:00:31
CULMAX0_MSGCNT 9
CULMAX0_TIME 2016-11-24 11:10:33
DEF 123456
IODev CUL0
LASTInputDev CUL0
MSGCNT 42
NAME CULMAX0
NR 144
STATE Defined
TYPE CUL_MAX
addr 123456
cnt 0
pairmode 0
retryCount 0
Readings:
2016-09-21 02:06:23 packetsLost 19
sendQueue:
Attributes:
IODev CUL0
room CUL_MAX
Mein Thermostat: Internals:
CULMAX0_MSGCNT 7
CULMAX0_TIME 2016-11-24 12:00:31
CULMAX_MSGCNT 6
CULMAX_TIME 2016-11-24 12:31:54
DEF HeatingThermostat 139416
IODev CULMAX
LASTInputDev CULMAX
MSGCNT 13
NAME Hzg.Kueche
NR 227
RSSI -50.5
STATE 12.5 °C
TYPE MAX
addr 139416
dstsetting 1
mode 1
rferror 0
type HeatingThermostat
Helper:
Dblog:
12.5:
Logdb:
TIME 1479987114.41228
VALUE °C
17.0:
Logdb:
TIME 1479985984.90549
VALUE °C
20.0:
Logdb:
TIME 1479939926.0646
VALUE °C
21.0:
Logdb:
TIME 1479973685.81241
VALUE °C
Rssi:
Logdb:
TIME 1479987114.41228
VALUE -50.5
Timeinformationhour:
Logdb:
TIME 1479939618.53926
VALUE 0
Associate:
Logdb:
TIME 1479973898.1744
VALUE os.Kueche
Battery:
Logdb:
TIME 1479987114.41228
VALUE ok
Deassociate:
Logdb:
TIME 1479941010.86451
VALUE os.Heizung
Desiredtemperature:
Logdb:
TIME 1479988106.04336
VALUE off
Ecotemperature:
Logdb:
TIME 1479974112.19965
VALUE 16.0
Factoryreset:
Logdb:
TIME 1479987967.11092
VALUE
Mode:
Logdb:
TIME 1479987114.41228
VALUE manual
Temperature:
Logdb:
TIME 1479987114.41228
VALUE 19.0
Valveposition:
Logdb:
TIME 1479987114.41228
VALUE 0
Weekprofile:
Logdb:
TIME 1479940516.36249
VALUE Mon
Readings:
2016-11-24 12:31:54 RSSI -50.5
2016-11-23 23:20:18 TimeInformationHour 0
2016-11-24 12:31:54 battery ok
2016-11-23 23:08:27 boostDuration 25
2016-11-23 23:08:27 boostValveposition 80
2016-11-23 23:15:28 comfortTemperature 19.5
2016-11-23 23:08:27 decalcification Sat 12:00
2016-11-24 12:31:54 desiredTemperature 12.5
2016-11-23 23:08:27 ecoTemperature 17.0
2016-11-23 23:08:27 firmware 1.0
2016-11-23 23:15:26 groupid 0
2016-11-23 23:08:27 maxValveSetting 100
2016-11-23 23:08:27 maximumTemperature on
2016-11-23 23:08:27 measurementOffset 0.0
2016-11-23 23:08:27 minimumTemperature off
2016-11-24 12:31:54 mode manual
2016-11-24 12:48:26 msgcnt 28
2016-11-24 12:31:54 state 12.5 °C
2016-11-24 12:31:54 temperature 19.0
2016-11-23 23:08:27 testresult 161
2016-11-23 23:08:27 valveOffset 0
2016-11-24 12:31:54 valveposition 0
2016-11-23 23:08:27 weekprofile-0-Sat-temp 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-0-Sat-time 00:00-06:00 / 06:00-22:00 / 22:00-00:00
2016-11-23 23:08:27 weekprofile-1-Sun-temp 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-1-Sun-time 00:00-06:00 / 06:00-22:00 / 22:00-00:00
2016-11-23 23:08:27 weekprofile-2-Mon-temp 17.0 °C / 21.0 °C / 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-2-Mon-time 00:00-06:00 / 06:00-09:00 / 09:00-17:00 / 17:00-23:00 / 23:00-00:00
2016-11-23 23:08:27 weekprofile-3-Tue-temp 17.0 °C / 21.0 °C / 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-3-Tue-time 00:00-06:00 / 06:00-09:00 / 09:00-17:00 / 17:00-23:00 / 23:00-00:00
2016-11-23 23:08:27 weekprofile-4-Wed-temp 17.0 °C / 21.0 °C / 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-4-Wed-time 00:00-06:00 / 06:00-09:00 / 09:00-17:00 / 17:00-23:00 / 23:00-00:00
2016-11-23 23:08:27 weekprofile-5-Thu-temp 17.0 °C / 21.0 °C / 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-5-Thu-time 00:00-06:00 / 06:00-09:00 / 09:00-17:00 / 17:00-23:00 / 23:00-00:00
2016-11-23 23:08:27 weekprofile-6-Fri-temp 17.0 °C / 21.0 °C / 17.0 °C / 21.0 °C / 17.0 °C
2016-11-23 23:08:27 weekprofile-6-Fri-time 00:00-06:00 / 06:00-09:00 / 09:00-17:00 / 17:00-23:00 / 23:00-00:00
2016-11-23 23:08:27 windowOpenDuration 15
2016-11-23 23:08:27 windowOpenTemperature 12.0
Internals:
interfaces thermostat;battery;temperature
Attributes:
IODev CULMAX
room 1.2.Kueche,MAX
Was sagt denn das Log zu den Zeitpunkten, wo du eine Änderung sendest?
DIe geschilderten Symptome kommen u. a. vor, wenn das Pairing zwischen Thermostat und CUL nicht funktioniert hat - dann solltest du auch im Log "Missing ACK"-Fehlermeldungen sehen.
Moin,
danke! Problem gelöst, um die genaue Meldung nach dem Paarungsversuch zu posten hatte ich den Anlernvorgang nochmal wiederholt und was macht der Thermostat? Er reagiert jetzt auf Settings :o
Im Log waren keine Fehlermeldungen.
-teddy