Hallo,
ich habe meine Bewegungsmelder wieder ausgekramt und versuche diese mit SIGNALduino in FHEM einzubinden. Klappt leider nicht.
list sduino
Internals:
Clients :IT:CUL_TCM97001:OREGON:CUL_TX:Hideki:SD_WS07:SD_WS09:SD_WS:RFXX10REC:Dooya:SOMFY:SD_WS_Maverick:SIGNALduino_un:
DEF /dev/ttyUSB0@57600
DMSG P7#12802EF4E
DevState initialized
DeviceName /dev/ttyUSB0@57600
FD 11
MSGCNT 31
NAME sduino
NR 34
PARTIAL
RAWMSG MS;P0=-1013;P1=488;P3=-2015;P4=-4067;D=14101010131010131013101010101010101010131013131310131313131013101013131310;CP=1;SP=4;O;
STATE opened
TIME 1482955591.64735
TYPE SIGNALduino
unknownmessages
version V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
Matchlist:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}
11:SD_WS09 ^P9#[A-Fa-f0-9]+
12:SD_WS ^W\d+#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^YsA[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
1:IT ^i......
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
7:Hideki ^P12#75[A-F0-9]+
X:SIGNALduino_un ^[uP]\d+#.*
QUEUE:
Readings:
2016-12-28 19:54:29 ITParms ITParams: 6 300
2016-12-28 19:53:11 cmds ?UseoneofViRtXFSPCG
2016-12-28 20:16:20 config MS=1;MU=1;MC=1
2016-12-28 21:00:50 ping OK
2016-12-28 20:41:56 raw V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
2016-12-28 21:06:31 state opened
2016-12-28 20:20:50 version V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
Keepalive:
ok 0
retry 0
mcIdList:
10
11
12
18
43
47
msIdList:
0
1
13
14
15
17
2
22
23
25
3
32
33
35
38
4
41
45
6
7
muIdList:
16
20
21
24
26
27
28
29
30
31
34
36
37
39
40
42
44
46
48
49
5
50
51
8
9
Attributes:
flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
hardware nano328
room 99_IOs
Log Bewegung:
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1055;LH=1147;SL=-500;SH=599;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1049;LH=1155;SL=-497;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-494;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1043;LH=1159;SL=-494;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1040;LH=1159;SL=-491;SH=607;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1034;LH=1165;SL=-479;SH=620;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1161;SL=-489;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-489;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1161;SL=-490;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1163;SL=-488;SH=613;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1164;SL=-489;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-486;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1163;SL=-488;SH=614;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1162;SL=-491;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-488;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1040;LH=1162;SL=-490;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1163;SL=-488;SH=611;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-487;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-490;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1035;LH=1163;SL=-489;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1164;SL=-489;SH=611;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1161;SL=-488;SH=613;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1163;SL=-488;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1161;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1163;SL=-488;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1161;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-490;SH=612;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1161;SL=-486;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1039;LH=1163;SL=-489;SH=610;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1043;LH=1153;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1156;SL=-495;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1157;SL=-495;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1042;LH=1158;SL=-494;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-498;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1156;SL=-493;SH=607;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1157;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-494;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-495;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-497;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-498;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1155;SL=-495;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-498;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1152;SL=-497;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-496;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1048;LH=1154;SL=-495;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-495;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-495;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-494;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1152;SL=-499;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1153;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-494;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1153;SL=-498;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1154;SL=-496;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-493;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-497;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1152;SL=-498;SH=601;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1155;SL=-498;SH=601;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-495;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-498;SH=601;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-496;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1156;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-493;SH=607;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1151;SL=-497;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1152;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-494;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1155;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-497;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-496;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1042;LH=1153;SL=-496;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1154;SL=-498;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MU;P0=-694;P1=-114;P2=-395;P3=367;P4=-236;D=3012221313340240412111143132044114340004;CP=3;
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 5: sduino: applying filterfunc SIGNALduino_compPattern
Ich habe schon herausgefunden, dass D=FFFED51C wie folgt aufgeteilt werden kann:
FFFED5 = Adresse, die per DIP einstellt wird
1C = wechselt, 10, 14, 18, 1C - dann fängt es wieder mit 10 an und wiederholt sich bei jeder Bewegung
Jetzt habe ich keine Ahnung wie es weiter geht. Habe schon einiges gelesen, aber das hat mir auch nicht recht weiter geholfen.
Kann mir mal jemand einen "Anstubser" geben. Danke!
MfG
Nunja, ich kann das Protokoll im Modul bekannt machen.
Dann wird beim Empfang des Bewegungsmelder ein Event ausgelöst.
Auf dieses Event könntest Du mit einem DOIF oder notify reagieren.
Um das ganze in einem Modul zu implementieren kann das Modul die Daten empfangen und ein Gerät anzeigen.
Ich nehme an, der Bewegungsmelder sendet nur ein einziges Kommando.
Grüße Sidey
Hi,
super, das hört sich ja gut an und es reicht mir auch, wenn ein Event gesendet wird. Haupsache ich kann die beiden Bewegungsmelder unterscheiden.
Ja, nur ein Kommando. Die Dinger haben auch noch einen Taster zur manuellen Auslösung. Aber auch wenn ich den drücke, sendet er gleich wie bei Bewegungserkennung.
Eins habe ich noch herausgefunden:
FFFED5 = Adresse, die per DIP einstellt wird, FFF ändert sich nie
1 = Kanal, per gesondertem DIP, bei mir bei beiden 1 (CH 1) oder 3 (CH 2)
C = wechselt, 0, 4, 8, C - dann fängt es wieder mit 0 an und wiederholt sich bei jeder Bewegung
MfG
Ich habe was implementiert, damit zumindest Events im Eventmonitor auftauchen.
Probier es mal aus
update all https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r33/controls_signalduino.txt
Hallo,
Update durchgeführt. Leider nur teilweiser Erfolg. Bewegung wird nicht erkannt. Nur die Taste. Bei Tastendruck passiert folgendes:
Event
2016-12-31 17:09:00 SIGNALduino sduino opened
2016-12-31 17:09:00 SIGNALduino sduino UNKNOWNCODE u52#00012AEB
2016-12-31 17:09:01 SIGNALduino sduino opened
2016-12-31 17:09:01 SIGNALduino sduino UNKNOWNCODE u52#00012AEB
2016-12-31 17:09:02 SIGNALduino sduino opened
2016-12-31 17:09:02 SIGNALduino sduino UNKNOWNCODE u52#00012AEB
Log
2016.12.31 17:18:34 3: sduino: Unknown code u52#000255DF, help me!
2016.12.31 17:18:34 3: sduino: Unknown code u52#00012AEF, help me!
2016.12.31 17:18:35 3: sduino: Unknown code u52#00012AEF, help me!
2016.12.31 17:18:36 3: sduino: Unknown code u52#00012AEF, help me!
2016.12.31 17:18:37 3: sduino: Unknown code u52#00012AEF, help me!
2016.12.31 17:18:58 3: sduino: Unknown code u52#000255CF, help me!
2016.12.31 17:18:59 3: sduino: Unknown code u52#00012AE7, help me!
2016.12.31 17:19:00 3: sduino: Unknown code u52#00012AE7, help me!
2016.12.31 17:19:01 3: sduino: Unknown code u52#00012AE7, help me!
Es gibt wohl noch einen Unterschied zwischen Taste und Bewegung, die ich nicht erkenne. Bei Bewegung erscheint folgendes im Log und nichts im Eventmonitor:
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-336;P1=489;P2=-2082;P4=144;P5=-984;P6=-3878;P7=-8940;D=0121245121212161216161212121212121212121612121612121616121212171616;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 1
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 2
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-284;P1=507;P2=-4021;P3=-2019;P4=-7484;P5=260;P6=-1364;D=0121213121213121313131213121213131313131313131312131312131312121313131456121216;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 77
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-2672;P1=504;P2=-1957;P3=-4044;P4=-92;D=01213131213121212131213131212121212121212121312121312121313121214;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-2656;P1=497;P2=-4023;P3=-264;P4=110;P5=-1819;D=01213421212151212151215431515121512121515151515;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 4
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 29 -> HT12e remote mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 34 -> unknown34 mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 37 -> weather37 mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-872;P1=500;P2=-1923;P3=-4030;P4=108;P6=-2956;D=01213121213131212121343131312421312131640121312121210;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 27 -> remote27 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 27 -> remote27 mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 28 -> IC Ledspot mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 8 -> TX3 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 51
2016.12.31 17:13:11 4: sduino/msg READ: MU;P0=-1260;P1=504;P2=-1987;P3=-4014;P4=-8912;P5=148;P6=-452;D=012121312121313121212141313561313121313121312121213121312;CP=1;
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 13b -> FLAMINGO FA21 b matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 13b -> FLAMINGO FA21 b mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 30 -> unitec47031 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: Starting demodulation at Position 2
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 36 -> socket36 matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 36 -> socket36 mismatches, aborting
2016.12.31 17:13:11 5: sduino: applying filterfunc SIGNALduino_compPattern
2016.12.31 17:13:11 4: sduino: Fingerprint for MU Protocol id 39 -> X10 Protocol matches, trying to demodulate
2016.12.31 17:13:11 5: sduino: start pattern for MU Protocol id 39 -> X10 Protocol mismatches, aborting
MfG
Das mit dem Tastendruck sieht so aus, wie gewünscht. Nur bei der Bewegung bin ich der Meinung, dass die Logs nicht vom Bewegungsmelder kommen.
Ja, Du hast Recht. Log ist von einem anderen Device.
Tastendruck wird verarbeitet.
Bewegung wird nicht erkannt. Keine Daten im Log (5) und im Eventmonitor. Erneut versucht mit Update und mit Update dev-r33.
MfG
Hallo,
ich bin mit FHEM wieder auf eine Version aus November zurück gegangen. Und die Bewegungsmelder zeigen sich wieder:
gelöscht, in Arbeit
Hoffe, das hilft weiter.
MfG
Interessant... Kannst Du mit der aktuellen Firmware noch mal bei deaktivierem MC Decoder loggen?
Du bist zu schnell für mich :)
Habe die Logs oben wieder entfernt.
In der Zwischenzeit habe ich ein Update auf die aktuelle dev-r33 durchgeführt, neu geflasht (V 3.3.1-dev SIGNALduino - compiled at Jan 3 2017 23:59:32), FHEM restart. Und siehe da, Taste und Bewegung wird erkannt:
Log (3)
2017.01.04 13:10:18 3: sduino: Unknown code u52#000345CF, help me!
2017.01.04 13:10:18 3: sduino: Unknown code u52#0001A2E7, help me!
2017.01.04 13:10:19 3: sduino: Unknown code u52#0001A2E7, help me!
2017.01.04 13:10:20 3: sduino: Unknown code u52#0001A2E7, help me!
Eventmonitor
2017-01-04 13:10:18 SIGNALduino sduino UNKNOWNCODE u52#000345CF
2017-01-04 13:10:18 SIGNALduino sduino opened
2017-01-04 13:10:18 SIGNALduino sduino UNKNOWNCODE u52#0001A2E7
2017-01-04 13:10:19 SIGNALduino sduino opened
2017-01-04 13:10:19 SIGNALduino sduino UNKNOWNCODE u52#0001A2E7
2017-01-04 13:10:20 SIGNALduino sduino opened
2017-01-04 13:10:20 SIGNALduino sduino UNKNOWNCODE u52#0001A2E7
Wie kann ich die Meldungen (help me) weg bekommen?
MfG
Hast du 1* Bewegung und drei mal Taste gesendet, oder warum haben wir zwei verschiedene Codes.
Die help mehr Meldungen verschwinden leider nur, wenn es ein Modul gibt, welches den Sensor verarbeitet oder Du den Fhem Loglevel auf 2 reduzierst.
Nein, alle Log- und Eventmeldungen zu einer Bewegungserkennung. Manchmal sehe ich diese zweite Meldung und dann wieder nur drei oder vier gleiche Meldungen.
Modul OREGON habe ich mir mal angesehen, das bekomme ich nicht auf die Reihe. Ich Signalduino auf Loglevel 2.
MfG
Hallo Ralf,
Zitat von: Ralf W. am 28 Dezember 2016, 21:30:21
Hallo,
ich habe meine Bewegungsmelder wieder ausgekramt und versuche diese mit SIGNALduino in FHEM einzubinden. Klappt leider nicht.
list sduino
Internals:
Clients :IT:CUL_TCM97001:OREGON:CUL_TX:Hideki:SD_WS07:SD_WS09:SD_WS:RFXX10REC:Dooya:SOMFY:SD_WS_Maverick:SIGNALduino_un:
DEF /dev/ttyUSB0@57600
DMSG P7#12802EF4E
DevState initialized
DeviceName /dev/ttyUSB0@57600
FD 11
MSGCNT 31
NAME sduino
NR 34
PARTIAL
RAWMSG MS;P0=-1013;P1=488;P3=-2015;P4=-4067;D=14101010131010131013101010101010101010131013131310131313131013101013131310;CP=1;SP=4;O;
STATE opened
TIME 1482955591.64735
TYPE SIGNALduino
unknownmessages
version V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
Matchlist:
10:SD_WS07 ^P7#[A-Fa-f0-9]{6}F[A-Fa-f0-9]{2}
11:SD_WS09 ^P9#[A-Fa-f0-9]+
12:SD_WS ^W\d+#.*
13:RFXX10REC ^(20|29)[A-Fa-f0-9]+
14:Dooya ^P16#[A-Fa-f0-9]+
15:SOMFY ^YsA[0-9A-F]+
16:SD_WS_Maverick ^P47#[A-Fa-f0-9]+
1:IT ^i......
2:CUL_TCM97001 ^s[A-Fa-f0-9]+
4:OREGON ^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*
5:CUL_TX ^TX..........
7:Hideki ^P12#75[A-F0-9]+
X:SIGNALduino_un ^[uP]\d+#.*
QUEUE:
Readings:
2016-12-28 19:54:29 ITParms ITParams: 6 300
2016-12-28 19:53:11 cmds ?UseoneofViRtXFSPCG
2016-12-28 20:16:20 config MS=1;MU=1;MC=1
2016-12-28 21:00:50 ping OK
2016-12-28 20:41:56 raw V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
2016-12-28 21:06:31 state opened
2016-12-28 20:20:50 version V 3.3.0 SIGNALduino - compiled at Sep 18 2016 00:28:28
Keepalive:
ok 0
retry 0
mcIdList:
10
11
12
18
43
47
msIdList:
0
1
13
14
15
17
2
22
23
25
3
32
33
35
38
4
41
45
6
7
muIdList:
16
20
21
24
26
27
28
29
30
31
34
36
37
39
40
42
44
46
48
49
5
50
51
8
9
Attributes:
flashCommand avrdude -c arduino -b 57600 -P [PORT] -p atmega328p -vv -U flash:w:[HEXFILE] 2>[LOGFILE]
hardware nano328
room 99_IOs
Log Bewegung:
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1055;LH=1147;SL=-500;SH=599;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1049;LH=1155;SL=-497;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-494;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1043;LH=1159;SL=-494;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1040;LH=1159;SL=-491;SH=607;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1034;LH=1165;SL=-479;SH=620;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1161;SL=-489;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-489;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1161;SL=-490;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1163;SL=-488;SH=613;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1164;SL=-489;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-486;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1163;SL=-488;SH=614;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1162;SL=-491;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-488;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1040;LH=1162;SL=-490;SH=609;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1163;SL=-488;SH=611;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1160;SL=-487;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-490;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1035;LH=1163;SL=-489;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1164;SL=-489;SH=611;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1039;LH=1161;SL=-488;SH=613;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1163;SL=-488;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1036;LH=1161;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1163;SL=-488;SH=611;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1161;SL=-490;SH=612;D=FFFED518;C=549;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1037;LH=1162;SL=-490;SH=612;D=FFFED518;C=550;L=30;
2016.12.28 21:19:01 4: sduino/msg READ: MC;LL=-1038;LH=1161;SL=-486;SH=614;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1039;LH=1163;SL=-489;SH=610;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1043;LH=1153;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1156;SL=-495;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1157;SL=-495;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1042;LH=1158;SL=-494;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-498;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1156;SL=-493;SH=607;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1157;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-494;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-495;SH=606;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-497;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-498;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1155;SL=-495;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-498;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1152;SL=-497;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-496;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1048;LH=1154;SL=-495;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-495;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-495;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-494;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1152;SL=-499;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1046;LH=1153;SL=-496;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:02 4: sduino/msg READ: MC;LL=-1047;LH=1155;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-494;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1153;SL=-498;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1154;SL=-496;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1155;SL=-493;SH=608;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-497;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1152;SL=-498;SH=601;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1048;LH=1155;SL=-498;SH=601;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-495;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1154;SL=-498;SH=601;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1156;SL=-496;SH=605;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1156;SL=-496;SH=604;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1153;SL=-493;SH=607;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1155;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1151;SL=-497;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1045;LH=1152;SL=-495;SH=605;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-494;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1155;SL=-497;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1046;LH=1154;SL=-497;SH=603;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1153;SL=-496;SH=602;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1042;LH=1153;SL=-496;SH=606;D=FFFED518;C=549;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1047;LH=1154;SL=-498;SH=603;D=FFFED518;C=550;L=30;
2016.12.28 21:19:03 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MC;LL=-1044;LH=1154;SL=-496;SH=604;D=FFFED518;C=549;L=30;
2016.12.28 21:19:04 4: sduino/msg READ: MU;P0=-694;P1=-114;P2=-395;P3=367;P4=-236;D=3012221313340240412111143132044114340004;CP=3;
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 16 -> Dooya shutter matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 5: sduino: applying filterfunc SIGNALduino_filterSign
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 20 -> livolo matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 28 -> IC Ledspot matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 29 -> HT12e remote matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 34 -> unknown34 matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 4: sduino: Fingerprint for MU Protocol id 37 -> weather37 matches, trying to demodulate
2016.12.28 21:19:04 5: sduino: Starting demodulation at Position 2
2016.12.28 21:19:04 5: sduino: applying filterfunc SIGNALduino_compPattern
Ich habe schon herausgefunden, dass D=FFFED51C wie folgt aufgeteilt werden kann:
FFFED5 = Adresse, die per DIP einstellt wird
1C = wechselt, 10, 14, 18, 1C - dann fängt es wieder mit 10 an und wiederholt sich bei jeder Bewegung
Jetzt habe ich keine Ahnung wie es weiter geht. Habe schon einiges gelesen, aber das hat mir auch nicht recht weiter geholfen.
Kann mir mal jemand einen "Anstubser" geben. Danke!
MfG
ist das Thema noch aktuell und hast du den PIR zum laufen bekommen?
Gern würde ich diesen in die Software integrieren das man kein DOIF anlegen muss.
Besitzt du diesen noch?
MfG