Hallo,
mit dem heutigen Update empfängt FHEM das CLOSE-Event vom threeStateSensor nicht mehr. OPEN geht durch, CLOSED nicht.
Habe auf die Version von vor dem Update reverted und es geht wieder. Vorher bin ich nochmal nach hause gefahren, weil ich dachte es wäre etwas offen was nicht offen sein sollte ???
Gruß
Hallo
kann ich so nicht bestätigen, bin hier auch tagesaktuell und es funktioniert.
vg Jens
Ich habe jetzt auch nochmal getestet:
2017.02.06 17:50:30 1 : UPD ./CHANGED
2017.02.06 17:50:30 1 : UPD ./fhem.pl
2017.02.06 17:50:30 1 : UPD FHEM/01_FHEMWEB.pm
2017.02.06 17:50:30 1 : UPD FHEM/10_CUL_HM.pm
2017.02.06 17:50:30 1 : UPD FHEM/59_Wunderground.pm
2017.02.06 17:50:30 1 : UPD FHEM/70_BRAVIA.pm
2017.02.06 17:50:31 1 : UPD FHEM/74_XiaomiFlowerSens.pm
2017.02.06 17:50:31 1 : UPD FHEM/93_DbRep.pm
2017.02.06 17:50:31 1 : UPD FHEM/98_GEOFANCY.pm
2017.02.06 17:50:31 1 : UPD FHEM/98_powerMap.pm
2017.02.06 17:50:31 1 : UPD FHEM/98_telnet.pm
2017.02.06 17:50:31 1 : saving fhem.cfg
2017.02.06 17:50:31 1 : saving ./log/fhem.save
2017.02.06 17:50:31 1 : Calling /usr/local/bin/perl5.20.3 ./contrib/commandref_join.pl -noWarnings, this may take a while
2017.02.06 17:50:40 1 :
2017.02.06 17:50:40 1 : update finished, "shutdown restart" is needed to activate the changes.
2017.02.06 17:50:40 1 :
2017.02.06 17:50:40 1 : Please consider using the global attribute sendStatistics
Neustart durchgeführt, update check:
nothing to do...
Geöffnet - open event kommt.
Geschlossen - nichts kommt.
Backup wiederherstellt und neu gestartet (update check):
List of new / modified files since last update:
UPD FHEM/01_FHEMWEB.pm
UPD FHEM/10_CUL_HM.pm
UPD FHEM/59_Wunderground.pm
UPD FHEM/70_BRAVIA.pm
UPD FHEM/74_XiaomiFlowerSens.pm
UPD FHEM/93_DbRep.pm
UPD FHEM/98_GEOFANCY.pm
UPD FHEM/98_powerMap.pm
UPD FHEM/98_telnet.pm
Geöffnet - open event kommt.
Geschlossen - closed event kommt.
Sensor:
Attributes:
IODev cul_cube
actCycle 028:00
actStatus alive
autoReadReg 4_reqStatus
expert 2_raw
firmware 2.4
model HM-SEC-SC-2
subType threeStateSensor
cul_cube:
2016-11-04 08:27:24 version V 1.21.00 a-culfw Build: 70 (2016-04-22_17-15-27) CUBe (F-Band: 868MHz)
Sonst niemand mit dem Problem? Das kann doch eigentlich fast nicht sein
Ich habe den CUL heute mal auf die aktuelle Version (V 1.23.08 a-culfw Build: 156 (2017-01-28_13-46-55) CUBe (F-Band: 868MHz)) aktualisiert und es danach noch einmal mit den aktuellen Versionen von FHEM probiert. Jetzt funktioniert wieder alles problemlos. Könnte also an der alten a-culfw Version in Verbindung mit dem Update gelegen haben.