Originally posted by: <email address deleted>
Hi,
trying to play with CUL-bandwidth (because of receiver problems with
S300TH and HMS100 TF).
But
set CUL bWidth 550
leads to
Can't get old MDMCFG4 value
And values are still the same...
Googling was not my friend here..
Bommel
--
To unsubscribe from this group, send email to
fhem-users+unsubscribe@googlegroups.com
> set CUL bWidth 550
> leads to
> Can't get old MDMCFG4 value
What is "get CUL raw C10" telling you?
--
To unsubscribe from this group, send email to
fhem-users+unsubscribe@googlegroups.com
Originally posted by: <email address deleted>
On 19 Dez., 17:34, Rudolf Koenig wrote:
> > set CUL bWidth 550
> > leads to
> > Can't get old MDMCFG4 value
>
> What is "get CUL raw C10" telling you?
Shows "CUL raw => C10 = 55 / 85"
Nachfrage: Was macht "C10"?
--
To unsubscribe from this group, send email to
fhem-users+unsubscribe@googlegroups.com
> Shows "CUL raw => C10 = 55 / 85"
Bei mir auch. Und "set CUL bWidth 550" klappt auch. Steht danach im log:
2011.12.19 19:05:31.290 3: Setting MDMCFG4 (10) to 25 = 541 KHz
> Nachfrage: Was macht "C10"?
Holt Inhalt des 10-ten CC1101-Registers (MDMCFG4), bWidth ist ein Teil davon.
Details siehe culfw/docs/commandref.html und CC1101.pdf von TI
--
To unsubscribe from this group, send email to
fhem-users+unsubscribe@googlegroups.com
Originally posted by: <email address deleted>
On 19 Dez., 19:08, Rudolf Koenig wrote:
> Holt Inhalt des 10-ten CC1101-Registers (MDMCFG4), bWidth ist ein Teil davon.
> Details siehe culfw/docs/commandref.html und CC1101.pdf von TI
Hm. Im log steht da gar nix...
Was rät der Fachmann? Neu flashen?
--
To unsubscribe from this group, send email to
fhem-users+unsubscribe@googlegroups.com