Hi guys,
I've my whole house heated using FHT80 controlled by an FHZ1000 connected to my server. This whole setup is about 7 years old now but still working fine.
Now, I want want to add a wireless mains power switch, could be a power plug or wired inline, I don't mind. I want to control this from FHEM, but also have a separate wireless switch to manually switch the power when I need to.
Doesn't have to be heavy duty, I expect no more than 500 watts.
I would really appreciate some advice on which bits to get get. Is FS20 getting a bit long in the tooth these days? I don't mind going with another system even if that means adding new control unit to my server.
I've been browsing the Conrad site but can't really make heads or tails of it.
I would really appreciate some help with this.
Thanks,
Ingvar
FS20 is not an option for new installations. i'd vote for Homematic and - although I am a Conrad customer for 35 years - i'd buy these at ELV. They are closely connected to the manufacturer eQ-3
https://www.elv.de/homematic-132989-funk-schaltaktor-zwischenstecker-fuer-smart-home-hausautomation.html
https://www.elv.de/homematic-funk-wandsender-2fach.html
The actor can be switched by FHEM with a proper interface, see https://www.elv.de/homematic-funkmodul-fuer-raspberry-pi-bausatz.html
Regards
pah
As an alternative you can also go with ZWave.
Thanks guys, I'll look into those.
Hi Ingvar,
I started my way to home automation with a DECT power plug by AVM . So if you run a Fritzbox as DSL Modem, you could use the box as IO.
Later I found the nice integration with FHEM, and that's how I started with this so impressive application.
Kind regard,
Helmut
Oof I've been looking around but it doesn't help that my German is terrible.
Does there exist a power switch inline-wired (not a plug) that can be controlled from FHEM and my FHZ1000?
I get a bit lost looking around all these websites, be very grateful for a suggestion.
The FHZ1000 can control FS20 devices, FHT thermostats, and receive data from HMS and the KS300. Only the FS20 protocol supports power switches. If I understand "inline-wired" correctly, then FS20 SU-3 is the only one I found on the elv site. I was surprised that there is still quite a lot of FS20 stuff available.
Hm - "available" in the sense of existing installations, yes. But I don't know a source for new SU3 actors.
Regards
pah
Zitat von: Ingvar am 29 April 2017, 15:17:59
Oof I've been looking around but it doesn't help that my German is terrible.
Does there exist a power switch inline-wired (not a plug) that can be controlled from FHEM and my FHZ1000?
I get a bit lost looking around all these websites, be very grateful for a suggestion.
What about this one?
http://www.ebay.de/itm/Funk-Schalter-FS-20-ST-3-Funksteckdose-FHZ-1000-FHT-80-ELV-Conrad-ECG-Medion-/302294322270
:( You must be joking. Used stuff, much too expensive. Are you the seller ?
pah
ZitatHm - "available" in the sense of existing installations, yes. But I don't know a source for new SU3 actors.
According to https://www.elv.de/elv-fs20-su-3-unterputz-funk-schalter-3680-va.html it is currently available.
It is remarkable that the link name differs from the content (3680va vs 1680 va).
Zitat von: Prof. Dr. Peter Henning am 30 April 2017, 05:33:41
:( You must be joking. Used stuff, much too expensive. Are you the seller ?
pah
No, I'm not. And I do not understand your comment. It is not compliant to do advertising here.
I want to help. This is why I post comments in our forum.
Means, there are power switches available and the link shows the product information for additional research.
May be, that kind of assets is only available in the 2nd market. I did not want to support that analysis, Ingvar can do this on his own.