Moin,
wie kann ich eine HM Komponente komplett entfernen.
z.b. ein Heizungsthermostat.
Gruß Ingo
Einfach Device und Channel löschen.
Dann stelle ich mich zu b.. dazu an :-\
Hab es schon mit delete HZ_ Essecke probiert bekomme aber die Meldung das ich es erst definieren soll.
Mach mal ein list vom Device bitte
Hallo,
eigentlich muß ich im Device nur nach unten Scrollen und auf "Delete this Device" klicken.
Gruß Rolf
Sorry musste erstmal kurz Essen... ;-)
Hier die Liste, es geht mir um HZ_Esseckke
Global:
global (no definition)
CUL:
BusW_Cul (Initialized)
FHEMWEB:
WEB (Initialized)
WEB_192.168.178.47_51016 (Connected)
WEB_192.168.178.47_51023 (Connected)
WEB_192.168.178.47_51024 (Connected)
WEB_192.168.178.47_51045 (Connected)
WEBphone (Initialized)
WEBtablet (Initialized)
HTTPSRV:
TABLETUI (TABLETUI)
CUL_HM:
ActionDetector (alive:1 dead:0 unkn:0 off:0)
HZ_Arbeitszimmer (CMDs_done)
HZ_Arbeitszimmer_Clima (T: 24.6 desired: 23.5 valve: 37)
HZ_Arbeitszimmer_ClimaTeam (unpeered)
HZ_Arbeitszimmer_Climate (unpeered)
HZ_Arbeitszimmer_Weather (24.6)
HZ_Arbeitszimmer_WindowRec (last:trigLast)
HZ_Arbeitszimmer_remote (unpeered)
HZ_Esseckke (RESPONSE TIMEOUT:RegisterRead)
HZ_Esseckke_Clima (T: 23.2 desired: 23.0 valve: 44)
HZ_Esseckke_ClimaTeam (???)
HZ_Esseckke_Climate (???)
HZ_Esseckke_Weather (23.2)
HZ_Esseckke_WindowRec (last:trigLast)
HZ_Esseckke_remote (???)
myVCCU (BusW_Cul:ok,)
readingsGroup:
HM_Components (Initialized)
eventTypes:
eventTypes (active)
notify:
initialUsbCheck (2017-10-24 19:34:53)
FileLog:
FileLog_HZ_Arbeitszimmer (active)
FileLog_HZ_Esseckke (active)
Logfile (active)
allowed:
allowed_WEB (validFor:WEB)
allowed_WEBphone (validFor:WEBphone)
allowed_WEBtablet (validFor:WEBtablet)
allowed_telnetPort (validFor:telnetPort)
HMinfo:
HM (updated:2017-10-24 19:23:39)
autocreate:
autocreate (active)
telnet:
telnetPort (Initialized)
Keine Liste sondern ein list. Ist ein FHEM Befehl.
list DEVICENAME
Das kommet wenn ich list HZ_Esseckke eingebe
Internals:
DEF 568385
IODev BusW_Cul
NAME HZ_Esseckke
NOTIFYDEV global
NR 38
NTFY_ORDER 50-HZ_Esseckke
STATE RESPONSE TIMEOUT:RegisterRead
TYPE CUL_HM
channel_01 HZ_Esseckke_Weather
channel_02 HZ_Esseckke_Climate
channel_03 HZ_Esseckke_WindowRec
channel_04 HZ_Esseckke_Clima
channel_05 HZ_Esseckke_ClimaTeam
channel_06 HZ_Esseckke_remote
READINGS:
2017-10-24 18:49:46 Activity alive
2017-10-24 18:18:23 CommandAccepted no
2017-10-24 18:18:22 D-firmware 1.4
2017-10-24 18:18:22 D-serialNr OEQ0240217
2017-10-24 18:05:51 R-pairCentral set_0x000000
2017-10-24 19:34:31 RegL_00.
2017-10-24 18:47:38 actuator 44
2017-10-24 18:19:35 battery ok
2017-10-24 18:47:38 batteryLevel 3.1
2017-10-24 18:47:38 desired-temp 23.0
2017-10-24 18:47:38 measured-temp 23.2
2017-10-24 18:47:38 motorErr communicationERR
2017-10-24 19:32:13 powerOn 2017-10-24 19:32:13
2017-10-24 19:32:13 recentStateType info
2017-10-24 19:32:38 state RESPONSE TIMEOUT:RegisterRead
helper:
HM_CMDNR 30
expert:
def 1
det 0
raw 1
tpl 0
io:
newChn +568385,00,00,00
prefIO
rxt 0
vccu
p:
568385
00
00
00
mRssi:
mNo
prt:
bErr 0
sProc 0
q:
qReqConf
qReqStat
role:
dev 1
tmpl:
Attributes:
IODev BusW_Cul
autoReadReg 4_reqStatus
expert 2_raw
webCmd getConfig:clear msgEvents
Dann gib doch mal ein
delete HZ_Esseckke
statt
delete HZ_ Essecke
Jup hat geklappt, ??? ::) ;D
manchmal sieht man den Walt vor lauter Bäumen nicht.
Gruß Ingo