Hallo zusammen,
nach längerer Pause habe ich mal wieder ein Problem und suche Hilfe und Rat bei euch :-)
Ich versuche diverse Ventilantrieb an meinem System mit Raspi, VCCU und LAN Gateways anzumelden und komme nicht weiter.
Prinzipiell funktioniert mein System, da ich alle möglichen HM Geräte anmelden und ordnungsgemäß benutzen kann.
Die Firmware der Antriebe ist die 1.4 und die Geräte sind frisch aus der Packung. Einziger eintrag im LOG ist: CUL_HM set VCCU.ZAK hmPairForSec 60
Die Antrieb tauchen zwar in Fhem auf, sind aber nicht gepairt und können demnach nicht eingestellt werden.
Auch ein reste nutzte bisher nichts die Antribe bleiben mit CMDs_pending im Fhem stehen.
Hier mal ein Beispillist:
Internals:
DEF 502C1D
HM.LAN.97.01_MSGCNT 7
HM.LAN.97.01_RAWMSG 0500002E018400502C1D0000001400954E4551313431333638335900FFFF
HM.LAN.97.01_RSSI -46
HM.LAN.97.01_TIME 2017-12-12 08:28:44
IODev HM.LAN.97.01:keepAlive
IODevName HM.LAN.97.01:keepAlive
LASTInputDev HM.LAN.97.01
MSGCNT 7
NAME HM_502C1D
NOTIFYDEV global
NR 206
NTFY_ORDER 50-HM_502C1D
STATE CMDs_pending
TYPE CUL_HM
channel_01 HM_502C1D_Weather
channel_02 HM_502C1D_Climate
channel_03 HM_502C1D_WindowRec
channel_04 HM_502C1D_Clima
channel_05 HM_502C1D_ClimaTeam
channel_06 HM_502C1D_remote
lastMsg No:01 - t:00 s:502C1D d:000000 1400954E4551313431333638335900FFFF
protCmdPend 58 CMDs_pending
protLastRcv 2017-12-12 08:28:44
protState CMDs_pending
rssi_at_HM.LAN.97.01 min:-46 max:-14 avg:-29.14 lst:-46 cnt:7
READINGS:
2017-11-20 10:17:34 Activity dead
2017-11-17 09:37:27 D-firmware 1.4
2017-11-17 09:37:27 D-serialNr NEQ1413683
2017-12-08 13:33:33 state CMDs_pending
cmdStack:
++B112F10000502C1D
++A0111511AB502C1D860418
++A0111511AB502C1D860418
++A0011511AB502C1D00040000000000
++A0011511AB502C1D0103
++A0011511AB502C1D01040000000001
++A0011511AB502C1D0203
++A0011511AB502C1D02040000000001
++A0011511AB502C1D0303
++A0011511AB502C1D03040000000001
++A0011511AB502C1D0403
++A0011511AB502C1D04040000000001
++A0011511AB502C1D00040000000007
++A0011511AB502C1D0503
++A0011511AB502C1D05040000000001
++A0011511AB502C1D0603
++A0011511AB502C1D06040000000001
++A001F10000502C1D00040000000000
++A001F10000502C1D0103
++A001F10000502C1D01040000000001
++A001F10000502C1D0203
++A001F10000502C1D02040000000001
++A001F10000502C1D0303
++A001F10000502C1D03040000000001
++A001F10000502C1D0403
++A001F10000502C1D04040000000001
++A001F10000502C1D00040000000007
++A001F10000502C1D0503
++A001F10000502C1D05040000000001
++A001F10000502C1D0603
++A001F10000502C1D06040000000001
++A001F10000502C1D00040000000000
++A001F10000502C1D0103
++A001F10000502C1D01040000000001
++A001F10000502C1D0203
++A001F10000502C1D02040000000001
++A001F10000502C1D0303
++A001F10000502C1D03040000000001
++A001F10000502C1D0403
++A001F10000502C1D04040000000001
++A001F10000502C1D00040000000007
++A001F10000502C1D0503
++A001F10000502C1D05040000000001
++A001F10000502C1D0603
++A001F10000502C1D06040000000001
++A001F10000502C1D00040000000000
++A001F10000502C1D0103
++A001F10000502C1D01040000000001
++A001F10000502C1D0203
++A001F10000502C1D02040000000001
++A001F10000502C1D0303
++A001F10000502C1D03040000000001
++A001F10000502C1D0403
++A001F10000502C1D04040000000001
++A001F10000502C1D00040000000007
++A001F10000502C1D0503
++A001F10000502C1D05040000000001
++A001F10000502C1D0603
++A001F10000502C1D06040000000001
helper:
HM_CMDNR 40
PONtest 1
mId 0095
rxType 140
supp_Pair_Rep 1
expert:
def 1
det 0
raw 1
tpl 0
io:
newChn +502C1D,02,00,00
nextSend 1513063724.73243
prefIO
rxt 2
vccu
p:
502C1D
00
00
00
mRssi:
mNo 01
io:
HM.LAN.97.01 -46
prt:
bErr 0
brstWu 1
sProc 2
q:
qReqConf
qReqStat
role:
dev 1
prs 1
rssi:
at_HM.LAN.97.01:
avg -29.1428571428571
cnt 7
lst -46
max -14
min -46
shRegW:
07 04
tmpl:
Attributes:
IODev HM.LAN.97.01:keepAlive
actCycle 000:10
actStatus dead
autoReadReg 4_reqStatus
expert 2_raw
firmware 1.4
model HM-CC-RT-DN
room CUL_HM
serialNr NEQ1413683
subType thermostat
webCmd getConfig:clear msgEvents:burstXmit
Kednnt jemand das Problem und hat einen Lösungsansatz?
Braucht ihr noch weitere Infos?
Vielen Dank und Gruß
H-Man
trage ins attr iodev den namen deines io ein. oder nutze das attr iogrp.
danke für den Hinweis, das habe ich getestet => klappt.
Aber warum musste ich das beim Wandthermostat nicht machen?
Gruß
H-Man
wenn du ein fhem-update machst, sollten diese probleme nicht mehr auftauchen.gestern gab es einen fix bei HMUARTLGW.
und genau das war das dann wohl!
Update gemacht und schon klappt es! DANKE!