Hallo Zusammen,
ich habe einen Luftdrucksensor
DEF
00
IODev
myJeeLink
LASTInputDev
myJeeLinkStrom
LaCrosse_lastRcv
2018-02-21 15:47:15
MSGCNT
116
NAME
00thermo
NR
207
STATE
T: 32.7
TYPE
LaCrosse
addr
00
battery_new
0
bufferedT
32.7
corr1
0
corr2
0
myJeeLinkStrom_MSGCNT
116
myJeeLinkStrom_RAWMSG
OK WS 0 2 5 47 255 255 255 255 255 255 255 255 255 0 3 237
myJeeLinkStrom_TIME
2018-02-21 15:47:15
previousH
255
previousT
32.7
sensorType
2=NodeSensor
Mittels Statistikmodul möche den Luftdruck überwachen - die Tendenz interessiert zum Beispiel.
Folgende Readings kommen zurück:
Readings
H
0
2017-10-28 19:22:38
T
0
2017-10-28 21:39:06
battery
ok
2018-02-21 15:52:26
error
0
2018-02-21 15:52:26
humidity
0
2017-10-28 19:22:38
pressure
1005
2018-02-21 15:52:26
rain
3327.5
2017-10-29 22:31:45
statHumidityDay
Min: 0 Avg: 0 Max: 0
2018-02-21 15:47:15
statHumidityDayLast
Min: 0 Avg: 0 Max: 0
2018-02-20 23:59:55
statHumidityMonth
Min: 0 Avg: 0 Max: 0 (since: 2018-02-11_11:32:50 )
2018-02-21 15:47:15
statHumidityYear
Min: 0 Avg: 0 Max: 0 (since: 2018-02-11_11:32:50 )
2018-02-21 15:47:15
statPressureTendency
1h: +0 2h: -1 3h: -1 6h: -1
2018-02-21 14:59:55
statRain
Hour: 0.0 Day: 0.0 Month: 0.0 Year: 0.0 (since: 2018-02-12 )
2018-02-21 15:52:26
statRainLast
Hour: 0.0 Day: 0.0 Month: - Year: -
2018-02-21 14:59:55
statTemperatureDay
Min: 31.4 Avg: 32.4 Max: 32.8
2018-02-21 15:47:15
statTemperatureDayLast
Min: 31.6 Avg: 32.4 Max: 32.7
2018-02-20 23:59:55
statTemperatureMonth
Min: 27.9 Avg: 32.5 Max: 34.0 (since: 2018-02-11_11:32:50 )
2018-02-21 15:47:15
statTemperatureYear
Min: 27.9 Avg: 32.5 Max: 34.0 (since: 2018-02-11_11:32:50 )
2018-02-21 15:47:15
state
T: 32.7
2018-02-21 15:47:05
temperature
32.7
2018-02-21 15:52:26
windDirectionDegree
25.5
2017-11-27 09:31:29
windDirectionText
NNE
2017-11-27 09:31:29
windGust
665.5
2018-01-19 18:39:08
Der Sensor liefert tatsächlich aber nur "pressure" zurück.
Woher kommen die anderen Werte?
Wie binde ich die Statistik an "pressure"?
Viele Grüße
Michael
Zitat von: hemmi am 21 Februar 2018, 15:57:32
Woher kommen die anderen Werte?
Steht im Wiki unter Internal Sensors Sensor-ID -> https://wiki.fhem.de/wiki/LaCrosseGateway_V1.x#Internal_Sensors_.22Sensor-ID.22
ZitatWenn ein LGW interne Sensoren hat (BME280, BMP180, DHT22, ...) dann sendet es die Daten des Sensors so, als ob es eine Wetterstation wäre (WS 1600 Format) an das LGW.