Hallo,
das Update meiner fhem-installation funktioniert nicht mehr.
Wenn ich "update check" eingebe, wird folgendes aufgelistet:
fhem
List of new / modified files since last update:
UPD ./CHANGED
UPD ./MAINTAINER.txt
UPD ./fhem.pl
UPD FHEM/00_HMLAN.pm
UPD FHEM/00_SIGNALduino.pm
UPD FHEM/01_FHEMWEB.pm
UPD FHEM/10_CUL_HM.pm
UPD FHEM/10_EnOcean.pm
UPD FHEM/10_IT.pm
UPD FHEM/10_MQTT2_DEVICE.pm
UPD FHEM/10_MQTT_GENERIC_BRIDGE.pm
UPD FHEM/11_FHT.pm
UPD FHEM/14_CUL_TCM97001.pm
UPD FHEM/14_Hideki.pm
UPD FHEM/14_SD_RSL.pm
UPD FHEM/14_SD_WS.pm
UPD FHEM/14_SD_WS07.pm
UPD FHEM/14_SD_WS09.pm
UPD FHEM/14_SD_WS_Maverick.pm
UPD FHEM/34_ESPEasy.pm
UPD FHEM/36_Shelly.pm
UPD FHEM/37_harmony.pm
UPD FHEM/41_OREGON.pm
UPD FHEM/45_TRX.pm
UPD FHEM/46_TRX_LIGHT.pm
UPD FHEM/46_TRX_SECURITY.pm
UPD FHEM/46_TRX_WEATHER.pm
UPD FHEM/89_FULLY.pm
UPD FHEM/89_VCLIENT.pm
UPD FHEM/90_SIGNALduino_un.pm
UPD FHEM/98_DLNARenderer.pm
UPD FHEM/98_DOIFtools.pm
UPD FHEM/98_Dooya.pm
UPD FHEM/98_MSwitch.pm
UPD FHEM/98_autocreate.pm
UPD FHEM/98_freezemon.pm
UPD FHEM/98_vitoconnect.pm
UPD FHEM/HMConfig.pm
UPD FHEM/SetExtensions.pm
UPD FHEM/WMBus.pm
UPD FHEM/firmware/SIGNALduino_nano328.hex
UPD FHEM/firmware/SIGNALduino_promini328.hex
UPD FHEM/firmware/SIGNALduino_uno.hex
UPD FHEM/lib/AttrTemplate/httpmod.template
UPD FHEM/lib/AttrTemplate/mqtt2.template
UPD www/pgm2/zwave_neighborlist.js
signalduino
nothing to do...
Also gebe ich folgendes ein:
"update" oder auch "update all" oder "update force" oder auch "update all https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r33/controls_signalduino.txt":
Im Log erscheint "1 : nothing to do...".
Nach dem "shutdown restart" ergibt sich wieder die obere Liste mit "update check".
Was mache ich falsch?
Danke im Voraus
lg, Gerhard
Hey, versuche mal folgendes
update all http://fhem.de/fhemupdate/controls_fhem.txt
Und gib FHEM dann mal einen Moment Zeit.
Bei update check steht ja ganz am Ende
signalduino
nothing to do...
Da ist es dann klar, dass bei
update all https://raw.githubusercontent.com/RFD-FHEM/RFFHEM/dev-r33/controls_signalduino.txt
nothing to do raus kommt.
Hallo,
ich habe nun ein Update probiert und mir die log-Einträge genau angeschaut.
Nach einigen Versuchen habe ich die Zeile hier entdeckt:
open ./FHEM/98_DLNARenderer.pm failed: Permission denied, trying to restore the previous version and aborting the update
Für mich war das ziemlich gut versteckt, weil der update-Prozess für den SignalDuino ja funktioniert hat.
Ich habe also die Zugriffsrechte anders gesetzt.
Nun scheint es wieder zu klappen.
Danke für Deine Hilfe!
lg, Gerhard