Hallo zusammen,
ich habe die Tage hier im Forum die Möglichkeit gefunden, für ein Device mehrere Devstateicons darzustellen. Das Ganze hat super geklappt, bis zu dem Zeitplunkt, als ich eine readingsGroup erstellen wollte. Dummerweise liest readingsGroup die Werte vom state mit ein und ignoriert dort die vorhandenen "<pre>" und Leerzeichen nicht. Dadurch verschiebt sich die Tabelle in der RG.
list der betroffenen readingsGroup
Internals:
CFGFN
DEF <Gerät>,<Modus>,<Position>,<Richtung>,<°links>,<°rechts>,<Min Elevation>,<Min Temp> (((EG|OG).*_RO_.*)||EG_WZ_Markise||Rollo.KUE02):?ASC_Shading_Mode,?ASC_Shading_Pos,?ASC_Shading_Direction,?ASC_Shading_Angle_Left,?ASC_Shading_Angle_Right,?ASC_Shading_Min_Elevation,?ASC_Shading_Min_OutsideTemperature
FUUID 5cb0c55f-f33f-8d79-8b8d-a7eeb26051f5df3f
NAME rg_ASC_Rolllaeden_Shading
NR 9307
NTFY_ORDER 50-rg_ASC_Rolllaeden_Shading
STATE Initialized
TYPE readingsGroup
mayBeVisible 1
CONTENT:
EG_BAD_RO_Rollo 1
EG_KUE_RO_01_Rollo 1
EG_WZ_Markise 1
EG_WZ_RO_Jalou_WG 1
EG_WZ_RO_Jalou_fenster 1
OG_RO_Testrollo 1
OG_SZ_RO_01Rollo 1
OG_SZ_RO_01Rollo_AUF 1
OG_SZ_RO_01Rollo_ZU 1
OG_SZ_RO_02Rollo 1
OG_SZ_RO_02Rollo_AUF 1
OG_SZ_RO_02Rollo_ZU 1
Rollo.KUE02 1
CONTENT2:
DEVICES:
ARRAY(0x3dfd6b0)
ARRAY(0x38e03d8)
ARRAY(0x3e19618)
ARRAY(0x3e02d88)
ARRAY(0x3df83b8)
ARRAY(0x3e04640)
ARRAY(0x391fc60)
ARRAY(0x3dee410)
ARRAY(0x331dd28)
ARRAY(0x3e100e8)
ARRAY(0x9fa9d8)
ARRAY(0x3e18ac0)
ARRAY(0x3dda088)
ARRAY(0x3e04358)
fhem:
lastDefChange 1114
last_update 1555095888.01872
helper:
DEF
commands:
ASC_Shading_Angle_Left ASC_Shading_Angle_Left:knob,min:0,max:85,angleArc:85,rotation:anticlockwise,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round,angleOffset:270
ASC_Shading_Angle_Right ASC_Shading_Angle_Right:knob,min:0,max:85,angleArc:85,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round,
ASC_Shading_Direction ASC_Shading_Direction:knob,min:0,max:360,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:1,cursor:true,lineCap:round
ASC_Shading_Min_Elevation ASC_Shading_Min_Elevation:knob,min:15,max:35,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:1,lineCap:round,angleArc:20,angleOffset:55,rotation:anticlockwise
ASC_Shading_Min_OutsideTemperature ASC_Shading_Min_OutsideTemperature:knob,min:5,max:25,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:0.5,lineCap:round,angleArc:120,angleOffset:270
ASC_Shading_Mode ASC_Shading_Mode:always,home,absent,off
ASC_Shading_Pos ASC_Shading_Pos:knob,min:0,max:100,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round
positions:
EG_BAD_RO_Rollo.ASC_Shading_Angle_Left 2:4
EG_BAD_RO_Rollo.ASC_Shading_Angle_Right 2:5
EG_BAD_RO_Rollo.ASC_Shading_Direction 2:3
EG_BAD_RO_Rollo.ASC_Shading_Min_Elevation 2:6
EG_BAD_RO_Rollo.ASC_Shading_Min_OutsideTemperature 2:7
EG_BAD_RO_Rollo.ASC_Shading_Mode 2:1
EG_BAD_RO_Rollo.ASC_Shading_Pos 2:2
EG_KUE_RO_01_Rollo.ASC_Shading_Angle_Left 3:4
EG_KUE_RO_01_Rollo.ASC_Shading_Angle_Right 3:5
EG_KUE_RO_01_Rollo.ASC_Shading_Direction 3:3
EG_KUE_RO_01_Rollo.ASC_Shading_Min_Elevation 3:6
EG_KUE_RO_01_Rollo.ASC_Shading_Min_OutsideTemperature 3:7
EG_KUE_RO_01_Rollo.ASC_Shading_Mode 3:1
EG_KUE_RO_01_Rollo.ASC_Shading_Pos 3:2
EG_WZ_RO_Jalou_WG.ASC_Shading_Angle_Left 5:4
EG_WZ_RO_Jalou_WG.ASC_Shading_Angle_Right 5:5
EG_WZ_RO_Jalou_WG.ASC_Shading_Direction 5:3
EG_WZ_RO_Jalou_WG.ASC_Shading_Min_Elevation 5:6
EG_WZ_RO_Jalou_WG.ASC_Shading_Min_OutsideTemperature 5:7
EG_WZ_RO_Jalou_WG.ASC_Shading_Mode 5:1
EG_WZ_RO_Jalou_WG.ASC_Shading_Pos 5:2
OG_RO_Testrollo.ASC_Shading_Angle_Left 7:4
OG_RO_Testrollo.ASC_Shading_Angle_Right 7:5
OG_RO_Testrollo.ASC_Shading_Direction 7:3
OG_RO_Testrollo.ASC_Shading_Min_Elevation 7:6
OG_RO_Testrollo.ASC_Shading_Min_OutsideTemperature 7:7
OG_RO_Testrollo.ASC_Shading_Mode 7:1
OG_RO_Testrollo.ASC_Shading_Pos 7:2
Rollo.KUE02.ASC_Shading_Angle_Left 14:4
Rollo.KUE02.ASC_Shading_Angle_Right 14:5
Rollo.KUE02.ASC_Shading_Direction 14:3
Rollo.KUE02.ASC_Shading_Min_Elevation 14:6
Rollo.KUE02.ASC_Shading_Min_OutsideTemperature 14:7
Rollo.KUE02.ASC_Shading_Mode 14:1
Rollo.KUE02.ASC_Shading_Pos 14:2
values:
formated:
undef
ARRAY(0x3e17750)
ARRAY(0x3df1a00)
ARRAY(0x3dd6db8)
ARRAY(0x32f9fa0)
ARRAY(0x3de2540)
ARRAY(0x3de62c8)
ARRAY(0x3dd83a8)
orig:
undef
ARRAY(0x390b0a8)
ARRAY(0x27c24c0)
ARRAY(0x3de27c8)
ARRAY(0x3dde558)
ARRAY(0x2a00f28)
ARRAY(0x391b1f0)
ARRAY(0x3deaf30)
prefixsuffix:
undef
ARRAY(0x3e14528)
ARRAY(0x3a897b0)
ARRAY(0x38ccd18)
ARRAY(0x3e13160)
ARRAY(0x3ddf058)
ARRAY(0x3de47a8)
ARRAY(0x3dd6e48)
Attributes:
alias Rollläden: Beschattung
commands {ASC_Shading_Pos => 'ASC_Shading_Pos:knob,min:0,max:100,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round',
ASC_Shading_Mode => 'ASC_Shading_Mode:always,home,absent,off',
ASC_Shading_Direction => 'ASC_Shading_Direction:knob,min:0,max:360,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:1,cursor:true,lineCap:round',
ASC_Shading_Angle_Left => 'ASC_Shading_Angle_Left:knob,min:0,max:85,angleArc:85,rotation:anticlockwise,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round,angleOffset:270',
ASC_Shading_Angle_Right => 'ASC_Shading_Angle_Right:knob,min:0,max:85,angleArc:85,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:5,lineCap:round,',
ASC_Shading_Min_Elevation => 'ASC_Shading_Min_Elevation:knob,min:15,max:35,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:1,lineCap:round,angleArc:20,angleOffset:55,rotation:anticlockwise',
ASC_Shading_Min_OutsideTemperature => 'ASC_Shading_Min_OutsideTemperature:knob,min:5,max:25,width:50,height:50,fgColor:#FF9900,bgColor:#CCCCCC,step:0.5,lineCap:round,angleArc:120,angleOffset:270'}
room System->Rollosteuerung
Das Ganze ist aus dem Beispiel von https://wiki.fhem.de/wiki/AutoShuttersControl#Hilfsmittel (https://wiki.fhem.de/wiki/AutoShuttersControl#Hilfsmittel) (also selbst nur die Regex angepasst für die aktuellen TEST Devices. Ich weiß dass mein Probem daraus rührt:
STATE
<pre>
read1:closed
read2:closed
read3:closed
read0:closed
</pre>
So sieht mein state aus, in dem Fall wenn mehr als 1 icon benutzt wurde, ich hab nur keine Ahnung wie ich die readingsGroup dazu bekomme, das zu ignorieren :(
Einige Randinfos:
List vom Device bei dem die readingsGroup das tut was sie soll:
Internals:
FUUID 5c46de22-f33f-bea8-69d7-cd0c9dfd030d9ab5
NAME Rollo.KUE02
NR 72
STATE closed
TYPE ROLLO
stoptime 1555092967
READINGS:
2019-04-12 20:15:55 ASC_ShuttersLastDrive night close
2019-04-12 20:44:34 ASC_Time_DriveDown 13.04.2019 - 20:15
2019-04-12 20:44:34 ASC_Time_DriveUp 13.04.2019 - 06:49
2019-04-12 20:15:55 command pct-100
2019-04-12 20:15:55 desired_pct 100
2019-04-12 20:15:55 drive-type modul
2019-04-12 20:15:55 last_drive drive-down
2019-04-12 20:44:34 level closed
2019-04-12 20:16:07 pct 100
2019-04-12 20:16:07 state closed
Attributes:
ASC 1
ASC_Antifreeze off
ASC_Antifreeze_Pos 85
ASC_AutoAstroModeEvening none
ASC_AutoAstroModeEveningHorizon none
ASC_AutoAstroModeMorning none
ASC_AutoAstroModeMorningHorizon none
ASC_BlockingTime_afterManual 1200
ASC_BlockingTime_beforDayOpen 3600
ASC_BlockingTime_beforNightClose 3600
ASC_BrightnessMaxVal -1
ASC_BrightnessMinVal -1
ASC_Brightness_Reading brightness
ASC_Brightness_Sensor none
ASC_Closed_Pos 100
ASC_ComfortOpen_Pos 20
ASC_Down astro
ASC_Drive_Offset -1
ASC_Drive_OffsetStart -1
ASC_GuestRoom none
ASC_LockOut off
ASC_LockOut_Cmd none
ASC_Mode_Down always
ASC_Mode_Up always
ASC_Open_Pos 0
ASC_Partymode off
ASC_Pos_Reading position
ASC_PrivacyDownTime_beforNightClose -1
ASC_PrivacyDown_Pos 50
ASC_Roommate_Device none
ASC_Roommate_Reading state
ASC_Self_Defense_Exclude off
ASC_Shading_Angle_Left 75
ASC_Shading_Angle_Right 75
ASC_Shading_Direction 180
ASC_Shading_Min_Elevation 25
ASC_Shading_Min_OutsideTemperature 18
ASC_Shading_Mode always
ASC_Shading_Pos 30
ASC_Shading_StateChange_Cloudy 20000
ASC_Shading_StateChange_Sunny 35000
ASC_Shading_WaitingPeriod 1200
ASC_ShuttersPlace window
ASC_Time_Down_Early 15:30
ASC_Time_Down_Late 22:30
ASC_Time_Up_Early 06:15
ASC_Time_Up_Late 09:00
ASC_Time_Up_WE_Holiday 08:30
ASC_Up astro
ASC_Ventilate_Pos 70
ASC_Ventilate_Window_Open on
ASC_WiggleValue 5
ASC_WindowRec none
ASC_WindowRec_subType twostate
alias Rollo KÜ 2
automatic-enabled on
cmdIcon open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
devStateIcon open:fts_shutter_10:closed closed:fts_shutter_100:open half:fts_shutter_50:closed drive-up:fts_shutter_up@red:stop drive-down:fts_shutter_down@red:stop pct-100:fts_shutter_100:open pct-90:fts_shutter_80:closed pct-80:fts_shutter_80:closed pct-70:fts_shutter_70:closed pct-60:fts_shutter_60:closed pct-50:fts_shutter_50:closed pct-40:fts_shutter_40:open pct-30:fts_shutter_30:open pct-20:fts_shutter_20:open pct-10:fts_shutter_10:open pct-0:fts_shutter_10:closed
event-on-update-reading state
group Rollo
rl_autoStop 0
rl_blockMode none
rl_commandDown set Rollo.KUE02.ZU on;set Rollo.KUE02.AUF off
rl_commandStop set Rollo.KUE02.AUF off;set Rollo.KUE02.ZU off
rl_commandUp set Rollo.KUE02.AUF on;set Rollo.KUE02.ZU off
rl_excessBottom 2
rl_excessTop 1
rl_resetTime 0
rl_secondsDown 14
rl_secondsUp 14
rl_switchTime 2
rl_type normal
room Kueche
sortby 2
userReadings level { ReadingsVal("Rollo.KUE02","state",0) }
userattr ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessMaxVal ASC_BrightnessMinVal ASC_Brightness_Reading ASC_Brightness_Sensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_Drive_Offset ASC_Drive_OffsetStart ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownTime_beforNightClose ASC_PrivacyDown_Pos ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_Exclude:on,off ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_Min_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindowRec ASC_WindowRec_subType:twostate,threestate
verbose 2
webCmd pct
List vom device, bei dem es die RG verschiebt:
Internals:
CFGFN
FUUID 5cb0dba0-f33f-8d79-dbfe-e15f615b3cbfc3f3
NAME OG_RO_Testrollo
NR 9835
STATE <pre>
read1:closed
read2:closed
read3:closed
read0:closed
</pre>
TYPE ROLLO
stoptime 1555094530
OLDREADINGS:
READINGS:
2019-04-12 20:44:34 ASC_Time_DriveDown 13.04.2019 - 20:15
2019-04-12 20:44:34 ASC_Time_DriveUp 13.04.2019 - 06:49
2019-04-12 20:41:55 command stop
2019-04-12 20:41:53 desired_pct 100
2019-04-12 20:41:53 drive-type modul
2019-04-12 20:41:53 last_drive drive-down
2019-04-12 20:41:55 pct 100
2019-04-12 20:44:20 state closed
Attributes:
ASC 1
ASC_Antifreeze off
ASC_Antifreeze_Pos 85
ASC_AutoAstroModeEvening none
ASC_AutoAstroModeEveningHorizon none
ASC_AutoAstroModeMorning none
ASC_AutoAstroModeMorningHorizon none
ASC_BlockingTime_afterManual 1200
ASC_BlockingTime_beforDayOpen 3600
ASC_BlockingTime_beforNightClose 3600
ASC_BrightnessMaxVal -1
ASC_BrightnessMinVal -1
ASC_Brightness_Reading brightness
ASC_Brightness_Sensor none
ASC_Closed_Pos 100
ASC_ComfortOpen_Pos 20
ASC_Down astro
ASC_Drive_Offset -1
ASC_Drive_OffsetStart -1
ASC_GuestRoom none
ASC_LockOut off
ASC_LockOut_Cmd none
ASC_Mode_Down always
ASC_Mode_Up always
ASC_Open_Pos 0
ASC_Partymode off
ASC_Pos_Reading position
ASC_PrivacyDownTime_beforNightClose -1
ASC_PrivacyDown_Pos 50
ASC_Roommate_Device none
ASC_Roommate_Reading state
ASC_Self_Defense_Exclude off
ASC_Shading_Angle_Left 75
ASC_Shading_Angle_Right 75
ASC_Shading_Direction 180
ASC_Shading_Min_Elevation 25
ASC_Shading_Min_OutsideTemperature 18
ASC_Shading_Mode off
ASC_Shading_Pos 80
ASC_Shading_StateChange_Cloudy 20000
ASC_Shading_StateChange_Sunny 35000
ASC_Shading_WaitingPeriod 1200
ASC_ShuttersPlace window
ASC_Time_Down_Early 15:30
ASC_Time_Down_Late 22:30
ASC_Time_Up_Early 04:30
ASC_Time_Up_Late 09:00
ASC_Time_Up_WE_Holiday 08:30
ASC_Up astro
ASC_Ventilate_Pos 70
ASC_Ventilate_Window_Open on
ASC_WiggleValue 5
ASC_WindowRec none
ASC_WindowRec_subType twostate
alias 4Icon Test
cmdIcon open:fts_shutter_up closed:fts_shutter_down stop:fts_shutter_manual half:fts_shutter_50
devStateIcon read0.closed:fts_shutter:half read0.half:fts_shutter@yellow:closed read0.drive.*:fts_shutter@red:stop read0..*:fts_shutter read1.drive-up:rc_UP@red:stop .*read1..*:rc_UP:open read2.open:fts_shutter_10@green:stop read2..*10:fts_shutter_10:stop read2..*20:fts_shutter_20:stop read2..*30:fts_shutter_30:stop read2..*40:fts_shutter_40:stop read2.(.*50|half):fts_shutter_50:stop read2..*60:fts_shutter_60:stop read2..*70:fts_shutter_70:stop read2..*80:fts_shutter_80:stop read2..*90:fts_shutter_90:stop read2.closed:fts_shutter_100:stop read2.drive.*:fts_shutter@red:stop read3.drive-down:rc_DOWN@red:stop read3..*:rc_DOWN:closed
event-on-update-reading state
group Rollo
rl_autoStop 0
rl_blockMode none
rl_commandDown set OG_SZ_RO_01Rollo_AUF off
rl_commandStop set OG_SZ_RO_01Rollo_AUF off; set OG_SZ_RO_01Rollo_ZU off
rl_commandUp set OG_SZ_RO_01Rollo_ZU off
rl_excessBottom 2
rl_excessTop 1
rl_resetTime 0
rl_secondsDown 14
rl_secondsUp 14
rl_switchTime 2
rl_type normal
room Kueche
sortby 2
stateFormat <pre>
read1:state
read2:state
read3:state
read0:state
</pre>
userattr ASC_Antifreeze:off,soft,hard,am,pm ASC_Antifreeze_Pos:5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100 ASC_AutoAstroModeEvening:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeEveningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_AutoAstroModeMorning:REAL,CIVIL,NAUTIC,ASTRONOMIC,HORIZON ASC_AutoAstroModeMorningHorizon:-9,-8,-7,-6,-5,-4,-3,-2,-1,0,1,2,3,4,5,6,7,8,9 ASC_BlockingTime_afterManual ASC_BlockingTime_beforDayOpen ASC_BlockingTime_beforNightClose ASC_BrightnessMaxVal ASC_BrightnessMinVal ASC_Brightness_Reading ASC_Brightness_Sensor ASC_Closed_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_ComfortOpen_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Down:time,astro,brightness ASC_Drive_Offset ASC_Drive_OffsetStart ASC_GuestRoom:on,off ASC_LockOut:soft,hard,off ASC_LockOut_Cmd:inhibit,blocked,protection ASC_Mode_Down:absent,always,off,home ASC_Mode_Up:absent,always,off,home ASC_Open_Pos:0,10,20,30,40,50,60,70,80,90,100 ASC_Partymode:on,off ASC_Pos_Reading ASC_PrivacyDownTime_beforNightClose ASC_PrivacyDown_Pos ASC_Roommate_Device ASC_Roommate_Reading ASC_Self_Defense_Exclude:on,off ASC_Shading_Angle_Left ASC_Shading_Angle_Right ASC_Shading_Direction ASC_Shading_Min_Elevation ASC_Shading_Min_OutsideTemperature ASC_Shading_Mode:absent,always,off,home ASC_Shading_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Shading_StateChange_Cloudy ASC_Shading_StateChange_Sunny ASC_Shading_WaitingPeriod ASC_ShuttersPlace:window,terrace ASC_Time_Down_Early ASC_Time_Down_Late ASC_Time_Up_Early ASC_Time_Up_Late ASC_Time_Up_WE_Holiday ASC_Up:time,astro,brightness ASC_Ventilate_Pos:10,20,30,40,50,60,70,80,90,100 ASC_Ventilate_Window_Open:on,off ASC_WiggleValue ASC_WindowRec ASC_WindowRec_subType:twostate,threestate
webCmd :
Wie gesagt der Teil " (((EG|OG).*_RO_.*)||EG_WZ_Markise||Rollo.KUE02) " ist eigentlich so ziemlich das Einzige was ich geändert habe, aber das bezieht sich ja nur auf die Suche der jeweilgen Devices.
Ich würde mich sehr freuen, wenn mir jamand einen Tipp geben könnte, wie ich entweder in der readingsGroup die <pre> und Leerzeichen entfernen kann oder die RG dazu bekomme, das von vorne herein zu ignorieren....
Vielen Dank im Voruaus
Grüße
Andreas